Hello there iv got an mac book pro and running mac os x 10.5.8
hello there iv got an mac book pro and running mac os x 10.5.8 and want to upgrade what can i upgrade to snow leapard
All MBPs 2011 and earlier can have Snow Leopard installed (Late 2011 requires a bit of shoehorning).
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao.
Similar Messages
-
Hello, i currently acquired a Mac Book Pro and running Mac Os X 10.8.3, but i have failed to get the driver for my canon inkjet printer. could anyone help me out please? Thank you
You may be able to download it fom here:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US -
I have a Mac Book Pro and run Ver 10.5.8. I bought iLife today and it won't run on less than 10.6.3. How do I upgrade?
If you do, it will be shipped to you on DVD unless someone from Apple tells you otherwise.
(58671) -
I connected my iPhone 5 to my mac-book pro and the mac-book wont turn on?
I think the cable may be fake? When i connect the macbook to the charger the light on the charger flashes. The mac-book will not boot or turn on.
Use some self reliance and do a search!!!
http://lmgtfy.com/?q=iphone+won%27t+turn+on -
My mac book pro is running Mac OS X Lion 10.7.5 is there a newer version
There are apps in the app store that require a more up to date OS. I've checked though the software update tab and it tells me my OS is up to date. Should I manually install an up to date OS? If yes then how?
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
hi, well i just got my mac book pro, and it worked perfectly yesterday but then when i opened it today to go on FaceTime, my picture/video was dark and red ! how do i get it back to normal? there is a green light next to the camera when im on photobooth/facetime,...
Just do a restart. It seems to clear it up.
-
Hello, I have a new Mac Book Pro and I am unable to get Adobe flash player to work. When I install it it says it has been installed. But where do I see the application that it is there?
Check your system preferences.
My copy of flash installed as a preferance pane.
If its there you will be able to check the current installed version and set preferences for flash and updating. -
Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?
Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
Clinton -
I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that I have to upgrade using the account that I used to buy iPhoto. What do I have to do to upgrade iPhoto?
Dear Katty,
Thank you very much for your answer! I have 2 Apple ID, and I have tried both of them and the problem continues. I founf several peolpe with the same problem in apple communities foruns and that really seems that there is some problem. I addded the links for 2 of those discussions.
https://discussions.apple.com/thread/3374419?start=0&tstart=0
https://discussions.apple.com/message/16628399#16628399
Do you have an idea of how can I solve this problem?
Thank you very much again.
Best regards,
Alfonso -
I have os x 10.6.8. When I try to update it says there are no updates for my system. I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?
Welcome to the Apple Community.
You can purchase Lion from the Mac App Store. You will need to meet the requirements for Lion, but the Mac App Store will tell you whether your Mac is capable of running Lion or not. -
hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?
On your friend's computer with an internet connection, log into the Mac App Store with your ID and download Yosemite from the Purchases section of the Mac App Store. The make a bootable USB install media using
http://liondiskmaker.com/
Then boot from that on your computer and install
You need an internet connection to install via Recovery mode -
I ahve a late 2008 Mac Book Pro and would like to upgrade the memory to 8g. I can only find 2 options Crucial and Ramjet. There is a $40 difference in the cost. Does anyone know if one is better than the other?
I have gotten my RAM from either Crucial or Macsales. They are both excellent.
-
i just got my mac book pro and i was wondering if i could get ichat instead of messages and if so, how can i get it?
Welcome to the Apple Support Communities
Messages can't be uninstalled to use iChat. Messages is the same as iChat but with iMessage support. See > http://support.apple.com/kb/HT5395 -
i switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Hi All, I recently bought a Mac Book Pro and transferred all my photos from my hard drive onto the Mac. I realised that there were some folders which didn't have the camera information embedded in the files and these files refuse to open on iPhoto. I know that the folders that have the problem were not transferred to the hard drive via a photo transfer application (I have a Canon camera) but I simply copied them out of the photo card and onto my old PC.
Is there some way I can open these pictures on my Mac? They work fine on a PC.Thanks for your reply.
The files don't open in preview either. In preview I get the error message 'The file "xxxx_xxx.jpg" could not be opened. It may be damaged or use a file format that Preview doesn't recognize'. The folders with these un-openable pictures do not even get imported into iPhoto. When I try to import them I get an error message about the files being unreadable.
The color profile information on the un-openable files is not visible but I see that all the other files from my old drive are RGB.
Maybe you are looking for
-
How to Create EXTRACTOR from R3 QUERY
Hi, I'd like to create an extractor from a custom ABAP R3 Query that must be executed with a variant. The standard extractor from a query doesn't allow to execute the query with a variant. The query variant drives some calculations and it's important
-
Dear All, I am trying to pull a table ZSNPLAN to BW from R/3 by generic extraction. The table contains data on Planned factory delivery report uploaded to r/3 weekly through a program. the fields in the table are : Client Year Month Week
-
Just downloaded skype. Instructions -which are impossible to find- say to click on People icon on the left and then to click on the + on the right to add contacts. Clicking on Peopke does nothing. How do you add contacts???
-
Can I get help on signing on to Adobe from within Premiere Elements 10?
I am trying to create a photoshop.com account. I have an Adobe ID and everytime I log in with my Premiere Elements 10 it says it has found my Adobe ID and I am a few steps away from enjoying your free benefits. I then enter my Date Of Birth....then
-
Desk top and all graphics in negative
After a small inquisitive child (perhaps a future Apple user) fiddled with the key board, the desk top turned negative. I can't find the appropriate system preference to revert to normal graphics. Example: my firefox background is black etc.