HELP For Replacement CPU PowerMac (970 V.2.2) What is the correct model?

Hallo!
I have a question for you!
I have a PowerMac G5 (2003) with cpu PPC G5 970 (v.2.2) 2GHz as seen in System Profiler;
My Mac is a Dual processor, but one CPU is brocken and today it runs with only one CPU.
Now I want to buy the second CPU in ebay, to replace the second CPU broken, but I can't find nothing of clear in apple part number, in fact I Have a CPU 630-4890.
Reading service manual I think that I must search a 661-2901, but i don't know if this is correct!
There is someone that can help me in this choice?
Thank a lot!
Paolo

Look at the model number like the other member said to do . But it you change out the cpu yuo need to re calibrate the fans on it . You need the dvd that will re calibrate the fans for the new processor . The apple service diagnostic disk or better know as the thermal calibration of the fans . Thats a must or I think you will burn up the new processor .
get a service manual plus the disk I told you about . Goto ebay for that .

Similar Messages

  • I would like to replace the hard drive cable for a 13" mid 2010 macbook pro.  What is the right model of the hard drive cable?

    i would like to replace the hard drive cable for a 13" mid 2010 macbook pro.  What is the right model of the hard drive cable?

    https://www.ifixit.com/Store/Parts/MacBook-Pro-13-Inch-Unibody-Model-A1278-Mid-2 009-Mid-2010-Hard-Drive-Cable/IF163-013-1
    Apple Part #: 922-9062, 821-0814-A

  • What is the correct model no Bluetooth card for early 2005 G5

    Hi, Could someone please tell me the correct model no Bluetooth card for an early 2005 2.0Ghz Duel Processor PowerMac G5 (Serial CK5300SCRTY), i have two model no's but am confused about the correct one, one is A1115 and the other is A1044.
    Also is the correct Airport Extreme card model no A1027 for this mac?.

    Airport Extreme Card (Europe, Asia, Australia) PART NO: M8881Z/A, Model No. A1027
    Apple Bluetooth Card for Early 2005 G5, PART NO: 922-6784, Model No. A1115
    Apple Bluetooth Card (REV 3) for G4, iMac, eMac, G5 (through late 2004) PART NO: 922-6876, Model No. A1044
    Do not confuse the G5 A1115 with the Mac Pro A1115.

  • For EOS Rebel SL1 what is the correct wired remote shutter/timer?

    I'm looking at getting a Rebel SL1 for someone.  She'll want to do long exposures(bulb).  What is the correct model of wired remote timer?  The website shows the RC-6 (which seems to just be a wireless shutter) but not the wired remote.  The instruction manual shows a jack but doesn't indicate what model remote or what time of jack.

    For wire shutter release, you'll need the Canon RS60-E3
    http://www.bhphotovideo.com/bnh/controller/home?O=&sku=70561&Q=&is=REG&A=details
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

  • Mapping Help for replacing source value

    Mapping Help for replacing source value
    Posted: Mar 14, 2006 1:06 AM    Reply 
    Hi all,
    I am unable to do transform the source value to required target value,
    From Source ADDRESS_TYPE = 'HOME' should be replaced with 03 to target field ANSSA, and 'MAIL' to be replaced with 05, I am trying to do it but i am unable to handle it, please give u r valuable suggestions,
    The source structure is like this,
    - <Event ID="239" TRANS_TYPE="ADR">
    <PersAddr GEO_LOC_CD="US" EMPLID="29" ADDRESS_TYPE="HOME" EFFDT="02/15/2006" ADDRESS1="92nd Floor" ADDRESS2="812backstreet" ADDRESS3="" ADDRESS4="" CITY="London" COUNTY="" STATE="AN" POSTAL="EC2N 4AG1" COUNTRY="GBR" KEY1="29" KEY2="HOME" KEY3="02/10/2006" />
    <PersAddr GEO_LOC_CD="US" EMPLID="29" ADDRESS_TYPE="MAIL" EFFDT="02/15/2006" ADDRESS1="92nd Floor" ADDRESS2="812backstreet" ADDRESS3="" ADDRESS4="" CITY="London" COUNTY="" STATE="AN" POSTAL="EC2N 4AG1" COUNTRY="GBR" KEY1="29" KEY2="MAIL" KEY3="02/10/2006" />
    </Event>
    REGARDS,
    sridhar

    Hi,
    This can be done using user-defined function as well.
    Code the function as...
    if(Addr_Type.equals("HOME"))
       return "03";
    else if(Addr_Type.equals("MAIL"))
       return "05";
    else
       return "Invalid Address Type";
    Here, Addr_Type is Input String Argument for this function.
    Map this function between ADDRESS_TYPE and ANSSA.
    Regards,
    Uma

  • What is the correct part number for the LCD inverter board for an A1138 15" powerBook G4 ( 1.67GHz superdrive/ Hi-res)?

