Help, i have a silly question i know ur gonna laugh
hi
i know this is a silly question but i have a ipod and i was wondering if there was software that could be downloaded so that u can watch videos if u dont have an ipod which has that facility
thanks
If you don't have an iPod video, you won't be able to watch videos.
iPodLinux does exist; however, it is only supported on 1st, 2nd & 3rd generation iPods (the non-clickwheel models) and does not enable videos
If you want to check it out, vist www.ipodlinux.org.
Similar Messages
-
Silly Question I know but......
Silly Question I know but does anybody know how to transfer the message tone 6 acc from my N95 to my N96?
I can think of how to do it?
Thanks GuysUnfortunately, all preinstalled Nokia tones are copyright and cannot be transferred.
-
Help, I have a charging question!
Sorry this may be a silly question, but I really don't want to kill my iPod inadvertently. I plugged my iPod into a PC that does not have iTunes on it, i thought it would just charge it. It is flashing do not disconnect at me and there is a little horizontal plug in the battery icon in the upper right corner. is this normal? is my iPod just charging right now?
Hi Margaret.
See if this helps;
http://docs.info.apple.com/article.html?artnum=60970
Cheers!
-Bryan -
Silly Question I know but I'm a Newbie!
Besides Apple's own mail can the iPhone run any other email software e.g. thunderbird, etc.?
MarkI'm worried that when I collect emails on my iPhone she wont be able to collect those (same) emails via her powerbook (as I will already have collected them). My thought was; if I could use say Thunderbird on my iPhone and collect mail she would be able to collect the same mail via Apple's mail on her powerbook.
That's not how collecting mail works, really. The email client doesn't matter *at all*--it depends on whether the account is POP or IMAP and what settings are in use.
I have a POP account that is set up to download messages and then leave them on the server (this requires setting the POP settings in both Mail desktop and Mail iPhone that way). So all my messages get downloaded both in Mail and on my phone as new, unread, messages.
A POP account set to delete from server after downloading would cause the problem you cite. An IMAP account would download the messages everywhere, but would mark the ones you had already read as Read when your wife downloaded them, and if your wife deleted a message that wasn't for her, it would also get deleted for you.
Google POP vs IMAP for more, and see what your email provider offers, and check the settings.
Not such a silly question---it's a bit complicated. -
Apple have no support or contact for forgetting password.
I can not purchase any apps even though I have purchased grime this device before,
Please help!!!!From a Kappy post
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
Need help ASAP, have a tough question about CPU and BIOS...
Alrighty guys... I'm not super smart when it comes to BIOS and the nitty gritty computer stuff, but I know my way around. Here's the thing...
This is the desktop I have:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=...
It's sorta old, but it gets the job done quickly. I had an issue with it some time ago and I thought it was the power supply, so I replaced it. While I was waiting for the power supply to arrive, I took the CPU out, just to be nosey. I accidentally bent a couple of the prongs, so I had to get a new one.
First, I bought a Black Edition AMD quad core, but the 125W was too high for my 95W chip. I had to sell it. I sold that and I just bought a new one:
http://www.cpu-world.com/CPUs/K10/AMD-Phenom%20X4%209850%20-%20HD9850XAJ4BGH%20(HD9850XAGHBOX).html
I put it in the computer, boot it up and it goes to the HP boot screen and then goes to a black screen stating that the CPU is not compatible and that it's going to shut down. When I reset it and try to press F10 or any of the keys it states that it's going to go to that screen, but then just goes to the black CPU shutdown screen again. There is one thing that the computer will do though. When I press F2 when it's in the black shutdown screen, it will SOMETIMES load the two HDD's that I have. It's just really weird. One time I got it to go to a HP diagnosis page. It showed the CPU and had a big green check next to it. It checked the memory too, and it got a check. Then it just froze and I had to shut it down. I can't seem to get it to that screen again.
My real question is why won't it recognize that my CPU is compatible? Do I need to update my BIOS? Can I do that without a CPU and a running OS? I really don't feel like selling this processor. I know that I should have just gotten the exact same processor model that came out of it.
