Hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been not help.

hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been no help.

- Try restoring on another computer.
-  Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

  • I have updated to the new version of iPhoto but it will no longer let me edit text in the preset text boxes.  The text is highlighted for a nanosecond but will not stay highlighted so I can amend it.  Can anyone help me with this.  Many thanks.

    I have updated to the latest version of iPhoto.  But now iPhoto will not let me amend the preset text in the text boxes.
    the text is highlighted for a nano second but it will not stay highlighted so that I can add my own text.
    can anyone help me with this issue.
    Many thanks

    You might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
    If you want to go back to 3.6x, you will find it here:
    http://www.mozilla.com/en-US/firefox/all-older.html
    In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side.

  • I have several users who have updated to the new iOS 5 and now are unable to get to the apple store

    I have several users with ipads who have updated to the new iOS5 and are now unable to access the itunes store.  It loads about half way and then nothing.  Any ideas on how to fix this?

    Photo stream only keeps your photos for 30 days.  After that, they are removed from your photo stream but not from any device that has already received them.  Chances are, the 44 photos are from the last 30 days; the others are not there because they are no longer in your photo stream.
    If the photos were in your camera roll when you last backed up, restoring to the backup should recover them.  However, you will have to restore to the entire backup to do so.  If they weren't backed up or imported to your computer, there is no way to recover them now.
    To be sure your photos are saved, regularly import them from the camera roll to your computer as outlined here: http://support.apple.com/kb/HT4083.

  • HT1476 Since I have updated to the new version, iOS 7, I have noticed the battery does last long as it was in iOs 6. Some friends have the same problem May I know the reason?

    Since I have updated to the new version, iOS 7, I have noticed the battery does last long as it was in iOs 6. I have already updateed to 7.0.2 the latest version. Some friends have the same problem May I know the reason?

    You need to update iTunes to 11.1 on your PC

  • I have a MacBook Retina, and it won't upgrade to the new software (OSX Maverics). It will begin to download, but then say it can't finish the download. What should i do to fix this problem?

    I have a MacBook Retina, and it won't upgrade to the new software (OSX Maverics). It will begin to download, but then say it can't finish the download. What should i do to fix this problem?

    Your problem is really with "Time Machine", backup software included with OS X since version 10.5, not with your Time Capsule router.  For more information on Time Machine, check these Web pages:
    Time Machine FAQs
    Time Machine Troubleshooting

  • I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update, it says the latest version is unavailable to the U.S. I can't access photos

    I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update on iTunes, it says the latest version is unavailable to the U.S. I wouldn't mind leaving it be but I can't access any of my photos. What do I do?

    stuckoncc wrote:
    I updated the latest version of iOS software on my Macbook Pro
    iOS is on iPhones and iPads.
    Are you using an iPhone or iPad?

  • Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

    Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

    What is the size of your hard disk?  PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine.  Just a thought here.

  • Any Time I Open iTunes My Computer Comes Up With A Message Saying "Data Execution Prevention - Mircosoft Windows To Help Protect Your Computer, Windows Has Closed This Program" We Have Trend Micro Internet Security Titanium.

    Any Time I Open iTunes My Computer Comes Up With A Message Saying "Data Execution Prevention - Mircosoft Windows To Help Protect Your Computer, Windows Has Closed This Program" We Have Trend Micro Internet Security Titanium But It Appears To Be Windows Stopping iTunes.

    Right click My Computer > Properties > Advanced > Performance: Settings > Data Execution Prevention > Add iTunes to be let through

  • Hey there, whenever i try to start iTunes in my laptop amsg coming up saying : data execution prevention prevented iTunes from starting (Dep), would you Pls help me out.I have windows vista installed.

    hey there, whenever i try to start iTunes in my laptop amsg coming up saying : data execution prevention prevented iTunes from starting (Dep), would you Pls help me out.I have windows vista installed.

    No, i do not have quickTime player.
    I have tried to close dep off for iTunes but failed to do so as i got a msg that iTunes can't work without Dep in execution data prevention.

  • I changed my ipod password and now when i try to unlock my ipod it says wrong password. Is there anyway i can get into my ipod without restoring it?!?!?!?!?!?!

    I changed my ipod password and now when i try to unlock my ipod it says wrong password. Is there anyway i can get into my ipod without restoring it?!?!?!?!?!?!

