HELP! Display appears too large for screen!

Weird thing happening... The display on my iPhone for some reason is appearing too large for the screen, as if I zoomed in on the display slightly. I can't figure out a way to fix this.
Here's what it looks like. Notice the bottom half of the "scroll to unlock" is cut off... the whole thing is off-centered bcause of the zoom) http://i37.tinypic.com/25qvpr4.jpg
I updated to the latest software/etc... because I figured that that might resolve the issue. Restarted the phone. Can't fix. Trying to avoid my local Apple store, since it's an absolute mob scene. Any advice?
Message was edited by: cohanj087

You have zoom on, probably.
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
The manual will tell you how to turn it off.
Page 190:
"Turn Zoom on or off: In Settings, choose General > Accessibility > Zoom and tap the
Zoom On/Off switch.
Note: You cannot use VoiceOver and Zoom at the same time.
Zoom in or out: Double-tap the screen with three fingers. By default, the screen is
magnified by 200 percent. If you manually change the magnification (by using the tap-
and-drag gesture, described below), iPhone automatically returns to that magnification
when you zoom in by double-tapping with three fingers.
Increase magnification: With three fingers, tap and drag toward the top of the
screen (to increase magnification) or toward the bottom of the screen (to decrease
magnification). The tap-and-drag gesture is similar to a double-tap, except you don’t
lift your fingers on the second tap—instead, drag your fingers on the screen. Once you
start dragging, you can drag with a single finger.
Move around the screen: When zoomed in, drag or flick the screen with three fingers.
Once you start dragging, you can drag with a single finger so that you can see more
of the screen. Hold a single finger near the edge of the display to pan to that side of
the screen image. Move your finger closer to the edge to pan more quickly. When you
open a new screen, Zoom always goes to the top-middle of the screen.
"

Similar Messages

  • Mac Mini display is too large for screen on only one user account

    Okay, so I left my two year olds alone for a minute playing the "alphabet game" on my Mac Mini. They only had the keyboard, no mouse but managed to muck up my display leaving me a bit frustrated.  The screen is now too large for my Samsung display. The only way to see everything (dock, top bar, etc) is to move my mouse arrow to the end of my display and see it roll back onto the page.  I've checked the settings there and they are fine. The MacBook Pro plugs right in and is proper resolution. So I then wondered if another account on the Mac Mini would do the same thing. I logged out of my Admin account and into another and everything looks just dandy. I log back into my Admin account and it's too large and blurry again. The resolution is set correct at 1920x1080 at 60 Hz.
    What button did they push on my keyboard that would do this and how do I get it back?? Aargh! Thanks all!

    Ha, figured it out myself from another discussion forum finally. Thoght I'd share in case anyone else runs into this. They must have hit "Zoom" by htting the "Control" and scroll buttons at the same time..
    Resolution:
    You can zoom out by holding down the Option and Command buttons on the keyboard and, while you hold them down, pressing the - key. 

  • PSE Workspace too large for screen

    I'm using PSE v.11 with OSX on an iMac.
    The PSE workspace is too large for the screen e.g. the five icons to the left of "Add Event" on the lower control bar are not visible.
    Have noted previous discussions have mentioned a "green button" - what's that ?
    Help appreciated.

    But I'd try going to system prefs>displays and changing your resolution a few times till it snaps into place. You aren't running this on a first generation macbook air, are you?

  • OS10.3.1 a disaster! Among other things, the dsplay is too large for screen

    I do not like OS 10.3 ! After my Z10 was updated to 10.3.1.1779 about a month ago, I access it because the password entry keyboard displayed for about 1/10 sec leaving a black screen.
    After a device reset the device the keyboard remained visible but did not respond to touches (actually it did respond randomly to some). Finally another reset gave me a usable keyboard.
    But the device always opens with an icon display about 20% too large for my screen and requires several shrink attempts before the proper size displays. Each attempt simply bounces back to the oversize state.
    Unfortunately, this also happens with every app (including "Settings") opened. Yesterday, I couldn't return to the main of Settings because the sub-page wouldn't shrink to expose the "<' button - a close and re-open was the only way to get back to the main page.
    Other points I hate about the OS: I've noticed my active wallpaper (not custom but from 10.2) is not listed in the the new 10.3 wallpaper list and since I don't know where its stored I can't try one of the newer ones without giving up on the present wallpaper.
    The date displayed on the home screen is too faint to be read with my wallpaper. I know there are some people who think black on black is cool; they obviously have great eyesight. The new 10.3 compass is now totally useless and the new clock is not much better but is at least still usable by a change to a digital display.
    I recently tried to check the time on a sunny afternoon and gave up because I couldn't make out the white lines on the black background. I find the stupidity of black on black unfathomable and in over 40 years of software development I have never seen something as wasteful of engineering time as products with poor user interfaces (i.e. black on black). Why can't these apps offer the user the ability to change the colour?
    The calculator has also regressed. Again all black (cool!), though that's not the issue here. For the longest time I thought it no longer supported scientific operations until I accidentally got a lucky swipe to bring it into view.
    However, the requirement of a half-dozen swipe attempts for each display change reduces this app to a space waster or only to be only useful for simple operations and units conversion. I'm going to try a reload of the OS but unfortunately that won't improve the apps.
    Is this standard procedure that Blackberry destroys all (blackberry) apps of the previous version with new ones at each update and offers no way to get back or protect against such changes?

