Hello to everyone, I have a problem with my iPhone 5, the dynimic doesn't work... i didn't drop it and didn't contact with water... so should I do? please help me =( P.S. may be I wrote with some mistakes, so I apologyze for it

hello to everyone, I have a problem with my iPhone 5, the dynimic doesn't work... I didn't drop it and didn't contact with water...
so what should I do? please help me =(
P.S. may be I wrote with some mistakes, so I apologyze for it

Hello darkhanfromaktobe,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Have a nice day,
Mario

Similar Messages

TS3992 i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

I have just created this account to tell you that nothing would change if you restored your phone.
The first NO SIM nuisance happened just a week ago. Nothing had been done to the phone before that. I pressed HOME + POWER buttons to restart the phone and SIM card was successfully recognized as if nothing had happened. Then I had a lucky week, not reminded of this issue at all.
Today, however, the same problem keeps annoying me. I've used the same method to heal the phone but all I have done seems more like a placebo. So I tried the ultimate solution, restroing it in iTunes.
Ridicuously, the moment I finished basic setup on the newly restored phone, the same NO SIM CARD INSTALLED message poped up.
So IMO, it's not what you should do to erase and restore your phone.
Plus, I called my native carrier and they said no such problems have been submitted. And since my nano SIM card is quite new (three months old), I'm not going to replace it.
I googled this problem and found something on a Hong Kong webpage. The author of that thread points out that there is a flaw in the SIM card tray that prevents the phone from successfully recognizing SIM cards.
And I really hope Apple could probe into this issue and give official solutions other than restarting / restoring the phone like an idiot.

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

Hello to everyone : I have a problem every time I try to open iTunes for windows 8 64bit... Program stops to work every time trying to access to the store... Is anyone able to help me to solve this issue? Thank you so much...

Hello to everyone : I have a problem every time I try to open iTunes for windows 8 64bit... Program stops to work every time trying to access to the store... Is anyone able to help me to solve this issue? Thank you so much...
N.B. iTunes version is the last one available from https://apple.com/it

Hey sweetcake74,
Thanks for the question. I understand you are experiencing performance issues with iTunes for Windows. The following articles may help to resolve your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M.

I have a earphone with mic but it doesn't work on my iPod 4G. Could there be a possible way to fix it. Please help :)

I have a earphone with mic but it doesn't work on my iPod 4G. Could there be a possible way to fix it. Please help.
-Reyner

Hi chrissyfromrenton,
you just have to close completely you Ipod (push 5-10 seconds on the button to open/close you ipod and slide the turn off) after open the ipod and it suppose to be correct I hope I answer to your question!
Annie

I'm having problems with facebook notifications. The sound doesn't work but shows up in banner. Any suggestions? I've tried everything but restoring. Is it a phone problem or an app problem?

I am having a problem with facebook notifications. The sound doesn't work but appears as a banner. I've tried everything but restoring the phone. Is this a phone problem or an app problem? Has anybody experienced this problem and were they able to correct it?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

Make sure the silent switch is not set to mute. If you can see the red dot, it is on mute.
It may think you have headphones plugged in, try plugging and unplugging a wired headset a few time.
The next step would be to restore as new.
If none of that works, a warranty exchange would be the resolution.

My iphone 5c the sound doesn't work only with earphone.

my iphone 5c the sound doesn't work it works only with earphone.

Hi there lavodette,
You may find the troubleshooting steps in the article below helpful.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
-Griff W.

Hello to everyone I have a problem I can't buy gems in clash of clans applications

Hey I have a problem I can't buy any gems in clash of clans application

What happens when you try?

I can not log on to my itunes account on my second generation ipod but I have no problem with the log on with my ipad. The password doesn't work on the ipod touch. Thoughts???

Trouble connecting to itunes store with my password on my ipod touch (2nd generation) but using the same apple id and password on my ipad2 I don't have a problem connecting to the store.
Need troubleshooting

I have the same thing, same issues. Just came from Colorado using my iPad extensively with no problems.
Get back home, there is an update on my home computer for Airport Extreme to 7.5.2 which I updated. Also updates for iPad for 4.3.4 and now last night 4.3.5.
Still does not work. I have not taken the iPad to another network locally, but my understanding is that it is not a problem with the iPad but with Airport Extreme's update. I have done all the resets, restarts, and turning on and off Wifi on the iPad and that does not work.
I would have to assume Apple is working on it. Very frustrating since I am on my Mac Pro, iPhone 4, and other things and no problem.

HT2729 i have been trying to copy videos from my pc to ipad but it is not working .. i have tried the "drag and drop method and even add files to library but to no avail please help

please help me regarding moving videos from pc to ipad .. i have ipad 2 wih ios5 and windows xp.. ihave tried add files to library and drag and drop method but they are not working.. what should i do

Are you trying to add videos to itunes or to your ipad from itunes.
Your question is very confusing.

Have been up for 2 days trying to have two versions of Firefox on the same machine because Princeton Review only supports 2.0 and my laptop upgraded me to 4.o can you please help?

When I try to access the interactive sites on Princeton Review I politely receive this message:
Your browser: Firefox 4.0 WinNT | JavaScript supported: Yes | screen size: 1366 X 768 | Flash Version Installed: 10.0 r42 | Supports AJAX:Yes | Click here to test connection speed
Attention:
'''This browser is not supported. '''Links to Start, Resume or Start Over any exams in iTest are disabled for this browser.
'''''We encourage you to use''''' Microsoft Internet Explorer 6.0 or higher or '''''Mozilla Firefox 1.5 or 2. '''''
''Use of your Online Student Center in Firefox 3.0 is not yet supported.''