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • Flash keeps crashing and now its saying data execution prevention has closed adobe flash player

    Flash has always given me alot of problems. adobe flash would ocassionaly crash through out the day. i usual refresh the page and its all good for a little while. but now its closing/crashing on every single page im going to. its also saying 'to help protect your computer, data execution prevention has closed adobe flash player'. i was using 11.9 r900. with all the problems i tried downloading the newer 12.0 r0. its made no difference.
    My computer is Windows vista 32 bit
    i use firefox
    problem originaly affected pages with videos on it but now its effecting every single page i open and i get tons of pop ups and alerts saying crashed, closed, stopped working.
    what can i do to stop this problem?

    DEP (Data Execution Prevention) is Windows "protecting you from yourself".
    http://windows.microsoft.com/en-us/windows7/Change-Data-Execution-Prevention-settings?Sign edIn=1
    The options to disable it are there... but "only if you trust yourself not to blow up the whole Internet" (sarcasm).

  • How do I get features to show up in general settings like iCloud and FaceTime? I also can't turn on location services for Siri. I have the new iPad and have updated to the new operating system. Please Help Me.

    How do I get features to show up in General Settings like iCloud and FaceTime and Location services to show up for Siri?

    SADLY  not as i downloaded an upgrad to my original PAGES/
    i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
    but what a waste of time as it doesn not save any changes done automatically back in the cloud....
    i am now downloading the new LION and hope that it will fix the problem
    i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
    and the same magic was supposed to happen in reverse.
    It doesn't/
    if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
    I hope the new lion will help resolve the isssue/
    any other ideas> keep em coming...thank you so much.

  • I have updated to the new ios 7 and the messaging has changed a bit how can i forward a message

    I have updated my phone to ios 7 and the messaging has changed a bit how can I forward a message?

    have you restarted the iPhone? if not, press and hold both the sleep and home button until screen goes black and apple logo come up, then release them. Let me know if that helped.

  • I updated my iTunes and now it wont let me open up my iTunes says there's an error and that I need to reinstall which I did but it keeps doing the same thing??

    I updated my iTunes and an error message popped up and now I can't get into my iTunes account on my computer? It says to reinstall which I did and it still has the same message? Anyone else have this problem and how can I fix it????

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Could not complete your itunes store request. unknown error occurred (-4)

    I synced my iPhone to my Macbook for the first time. When I connected the phone, iTunes opened and prompted me to login. I entered my Apple ID and password. Then, I synced my contacts and music to my phone.
    Afterwards, I disconnected my phone from the computer and tried to download a free app. My phone prompted me to enter my apple username and password. I tried entering my Apple ID and password but access failed. So my first question is, is the Apple ID the same thing as an Apple account? Can I use it to login and download apps on iTunes?
    Secondly, I tried creating an account on iTunes by selecting the button and an error message popped up. It said
    'we could not complete your itunes store request. an unknown error occurred (-4). There was an error in the itunes store. please try again later.'
    I'd love some help on this so I can start using my new phone =)

    I found out how to sign up!

Maybe you are looking for

  • Drag and Drop export of vcards to Mail no longer works in Snow Leopard

    In 10.5, you could drag a vcard from the Address Book application, drop it on the Mail icon on the dock, and the vcard would be automatically attached to a new mail message. This no longer works in 10.6. Tested on a G4 iMac running Leopard and a Mac

  • MacBook Pro won't turn on after crash. Magsafe charger LED light blinking rapidly

    Hi. I hope you can help me. I have a macbook Pro 13", from september 2012, which crashed earlier today: I was charging my iphone through USBport on my macbook (not an Apple USB-iPhone power-cable) . My MacBook was charging through the magsafe charger

  • Over-protected external HDs-now can't see them :(

    Folks I "protected" my External HDs in 'Ownership and Permissions" whilst my grandkids were wanting to "play" on my G5, but I must have overdone it because now I can't see them on my Desktop to UN-protect them! Can anybody help get 'em back, please?

  • Party & Service without Party

    Hi all,          We have a Party and service without party options in Integration Directory.What is the differece between those two options. In which situation we can use those options. Thanks & Regards, sekhar

  • Complex Custom Planning function

    Hello, I need to implement a complex custom planning function, in which certain calcualtions are to be done. Data is available in the actual cubes and calculation logic is in a table and also it requires several validations to generate plan data. For