Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the

Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new elements I cannot find it.

markc
What computer operating system is your Premiere Elements 13/13.1 running on?
Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
for the Contact Sheet.
Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
If you used Edit Menu/Add Caption beforehand, I can see how you can get
Date
Caption
Filename
under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
where you are going to get a title for each of the contact sheets.
Any questions or need clarification, please do not hesitate to ask.
You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
Please let us know if we have targeted your quesiton..
Thank you.
ATR

Similar Messages

  • Hello, I would like to create and print a contact sheet in Photoshop Premier Elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show u

    Hello, I would like to create and print a contact sheet in Photoshop Premier Elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new Premiere Elements I cannot find it.

    markc
    What computer operating system is your Premiere Elements 13/13.1 running on?
    Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
    for the Contact Sheet.
    Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
    If you used Edit Menu/Add Caption beforehand, I can see how you can get
    Date
    Caption
    Filename
    under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
    where you are going to get a title for each of the contact sheets.
    Any questions or need clarification, please do not hesitate to ask.
    You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
    at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
    Please let us know if we have targeted your quesiton..
    Thank you.
    ATR

  • Hi I have had problems with photo's and films going onto a 2010 Apple classic MP3.  Have managed to sort photos but it still refuses to copy the films purchased. It comes up with not copied cannot be played on this ipod.

    Hi have had problems with photo's and films going onto a 2010 Apple Classic mp3. Have managed to sort photo's but the films won't copy and comes up with message videos not copied cannot be played on this ipod

    razzbust wrote:
    ...but the films won't copy and comes up with message videos not copied cannot be played on this ipod
    Self explanatory.
    You could try creating an iPod version of the films.
    Use CTRL and B to display the Menu bar shown above. Alternatively, use the ALT key, followed by the F key, the W key and finally the I (eye) key - that's (menu)/File/Create New Version/Create iPod or iPhone version.

  • TS4058 HELLO I WOULD LIKE TO CREATE AN IWEB but I cannot create a .mac account help please?

    Hello,
    I am having trouble trying with publishing my iWeb site however I am taking to log in screen for the .mac account and cannot log into it. I am not sure if I have one created. I created one through iChat I believe but it is still giving me an invalid account name or password after submitting the website to be published. Can anyone help please? I am currently using a Macbook 2008 series with Leopard 10.5 OS... thank you, Sahara

    iChat and MobileMe are NOT the same thing.  .Mac does not exist and has not now for several years - it is MobileMe instead, but unless you already have an account which is sounds as if you don't, then it is too late. You can't get one now.
    If you want to publish your site, then you'll have to find a domain name registrar and register a domain name of choice and then purcahse hosting too and then you can publish by publishing to a local folder and then uploading using an ftp client such as Cyberduck.
    Start by taking a look at http://www.godaddy.com or http://www.hostexcellence.com where you can register a domain name and purchase hosting.
    MobileMe will no longer exist as of 30th June this year - it is going and iCloud has taken over, but will not host websites so everyone on this forum is having to search for alternative hosting.
    Perhaps do a search of this forum for the relevant topics.

  • Would like to create a script for list all elements and structure of an indesign document

    Hello everybody,
    I'm a very beginner in indesign scripting.
    I would like to create a script in order to list all elements and the inner structure of a n indesign document.
    The aim for me is to understand how elements are sorted and arranged into indesign, and be able to find an specific element by its item name.
    The output document could be an xml or txt document with a treeview structure.
    I would like have a rough idea of which kind of javascript code I should use for that.
    Thanks for answers.

    Hi Ossydoc,
    You can use Muse to create such a website. All you need to do is, create links in Muse for the sermons and select  " link to File " in the hyperlink option and link to those Mp3 files.
    Please refer to this screenshot :- http://prntscr.com/4xvdup
    Now, when you publish your site,  Muse would automatically upload those files onto the server and the users would then be able to listen as well as download those sermons using the links on your site.
    Hope this helps
    Regards,
    Rohit Nair 

  • Would like to create a file upload facility in a form based on stored procedure

    Hello,
    I would like to create a 'File Upload' in a 'form based on stored procedure'. The version of portal that I am running is 3.0.7.6.2. In this version, only 'form based on table' has the ability to upload files. Or is it that I am missing something?
    Please let me know if this is possible in higher versions of portal.
    Thank you for your help.
    Jayasree

    I have kin od fdone this by using the additem fucntion, if you look at the HTML of the add file page, you can see the parameter that are required for the form.

  • HT204266 hello i would like to know why my gnome village app as stop working since ihave done a up date to ios6 on my ipod touch

    hello I would like to know why my gnome village app as stop working since I have done a software up date to a ico6 on my ipod touch

    iOS: Troubleshooting applications purchased from the App Store
    Have youwent to the developer's site?

  • Hello, I would like to buy an I Pod Classic 160 GB and have heard that the volume limit in Europe has been reduced from the factory. Are the devices in the U.S.A also affected?

