Hello,  since the last update 10.6.8, my MacBookPro mid 2010 randomly loses the connection with my wifi AppleTV2

Hello,
Since the last update 10.6.8, my MacBookPro mid 2010 randomly loses the connection with my wifi AppleTV2 2. It works well with the connection between myPC and filiaire AppleTV2 els and between my iPhone 2 (3G and 4) and AppleTV2 butpoorly between the MacBookPro and AppleTV2.
Then I must quit and restart iTunes every time to continue to read my films. I repairedmy permissions, I restore my 2 AppleTV2 but that do nothing. I concluded that it is a loss of wireless connection. I do not know exactly what to do ...
If anyone can help

Thanks you rbrian, it seems that your solution is good because after some tests it works very well

Similar Messages

  • Since my last update on OSX10.9.2 My mac hardly starts up. and whats with that rainbow wheel spinning all the time

    It's not booting uplike it should. Its very slow. Rainbow wheel spinning all the time. Augh!

    Make sure you have a backup.  You should always have a backup and especially when your Mac is ailing.
    Time Machine Basics:  http://support.apple.com/kb/ht1427
    Most commonly used backup methods:  https://discussions.apple.com/docs/DOC-3045
    Try and SMC Reset.
    http://support.apple.com/kb/HT3964
    Look in the Applications/Utilities folder and run Disk Utility.  Click on the upper left disk icon.  Does the S.M.A.R.T. status say “Verified”?  If not the disk/SSD is unhealthy and needs to be replaced.  Click on the icon indented below, usually called “Macintosh HD” and Verify Disk.  If it finishes with a green “OK” message then all is well with the disk.  If it shows errors in red then you have found a problem to address once the system is backed up.
    Try booting in Safe Mode (Boot and hold down the Shift key.)  It should take longer to boot and shutdown. Once it is booted is it more responsive?
    Please download and run Etrecheck and post back the results.
    http://www.etresoft.com/etrecheck

  • TS3147 Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers!  Everything is connected but I get an "idle" message in the queue.  I have "Reset printer system" and re-added these printers. No luck. H

    Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers!  Everything is connected but I get an "idle" message in the queue.  I have "Reset printer system" and re-added these printers. No luck. Help?

    Hello,
    It isn't the fw in Network you want o use or look at, that's for something completely different.
    My first suspect is the Power Adapter on the LaCie has gone.
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
    Reset the Firewire bus
    If your Firewire or USB isn't recognizing any device.  A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
    1. Shut the machine down.
    2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
    3. leave it for 10 minutes.
    4. Connect back up and reboot.
    http://www.macmaps.com/firewirebug2.html

  • HT201070 Since my last update RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

    Since my last update  to 10.8.4 RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

    update 10.8.5 solved this problem. Thankyou anyway.

  • Ever since my last update I have been unable to add songs from my i tunes library onto my i phone.  The "add to" button does not appear for me when I connect my i phone.  Can anyone shed some light on this for me?

    Ever since my last update I have been unable to add songs from my i tunes library onto my i phone.  The "add to" button does not appear for me when I connect my i phone.  Can anyone shed some light on this for me?

    Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to  one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
    Thanks again, Sandra2474.

  • Since my last update of Photoshop CC 2014 the performance is down.

    Since my last update i can't use CC 2014 no more. The Performance is to slow. For example: If i use the select tool, the select process takes a long time.
    I use win7. My grafic processor is the  NVS 5200M/PCIe/SSE2
    Thanks for your help!

    Hi Haneadino,
    Please open the panel "Color Themes" from menu Window >> Color Themes
    The Kuler has been renamed to Color Themes
    With Best Regards,
    Raghuveer

  • HT1338 Since my last update to Itunes the application refuses to close

    Since my last update to Itunes the application refuses to close and slowly locks my laptop until I reboot.  When I reboot it reloads all of my email deleted all day and sometimes the day prior.  I have run disk utilities repair disk permissions.  This works for a short and the whole thing starts all over again.  Does any on have any hints?

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Hello, since the update, and for three days no longer have access to the apple tv to my tv series bought why? I can play them on ipad but not have access to these series on apple tv

    Hello, since the update, and for three days no longer have access to the apple tv to my tv series bought why? I can play them on ipad but not have access to these series on apple tv
    Thanks

    What model of Mac? Mirroring will require a model from 2011 or later, running OS X 10.8 or later
    About AirPlay Mirroring in OS X

  • TS1881 Since my last update with itunes I can no longer sync my pictures on my phone to my computer  Can someone help?

