Hello sir i purchased second hand iphone4s with ios 7 beta version after 2 month on 6 oct my iphone ask for a uers id that is unknown by me my new id and password also not work when i contavt with previous owner and use his id and password which he use on

plz help me by mail me on [email protected]

the previos owner id and password also not work there what i do all do everything downdrade , upgrade but everytime ask for previous id and password...........i also erase find my phone from previous user id

Similar Messages

HT201365 hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me

hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on [email protected]

First, we're not Apple here (Apple does not participate in this forum). We're only users like you.
The previous owner has not given you the correct ID and password for you to use.
If the iphone has iOS version 7, then read through the following...
http://support.apple.com/kb/HT5818

Hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade

hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on
iPhone 4S

oenkz33 wrote:
this does not help at all for the second owner, after making the first owner id with careless, sorry for my english ...
Careless? Possible, but unlikely. Most likely the phone was stolen from the first owner. It would be a VERY careless iPhone owner who did not erase their personal information from a phone before selling it, and to do that it is necessary to disable Activation Lock. In most places in the world knowingly using stolen property is a crime, so the fact that the phone doesn't work may be the least of one's risks.

HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps. It also has stop work when trying to down load new Apps. Any suggestions out their???

For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps. Everything else seems to work. Any suggestions out their???

I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working. My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads. I have checked into my ITunes account and the ID and password are correct and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work. My problem seems to be just with trying to use my ID and password when wanting to download new books or apps. I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel. This message appears usually ten minutes after I have tried to make a purchase. At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen. Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!

Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

My login password is not working when i try to log in to my macbook air. what should I do?

my login password is not working when i try to log in to my macbook air. what should I do?
Thanks, Debora

You can reset the password.
How you do it though depends on the version of OS X you are running.
On Lion or Mountain Lion, you use the following technique to reset the Administrators password:
Boot to your Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu.
If you are using the Keychain, you will lose your existing one, and have to start a new one, unless you remember the old password.

HT4528 My Apple ID or password is not recognized when I tried to download an app. I reset my password but it still did not work. My id and password worked fine on this website.

My Apple id and password is not recognized when I tried to download an app. I reset my password but it still did not recognize it. This website recognized it.

Did you go to Settings>iTunes and App Stores and sign out and sign back in?

Hi! i went to go slide the thing to unlock my iphone 4 and it wouldnt slide, it froze up and everything is not working. i tried plugging it in but it is still frozen and nothing will work. how do i fix this?

hi! i went to go slide the thing to unlock my iphone 4 and it wouldnt slide, it froze up and everything is not working. i tried plugging it in but it is still frozen and nothing will work. how do i fix this?

My recommendation is to restart the iPhone. All you do is hold down the top button and hold down the home button for 5 seconds untill it automatically shuts down. Then click the top button untill you see a grey apple on your screen.

Partner function not working when creating PO with ref to PReq

Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
however it works when i create the PO directly ( without the PR ref )
I am using the same material & Plant for both manual PO & PR to PO.
Any idea what could be wrong .
I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
Thanks
Dkmurthy

Hi,
I have also an issue that seems similar to one you are discussing.
When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N
Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
Any input is wellcome.

MAC Mouse and Keyboard Do Not Work, when I am trying to re-install the OS using "Command R" option

I am trying to re-install MAC OS 10.8.2, but when I hold "command R" I am asked for the firmware password, but the keyboard and mouse do not work.
If I only select "option" during the boot up process it will ask me for the firmware password, keyboard and mouse work, but I can only select the HD option.
Can someone advise what is the problem here, and your resolution.
I have tried different commands "option + command + R' with no luck.

I tried what was provided on the link, but it is not working.
I hold it down, before the gray screen and the chime, but it only prompts but the firmware password.
I tried based on the specific order in the support document and at a random press and hold.
No go any other thoughts?

HT201268 i tried for 4 day now to remove a podcast and it has not work yet. i've even did a (Click Report a Concern) and sent an email and still no answer

i tried for 4 day now to remove a podcast and it has not work yet.

I have tried clicked "remove podcast" on each of the DMLive podcast pages, explaining to them who I was and what my job title was here, but all I got in return was an e-mail that said "have the administrator contact us." As I explained above, there is no admin on this account anymore and whoever was the admin has long since moved on.
Jeremy,
For understandable reasons, just because there is "no admin on this account anymore" does not mean they will take instructions from someone else.
Make clear to Customer Service that you are now the officially responsible party on that account now.