Any info will be nice! Thanks so much!!Here are the specs for your HP Pavilion a6720y Desktop Computer and it's M2N78-LA (Violet) motherboard. According to the specs, your computer supports the following CPUs;
Socket type: AM2/AM2+
TDP: 95 watts
AMD Athlon X2 (Bt)
AMD Athlon 64 X2 up to 6000+ (W)
AMD Phenom Triple-Core up to 8xxx (AM2+) (Toliman)
AMD Phenom Quad-Core 9xxx series (AM2+) up to 9850 (Agena)
Based on the CPU part number supplied, you purchased another 125 watt CPU. The AMD Phenom X4 9850 (HD9850XAGHBOX) isn't going to work because it is rated at 125 watts and therefore is not compatible with your motherboard. Please consider returning (as Dave suggests) or selling your current CPU and getting one of these 95 watt AMD Phenom X4 CPUs.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
I need help, I have alot of questions too (swing, code, optimizing...)
Hi, I'm having a little trouble with aligning my GUI correctly. Here are screenshots from my laptop which runs OS 10.4 & my PC running Windows 2000:
http://kavon89.googlepages.com/clipper.png <= On the laptop
http://kavon89.googlepages.com/clipper_windows2000.jpg <= On the PC
I don't know why the OS 10.4 looks almost perfect and the win 2k is a disaster. I played with it on my laptop and once i came over to my PC to post a problem about somthing else, i noticed this issue on my windows box. My guess is that either the JButton on OS 10.4 is smaller than the one for win2k and causing the automatic organizing to malfunction... or maybe the pixels are larger on my PC then on my laptop.
I was thinking that I should make diffrent .jar's for each OS since there are GUI issues.... or is there a way to make it universal? (i read somwhere about GridBag?)
Next off, Is there any way to reduce the size of the space between the JList box closest to the top of the frame & the buttons & text box below it? I tried all sorts of resizing and it seems stuck on some sort of space there which i would like to make compact.
Those are all the swing questions i have ^
About my code:
I recently added 2 buttons which are at the bottom of the OS 10.4 screenshot, Clear Box & Drop All. Clear Box is the one I made work, or so I thuoght. I wrote this for my Clear Box button (by the way, the button is sapose to just clear the text box directly to the upper left of itself.)
if(e.getSource() == buttonc)
textfield.setText("");
}I thought that was the best way to go about clearing the text box. just setting it to blank. But after some testing to ensure there were no reprocussions, I found a problem... When i select somthing from my JList and hit Clear Box, it deletes the entry in the JList when it is not sapose to. It also does it when there is text in the textbox and i have selected somthing in my JList. I haven't been able to figure out why. Here is my full source code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class winclipstart
JButton buttona, buttond, buttonc, buttonda;
DefaultListModel clippedtxt = new DefaultListModel();
JTextArea textfield;
JList ClippedLines;
public static void main(String[] cheese){new winclipstart().buildGUI();}
public void buildGUI()
JFrame frame;
Container contentPane;
JPanel Bottom = new JPanel();
JPanel Top = new JPanel();
frame = new JFrame();
frame.setTitle("Clipper 0.1 Beta");
contentPane = frame.getContentPane();
ClippedLines = new JList(clippedtxt);
JScrollPane scroll2 = new JScrollPane(ClippedLines, JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED, JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED);
scroll2.setPreferredSize(new Dimension(400,150));
textfield = new JTextArea(3,20);
JScrollPane scroll1 = new JScrollPane(textfield, JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED, JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
buttona = new JButton("Clip");
buttond = new JButton("Drop");
buttonc = new JButton("Clear Box");
buttonda = new JButton("Drop All");
Bottom.add(scroll1);
Bottom.add(buttona);
Bottom.add(buttond);
Bottom.add(buttonc);
Bottom.add(buttonda);
Top.add(scroll2);
Box All = Box.createVerticalBox();
All.add(Top);
All.add(Box.createVerticalStrut(5));
All.add(Bottom);
contentPane.add(All);
buttonL cl = new buttonL();
buttona.addActionListener(cl);
buttond.addActionListener(cl);
buttonc.addActionListener(cl);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setResizable(false);
frame.setLocationRelativeTo(null);
frame.setVisible(true);
frame.setSize(424,314);
ClippedLines.setDragEnabled(true);
public class buttonL implements ActionListener
public void actionPerformed(ActionEvent e)
if(e.getSource() == buttona)
String elementToAdd = textfield.getText();
if(elementToAdd.equals("")==false) clippedtxt.addElement(textfield.getText());
else
int index = ClippedLines.getSelectedIndex();
if(index > -1) clippedtxt.remove(index);
if(e.getSource() == buttonc)
textfield.setText("");
}There is a stray dragenabled true line in there which on my ibook showed that it drags after holding the mouse button down a little longer than expected, and it shows im dragging , but obiously not dropping because i haven't configured dropping yet. but on my windows machine it shows nothing of it. oh and, on the ibook it shows it with a green "+" and then makes it look like im trying to put it inbetween two other lines but does nothing when dropped like expected
Another question: In the beginning of my code i have it loading the entire library with the *, and i noticed after turning it into a .jar that it loads slower than i expected... would a way to speed it up be to specify exactly what i need loaded after the program is finished or would it make no diffrence?
