Hello , ive reset my iPhone 5 and the option i selected was the one where all you content gets removed as i wanted , but now my screen has bona black and all that appears is the white circular loading sign which keeps spining. it won't stop ? help?!
hello , ive reset my iPhone 5 and the option i selected was the one where all you content gets removed as i wanted , but now my screen has gone black and all that appears is the white circular loading sign which keeps spining. it won't stop ? help?! im not able to access my iphone becasue of this and i dont know what to do
I just tried deleteing every smart mailbox and re-constituting a few. This went OK until I made one that had to reference a Gmail IMAP 'folder' and as soon I did that ... BAM! ... the infinite spinner appears.
Similar Messages
-
My iphone 5 has just had an update for candy crush and ever since i opened it the screen has been black and I can't get it to do anything what can I do?
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.) Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Delete the App, then reinstall it.
Test the issue after each step. Make sure to quit the app as described before each followup step. -
We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years). The screen has gone black and wont turn on. Phone was charged. I have tried force quit- home screen and top button. iTunes is not recognizing phone when I plug into computer. help pls
FIRST charge with an Apple charger for at least 15 minutes. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears. Hold for up to 30 seconds. If nothing happens the phone hardware has failed.
-
my iphone4's screen has gone black and i have received a new warrenty
If this is a Verizon iPhone 4, there is no SIM slot.
For non-Verizon iPhone 4, the SIM is on the right side.
Push a paperclip inbto the hole to eject the SIM tray.
-> iPhone and iPad: How to remove the SIM card -
just update my mac it said "critical update" something like that so i updated and now my screen has like random dots all over and the colours are all messed up its like negative can someone please help?
Adds the ability to make and receive FaceTime audio calls
Adds call waiting support for FaceTime audio and video calls
Adds the ability to block incoming iMessages from individual senders
Improves the accuracy of unread counts in Mail
Resolves an issue that prevented Mail from receiving new messages from certain providers
Improves AutoFill compatibility in Safari
Fixes an issue that may cause audio distortion on certain Macs
Improves reliability when connecting to a file server using SMB2
Fixes an issue that may cause VPN connections to disconnect
Improves VoiceOver navigation in Mail and Finder
Provides a fix for SSL connection verification
this was the update
never said anything about the screen -
My Energy Saver section of system preferences does not show the option to choose between energy saver or higher performance. I'd like to maximize my performance... any idea how to do that or why the option isn't showing up?
Mac video card performance
-
when i upgraded my iphone to the new update My iphone 5 screen went completely black and has been like it for 2 days. I have tried holding home and lock,I have tried holding lock and the volume, and I have tried holding just the volume, it still just stays black.
When i plugged it into my Mac the apple logo comes up on the iphone screen. and then on the computer it says itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes. (as in the below pictures)
when i click ok to restore it just says waiting for iphone (as in the other photo below). i left it in for 20minutes and still said the same thing.
after that i tried unplugging the iphone and it just went back to being a black screen again if anyone has any idea please please help me, thank you.I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
- Place the iPod in DFU mode and then restore it>
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Use this program to get it out of recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov -
My Ipad 2 Screen Has Gone Black and All The Suggested Solutions Arent Working!
Last night, I went round to my friends. he doesn't live far from me so I walked. Before I set off I put my Ipad 2 in my bag. When I got to my friends, I took it out and the screen only showed black. I didn't know what to do so I attempted a few common things, tapping it, charging it and resetting it using the home and lock button. But nothing worked. I looked for a solution on this sight and I haven't had any luck. There was a suggestion where I was to restore the Ipad, I tried it. Before then, my Ipad ran on IOS 7.1.2 I think. But it required me to update to the current software. I updated the Ipad but as it was about to finish restoring, there was a problem and everything stopped. At this point its really begging to test my patience as I spend around 6-8 hours a day using it for work and emails and without it theres little much I can do. Is there anyone who has had similar issues? I just don't understand how it ended up like this within the space of 20 minutes. Also theres the issue of restoring all the back up data, I cannot recover anything if the screen refuses to respond!