    Hello, I would like to buy an I Pod Classic 160 GB and have heard that the volume limit in Europe has been reduced from the factory.
    Are the devices in the U.S.A also affected?
    Volker

    No, they are not. But getting round this is not that simple.
    Until recently, the European Volume Limit that you're referring to affected iPods sold within the EU (European Union countries), so one purchased in the US would not be affected by this. Nor, in theory, would an iPod purchased in Norway or Russia, since neither of them are in the EU.
    However, iPod Classics now sold within the UK (where I live) now appear to have an option to disable the EU Volume Limit. I would assume therefore, that this option is available on an iPod Classic bought anywhere within the EU. The firmware on an iPod Classic that can turn off the EU volume Limit is 2.0.5.
    iPod Classics running earlier versions of the firmware (including 2.0.4) cannot be upgraded. I have personally seen one with 2.0.5 Mac on it in an Apple Store and the EU limit could be turned off. Check the picture from Badgorr in this thread New Option to turn off EU Volume Cap?  (It's towards the bottom of the page.) However, non-Apple stores may still have older stock, so be aware of this when you go shopping.
    Experience tells me that buying an iPod from outside the European Union area is not that simple and you are unlikely to manage it. Apple will not ship goods to another country. So either you travel to the US to buy one from a shop (that's a bit extravagant) or you persuade someone else to buy one and send it to you. However, not only will you have the cost of shipping, but in either case, your country's tax department will almost certainly add tax to it when it comes into the country. The service delivering it will apply the tax and charge you for doing so as well or you get charged by the customs department at the airport.

  • Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this

    Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this is indeed possible?

    This forum thread appears to point towards the problem.
    Re: Unable to Switch Audio Sync Settings

  • Hello I would like to unlock my iphone 4s because it has not unlocked and I use it on other networks if there is such a possibility I greet

    Hello I would like to unlock my iphone 4s because it has not unlocked and I use it on other networks if there is such a possibility I greet

    You need to contact the network provider to which the phone is locked. No-one else can do it for you.

  • I would like to create a pop-up window appear from Labview Interface. In this window, I will have a slide control and an image taken from a camera. The main VI have to run while pop-up window is open. How can I do ?

    When I pushed a button, this pop-up window has to appear. There will be a slide control and a picture from a camera in this window. Is it possible to make appear this windows while main VI Interface continue to run ? How can I do this ? Thank you for your answers.
    Cyril.

    Here you go. This is simple example. Maybe not the best way, I am just
    beginner in LV and still not comfortable with data flow that much. I prefer
    events, so I would change this to use Event Structures.
    When you click on OK button on SliderMain, it opens Slider.vi. Now both
    windows are open and you can interact with both. Now if you click on OK
    again with Slider.vi open, you run into problems. Only thing I did was
    change VI properties of slider.vi, mainly window appearance.
    vishi
    "Cy" wrote in message
    news:[email protected]..
    > I would like to create a pop-up window appear from Labview Interface.
    > In this window, I will have a slide control and an image taken from a
    > camera. The main VI hav
    e to run while pop-up window is open. How can I
    > do ?
    >
    > When I pushed a button, this pop-up window has to appear. There will
    > be a slide control and a picture from a camera in this window. Is it
    > possible to make appear this windows while main VI Interface continue
    > to run ? How can I do this ? Thank you for your answers.
    > Cyril.
    [Attachment SliderMain.vi, see below]
    [Attachment Slider.vi, see below]
    Attachments:
    SliderMain.vi ‏16 KB
    Slider.vi ‏11 KB

  • Hello I would like to ask I have a problem with the Iphone 3gs 32 g I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank you

    Hello
    I would like to ask I have a problem with the Iphone 3gs 32 g
    I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank you

    Did you already try the suggestions from this article?
    Symptoms
    In certain situations, iPhone may present one of the following symptoms:
    "Invalid SIM" or "No SIM Card installed" alert appears intermittently.
    Status bar displays "No Service", "No SIM" or "Searching" in a location with good network coverage.
    Resolution
    If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
    Update your iPhone to the latest version of iOS.
    Toggle Airplane mode On and Off.
    Try turning iPhone off and then on again.
    Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
    Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
    Restore the iPhone.
    copied from iPhone: Troubleshooting No Service or No SIM

  • How to create and print contact sheet using photoshop elements 10?

    how to create and print contact sheet with photoshop 10?

    Which operating system are you using?
    On a windows system you can use the Organizer
    http://www.dummies.com/how-to/content/how-to-print-contact-sheets-in-photoshop-elements-.h tml
    On a Mac, File>Contact Sheet II within the pse 10 editor

  • I would like to create a form that gives the user opportunities to provide information on as many as 50 projects. Does Adobe FormsCentral allow for this "expandable" type of form, such that if someone only has 10 projects, they can complete the form as ea

    I would like to create a form that gives the user opportunities to provide information on as many as 50 projects. Does Adobe FormsCentral allow for this "expandable" type of form, such that if someone only has 10 projects, they can complete the form as easily as someone with 50 projects. In other words, is there a way to make the form "expandable?"

    Hi Ms Buckner,
    Yes, you can do this with the Show/Hide "Skip" logic rules.
    1. Suppose, for example, you have your first ten projects showing by default.
    2. At the end of those fields, you would have a Yes/No question asking if the person wanted to add more projects.
    3. If they answer "No", they move on to the next section/area/question/etc.
    4. If they answer "Yes" you have the form display ten more project fields that you had already included, but you had hidden up to this point.
    5. Repeat steps two, three, and four as often as needed. (It helps that you can copy and paste fields, including groups of questions, so you don't have to manually re-create them each time.)
    It means you must anticipate the maximum number of times you want to provide project fields, but you've already done that, and you have to build the form with that maximum number, but only display smaller portions at a time until they have filled in all they need.
    I hope that helps,
    Brian

  • How to insert page breaks, I would like certain rows to print on a new page  I am making a childrens dictionary and would like to to automactically print each letter on a new page.  is this possible?

    How do I insert a page break on certain rows in a Numbers spreadsheet.
    I am making and always updating a childrens dictonary and would like to be able to hit print and have each letter start on a new page.
    Is this possible?
    Thanks

    AM,
    Set your view to "Print View" and you will see the individual pages. More pages will be added as you drag content away from the existing pages.
    Arrange your content as you would like to see it printed. That's it. What you see is what will print.
    Jerry

Maybe you are looking for