Help! "Alert: No Internet Connection found" after most recent auto update!

I am on a MacBook Pro running Mac OS X 10.6.8. I connect over a wireless router and cable modem usually and do the same with a few other devices in the household. After the most recent update I was met with an airport alert: No Internet Connection on my laptop. I turned airport on and off, power cycled router and modem to no avail. I called my ISP to renew the ip or whatever it is they do and that also did nothing. While troubleshooting with the operator she told me that based on the ip starting with 169. , that signified that the laptop was not getting a signal from the router, or vice versa. I confirmed this by using airport diagnostic and noticing that it did not pick up when I power cycled my modem or router after being prompted to do so. I apologize for the wall of text formatting but I am forced to post this on my phone now. Any help would be appreciated!

Any direction on how to reset the update or anything like that would be great, thanks!

Similar Messages

Is there any fix for the bluetooth connectivity issue after most recent OS update?

Seems to be a common problem particularly with bluetooth headseat connectivity. Any ideas?

There is no bluetooth connectivity issue after the recent OS update. There may be a problem with your phone, which may or may not be related to the update. A "common problem" looks like this in the forums:
I haven't seen any threads on BlueTooth with over 1.4 million views and over 12,000 replies, or even any vaguely close. For any problem that someone has there is bound to be someone else amoung 150 million users who have it. That doesn't make it a "common problem."
If you tell us what the problem is specifically and what you have done so far to try to resolve it someone can probably help you.

The "back" button on my mouse stopped functioning in FF after most recent auto-update (today is 9/15/11). Logitech VX nano laser mouse. Still works elsewhere.

updated to 6.0

See
* Logitech mouse - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Logitech_mouse
** http://www.logitech.com/en-us/support-downloads/downloads?debug=0
*'''http://dmcritchie.mvps.org/excel/mouse.txt'''
*http://dmcritchie.mvps.org/excel/mouse-logitech.txt
If you have an older LogiTech mouse you may have to program it to use Alt+arrow-left as keystrokes instead of Back, or use the system settings.

Systems preferences do not respond....after most recent Security Update...

HELP.........systems preferences do not respond....after most recent Security Update...During the most recent Security update download, near the end of the process,clean turned all graining and seemed to freeze. I waited awhile and then turned the computer.
ever since then I can not open up any of my systems preferences, battery level,date and time do not show up on the top of the screen as before.....
I had since gone and successfully downloaded the most recent security update for the Apple site and after a restart still no battery level, systems preferences or date and time....
Any suggestions at this point.
BB
ibook g4 Mac OS X (10.3.9)

Hi, I think I need to update my profile because my computer definitely says it has 10.4.11
I managed to solve the stickies and TextEdit issues by removing Butler in the end.

IPhoto won't open after most recent automatic update

Hello,
After my most recent software update, iPhoto will not open. I click on the icon on the desktop (Macbook Pro) and nothing happens. Mac OS X (10.6.8) is my operating system.
Any help will be appreciated. I am worried I have lost all of my photos.
Sincerely,
Megan.

If you control-click on your iPhoto Library and select "Show Package Contents" there should be a folder in there named "Masters" - it should have all of your his-res photos in it.
Not certain why you're having problems just opening iPhoto - you may want to take your question to the iPhoto forum - where all of the iPhoto experts hang out.
Clinton

Eclipse IDE won't start anymore after most recent security update

Hello everybody,
after today's security update the Eclipse IDE won't start anymore on my system, I just receive the following error message:
A Java Runtime Environment (JRE) or Java Development Kit (JDK) must be available in order to run Eclipse.
No Java virtual machine was found after searching the following locations: /Applications/eclipse/Eclipse.app/Contents/MacOS/jre/bin/
java
'java' in your current PATH
Java is installed and Eclipse ran smoothly until I upgraded. Other Java programs like Visual Paradigm still work without problems.
Does anybody have an idea what I can do about this? I have already tried repairing permissions, to no avail.
Best regards,
Björn
Mac Pro Mac OS X (10.4.9)

I have narrowed down the problem even more:
Obviously system path variables are not set anymore on my system for UNIX processes that are started in background, whereas starting applications from terminal using the open command ('open Gimp.app' for instance) still works without any problems.
Any ideas where to change this behaviour?

After most recent Reader update can't save fillable forms.

After the most recent Adobe Reader XI update, we can no longer save PDFs with fillable forms on the first save attempt. A little background for you. We have forms that we periodically need to change the information in. My users came to me with this issue, when I tried it, I could save. Naturally I thought it was a rights issue since I am an admin, but I checked for Reader updates first to make sure I was on the same version. There were updates for mine, after installing them I have the same issue now. When I change the data in a fillable form, the first attempt to save I am told that it can't be saved and I will need to use a different filename or location. I click OK, after clicking OK my document name in the title bar canges from whatever.pdf to something random.tmp. Now, since it is technically a different document open I can save it to the file I want it to be. Is there a new option or function causing this? This has never been an issue in the past with these PDFs.

Hi,
Are you still facing this issue? What is the current version of Reader installed.
Regards,
Ajlan Huda.