IMO, you are better off installing - [http://sourceforge.net/projects/portableapps/files/Mozilla%20Firefox%2C%20P.E.%20Legacy/Mozilla%20Firefox%2C%20Portable%20Edition%202.0.0.20%20Repack/FirefoxPortableLegacy20_2.0.0.20_English.paf.exe/download Firefox Portable 2.0.0.20] - to your hard drive for the few web sites that are so out of date that they don't support newer versions of Firefox. That way you don't need to fool around with a separate Profile for 2.0.0.20, and there is less chance of a another version / Profile of Firefox getting "contaminated" by that old version or you losing private data if your get the Profiles switched.

Sound on my ipad only works when I enter my pass code and when I play games. But when I typed, however, or try to listen to music/YouTube/Netflix, the sound doesn't work. When I double tap and go to the task manager, the volume slider has no dot. Help?

I did not have this problem earlier today. I haven't dropped it recently or any such thing. I have, however, used two different audio jacks today. Although it makes keyboard sounds when I type in my pass code, it doesn't make the sounds otherwise. I also tested the sound on temple run and it worked. My slider key is set to mute, not to lock screen. When I try to adjust the volume, it'll say "sound effects" and the volume will be turned all the way down, but it won't let me turn it up. I got this iPad in December and unfortunately did not purchase AppleCare and I believe the warranty has passed. Any suggestions as to what's wrong?

Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

TS3367 I'm having trouble making Facetime calls with my iphone 4s. I can receive them; however, I can not make them. Any ideas of how to fix this? PLEASE HELP!!! Thank you!

I am having a problem making phone calls using Facetime. I was able to use it on two separate occassions; however, now I can not. I can receive calls, but can not make them. Not sure what to do. Any ideas? Any help would be greatly appreciated.
Thank you VERY much!

There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon.

JOptionPane setMaximumSize with a JScrollPane as the object doesn't work

I am trying to use a JOptionPane for error messages. I'm trying to make the JOptionPane dialog be a minimum of 500x100 and a maximum size of 500x450 depending on the amount of text in the JTextArea inside the JScrollPane that's being passed into JOptionPane. I've tried both JOptionPane.showMessagePane(), and instantiating a JOptionPane and then setting its maximumSize, neither of which work as expected. Here is the relevant code:
public static void doCommonMessagePane( Component parent, String optMsg,
                                         String title, int msgType )
    JTextArea msg = new JTextArea( optMsg );
    JScrollPane jsp = new JScrollPane( msg );
    initOptionPaneComponents( msg, jsp );
    Dimension maxSize =new Dimension(500, 450) ;
    JOptionPane op = new JOptionPane(jsp, msgType);
    op.setMaximumSize(maxSize);
    op.revalidate();
    op.setVisible(true);
//here is me also trying showMessageDialog
//    JOptionPane.showMessageDialog(parent, jsp, title, msgType);
private static void initOptionPaneComponents( JTextArea ta, JScrollPane sp )
          Color bg = UIManager.getColor( "Panel.background" );
          Dimension jspSz = new Dimension( 500, 75 );
          Dimension max = new Dimension( 500, 450 );
          ta.setMargin( new Insets( 5, 10, 10, 5 ) );
          ta.setColumns( 50 );
          ta.setLineWrap( true );
          ta.setWrapStyleWord( true );
          ta.setEditable( false );
          ta.setEnabled( false );
          ta.setBackground( bg );
          ta.setDisabledTextColor( Color.black );
          ta.setFont( UIManager.getLookAndFeelDefaults().getFont( "Dialog" ) );
          ta.setMaximumSize(max);
          ta.setMinimumSize(jspSz);
          sp.getViewport().add( ta );
     //sp.setPreferredSize( jspSz );
          sp.getViewport().setMaximumSize(max);
          sp.getViewport().setMinimumSize(jspSz);
          sp.setBorder( BorderFactory.createLoweredBevelBorder() );
          sp.setVerticalScrollBarPolicy( JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED );
     //     sp.setPreferredSize( jspSz );
       sp.setMinimumSize(jspSz);
          sp.setMaximumSize( max );
     }

When the JScrollPane is placed into the CENTER position the JOptionPane ignores the maxSize of both the JScrollPane and the JTextArea and stretches both of these out to 500x700 so that all text is visible. You still miss the basic concept.
The answer is it depends! First the size of the dialog needs to be determined.
If you use dialog.pack() then the preferred size of all components is used to determine the size of the dialog and the scrollpane will be whatever preferred size you gave it. If you leave the preferred size at (0, 0) then the scrollpane and text area will be invisible.
If you use dialog.setSize(???, ???), then the size of the scrollpane will be adjusted to fit the available space.
The amount of text in the text area is irrelevant in determining the size of the scrollpane. It is relevant in determining whether scrollbars will appear or not once the scrollpane is displayed.
If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
Don't forget to use the [Code Formatting Tags|http://forum.java.sun.com/help.jspa?sec=formatting], so the posted code retains its original formatting.

Hello to everyone, I have a problem with my iPhone 5, the dynimic doesn't work... i didn't drop it and didn't contact with water... so should I do? please help me =( P.S. may be I wrote with some mistakes, so I apologyze for it

Similar Messages

Maybe you are looking for