    What is the correct part number for the LCD inverter board for an A1138 15" PowerBook G4 ( 1.67GHz superdrive/ Hi-res model)?

    Hello,
    Part number 614-0305-A
    Hope this helps.

  • What is the latest model/generation for ipod touch?

    what is the latest model/generation for ipod touch?

    Stedman1
    I'm not sure how all of this works but I read a few of yur comments and figured you'd be the person to ask! I have an iPod touch as well as my iPhone 4. I'm trying to find an otter box for the touch because I truly love it on my ip4, not to mention ive given the touch to my 6 year old and NEED the protection. Anyway, I'm not positive which generation it is and don't want to order the wrong one. The model # is A 1367.
    Any help?? Please!!!!

  • What Are The Correct Gray OS X Discs For This Imac?

    I got a free 700Mhz G4, 15" Screen, 512mb Ram, 40GB HDD and I was wondering what are the correct OS X discs (Gray) that came with this Mac?
    There has to be a serial or model number right? I have Leopard installed on it and I missing having the DVD player so could I connect the iMac to my PowerMac G5 using Target Disc Mode, and then install Panther or Tiger onto the iMac through it?

    Liquidus wrote:
    I got a free 700Mhz G4, 15" Screen, 512mb Ram, 40GB HDD and I was wondering what are the correct OS X discs (Gray) that came with this Mac?
    The correct Mac OS restore discs are Mac OS X 10.1.2 and Mac OS 9.2.2. I have restore discs for a 600MHz Late 2001 iMac G3, which has the same identical software as the iMac G4. That part number for the disc set is 603-0372.
    For the second part of your question, you can install Panther or Tiger through Target Disc Mode from your PM G5.
    -Brian

  • On my i pad mini what is the correct procedure to LOCK our IPAD MINI for automatic i cloud back up ?

    on my i pad mini what is the correct procedure to LOCK our IPAD MINI for automatic i cloud back up ? I am never sure the back up is working. It checked the owner manual but did not find what I need. Can someone give mt the step by step "how to" help so That I know everything is completely backed up to i cloud
    thank you
    olefuzz0115

    Are you plugging in every night, locking the iPad and connected to WiFi? Are you meeting all three requirements?
    Well that is what I do and it works for me because I can see the next day that the new backup shows in Settings>iCloud>Storage and Backup>Backup Now. If you look at my screenshot - you will see that I experimented to make sure that it would work. I responded on July 3 at 12:24 PM when you posted. Then I locked the iPad, plugged it in and waited for about 30 minutes before I unlocked the iPad to see if it backed up. The screenshot shows the backup was completed at 12:44 PM on July 3.
    I also backup with iTunes and I almost never auto backup. I just initate the back up on my own. But the instructions that I posted are right from the settings. You can read it for yourself in the screenshot.
    You do have to wait for at least 24 hours before the next backup will take place, but if you are getting a message that you haven't backed up a week later, I can't explain that.
    Dont trust that message. Look and see what the date of the last backup was. That's the only way to know for sure.

  • HT3228 What's the correct email settings for the fastest email receiving on my iPhone 4s

    What's the correct email settings for the fastest email receiving on my iPhone 4s

    As no one here knows who your email provider is, no, no one can help. Have you tried looking at your email provider's help pages? Done an internet search?

  • What is the correct Page Width for Mobile Device???

    Hi All
    Just have a question that "What is the correct Page Width for Mobile Device???"
    Is the Default 380px width is right? or 320px?
    Because the average smartphone is having resolution is 320X480 pixels...
    also in this video http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-designing-for-mobile-devices/ Dani Beaumont created the Mobile version website in 320px width (If you watch the video carefully you can notice the page width is 320px)
    And if the default page width 380px taken, will it be displayed correctly on every smart phone (average & high end)?
    please reply if you have any suggestions

    HI. I have designed a mobile web site that is currently 450pixels wide. This is the first one I have done. When it displays on some mobile phones, the width of the entire page is scaled down and it only fills about 1/2 of the width of the mobile phone with a whole pile of mrgin to the right. Is this because I should have designed it to be 380 pixes wide or have I done something else wrong. The test site is at:
    http://ancasterdental.com/muse/phone/index.html
    Please help me if you can. Thank you.
    john.