    Hi All,
    I have already checked below configuration T-Code Value :
    T-Code : OBA0 :
    Tolerance for Groups of G/L Accounts in Local Curre :
    Debit posting : 0 TWD, Percentage 0 %
    Credit posting : 0 TWD, Percentage 0 %
    T-Code : OBA4 :
    Upper limits for posting procedures :
    Amount per document : 9,999,999,999,999
    Amount per open item account item : 999,999,999,999
    cash discount per line item : 1%
    Permitted payment differences :
    Revenue : Amount 100,    Percent 1%,  Cash discnt adj. to : 100
    Expense : Amount 100,     Percent 1%,   Cash discnt adj. to : 100
    I don't understand when AR open item amount is USD 100.3, and incoming payment 101.12, The system can auto clearing by current configuration, but change the AR open item amount to USD 0.3 and change incoming payment amount to 1.12, The system alert error message "The difference is too large for clearing". The same system configuration and the same "Not assigned" value in choosing open item screen, but produce different results!
    How should i change the configuration?
    Best regards,
    Eric
    Edited by: Eric  Yang on Sep 12, 2008 2:12 AM

  • Lumia 635/WinPhone8.1 emails too large for screen

    recently upgraded from 620 to 635 and im beginning to think it was a mistake. 
    build quality and speed issues aside, whats annoying me most today is that many emails with embedded pics dont fit on the screen (theyre too big) and wont zoom out or scroll across so i lose large portions of the right hand side of the message. is there a way to stop this and make it "fit to screen" as i cant find anything in settings

    Hi tremph,
    Thank you for your question. You can change the window size with a few cool add ons [https://addons.mozilla.org/en-US/firefox/addon/automatic-window-resizer/ Automatic Window Resizer] and [https://addons.mozilla.org/en-US/firefox/addon/firesizer/ Firesizer].
    # In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
    # Click '''I'll be careful, I promise!''' to continue to the about:config page.
    # What is the feature [http://kb.mozillazine.org/Browser.display.screen_resolution]

  • Adobe Interface too large for screen-cannot read

    Have just downloaded free trial of Adobe Acrobat Pro 9 beta
    -- cannot see the entire screen -- can anyone help?
    Thank you!

    Hi boraxo99,
    Thanks for your post. However, this Forum is meant to discuss
    issues related to acrobat.com and not acrobat. To post an issue
    related to acrobat please visit the acrobat forum :
    http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
    You may also open a web case with Adobe Support. To do so,
    please visit the following link :
    https://www.adobe.com/cfusion/support/index.cfm?event=portal

  • Picture too Large for Screen

    Is there a way to adjust the cable box so that the picture adjusted properly to fit the screen?  Currently I have a Phillips 30 inch Widescreen HD tv and certain channels dont fit the screen.  (ESPN News QVC Fox Business) .   The Tv does not have a strecth or zoom feature, I looked in the manual.

    james6912 wrote:
    Is there a way to adjust the cable box so that the picture adjusted properly to fit the screen?  Currently I have a Phillips 30 inch Widescreen HD tv and certain channels dont fit the screen.  (ESPN News QVC Fox Business) .   The Tv does not have a strecth or zoom feature, I looked in the manual.
    What do you have your 4:3 override set to?  Try setting it to "OFF".  This will output in whatever your HD resolution is set to with "pillars" for SD content.  The other thing is what do you have the output resolution set to?  My guess is that your 30" set has a native resolution at  720p (or near that).  If you are set for 1080i output it may be the scaler in your TV causing the image over the screen size issue.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Display is too big for screen on start up

    When I turn on my macbook, the disply is too big, and I can't see the right 3 inches of my screen.  When I put it to sleep and bring it back up, it correctly fits on the disply.  Any ideas why this does this, and how to correct it? It has been doing this several months now.
    -Thanks!

    Ha, figured it out myself from another discussion forum finally. Thoght I'd share in case anyone else runs into this. They must have hit "Zoom" by htting the "Control" and scroll buttons at the same time..
    Resolution:
    You can zoom out by holding down the Option and Command buttons on the keyboard and, while you hold them down, pressing the - key. 