    Since my last update with itunes June 17,  I can no longer sync my pictures on my phone to my computer  Can someone help?

    Do other irems sync to the iPod?
    If a PC try:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Does the iPod in in My Computer?
    If yes canyo see the photoe in the DCIM folder in My Computer>iPod>DCIM?
    Other uses have reported the same problem

  • Trouble to connect to wireless G routers after installed the latest update 10.10.2  . Anyone with the same problem? Please help Apple support team!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B...)

    Trouble to connect to wireless G routers after installed the latest update 10.10.2  . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)

    Trouble to connect to wireless G routers after installed the latest update 10.10.2  . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)

  • Run report cause "The page cannot be displayed"  OR The connection with the

    Hello,
    1. Database oracle 10g R2 on windows 2003 server enterprise edition with SP2
    2. Application Server Oracle 10g R2 on Windows 2003 Server with SP2.
    Problem explanation
    one of our branch which is connected via leased line is unable to run some of the reports if the report have a little more
    data,
    one report i tried its size is almost 900k ( they are using the same line since last three month and they are
    able to run all reports before, bandwidth is 128k), if you run report browser search a little while
    for output then displayed "The page cannot be displayed" if you look at the report log it's finished successfully.
    I try to download the report rather opening in browser it reach to end of in downloading window at the end it display
    this message
    Internet explorer can not download getjobidxxx.xls from oracleaps.domain.com
    The connection with the server was reset.
    I want to mention one more thing there is a ISA server and firewall in between client and Server but its the same condition
    for
    head office client but they are able to run all report with out any error.
    any one have idea??
    Thanks and Regards,
    Khawar

    Hello,
    Thanks for reply, I have posted Service Request to Oracle Metalink and finally resolve the issue, they suggested me the following solution( a note has also been posted in Knowledge Base no. 871016.1 )
    Webcache KeepAlive timeout is reached. (The default value for KeepAlive timeout is 5 seconds)
    Increase the Keepalive time in webcache to a higher value
    **************EOF******************
    Thanks and Regards,
    Khawar

  • How to update a MacBook Pro 17 inch mid 2010 with SSD?

    I know that this question probably been asked many times before, but i can't really find the answers to my specific questions.
    I want to update my MacBook Pro 17 inch mid 2010 / 2,66-GHz Intel Core i7-processor, 8 GB memory, running latest Mavericks version (full specs: http://support.apple.com/kb/SP581?viewlocale=nl_NL) with a SSD (i think a 500GB) to speed up my MacBook Pro.
    I have about 400GB of data, personal and work related (mostly design work) that is really important to me of course. I use 3 harddrives (one offsite) at the moment to backup everything using Time Machine which works great, because i always can fall back on it when i delete something accidentally.
    The physical installation looks quite simple to do, but i have some questions about the entire procedure i hope someone can help me with:
    Which SSD will fit in my Macbook Pro the best (specs)? What to look for?
    And what about TRIM support to make SSD last longer, i heared that Apple default drives that come with the Mac will support TRIM, but what about any other SSDs on the market do support it and if so which ones?
    There are different ways to do install SSD, but what is best procedure?
    Clone HDD to SSD with Carbon Copy Cloner or restore from Time Machine?
    Clean install with Bootable USB flash drive with Mavericks and restore from Time Machine?
    Buy a USB enclosure for SSD and Clone HDD to SSD with Carbon Copy Cloner first and boot it to check and than install the drive?
    Could anybody help me with this?
    Thank you.
    Krijn

    Look here for the maximum memory for each MBP model:
    http://www.everymac.com/systems/by_capability/actual-maximum-ram-capacity-of-mac s.html
    The limit is given by the memory controller ("northbridge").
    There are no thermal drawbacks expanding the memory to the maximum supported limit...
    However, as explained, often Apple did specify an "official" maximum RAM amount which is in reality shorter than the real value, simply because, when the machine was launched, memory sticks of the proper size for giving maximum capacity were not available.
    Apple never revises the specs after the launch...
    But this did not happen in your case: the maximum memory for mid-2010 Core machines appears to be effectively just 8 Gb, form the page linked above...
    Final remark: in my experience, the SSD counts much more than memory for speeding up a laptop! As you already have 8 Gb, there is little value to expand to 16Gb even if it was posisble. Better to invest the same money in a  larger SSD...
    I expanded mine because it was equipped with just 4 Gb, and purchasing 16Gb Corsair was costing as 8 Gb Crucial. However, it was not a wise choice, those cheap Corsair memories were bad, the seller had to exchange both sticks...
    If I could come back, it was better to spend more and buy Crucial memory sticks!

