Hello.  I recently pieced together a late 2008 MacBook Pro 15".  Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.

Hello.  I recently pieced together a late 2008 MacBook Pro 15".  Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.
I have reset the NVRAM and the SMC a couple of time but that didn't work so I ran an Apple Hardware Test and while testing the logic board it gives the following error:
4SNS/1/40000000 LB1T
I've done some research and found this is a temperature sensor related to the battery, but cannot find where the sensor is located in the computer.  Would you know how I can find the sensor to test it?  Could my battery problem be related to something else?  Would a fresh install of Lion help?
Thank you!
Mike
Two pieces of information that may or may not b helpful, the hard drive is from my early 2008 MBP and the only test disc I have access to is from an iMac.

Why do you have LION installed on that older machine?
So you say you built a macbook from a bucket of parts eh?   Kudos
heres a pic of the battery temp sensor

Similar Messages

  • I just got a brand new 13" Macbook pro with Lion and the battery life is terrible. i just got a brand new macbook pro 13in a few weeks ago and everything is fine except the battery life is terrible!

    i have seen many other threads about this, but i just want to know if anyone has found a fix that actually works? or do i just need to wait for apple to send a fix in their next update?

    Suppose you elaborate on what you are doing with the MBP that makes the battery life terrible.

  • Replacement hard drive for late 2008 Macbook Pro

    I need to replace my drive in a late 2008 Macbook Pro 15".  I can access the battery and what looks like the hard drive from the underside, if this helps.  Would this be a good replacement choice?
    http://www.newegg.com/Product/Product.aspx?Item=N82E16822136279
    Finding exact specs for the drive has been tricky, or maybe I just need to have the physical size verified.  What I know/have found is:
    5400rpm       (would a 7200rpm improve performance, or am I limited by hardware?)
    SATA II        (does this matter tese days?)
    2.5" drive   (needs verification)
    open drive?  (do I need this or not?)
    Any other options or advice?  I'd like to spend a small amount since this is an older computer and won't be around a whole lot longer anyway.  Thanks in advance!

    The link you posted above is for a WD drive,....dont get it.   WD drives (some) have SMS sensor coflicts with Mac, and the consumer grade western digital HD are the worst you can buy.
    Same as used by Apple below, best option, cheapest price.
    best likewise replacement 1TB 9.5mm Toshiba
    http://www.ebay.com/itm/Toshiba-1TB-MQ01ABD100-HDKBB96A1A01-2-5-5400RPM-Laptop-N   otebook-9-5mm-HDD-/171120091488?pt=US_Internal_Hard_Disk_Drives&hash=item27d78d 6 160
    $68
    Stockdizzle 
    I will need to clone the current drive before it fails; is there an article in this forum on that?
    Easy, 3 clicks and sit back and let Superduper CLONE your HD.....about 40 mins average.
    Superduper is free and most of the pros use it (or carbon copy cloner)
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    See instruction and get software there<     very very easy to do

  • Crack in screen (late 2008 MacBook Pro)

    Hello everyone,
    I have searched the 'net and this forum about cracked screens, and have found a lot of useful information, but wanted to post this and ask a few questions anyway, as I haven't found exactly what I am looking for.
    My late 2008 MacBook Pro screen cracked just tonight. The crack begins near the bottom left, in the black border along the bottom, horizontal edge of the screen. From there, it goes up a few cm above the black border, curves to almost horizontal, and then curves and goes back down to the horizontal edge, about 2 inches from where it began.  So, it is a very small crack that goes up from the bottom edge, over just a little, and then right back down to the edge. It is barely noticable doing normal work. The crack can not get longer since it goes up and back down to the edge. I suppose the only way it could get worse is to deepen (you can barely feel it) and cause other problems. I tried to take a picture for this thread, but the crack doesn't even show in a picture. My questions:
    (1) If I don't get this fixed, what are the chances it will damage the display over time? Will it create lines and/or green/blue/etc. spots or anything else? Could it cause other problems to the computer?
    (2) What do you reccommend as the best way to go about fixing this if I decide to do so? I know my local Apple Store will fix it, but I also know they'll charge more than I probably want to spend. Other solutions? Positive experiences?
    It kind of saddens me to see it; crazy as that may sound! This has been (still is) a great notebook (I even purchased AppleCare, which I never needed) that went with me through making my first full length film.
    Thank you in advance for help concerning this issue.

    I uswed to have that problem in my Macbook OPro early 2008, and I ordered an LCD panel, it's a Samsung 15.4 inches LED panel, then I disassembled MBP, involved more than 40 screws and very delicate parts removal and reassemble. It cost me US$ 120 and 2.5 ghours to do.
    But if you take it to Mac Service Center, they will change the whole lid and thjat will copst you more than US$ 600

  • Late 2008 Macbook Pro: Which power adapter?