I Have a similar problem. My iPad screen will not respond to touch. If I tough the start button a message appears that says slide to unlock, but will not respond to my touch. If I touch the on/off key a message says slide to power off, but the screen will not respond to my touch. What must I do?
-
Tryed to update my software but me screen has gone black and the apple sign is flashing on and off
Tryed to update my software and at the end my phone went black and the apple sigh is flashing on and off it's been like tht for 2 days now
Follow the instructions here > http://support.apple.com/kb/HT1808
You may need to try several times to get it to work... -
IPhone 5c's screen has gone black and will not come on. When I plug it in it buzzes every 2 seconds.
My iPhone 5c screen has gone completely black, i can't turn it on at all. I can't even reset the phone. However when i plug it into my laptop every couple of seconds it buzzes.
Is there any way i can fix this? Or will i have to go into the Apple store and request for a new phone. I also haven't had the phone for a year yetHi, Raff-Jaff.
Thank you for visiting Apple Support Communities.
I understand that your iPhone 5c screen is blank orwill not power on. Here are the best steps to go through for this issue.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
https://support.apple.com/en-us/HT201412
Cheers,
Jason H. -
Downloaded ios7 and now my screen is black cannot use the phone has any one else had this have to wait a week for an appointment
press and hold the home and power buttons until the Apple icon is displayed, then let go.
-
Is an electrical problem covered under the 1 yr. warranty for the iPhone 4? I heard an electrical "fizzy" noise when I plugged in my charger. Now my phone screen is black/black.
Like any warranty on any product, it covers manufacturer defects.
Make an appointment at the genius bar -
I have two emails with my .mac account...my secondary one (my business) is giving me the message "wrong password"...This happened after my primary email mysteriously came back online after going on vacation for a month. Is there a .mac email problem right now (July 2012)
It may have something to do with mobilme shuttting down on June 30th. See this FAQ.
-
Where would i find out what the password was set to?
Your backup became encrypted. Keep trying various passwords but unless you successfully enter the correct password, you will not be able to restore your phone from that backup
-
My ipad screen has gone black and I don't know what to do the screen still works and I can still unlock it and I can still type. But I don't know what to do can anyone help me it will be much appreciated
If the reset doesn't do it then it's possible that the backlight or another part of your screen has broken. Unfortunately it's not really user servicible. I'd make an appointment at your local apple store and have them check it out. If your device is still under warranty and they don't determine that the damage was the result of 'abuse or neglect' (their words) then it could be a free replacement.
I'd just do a backup before you take it in, just in case.
Maybe you are looking for
-
Xcode Tools will not update under Mac OS X 10.7
After upgrading to Mac OS X 10.7 on a new Mac Mini, I attempted to update my other software thru the App Store. When I attempt to update Xcode I get the following message: "Xcode 4.0.2 requires Mac OS X 10.6 Snow Leopard. Install the Xcode Tools ve
-
Release procedure for Document Park / Post
Dear FI experts, We want to set release procedure for Customer Credit Notes (FB75) For this we did following configuration - FI >> FI Global Setting >> Document >> Document Parking (all setting w.r.t. release approval) Created and parked a document u
-
Whenever I browse the internet for more than a minute or two, my powerbook starts to hum. Its not a spinning up sound, like the hard drive has started working. It is much louder, and sounds like something is working TOO hard. the humming comes from u
-
Content of Ini-File with config-data sometimes deleted?
Hello, i have a simple vi attached where i read config-data from a file. Sometimes it happens that the content is lost. I am not sure why, but perhaps there a errors in the vi. I wonder about the last vi "Close Config Data" there is an onput-paramete
-
ESH_ADM_INDEX_ALL_SC cannot perform initial indexing for all search connectors
Dear SAP Gurus, We are implementing TREX version 7.10.50 for Talent Management ECC 6.0 - EHP 5. I'd like to ask you question regarding ESH_ADM_INDEX_ALL_SC program which used to create search connector for TREX and perform initial indexing for all se