  • Problems after efi 2.5 update on macbook pro 13 inch(mid 2010)

    i don't know if it's related but after i updated my macbook pro 13 inch mid 2010 efi firmware to 2.5 i'm having usb problems.
    the problem started after i went to software updates and downloaded efi firmware 2.5, but i didn't restarted right away actually i downloaded the efi firmware around 3pm and shut down my computer around 1am, and in the morning when i turned on my mac it made a strange noise and then restarted. then when it restarted my usb external hd wasn't working well, it takes around 10 minutes for me to be able to watch a video directly from it, and my 3g usb connects but the speed is really slow, so i cant use it. i don't know if efi firmware update is related to usb, but somehow it made my usb ports stoped working properly.
    so is there a fix for this?

    What you should do is time consuming but really helps (it helped for me)
    Go to your disk utility setup and select your harddisk drive, then click on verify disk permissions and after that repair disk permissions, don't ask me why it runs in this order but it seems to elliminate the cause. you will most probably see some repairs being listed.
    the next step is to "repair disk" procedure, allthough it could be possible that it can not and then it will tell you to use your setup disk that came with the computer, insert disk hold command and "R" at same time and you come into the menu to repair or re istal software etc.
    I ran the repair mode, then re installed my operating software and it seem to resolve this issue but also the long start up problems.
    good luck

  • Listener refused the connection with the following error: ORA-12500

    Hi,
    We had had some difficulties with our portal lately. All of a sudden portlets failed and started givin error messages all over our webpages.
    I tried to login to EM Console to try and restart Portal OC4J and got this error
    An error was encountered while loading page. An error occurred when attempting to connect to the Database.
    Resolution:
    Make sure that the database and listener are up.
    If the database is up, make sure that the OracleAS Repository API files ias.properties and iasschema.xml are correctly configured.
    If necessary, use the EM Console to reconfigure the host, user name and password associated with the database
    Base Exception:
    java.sql.SQLException
    Listener refused the connection with the following error:
    ORA-12500, TNS:listener failed to start a dedicated server process
    The Connection descriptor used by the client was:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=PORTAL.MSS.EDUS.SI)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ASDB.MSS.EDUS.SI)))
    . Listener refused the connection with the following error:
    ORA-12500, TNS:listener failed to start a dedicated server process
    The Connection descriptor used by the client was:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=PORTAL.MSS.EDUS.SI)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ASDB.MSS.EDUS.SI)))
    In ..INF/network/sqlnet.log
    Fatal NI connect error 12500, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=portal.mss.edus.si)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=asdb.mss.edus.si)(CID=(PROGRAM=I:\Oracle\INF\Apache\Apache\Apache.exe)(HOST=CLUSTER1)(USER=SYSTEM))))
    VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.1.0.4.0 - Production
         Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.1.0.4.0 - Production
    Time: 11-JUN-2007 13:00:24
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12564
    TNS-12564: TNS:connection refused
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
    After restart everything works as normal. Any ideas what went wrong, or where to look for some additional answers?

    Ora12500 means your OS has run out of resources, so you cannot start a process on the Server Side. Post the complete error stack, the last lines show further information to troubleshoot this error.

  • Listener refused the connection with the following error: ORA-12500, TNS:li

    I got this error when I use EM, or sqlplus:
    Listener refused the connection with the following error: ORA-12500, TNS:listener failed to start a dedicated server process
    when I do
    $lsnrctl status:
    here is the result
    Service "abc.def.com" has 3 instance(s).
    Instance "dbtest", status UNKNOWN, has 1 handler(s) for this service...
    Instance "dbtest", status BLOCKED, has 1 handler(s) for this service...
    Instance "dbtest", status READY, has 1 handler(s) for this service...
    please help. Thanks.

    Ora12500 means your OS has run out of resources, so you cannot start a process on the Server Side. Post the complete error stack, the last lines show further information to troubleshoot this error.

Maybe you are looking for