  • Iphoto movies too large for screen after upgrade

    My movies in iphoto recently stopped playing, so I turned to the forums and tried the fix related to upgrading to Snow Leopard.  This mostly worked (I also had to open Quicktime 7 to kick it off), but now the movies, especially in portrait format, extend below the bottom of the screen.  Since the resizing and controls are on the bottom of the pane, I have no way of accessing them, so I cannot play the clips or resize.  Any suggestions?

    Close off Safari from multitasking:
    Double-tapping the Home button will bring up the running apps icons along with an app screenshot "card" above the icon. Tap-drag the app's -card- (NOT the icon) up and off the screen.
    Next, reset the iPad:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • HT1338 Since having my Macbook Pro attached to a large display screen, everything is too large for the screen. Is there a cure please?

    Today I had my Mac linked to a projector screen, and since disconnection evrything from the desk top onwards has been too large for the screen. Before that evrything was perfect. I have tried zoom buttons etc, but nothing seems to work. Any help gratefully rceived.

    So it's not the Zoom feature?  Open System Preferences Universal Access pane Seeing tab.  Make sure Zoom is turned OFF.
    If it's not that, then you may have the resolution set so that it is not optimal for the built-in display.  Open System Preferences Displays pane Display tab.  The optimal resolution is usually the one at the top of the list of choices.

  • I updated to iTunes 11 on my Windows PC. Since the update, when I open iTunes its window is too large for my screen. Resizing is a pain, because I have to change my screen resolution. And when I restart iTunes,it has reverted back to being too large.Help!

    I recently updated to iTunes 11 on my Windows PC. Since the update, each time I open iTunes its window is too large for my screen. Resizing it is a pain, because I have to change my screen resolution. And then when I restart iTunes, it has reverted back to being too large. Please help!

    Having the same issue here....a quick fix is to just minimize the window, and immediately maximize it.  It will now fit the screen.  Trouble is, after you close it, you'll have to do it again when you re-start itunes.  The good news is it takes all of about 2 seconds.  Apple should fix this.  Should.

  • Since updating Iphone 4 the screen display is too large

    Since updating my Iphone 4 the screen display is too large to fit on the screen. For example the green battery graphic is so large half of it takes up the full screen.
    I pressed restore and restored the phone. I then restored my backup files and I still have the same problem.
    Does anyone have any suggestions?

    This is asked and answered many,many times and is covered in the manual ( Zoom feature).
    iPhone User Guide (For iOS 4.2 and 4.3 Software)
    Double tap with three fingers

  • When firefox is loaded the display is too big for the screen & blocks out controls

    When I load Firefox Home, the display is too large to fit into the screen making it impossible to see the controls (Toolbar and log-out cross etc) This has only just happened, everything was working perfectly until about an hour ago

    Open the system menu via Alt+Space and see if you can resize that window.
    If that works then close Firefox (File > Exit/Quit) to save that setting.
    See also:
    * http://kb.mozillazine.org/Resizing_oversize_window
    If the above didn't help then see:
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • My time Machine keeps saying, "Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 345.74 GB but only 289.80 are available." I have already excluded files. I have a 1tb external drive. HELP!!!

    For over two weeks now I have been frustated and not having my TIme Machine back up to my 1tb external drive. I dont understand why now its a problem.  It keeps saying
    "This backup is too large for the backup disk. The backup requires 345.74GB but only 289.80GB are avialable.  Time Machine needs work space on the bakup disk, in addition to the space required to store backups. Open Time Machine preferences to select a large backup disk or make the bakup smaller by excluding files." So I have already excluded almost all of my files, and even deleted the backup disk yet, that quote still keeps popping up. I am truly at a wall with this. I have a Mac OS X version 10.7.5. CAN SOMEONE HELP ME PLEASE????

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • Code too large for try statement - help :(

    Please help :(
              We are migrating our project from an older technology, Kiva from netscape
              (and about time we migrate) . Kiva uses template evaluation similar to
              jakarta velocity. So the fastest way we found was to translate kiva
              templates to JSPs via perl script. All is working fine except a bunch of
              JSPs which are too large for the compiler to handle. If we were not
              migrating and instead wroking from scratch we would have simply made the
              JSP's size smaller and used jsp:include, but in this case it will involve a
              lot of effort as that means changing a lot of business code.
              Basically what we get is "code too large for try statement". Is there anyway
              we can tell weblogic to put smaller code fragments in try/catch when it
              converts a JSP into java code.
              

              Haider,
              Have you seen the following Sun Bug Parade posting
              http://developer.java.sun.com/developer/bugParade/bugs/4210912.html
              Additionally, you may want to try the '-noTryBlocks' jsp compiler switch and see
              if it makes a difference
              See the following 6.1 URL
              http://edocs.bea.com/wls/docs61/jsp/reference.html#57805
              Chuck Nelson
              DRE
              BEA Technical Support
              

Maybe you are looking for