Hello, my i phone froze suddenly and it won t start up. when people call me they hear it ring but the phone is dead, the screen all black and when i press the start up button nothing happens. i tried to connect it to the macbook but nothing happens
hello, my i phone 4 froze suddenly. before it did, the battery was 80% full. i called it from another phone and i can hear a ringing tone but my phone is completely dead. i pressed the operating button and nothing happens. also i tried connecting it to my mac but nothing happens. i also put it on the charger but nothing happens. any tips please?
Try this yet then.
How to reset your SMC >>
Run fsck.
1. Reboot/Startup holding your Command-S key down.
2. At the command line type the following and hit 'Return.'
/sbin/fsck -fy
3. After it has check/repaired your disk, type 'reboot' and hit 'Return' again. Unit should bootup normally.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
An Apple User Group
Similar Messages
-
hello!!! I have my I phone screen all black and I cannot see nothing!! do you know or do you have an idea about what's happened?
Connect your phone to the wall socket and press and hold display off and on button along with home button for over 10 seconds till Apple logo appears.
-
i have a iphone4s and an ipod 4th gen, they both share same itunes acc, the ipod has its own email but when people try to FT it also rings on my phone, how do i stop it ringing both devices
That's because you're using the same Apple ID on both devices. On your phone: Settings>FaceTime>You Can Be Reached at>Remove your Apple ID.
-
I just bought iphone 5s... However, when people call me, they can't hear my voice clearly but I can hear their voice. What happen to my phone?
Do you have a case on the phone? If so, can you try a call without the case on. If not, take a look at this support document to see if anything there helps. http://support.apple.com/kb/TS1631
EDIT: You might also want to take a look at this support document too. http://support.apple.com/kb/ts5183
Message was edited by: ChrisJ4203 -
I have a 5 month old iMac running Lion and W7 with the latest version of boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts, there's a small amount of drive activity and that's it.
Hi Jane, your info may still be there, look in the Users folder at root of the drive, how many users are there there?
It sounds like this may have happened...
Return to default desktop, apparent "loss" of home directory, (it can happen spontaneously too)...
http://docs.info.apple.com/article.html?artnum=107854 -
Does anyone know how to fix these?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
My IPhone does not ring when someone calls me. This started happening a few days ago. It will ring if I get a text message or an alert of some sort but it just won't ring when someone calls me. It vibrates, just doesnt ring...Why is that?
I am having the exact same problem. If the phone is locked, when people call me, it goes to voicemail. My phone never rings and I never get a visual notification until it is too late. Similar problem with texts and emails when locked. No sound and no visual notification. I am a REALTOR. My phone is my lifeline. If it doesn't ring, it's a very expensive paper weight...
-
Screen Goes Black and Hangs when browsing by Artist, Album, Song, etc.
I'm having a fairly huge issue with Front Row:
I can play video files (although their is a moment of hangtime between selecting a video and the video actually playing) and music files (if I choose the "Shuffle Songs" option), however, when I choose to browse my music by artists, albums, songs, genres, etc. my screen goes black and stays that way until I hit CMD+Q over and over until it finally quits. Furthermore, when I do play music via "Shuffle Songs" and quit out of Front Row, the music continues to play in the background and cannot be stopped, paused, etc.
Is there anyone out there who can help me fix this? I love Front Row and use it all the time and it would be a shame not to be able to anymore..
Thanks in advance,
CoreyI have a similar problem. When browsing music the screen goes to black or just freezes on whatever was beeing displayed for maybe 30 seconds to a minute before continuing. It happens quite often. I am running the latest version of Front Row on a brand new Mac Mini. I have a very large iTunes music folder (about 830 gigabytes of uncompressed AIFF files) running on an external FW800 drive. I tried repairing permissions and a number of Front Row and a few iTunes files appear in the list. However, when I run repair permissions again, the same files are still listed so obviously if they need to be repaired, it's not happening. I tried repairing the volume (no problems found) and repairing permissions from the Install disc but the result was identical.
-
Hello. I dropped my ipad, first gen, from my chair to the floor. The screen went black and I can't start it again. I have tried to hold both buttons down at the same time, but nothing happens. Any help?
You will probably have to contact Apple for repair but before you do try this:
Turn your iPad upside down on your lap and give it a hard smack on the back. -
My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.
Pressing the Home button and the sleep/wake or on/off button together until you see the Apple logo and then release is called a reset.
If no change after a reset, the next step is restoring your iPhone. -
This happened to me when I received a call. My phone started vibrating when it received the incoming call but the screen was black and kept vibrating like as if the call was still coming in, even though my friend hung up. It kept going and going, so I tried holding down the lock button to turn it off but screen was still black/turned off. Hitting home did nothing. My friend said to try holding down the lock button and home button together to reset it. I tried this and yet nothing happened. I am waiting for the battery to drain out and give it a try.
To reset, you have to press both the home and sleep/wake buttons until the Apple logo appears - takes 10-15 seconds.
-
sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.
Hey shahbazfromgbr,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
2. Make sure the Ring/Silent switch is not switched to silent.
3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
9. Restart the iPhone.
10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks,
Matt M. -
(Mountain Lion) suddenly the screen turns black, and I have to use the on/off switch to turn it on. And, the screen turns to zoom, and the only way to return to normal is to close the window and start all over again?
Does the screen go black while you are using the machine? ...or after it has sat idle for a bit?
If it happens while you're using the machine, check to see if a hot corner has been set for sleep. You can do that here: System Preferences > Desktop & Screen Saver > Screen Saver and click the button labelled "Hot Corners..." in the lower right.
If it happens after a bit of idle time, that's normal sleep behavior. The delay can be adjusyed here: System Preferences > Energy Saver.
In either case, pressing any key on the keyboard should bring it out of sleep.
Re zooming -
If this happens while in Safari, and you are using an Apple Magic Mouse, a default setting applicable to it is that a soft double-tap on the mouse will zoom the Safari window. A second double-tap will bring it back.
If it is the entire screen that is zooming, Control plus scroll gesture on the mouse will zoom the whole screen. Repeat with the opposite scroll gesture to bring it back. -
Hİ
My ipad's screen is black. When it take charge, I can hear sound but still black. I press and hold both the sleep and home buttons for about 10 to 15 seconds but this doesn't work. Screen still black! PLS HELP ME!How long did you let it charge? It may take 30 minutes before the iPad responds when the battery is completely drained. Let it charge for at least 30 minute using the wall charger. Then rest the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
If the iPad restarts let it continue to charge until the battery is 100%.
If the iPad still does not start make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!
What should I do?Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
Maybe you are looking for
-
Datasource related to FI and Cash Flow
Hi ,can anyone please give me information on FI and Cash Flow management and it's datasource as well. Regards Arjun
-
Hi all, I am using alv to display Currency fields in a tax return report.........I want to display the sum of a perticular column or all the columns when i press the total button from alv selecting the required columns. But its coming only for fir
-
Audit Vault Viewlet links broken
The first 2 viewlets in the Audit Vault section link back to itself instead of launching the viewlets. http://www.oracle.com/technology/deploy/security/database-security/htdocs/all_sec_obes.html
-
Performance effect during HOT backup mode
Dear Experts, Oracle 10gR2, Windows Server 2003 ,I.4TB database size Our backup team put database in hot backup mode (alter tablespace begin......). Is it cause some performance issue in the database ? Thanks & Regards Sunil Kumar
-
Consuming a Portlet developed With Web center
Hi, Please suggest if a portlet developed using web center can be consumed in any kind of web application(irrespective of tehnology..say.. asp.net) Thanks & regards