    Hello all. I have a Late 2008 Macbook Pro 15", MacPro5,1. A few months back my dog ate the power adapter (unplugged, thankfully.) I thought I did the proper amount of research to order the correct adapter from a third party on Amazon, because I'm pretty darn broke and need to save every penny I can. When I got the adapter, the connector was different from the one that came with my Macbook Pro. It was 85W, all the numbers matched up, but the style was different. But, the plug worked enough to let me get the work done that I needed, so it didn't concern me too much.
    That is, until this cord just stopped working. That's what I get for getting a third party cable from China off Amazon.
    So now, I'm trying to research again to make sure I'm getting the right cable, and I want one that's made by Apple, and is exactly like the one that came in the box when I bought my Macbook Pro new. I went to MacSales.com and checked their compatibility pages, and ran into some issues. What is showing as compatible with my Mac is the 85W Magsafe MC556LL/A, but this is shown with the incorrect connector (like the one I got off Amazon.)
    When I looked at the other adapters that were available, I found the MagSafe 2 85W MD506LL/A, which has a connector that looks like the original, but it only shows as compatible with 2012+ Retina Display Macbook Pros.
    So, do I have to buy the MagSafe that is not like the original that came with my Macbook Pro, or can I get the MagSafe 2 that does match what I got out of the box?
    Reference pages from MacSales.com:
    http://eshop.macsales.com/item/Apple/MC556LLA/
    http://eshop.macsales.com/item/Apple/MD506LLA/

    Thanks! I didn't realize there was a revision, but that makes sense. I guess I don't understand they would change it, then use the original design for the later Retina Display models. Oh well, as long as it works!
    On a similar note, is OWC the best option for a cheap Apple-brand adapter? They're selling them for $47, when the cheapest I can find anywhere else is like $75. They seem pretty reputable with all the options and Apple-specific stuff they offer, I just didn't want to make the same mistake again and would like other options if they are available.
    Thanks again!

  • I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card)

    I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
    Things to note:
    I have been unable to update firmware on this computer for about a year now. Im not sure why.
    I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
    any thoughts on the matter would be greatly appreciated, thank you.

    Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
    It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
    Clinton

  • Renewing a Late 2008 MacBook Pro: hard drive and battery substitution

    Hi all,
    I am an happy user of a late 2008 MacBook pro.
    However, with the passing of time, it became slow and the battery also deteriorate (it still quite OK, but it is not like at the beginning).
    But let's start from the beginning: the hard drive
    By googling for a while, I noticed that several people experienced very slow performance of their late 2008 MacBook Pro. That is also my case. Apparently, this is due to the hard disk which is dying, and then I considering to change it. However, I haven't found answers to these questions:
    - Is it possible to mirror all the containt of the current disk to the new one?
    - I only have the original installation disks of the first Leopard. I made all the updates through the network. Moreover, since it passed lot of time, I am afraid that some sector of the installation disks may be damaged. This means that I may fail in the installation of Mac Os X on the new hard drive. If I have to reinstall everything from scratch with the new hard drive and without installation disks, how should I do?
    - If I go a Mac Reseller shop, will do they perform this operation? And how much does it costs to make it? Or I may also go to some generic computer reparation guy?
    - Is it convenient to save all the data (movies, documents, pictures, emails, etc) somewhere (e.g. external HD) and then perform a completely new installation?
    Next, let's consider the battery.
    Here is a screenshot taken with iStat Pro:
    Do you think it is worth changing it? From System Profile I have those other info:
      Full charge capacity (mAh):          3386
           Current (mA):          846
           Voltage (mV):          12029
      Condition:          Replace soon
    What do you suggest to do then? How much does it cost a new battery? Actually, I think that also the processor performance deteriorate (it often becomes very hot, especially when watching Flash or Silverlight stuff), but, unfortunately I cannot change it.

    Hi!
    Thanks for all the answer. Please let me to resume this old and interesting discussion.
    After having evaluated several solutions (including NAS, different ways of backup, etc) I bought an external firewire HDD, since I believe it nicely fits my necessities. Next, after these holidays, I will finally replace my old HDD with a SSD one. I think 120 GB are ok. I just need the apps and small-sized documents (rather LaTeX, Matlab, word, pages or excel documents, etc. - no movies or mp3 (I have Spotify, for that) ). Large files (e.g. movies, pictures, etc) may end up in external firewire HDD.
    Now, let's consider the OS. I currently have 10.6.8 and I am very satisfied of that. I find it very stable, and all the apps I need are still well supported. On the other hand, given that there are like 5 years that I have the same installation, I may have a lot of obsolete files and setting that I can safely remove. This means that once I will have performed a backup of my documents, my email, my pictures etc. I can safely throw away all the rest. Hence, I may perform a brand-new installation of the OS. Although I am happy with 10.6.8, I was wondering if it is worth to upgrade it (I have a 2.53 Ghz Intel Core 2 Duo - 4 GB 1067 Mhz DDR3 RAM) to Lion, Mountain Lion or Mavricks. In that case, which would be the real benefits? And what about the cons?
    Finally consider that I only have the Leopard installation disks from 2008 (not even Snow Leopard) and I will bring my laptop to a techician to change the HDD (I know, it is simple but I don't have all the screws etc. and I will not buy them only for this purpose). Once he will have replaced the HDD, will he re-install the OS also? Or I have to reinstall the OS through my original DVD (5 years old, I don't even know if they still work) and upgrade to Snow Leopard again by myself? I would exclude the carbon copy solution since I may want to throw away a lot of garbage and perform a brand new instalation of the OS. How to proceed? Thanks again!