Please help "Alert:no Internet connection"

My MacBook pro has been acting weird,I can't connect to my airport,I'm using AT&T uverse and for some reason I can't use safari or the app store,please help.It works everywhere else,on my iMac,iPhone 4s and iPod,I don't see what the problem is.
P.S: it shows a exclamation mark where the wifi thing is

At the Apple store, you will find out exactly what is wrong. You may find that the the problem may be fixed for free if it is really simple and requires no parts. It may be that you will know what to do and be able to fix it yourself. Until the problem is precisely defined, we can only speculate on what may be wrong.
If I were in your position I would take it to the store and then I would be able to make an informed decision. I urge you to do so.
Ciao.

Internet connect problems after 10.4.7 update

Since downloading the 10.4.7 update on my MacBook Pro, my mail and internet browser applications do not connect to the internet when the computer is turned on. Though the AirPort says I am connected to my network with full signal strength, both applications say they are unable to connect to the server. I basically have to disconnect AirPort, re-connect to my network and type in my password, then everything works OK. But before the update, the computer would be connected to the network successfully upon start up. How do I fix this new 10.4.7 situation?

See here:
http://discussions.apple.com/message.jspa?messageID=2620942#2620942

Running extremely slow after most recent software update. Would love some help troubleshooting and fixing, thank you!

Hi folks. Since my last software update, my computer has slowed to a near halt. Help!
I have a late 2009 MacBook Pro, running OS X 10.8.2. 2.26 Ghz / 8 gb memory.
I went into the Disk Utility and ran "verify disk," and got an "ok." Verified and repaired disk permissions. No idea if they're relevant.
At this moment the activity monitor is showing 3.79 gb of free memory -- 10 minutes ago, when I was doing nothing particularly differently, it showed all 7.99 gb in use (active and inactive -- I have. No idea what this means.)
It's all beach balls around here, all the time. Any ideas?

Your problem is excessive swapping of data between physical memory and virtual memory.
That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination. In Activity Monitor, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more memory over time without ever releasing it.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details:
Memory Usage Performance Guidelines: About the Virtual Memory System

Both iPhoto and Mac Mail not working after most recent security update

Granted I wasn't there to see it happen but I think my mom's computer here is a bit fubar based on something having been changed on her computer prior to the last security update. My guess is that her friends who think they are 'helping' are actually causing some real problems but I'm here now so I'm just trying to fix it with what I can.
Essentially neither her mail or iPhoto seems to be working. I've found a similar error message in other posts but what throws me for a loop is that, when I use the console log and look at the crash files for both applications, they are both telling me the exact same thing. Could they both be pulling the same file for use? I've already run the disk repair stuff, changed the permissions on the file and just about everything else I could think of - do I need to reinstall the application or perhaps the entire operating system?
Link (dyld) error:
Library not loaded: /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/QuartzComposer
Referenced from: /System/Library/Frameworks/Quartz.framework/Versions/A/Quartz
Reason: no suitable image found. Did find:
/System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/QuartzComposer: unknown file type, first eight bytes: 0x6D 0x65 0x00 0x00 0x69 0x73 0x46 0x69

Hi, I think I need to update my profile because my computer definitely says it has 10.4.11
I managed to solve the stickies and TextEdit issues by removing Butler in the end.

Amd64 file error; Windows Update issue after most recent Microsoft update, can you please assist?

received this error after running error report. Got this error from my sfcdetail report: Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture
neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-12-22 19:31:46, Info                  CSI    000008cb [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
HAVE NO IDEA WHERE TO GET A GOOD COPY OF THIS FILE. I TRIED TO DO AS MUCH TROUBLE SHOOTING AS POSSIBLE.       ***UNDER CONTRACT****

This issue still exists! My issue has not been resolved and is only getting worse. I'm now receiving a windows update standalone installer- installed encountered error 08x00704c7 server execution error. In addition, I am unable to attach
to Microsoft's server????? I received nothing that would have helped me to answer my question in my inbox and I did make additional comments on this page for this issue.
It was stated that I was unable to run the dism command!!!!!!!!! Rights issue? Windows update is not functioning either (see above)
Thanks for you help thus far I am still trying to copy some data into this problem to include with the issue.
s.hamel

Delayed startup after most recent Security Update

I just updated my MacBook with the new security update last night. After its installation, I cliked "shut down" and went to sleep. This morning I started it up and it stayed indefinietely on the initial gray apple screen. I don't know where to go from here. Any help would be appreciated.

I thought that this happened to myself as well, but I just let the computer run at the gray screen, and the apple and loading indicator came up a minute later. It stayed this way for a while, then it restarted itself and all is well.

My kindle and google apps on my iPad are not working after most recent software update

After latest software update on my iPad mini I cannot get the Kindle, google or Netflix apps to work?

have you gone to the app store program to check if there are updates for those apps to work with newer versions of ios ?

TextEdit and Stickies not working after most recent security update

Hi,
I recently installed security update 2007-009 (Universal) along with Java for Mac OS X 10.4 Release 6.
Immediately afterwards I had real trouble with some third party apps such as Butler.app, as well as Stickies.
The problem seemed to resolve itself, but it has come back with a vengeance tonight. Neither Stickies nor TextEdit will let me type beyond a few characters before "not responding". Butler has also not loaded.
What is going on? And what can I do to use my most practical writing tools? This is incredibly frustrating.

Hi, I think I need to update my profile because my computer definitely says it has 10.4.11
I managed to solve the stickies and TextEdit issues by removing Butler in the end.

Help! "Alert: No Internet Connection found" after most recent auto update!

Similar Messages

Maybe you are looking for