Hello, my MacMini was in repair and now when it´s starting it finds the bluetooth-mouse but not the bt-keyboard. What can I do?
Hello, my MacMini was in repair and now when it´s starting it finds the bluetooth-mouse but not the bt-keyboard. What can I do?
Reset smc and pram.
Similar Messages
-
I have updated my phone too ios7 but now when i try to add music to my phone it syncs it but then removes it stright away does anoyone know how to resolve this problem ?
I have same problem. basically Apply have made a pigs ear of the ios5 upgrade, rendering iphone docks useless.
The internet is full of complaints about this problem.
And Apple is doing what.....
Exactly, SFA ! -
My phone shut off as I was charging it and now it has a black screen. Does anyone know how to fix this or what I can do?
Basics from the manual are restart, reset, restore.
Have you tried these? -
I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
initialy All I was trying to do was downgrade 10.7 to 10.6 .You have to consider the possibility the hard drive may be dying. If your data isn't backed up, try one of the tools below:
https://discussions.apple.com/docs/DOC-1689
Once you are sure your data is backed up, we can examine other possibilities. In the meantime call AppleCare for your original installation DVDs. You may need them. -
My Windows XP software recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes."
I have not used iTunes for several weeks so the issue may not be related to the last Windows XP automatic upgrade. I have never had problems with iTunes in the past. Is this a real message or perhaps a virus?
Before I reinstall iTunes, any thoughts?It's a real message.
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now? -
Recently Apple replaced the hard drive on Mac running Yosmite 10.10.2 and now when i try to rn FaceTime, the computer says "no camera available". Does anyone no how to fix this?
Assuming there is no hardware problem try reinstalling Yosemite. If this does not work then take it back to the Apple Store.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I updated to 7.1 and now when I plug my phone into the computer, it says there are no pictures??????
I updated to 7.1 and now when I plug my phone into the computer, it says there are no pictures?????? When I have 500 pictures on it!!!!! Im soooooo mad I did the update! Worst decision ever!!!!!!!!!! I am SOOOO ready to leave the IPHONE alone- maybe throw it in the river or lay it on the train tracks. Its been NOTHING BUT TROUBLE since the update!
Just to be clear: Tap on the Photos app to start the app. Then tap on Albums at the bottom of the screen. You might have several albums but only one is named "Camera Roll." Are there photos in that album?
If there are NO photos in the Camera Roll album there are no pictures to import. The remaining albums might have come from a sync with your computer or they might be your PhotoStream.
If there ARE photos in the Camera Roll album, connect your iPhone to your computer and start your camera application on the computer. Your phone should be recognized as a camera. -
I started with one itunes account for my iphone and ipad, and now have a second ipad linked to the same itunes. Can I set up a new itunes account for one ipad without losing what has already been downloaded on it? I want to stop my husbands downloads appearing on my ipad, and vice versa.
A much simpler solution would be to go into Settings > Store and turn off Automatic Downloads
-
I just updated iTunes on my dell and now when I try to go to the store I get an error message that iTunes has stopped working and the program closes. Ideas?
I have also retarted twice...
-
I have restored the settings on my iphone and now after entering the pin on my sim card it wants me to connect it to iTunes but when i try it just says my sim card is not supported... what can i do now? It worked fine before...
natalieduffy wrote:
it says 'your iphone could not be activated because the activation server cannot be reached'
Typically this indicates a device that has been hacked to be unlocked or jailbroken.
If that is the case, no support can be provided here. -
hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphone??or it's just an temporary error in the apple software center???
Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card. -
I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?
I think that we all understood what you meant. If the extension cord is no longer working, then return it.
We are all trying to tell you that you can plug the power block into a standard household extension cord - using the short cord that came with the iPad - and there is no need for the extension cord that you bought.
Edit - one upped by the lovely lady with the pretty kitty avatar -
I uninstalled itunes on my laptop and now when i reinstall i cant find it
i unistalled itunes on my laptop and now when i reinstall i cant find it
Pick the appropriate one of these for advice:
Windows - http://support.apple.com/kb/ts1538
Mac - http://support.apple.com/kb/ts1591 -
second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Install Maverick and now When I turn off my mac air, takes 2 minutes. Why? As I can solve?
Install Maverick and now When I turn off my mac air, takes 2 minutes. Why? As I can solve?
Hi Linda,
Unplugging it from AC power will drain the PRAM Battery in short order, thereby losing setting, like Monitor resolution.
You can test the Pram Battery by disconnecting from the Internet so Date/Time doesn't update before you see it, shutdown, unplug AC for a bit, startup & check Time.
In Sys Pefs>Displays, can you set the resolution?
Maybe you are looking for
-
Dear Friends, Can we clear the vendor down payment automatically? I mean through APP can we do this? Please give me your inputs Thanks in advnace NMB
-
What does .ECS file do in a B2B configuration?
What is .ecs file for? 1)Validation of incoming data? or 2)Creation of required wiremessage? (EDI, positional flat file etc) or 3)Both 4)Something else Thanks in Advance Don Pauly
-
Linksys E2000 enable guest account password
I'm trying to set a password for my guest account in Cisco Connect. But after I click complete (voltooien on the screenshot) it stays an open network. My main WLAN is protected with WPA2. How can I enable the password for the guest account?
-
ECC 6.0 saving dynamic program variant
Hi, I have a sap std program, on the selection screen i have an account field. now when i select a variant for this program i want the variant to pick up the value dynamically from a FM or a table.. Is this possible.. if yes then how.. Thanks for the
-
I know that most photos have some part with Out of Gamut colors not reproduceable by CMYK offset. And Photoshop says those colors will be clipped when converted from RGB to CMYK. I want to know what exactly Clipping means. What happens if I convert (