  • I have a late 2008 Macbook Pro last updated to Mavericks OS.  The screen died and it's not worth replacing.  How do I remove the hard drive and use a drive sled to access info I need?

    I have a late 2008 Macbook Pro last updated to the Mavericks OS.  The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model.  I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need?  What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases.  How can I accomplish this?
    My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive.  Is there a way to just access just my hard drive without interfering with hers?
    I know this is lengthy.  Thanks to whoever looks at this and offers advice/instruction.

    the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
    A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later.  A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
    The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files.

  • Just updated from a late 2008 Macbook Pro and I am getting a blink on my external screen

    I just upgraded from a late 2008 Macbook Pro with a  AMD Radeon HD 6770M 1024 MB graphics card and I am now getting a blink (black screen) every few seconds.
    Anyone know a fix.
    Thanks

    You could always give it a shot - the only problem that you might run into is that the the early 2011 might not boot when the hard drive is swapped from the 2008 hard drive. Some versions of OS X are simply not compatible between different models.
    But it's worth a try...
    Clinton

  • How much ram can I add to my late 2008 MacBook Pro? I run Mavericks and just got a new inexpensive hard drive. RAM is not very expensive so Thought I would bump it up from the current 2MB of 1067 Mhz DDr3

    How much ram can I add to my late 2008 MacBook Pro? I run Mavericks and just got a new inexpensive hard drive. RAM is not very expensive so Thought I would bump it up from the current 2MB of 1067 Mhz DDr3

    Maximum Memory
    8.0 GB (Actual) 4.0 GB (Apple)
    Memory Slots
    2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

  • HT4718 I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive,crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?

    I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?

    A 2008 Mac won't have originally shipped with Lion. You need to install 10.6.8 on the computer, log into the Mac App Store with the Apple ID you used to purchase Mountain Lion, click on the Purchases tab, and download it.
    (121465)

  • Late 2008 MacBook Pro "blackout" screen flickering - Revised

    --NOTE: I have written this thread as a continuation of the following thread, as the solution in it is slightly different from my issue. I apologize to the community for the confusion. http://discussions.apple.com/thread.jspa?threadID=2230532&tstart=0 --
    Many of us Late 2008 MacBook Pro owners have been experiencing a moderate to significant screen flicker when using our MacBook Pros in Better Battery life mode, which uses the 9400 M chip. While I had thought that 10.6.2 had resolved this issue, I have since discovered that it has not. In fact, some believe, myself included, that it has made it worse, as, for me, it has been happening far more frequently.
    My screen flicker is like a black frame popping in randomly. This frame does not even last a second, but it does create a "flicker" effect.
    These YouTube videos show it best and are virtually identical to mine.
    http://www.youtube.com/watch?v=SNQofnQKrDA
    http://www.youtube.com/watch?v=EATI_kh6GOw
    http://www.youtube.com/watch?v=qODFFWbiGUI
    *Does anyone think that this is indicative of a logic board problem?*
    *Has anyone resolved this by going back to 10.5.8?*
    I had never experienced this in Leopard.
    Thanks.

    Hi Luke,
    Having the logic board replaced terrifies me, as that could lead to further issues.
    I think you've rationalized out the whole situation perfectly, and I do think you're right about the logic board replacement. If the issue were a lot more frequent (or becomes more frequent) and/or is overly annoying then I would have it replaced. The chance that you'd get a bad replacement logic board would be sufficiently small in comparison to the overall pain and frustration that you'd be going through.
    What I possibly can do is try to get the issue looked at by someone at Apple. If it is, indeed, a software issue, perhaps they can engineer a fix for you. At the very least we'll know that the issue was brought to someone's attention! They probably will never contact anyone with the outcome, but at least we can say we tried. You should continue to submit the Bug Reports and encourage others to.
    --Travis

