HELP!!!! Aperture 1 won't open after I installed Snow Leopard.

Aperture 1.5 won't open after I installed snow leopard. Why is it not working?

Because it's incompatible. You need to upgrade to version 2.1.4 or newer.
(56089)

Similar Messages

  • Bento won't open after upgrading to Snow Leopard?

    Bento will not open since installing / upgrading to Snow Leopard 10.6 -- just simply tries to start up and quits immediately. Any suggestions other than trashing the existing application and restoring / reinstalling from my original software discs that came with my new Mac Book Pro laptop? It was working just fine prior to upgrading to Snow Leopard yesterday.

    Download the updated version of Bento to use the application with Snow Leopard. This should fix the problem!

  • Help - Aperture won't open

    Help - Aperture won't open because graphics card does not meet minimum standard - Mac is only 4 yrs old- suggestions?

    I have a 2009 21.5 iMac that runs Aperture 3.4.3 (the latest) so I would be very surprised if a 2009 24in iMac could not run it.
    Is this a new install? Are you upgrading Aperture from an earlier version? Has Aperture (any version) ever run on this system?
    I would reboot just to be sure that somehow you haven't gotten into safe mode and then try Aperture again. If it fails open the console logs (/Applications/Utilities/Console) and look to see if anything concerning Aperture of the graphics card is being logged.

  • "General" in Settings won't open after I installed the iphone 4.0 upgrade.

    "General" in Settings won't open after I installed the iphone 4.0 upgrade. Any ideas?

    Have you tried to reset? Hold off button and home button together until Apple apears.

  • Logic won't open after i installed it

    Hey there,
                   after i installed logic pro 9 on snow lepoard, it won't open along with all my other applications that were fine before i installed logic. It gives me a problem report that i don't really understand. i need help!!!

    Yes.. you cannot easily downgrade from one OS X to another without starting again from fresh..... otherwise you can easily get the sort of issues you are having.
    Solution.... (The short version)
    Make sure you have first got backups of all your personal data, projects, photos, music etc..... 
    Double check youn have saved all your personal data out.
    Ensure you have your Snow Leopard Installation disk(s) to hand..
    Boot to your SL installation disk..
    Reformat your hard drive using the Disk Utility found in the SL Install menu bar..
    Re-install Snow Leopard.
    Install Logic Pro 9, update to latest version and test.....
    If Logic will not launch then install that Prokit I gave you the link for...   and test again. Do not install it if Logic works ok..
    Install any drivers for audio/midi hardware if needed and ensure correct versions are installed for OS X version.
    Install all 3rd party plugins and apps..
    Manually transfer all personal data and projects etc... back to your newly setup Mac...
    Test again....
    Long version....
    http://support.apple.com/kb/HT3910?viewlocale=en_US
    Important Note: Do not use Migration Assistant but manually back up and restore all personal data etc....

  • My illustrator won't open after I install

    my illustrator won't open after I install

    menya,
    I believe you may as well go straight to 6) on the list.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save curent artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Pages won"t open after upgrade to Snow

    Should"ve known there were going to be problems...now after installing snow leopard, my pages will not open, my mail will not open, keynote, numbers. ical...a huge number of issues, and now with schol starting I cannot use my computer to do any work.......Any helpful thoughts would be greatly appreciated
    Tom

    Hi Thomas
    The issues most people seem to be having are
    1. Duplication of fonts and some wonky fonts. Check these and fix them in *Font Book.*
    2. That they did not correctly transfer iWork. You can't just simply drag the software over, nor will it work if you had changed the names of the folders they were in. You should have done a full migration or possibly reinstall if you can't get out of the problems.
    3. You need to have upgraded the software to the latest versions.
    Peter

  • IPhoto won't open avi files in Snow Leopard

    before I instaled Snow Leopard clicking on an avi file in iPhoto opened the file in Quick Time. After installing Snow Leopard I either have to put them on the desktop, or drag them onto Quick Time. Any ideas how to make iPhoto work with Snow Leopard?

    I am having the same problem.
    Open iPhoto 08 - click on video and nothing plays - went to original file and changed default application to iPhoto - then clicked on video in iPhoto and get error message with file cannot be read - changed default back to Quicktime and still cannot play in iPhoto like before.
    Help! Very annoying to open original folder

  • Ipad won't sync after updating to snow leopard

    Any help available regarding a non-syncing ipad first gen, after updating to snow leopard on my imac?  The ios software on ipad is up to date, and the snow leopard version is also up to date.  The computer will not even recognize that the ipad is connected.  Thx.

    Try something very simple first. Quit iTunes, reboot the Mac and restart the iPad. Then try again.
    I had some issues when I first installed SL on my last MacBook, and I still have issues every now and then with the iPad not being recognized (now running Lion 10.7.3 on a new MacBook Pro) and this has always worked for me. You may have to reboot the Mac a couple of times - but try it and see if it works for you.

  • Firefox won't open after re-installing and can't remove from control panel. What do I do?

    After a storm and short power failure, I started having trouble with certain sites loading, and pages moving slower. I emptied my cache and defragged and ran total virus/ malware scan, but still had problem. (Pages loaded fine on AOL) I decided to uninstall Firefox and re-install to help fix problem. I did this, and now Firefox won't open, no matter if I double click, right click (open), or go through "all programs". I tried to uninstall and re-install again, but now I can't get it to respond through my control panel, either.

    Try the procedures in the [[Firefox will not start]] article.