  • What is the correct wireless driver for x31 type 2672-phh ?

    Do i have to install a wireless network driver first ? What is the correct driver for a x31laptop type 2672-PHH ? Is it the "6hwc05ww.exe" ? Its not working for me. A command prompt just pops-up and saying something "kill_app.exe" and "inst_app.exe" then it just disappears. What is the correct driver ?
    Message Edited by kleinski23 on 06-23-2009 03:01 AM

    Hi and welcome to the forum pythonscript!
    If it's driver issue then you should see yellow marks in the device manager, your post doesn't say so, but let's start with the driver. Your system has ThinkPad card and following is the correct driver that needs to be installed for your wireless card:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73701
    There is a hardware wireless radio switch on your SL410, make sure it is turned on too.
    Keep us informed.  
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • What is the correct cable for iMac 11,2 Intel core i3, mini dvi to vga or mini display port to vga?

    What is the correct cable for iMac 11,2 Intel core i3, mini DVI to VGA or mini display port to VGA to hook up to projector? Thanks!

    mini-DisplayPort.
    Regards.

  • What is the correct syntax for using a variable in an ad hoc query?

    Hi all
    I am an occasional DB user and at the moment need to update about 1000+ records so that a certain column gets a unique value.
    So I thought that I would use a variable for this.
    I then built this kind of SQL statement for just a small subset of the records:
    variable recNumber number;
    exec :recNumber := 1;
    UPDATE TABLE_TO_BE_UPD
    SET COL_TO_BE_UPD = COL_TO_BE_UPD + recNumber
    WHERE COL_TO_BE_UPD IN ('VAL_A','VAL_B');
    I get the invalid SQL statement error when attempting to execute above (besides the prompt that asks for a value which I would like to omit).
    Anyway I also tried this one:
    CREATE SEQUENCE seqCounter;
    UPDATE TABLE_TO_BE_UPD
    SET COL_TO_BE_UPD = COL_TO_BE_UPD + seqCounter.NEXTVAL
    WHERE COL_TO_BE_UPD IN ('VAL_A','VAL_B');
    From this one I got the error ORA-01722: invalid number...I am guessing this comes because seqCounter is of type number and the COL_TO_BE_UPD is of type character...(?)
    So what I would like to ask is what is the correct way to define and use a counter type of variable to append a number at the end of a character string?
    Also another question that I would like to ask is that are variables that are used in ad hoc queries also called 'bind variables'?
    Thanks muchly

    If you want to append a unique number to a column then this would do it:
    UPDATE TABLE_TO_BE_UPD
    SET COL_TO_BE_UPD = COL_TO_BE_UPD ||to_char(rownum)
    WHERE COL_TO_BE_UPD IN ('VAL_A','VAL_B');

  • What is the correct procedure for upgrading to aperture 3.4

    I am working in South Sudan and am shortly going to be in a place where I can download all the updates. The last time I did an update was around 2 weeks ago.
    I presume that there will be updates for Mountain Lion, iPhoto and Aperture, plus a whole pile of iOS updates. From the support questions I see that there is a number of people having problems.
    I presume that the first thing to do will be to rebuild the library of aperture.
    What is the correct procedure after that?

    If I do an upgrade through AppStore, and find it does not work, do I uninstall first by removing to trash? What do you mean by revert to an earlier version, and which previous version of Aperture should I use.
    Neville,
    So you did buy Aperture from the AppStore?
    Then move the Aperture application to the Trash, but do not empty it, just in case
    Sign into the AppStore and reinstall. In this case you do not need to revert to an earlier version. If the AppStore installer does not find an Aperture in your Applications folder, it will have to make a full install, and no incompatible frameworks should remain, as is the problem with the partial upgrades right now.
    Yes, I have a bootable clone,
    And have you checked, if you really can boot from your clone? Just being very cautious.
    Do you use facebook? Some posters are having problems, even after reinstalling, if the want to publish to Facebook. Post back, if you encounter that problem.
    Good Luck
    Léonie

Maybe you are looking for