Help! I can't open Itunes nor read my music! I had an accident!

I accidentally displaced my music files from from Itunes Library to the other hard drive disk called DATA while reading Itunes at the same time. Suddenly, all my music was locked and I couldn't listen to it. I put the files back in their original place, but everything was messy. As a result, I can no longer open Itunes nor can I read my music. All I get is : "The file Itunes library.itl is locked, it is on a locked disk or you don't have any authorization for this file". What can I do? Please help me! I can't live without my music!
I must read my music. I tried upgrading the latest version of Itunes but it still doesn't work! I need quick solutions, my Ipod has to be loaded very soon! Thanks

Anyone can help?
Without uploading the old files to my new phone, i can't use my 4S...

Similar Messages

  • I have an ipod and latly I can't open iTunes store and download music when I push that icon it only shows an 10.0 upgrade i ve upgraded and woun't me bypass and get songs. what do I do?

    I have an ipod and latly I can't open iTunes store and download music when I push that icon it only shows an 10.0 upgrade i<ve upgraded and woun't me bypass and get songs. what do I do?

    I didn't realize I had to delete everything and sync again.  WHEW!  Thank you so much.  That worked.

  • I need help! can't open iTunes on this new soft ware!

    need help! iTunes is not opening after i installed this new soft ware!

    zulfiqarfromlongmeadow wrote:
    iTunes is not opening after i installed this new soft ware!
    ... and what software might that be?

  • I can not open iTunes. It started when an upgrade appeared. Now I get this message when I try to open itunes. can not find MSVCR80.dll     Then I get ERROR 7 (windows error 126)   I tried reinstalling iTunes but that did not help. Please Help Me!

    I can not open itunes on my computer. It started when an upgrade appeared. Now I get a message that states This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I tried to reinsall the application but it did not help. I also get a message iTunes was not installed correctly. Please reinstall iTunes   Error 7 (Windows error 126)   Please Help me!

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99623)

  • I can't open iTunes message says" can't read itunes library.itl because it was created with a newer version"

    I can't open iTunes message says" can't read itunes library.itl because it was created with a newer version"  thank you for any help!

    My ipod did that all day yesterday then went into lockdown ! now the dam thing wont do anything !!!! its stuck in download mode!!!!!!!!!

  • TS1717 I can't open Itunes, I have an error that says says MSVCR80.dll is not found. I have tried twice to uninstall and reinstall but keep getting the same error message. Can anyone help?

    I can't open ITunes, I have an error message that says MSVCR80.dll is not found. Is anyone able to help solve this issue for me. I have tried to unistall and reinstall ITunes twice but continue to get the same error message.

    A msi file is short for microsoft installer.  It normally is for installation, removal, and maintenance for a program. So iTunes.msi would be used for the updating of the program.  For some reason it isnt finding this so we can't update, install, or remove it.
    From what I have seen windows installer cleanup utility solved related problems before. 
    I found this forum about removing and installing a new iTunes.  It was about someone who was trying to isntall iTunes, and was looking for msi file and asked for help.   Using this should allow you to be able to install iTunes.  It won't give you the msi file but will allow you to isntall iTunes over again.
    This was what was said.
    Another option in case you can't get an msi. (Or even if you can ... the msi's mentioned in the messages may be damaged rather than missing.)
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
    Restart the PC, and try another iTunes install. Does it go through properly this time?

  • Can't open iTunes. Get this msg: "The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file." HELP!

    Can't open iTunes. Get this msg: "The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file." HELP!

    go to the directory where the itunes librairy is stored (google search!). Select the file hit "command+i" on your keyboard or control click on the file and select get info. there is an option to either lock or ulock the file. unlock it. restart your computer and see if it works.

  • Using Macbook(2008),Lion10.7.4,can't open itunes 10.6..HELP!

    Using Macbook(2008),Lion10.7.4,itunes 10.6.3,the latest version.Since i accept system upgrade last week(the upgrade package includs related itunes upgrade), Itunes goes dead every time! I suppose it's the auto podcast update that kills it... how can i open itunes to close the auto download and Genius function...Or except reinstall itunes, other options? cuz uninstalling itunes is really a pain in the... arse... So, could anyone help me ??? I tried changing my memory bar from 3G to 4G, and holding opt+Cmd+P+R to reset PMV(not sure remember it...)something but all in vain... Itunes still stuck in the first place as the following shows.... What shall i do???!!! i'm really frustrated.