SCVMM 2012, Conntect via conosle does not work when logged in with specified credentials

Hi all
I have a problem with the SCVMM 2012 console. When I start the console I select the "Specify credentials" option and then I enter my admin credentials. Afterward the console opens
and everything works except the "Connect via Console" function.
When I try to connect to a VM I get the following message:
Virtual Machine Manager lost the connection to the virtual machine for one of the following reasons: Another connection was established to the console of this machine. The virtual machine has been shut down or put into the saved state. The user credentials
provided do not have the necessary privilege to connect (0x0003, 0x0300)
It seems that the Virtual Machine Viewer runs not under the admin credentials which I enter at the beginning and therefore the console cannot connect.
Has someone the same issue ? Is it by design that the console connection does not work with specified credentials or is a sort of a bug or error ?
Thx
J0fe

Being new to SCVMM, I've just come across this issue myself, though I came to a different (not necessarily better, but good enough for me) resolution.
I have a somewhat convoluted but not abnormal configuration where the SCVMM server lives in a separate untrusted forest to that which the Hyper-V Server hosts live.
As people have noted in this and other threads, the VirtualMachineViewer.exe process launches in the same security context with which you logged onto your pc. While the VmmAdminUI.exe process also runs in the same security context,
the network logon it issues makes use of the credentials provided at the SCVMM MMC's logon screen, which VirtualMachineViewer.exe does not.
I elected to use Credential Manager to resolve this issue.
In Credential Manager, I created a "Windows Credential" entry where the hostname matched the FQDN of the hostname that appears within SCVMM as the virtual host entry. Using an IP does not match if you've used an FQDN in the SCVMM
registration, and vice versa. If you used an IP for the host in SCVMM, then you need to supply that IP as the hostname in Credential Manager, and likewise if you used a FQDN.
This solution isn't perfect as it requires you to manage numerous Credential Manager entries (one per host), but that still appealed to me far more than one per guest. If I had a larger environment, I'd script the account configuration
given it only needs to happen once per host, rather than on an ongoing basis of once per guest as some of the above approaches would require.
I haven't tested the different combinations to verify the least permissions required. For the time being I've gone with the model of using a non-privileged domain user account (to avoid managing multiple identities and passwords)
which I added to the local Administrators group of each Hyper-V Server host. This stuck me as being a sound enough compromise between rigid security and ease-of-administration (given the per host arrangement in Credential Manager).
With the account correctly specified in Credential Manager, I'm able to move on past the 0x0003 error and successfully use the remote function.
If I was to point out an upside to this, it would be that this approach would allow me to remote Hyper-V servers in untrusted forests (including workgroups), which is something I couldn't do if the VirtualMachineViewer.exe process
did in fact use my SCVMM credentials alone. Ultimately, that's something you have to come to terms with yourself, though.
Cheers,
Lain
Thanks a bunch Lain, this helped! I'd still consider this a bug, however, and not a workable solution for a large number of servers/admins... But for now this does the trick, thanks!

Right, MacBook Pro 17" early 2011(Built March) and my new OCZ sata III 6G not working, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III.

My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work.
Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.

After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

.jar not working when building project with netbeans plugin and log4j

hey..
subject tells everything..if i build my project referencing log4j, i get a .jar file with 280 kb which is executable
if i add log4j and do some logging, code still works in netbeans, but buildung produces a .jar with 80 kb and an
attached lib-folder with the log4j.jar in it..if i uncheck copy requested libraries, i just get the 80 kb .jar file which
is not working
any hints?

Are you building the jar file using the fxdeploy ant task to build the Jar? That is required to have an executable jar file.
Also there was a change to the netbeans project structure, which may be a contributing factor.
Things to try: Upgrade to the latest netbeans 7.1 beta build, set up a new Java platform in nb that includes JavaFX, create a new JavaFX project and build it. This should produce an executable jar.

HT2204 Itunes password will not work when I purchase items after reseting passwords

Have used Itunes for years with no incident. Now, every time I try to purchase a song, book, app...it prompts me for my username and password. Despite knowing it....it will not work. I've logged out / logged back in several times no luck. I've updated my password successfully. But again, each time I try to purchase something, I type in my username / password and it says that it is not correct. ***. Have recently even updated Itunes to make sure everything there is up to date. Is there some virus that could be involved here. HELP!!

iOS: Troubleshooting Messages
FaceTime, Game Center, Messages: Troubleshooting sign in issues
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Hello sir i purchased second hand iphone4s with ios 7 beta version after 2 month on 6 oct my iphone ask for a uers id that is unknown by me my new id and password also not work when i contavt with previous owner and use his id and password which he use on

Similar Messages

Maybe you are looking for