  • IPhoto won't open after new install and restore of back-up

    Hi guys
    My hard drive just died (for the second time in 6 months!) so I have just gotten the computer back with a new drive. I did a new install of Tiger from my original install CDs, did the download thing to get all the updates, and ran a "restore" from my external drive using iBackup (http://www.grapefruit.ch/iBackup//index.html) to restore all my previous system settings, documents, etc. So far this seems to have worked well, a couple of 3rd party applications didn't re-install - specifically Neo Office and WiFind - but I was able to manually install those and everything seems to be working fine.
    Except iPhoto. It won't open. When I click the dock icon it bounces once and does nothing. No little arrow under it or anything. Nothing at all happens when I click the icon in Finder (in the Applications folder). When I searched it in spotlight it told me there was a file called iphoto.crash.log, so I went and had a look at that hoping it would tell me the problem, but I don't understand it. I'm not particularly good at the behind the scenes stuff with computers.
    Wondering what I should do now - if someone can perhaps interpret the log file and find the issue if that would help, or if I should uninstall and re-install iPhoto by itself (and if so, how?), or if there is something else that may be causing the issue. I noticed there are a few files relating to it when I search with spotlight but I don't know which of them might be relevant. I could post a screenshot if that is allowed, or post the log file if it would help?
    Thanks in advance for any advice or help!
    Regards,
    Chloë

    400 Updates???
    Did you Repair Permissions before & after each one?
    The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
    The combo update for PowerPC-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
    The combo update for Intel-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
    Repair Permissions before & after re-install, then reboot again each time.
    If all the above do not resolve the problem, then it's time for an Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
    http://docs.info.apple.com/article.html?artnum=107120
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

  • Issues, iphoto won't open after archive install.

    Hi there, got issues here. Previously I had accidently deleted a very important file in private/var/ and had to do a archive install. The shop swapped out my original 500 GB and put in a 2 TB. Great, turned it on, everything looks good. However, couple things not going so well. My pro apps aren't working but thats in another thread and now, I went to open iphoto and it won't open, says:
    iphoto cannot be opened because of a problem
    log shows this
    Process: iPhoto [2352]
    Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier: com.apple.iPhoto
    Version: ??? (???)
    Build Info: iPhotoProject-5270000~1
    Code Type: X86 (Native)
    Parent Process: launchd [88]
    Date/Time: 2011-02-08 10:08:13.107 -0600
    OS Version: Mac OS X 10.6.6 (10J567)
    Report Version: 6
    Interval Since Last Report: 53970 sec
    Crashes Since Last Report: 15
    Per-App Crashes Since Last Report: 2
    Anonymous UUID: CA4F49CB-7A97-494E-9653-81EDA451C528
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread: 0
    Dyld Error Message:
    Library not loaded: /Library/Frameworks/iLifeFaceRecognition.framework/Versions/A/iLifeFaceRecognit ion
    Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <749D24EE-54BD-D74B-D305-C13F5E6C95D8> /usr/lib/dyld
    Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.21f4
    Graphics: ATI Radeon HD 2600 Pro, ATI,RadeonHD2600, PCIe, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.1)
    Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST32000542AS, 1.82 TB
    from what I can see in this is image not found, no cue what that means. Hope someone can help me out with this. Thanks

    No I do have a back up Its kinda long to explain but last a little over a week ago, i delete a important file in my private/var folder and screwed up my computer. Worst part was I didn't run time machine for almost a month that way all my pics that I did bring on weren't backup up. i know this sounds careless but normally does happen like this. Anyway I had to take my imac into to get it fixed and the only way to do it without losing all my data was to do an archive and install and of course my drive was full so they had to swap it out and they put in a 2 TB and ya, so now I am where I am at. Everything is here but got pro app and iphoto issues. I guess worst case scenario if something does go wrong on the install I kinda do have a back up as the old drive can be put into a enclosure and used as a HD but I guess it is a bootable drive so I don't know if it would mount properly. Thanks for you help though/ Really Appreciate it.
    Nat

  • IBooks, Mail, After Affects, Quick Time Player, Maps, App Store, won't open after Mavericks install/update

    Just about everything on computer is slow as mollases after Mavericks Update. I am very angry because I can't use After Effects at all. It says it's not compatible with this new system. My mail application crashes as soon as I open it. Notification centre is non-existent now and Messages app won't open at all. Other apps such as iBooks, Mail, After Affects, Quick Time Player, Maps, App Store, and a few others won't open at all on this new system. I'm soo angry with Apple as I've never had so many problems with a new OS X. .. I would love to downgrade back to Mountain Lion OS. Anyone with helpful info, please respond. Thanks.

    Hi,
    From the top More Like This item
    https://discussions.apple.com/message/23487600#23487600
    7:29 pm      Sunday; October 27, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Aperture won't open after FCE installation

    Just installed FCE for first time (version 4.0.1) and now Aperture 3 simply will not open; get message that says "Aperture will not open because of a problem" and that I may have to reinstall it. It was working fine before I installed FCE.
    Have MBP with 10.6.4 and 4 Gigs RAM; all are updated; ran Disk Utility.
    Anyone?

    For anyone curious, the Aperture "framework files" that go missing after installing FCE are located at:
    Macintosh HD > Library > Frameworks > PluginManager.framework > Versions
    If you have time machine backups, this is an easy fix. Much easier than reinstalling Aperture. Just go back to before you installed FCE, and restore the missing files. It should be a folder named "A", a folder named "B", and a folder named "Current."

  • App Store Won't Open After Mavericks Install :(

    Since installing Mavericks my App Store won't open.  I click and it bounces one time then....nothing.  Any ideas on how to fix this?
    I discovered this when I noticed that Image Preview won't open. I thought that there was an update for it so I went to the app store to see and discovered it won't open either!

    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About
    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account

Maybe you are looking for