    I'm using Windows 7.
    Do you have a 64-bit or 32-bit version of Windows 7, che?

  • I tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?

    i tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?

    Hello bajura007,
    Thank you for the details of the issue you are experiencing with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
    You can find the full article here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • All of a sudden I'm getting a 'itunes.exe - system error  It says the program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem.  I have tried to reinstall and still can't open itunes.  help!

    all of a sudden I'm getting a 'itunes.exe - system error  It says the program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem.  I have tried to reinstall and still can't open itunes.  help!

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • "The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

    "The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

    this just started w/ me yesterday.  I was running 10.5.3, and nothing changed - the message just appeard out of nowhere.  I update to the latest iTunes 10.6 but the message is the same.
    Sounds like probably some sort of Library file corruption.
    The two options available in the message box are "Download" and "Quit".  Download is useless because I'm already running the latest.  Quit is pretty useless.
    I was going to just create a new Library and re-import all my music.  Of course, all my iPhone sync settings are going go have to be recreated.

  • I keep getting the following message:  Runtime Error...Microsoft Visual C + Runtime Library  Program C:\Program Files\iTunes\iTunes.exe  R6034 An application has made an attempt to load the C runtime library incorrectly and can't open iTunes now.  Help!!

    I keep getting the following message:
    Runtime Error...Microsoft Visual C++   Runtime Library  Program C:\Program Files\iTunes\iTunes.exe
    R6034 An application has made an attempt to load the C runtime library incorrectly and can't open iTunes now.
    Please could someone help with this query as I am at a loss as to why this problem is now occurring?  Thank you.

    Check the user tip below.
    https://discussions.apple.com/docs/DOC-6562

  • Can anyone help me - when I open itunes for some reason TV shows does not appear anymore?

    Can anyone help me - when I open itunes for some reason TV shows no longer appears?

    Go to iTunes prefs>General - make sure the box is ticked for TV Shows.
    MJ

  • Can't open iTunes! help!

    Can't open iTunes. tried deleting & reinstalling iTunes
    message comes up:
    The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.
    Then the message reads: itunes was not installed correctly. please reinstall itunes: error 7 windows error 127

    The installation is broken. Remove each and every trace of iTunes and other apple software and utilities from the computer and try the re-installation.
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    The steps above will ensure that all components of iTunes are removed from the computer. Once this is done, you can reinstall the software.

  • Can't open iTunes on my computer. All collapsed, rebouting doesn't help.

    Can't open iTunes on my computer. All collapsed, rebouting doesn't help.

    Try removing iTunes, Apple Application Support, and the related Apple software using Control Panel. For a walkthough on the process, check out this Apple document -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Then try downloading and reinstalling the latest version of iTunes from here -> Apple - iTunes - Download iTunes Now

Maybe you are looking for

  • Cannot a get JSP page instance from a page being destroyed

    We have a J2EE app, using Struts + Tiles (build 1.1-b3), running on Win2KPro, Ora9ias v9.0.3. The application is roles-based, and different users see different versions of the same page based on their role authorizations. Occasionally, when multiple

  • Down payment for leased assets

    Dear Friends, I am unable to create Advance payment request for Capital Goods using F- 47 Transation code. Whether we can post down payment or not? Pls suggest Ragards Babu

  • How to do a Get-ADGroup and pass SamAccountName with spaces

    Hi, I read a text file of groups in SamAccountName form into a variable, then do a Get-ADgroup to ensure they are in a specific SearchBase, then I want to delete them if found in the Searchbase.  Problem is the SamAccountNames have spaces in them and

  • Failure writing file and Failure sending mail: The user or group name is not recognized.Mail will not be resent.

    Dear All, I am using MSSQL SSRS 2008.  All the reports run properly when viewed via a web browser. However for subscription, I am having a strange experience.  The subscription having intermitten failure. I need to execute multiple times to get it wo

  • Classic scenario: po is not created

    hai , i am using classic scenario.In define backend objects configuration i made the following settings product category       purchasing group      internal procurement       external procurement 555                              555