  • Late 2008 MacBook Pro - Bootcamp (Vista-32bit) issues

    Hey all -
    I have a couple issues with my late 2008 MacBook Pro when I use bootcamp to switch to its Vista (32 bit) side.  I've never been able to solve these issues myself, so I was hoping I could get some help here.
    When on the vista side, when I close the lid the computer display will shut off but the actualy computer will continue to run, and after some time I will no be able to wake it from its sleep.
    When I try to turn the brightness down on my screen, it will turn down but then turn back to full brightness a few seconds later.
    Scrollng with 2 fingers on the track pad is erratic (I read there was going to be a fix for this?)
    The laptop gets so hot to the touch that it is almost painful (I imagine this can't be good for the computer)
    It has also become sluggish to the point where even simple games and those on steam won't work without incredible lag.  Are there anyways to stop some processes to speed up the vista side?
    Like I said, this is all while in bootcamp, not experiencing any of the issues on the OSX side.
    Thanks for any help

    Would love some help if anyone knows

  • Firewire ExpressCard unuseable on late 2008 Macbook Pro!?

    I bought a Texas Instrument bases ExpressCard for Firewire 400 in order to make my RME Fireface work on the late 2008 Macbook Pro (MBP), since the onboard LSI/Agere chip doesn't like the Fireface 400.
    Result:
    1. It made OS X freeze out of the blue several times.
    2. It is not possible to install it on bootcamped Vista at all.
    3. And it leads to upto 30% performance loss on XP.
    I did some web search and found a post of someone who tried six (6!) different ExpressCards on Vista and all showed the same "No free resources" error when using Bootcamp. I found no way to solve that and it's likely a problem of the "BIOS".
    Also the card (or likely the MBP) made OS X freeze several times and behaves erratic the other times: like not being detected, being detected as new second ExpressCard Firewire Network eventhough it is already in the list. I suspect this to be an electrical problem. To my astonishment the card can be pulled out easily when it should be fixed inside the slot without pushing on it first to unlock it. This always leads to freezing (who wonders)!
    Hot plugging the ExpressCard itself on Windows XP is not possible, the driver will shot "Not enough free Resources" just like on Vista until you restart Windows/the MBP.
    Hot Plugging cables on my Firewire ExpressCard does not work properly on OS X or Windows XP. On OS X it only recognizes the Fireface to unplug/replug on the ExpressCard if I plug/unplug the Firewire Repeater on the buildin FW800 port. That may be a Fireface driver issue though. On XP it only seems to work by turning off the MBP before plugging the Fireface to the ExpressCard (simply Restart does not seem to work).
    ExpressCard on late 2008 MBPs seems to be a mess, but I lack comparison with other cards. Maybe some other people with working ExpressCards can give some feedback?
    Fortunately the Fireface is useable via some Fireface Repeaters: external HD, HUB, or in my case a simple Lindy Repeater Cable (aka cable with inbuild repeater).

    Now this is a bit shocking:
    Having only inserted the ExpressCard leads to 10-20% CPU load (pure system load, not produced by any process) on XP as long as the ExpressCard driver is active (standard Windows TI Firewire driver).
    The extra system load completely vanishes once you load the CPU to maximum, but when using Ableton Live even over the inbuild FW800 port performance is at least 30% lower as long as the ExpressCard driver is active.
    Even more disturbing the performance loss is happening because the actual CPU load of Live itself is alot higher with the very same load compared to not having the ExpressCard active! :-O
    To underline the most curious fact about the latter: It also happens when the ExpressCard isn't even used, it's just inserted alongside the other FW port.
    I would like to get some feedback from other late 2008 Macbook Pro users about their own experience with ExpressCards. For me ExpressCard Firewire seems to be out of question under these circumstances. Fortunately the hub/repeater solution works with the inbuild LSI/Agere FW800 port.

  • How to update graphics card drivers for late 2008 macbook pro with Nvidia 9600m GT?

    Can anybody help me update the drivers for my 9600m GT graphics card for my Late 2008 Macbook pro? I am running OS X Lion 10.7.5 with a Windows 7 partition. I have tried finding support on Nvidia's website, but at least for the 9600m GT, it isn't supported for my operating system. Would I have to update it from my Windows side? And if so, would the update apply to my OS X side as well? I have a little computer knowledge, but nothing indepth.

    Welcome to Apple Support Communities
    In OS X, Apple provides the GPU drivers and you cannot update them from NVIDIA. They are updated with each OS X update, so you are running the most recent drivers for your OS X version. OS X Mountain Lion and Mavericks have got more recent GPU drivers, but it's not worth upgrading unless you need newer drivers for an app (I highly doubt this).
    However, you can update the GPU drivers in Windows, and you should do it to get the best performance. You can download them from the NVIDIA site > http://www.nvidia.com/Download/index.aspx?lang=en-us Note that drivers are only applied in the operating system you are installing them, so they will not be installed in OS X

Maybe you are looking for