:-/ seems my program isn't as cross platform as i exptected java to beI solved the code problem myself after a careful run through of the code, the "else" in my subclass made it so that every button other than the Add button deleted a selected entry, i quickly fixed it and made it an if statement.
Thank you for the link cotton.m
My question bout optimizing still remains though:In the beginning of my code i have it loading the entire library with the *, and i noticed after turning it into a .jar that it loads slower than i expected... would a way to speed it up be to specify exactly what i need loaded after the program is finished or would it make no diffrence? -
Help i have a good question??!?!?!?
When I go on the internet and try to view videos, it plays like the video is in slow motion, makin those sloooowwwweeedd doooowwwwnnn wwoooorrrddss!! Its annoying!! What can I do????
If you have too many apps running in the background that your not using may cause your phone to slow down and also software. I recommend removing apps your not using or either using the "Force Stop" option for apps that you want to stop running. You can also clear your cache to insure your internet browser and history is clear. I will list steps below:
To uninstall applications. (Just as a note, you can not uninstall preloaded apps)
From the home screen, touch the applications tab (located in the lower-left).
Touch Settings.
Touch Applications.
Touch Manage applications.
Touch the application.
Touch Uninstall.
Touch OK.
Touch OK.
To stop an application from running:
From the home screen, touch the applications tab (located in the lower-left).
Touch Settings.
Touch Applications.
Touch Running services.
Touch a service / Application.
Touch Stop.
To Clear Cache/temporary internet files:
From the home screen, touch the applications tab (located in the lower-left).
Touch Internet.
Touch Menu.
Touch More.
Touch Settings.
Touch Clear cache.
Visited website content stored on the device. The cache enables the browser to download only the content that has changed since the last time a website was visited. Since the browser only downloads changed content, pages are loaded faster.
Touch OK.
Touch Clear history.
A listing of URLs (website addresses) that have been recently visited.
Touch OK.
Touch Clear all cookie data.
Cookies are used to store information that helps personalize the Web browsing experience. Cookies may contain information including: website preferences, login settings, shopping cart contents and more.
Touch OK.
Lastly, the software version that should be on your phone is Version: 2.15.00.07.28
To check your software you can use the steps below:
1.Click Applications
2. Click Settings
3. Click About phone -
Simple Silly Question I know I'm overlooking
Ok,
and pardon in advance for the "d'oh!" moment.
But, when creating my site in iWeb, and pubishing to a folder,
it names the folder the name of the site.
Thus the page URLs within the pages reference:
http://www.nameofsite.com/nameofsite/podcast/index.html
However, for my Name forwarding to work for my domain name
it needs to be:
http://www.nameofsite.com/podcast/index.html
So, I know I can take the pages into BBEdit and do a grep
search and replace and fix this, but what am I missing
in iWeb, so that when I publish to the folder, that
second "nameofsite" isn't in my URL tags?
or is it attaching that not in publish to folder,
but some other setting?
Thanks in advance...I know this is a simple fix...its linking to the
rss
feeds and itunes feeds that is the main problem.
That's because those links are created based on the
standard iWeb site structure. Is there some reason
why you don't want to use that, and thereby avoid the
need for constant post processing?
My main reason is to get my feed validated.
Using the default iWeb way is returning either "404"
file not found errors in Feedvalidator, or it's not digging
deep enough and having a resolve issue of the domain masking.
If I post edit, and shorten the RSS feed link to
http://www.nameofsite.com/Podcast/rss.xml,
and upload it by moving the contents up, and not
the whole folder,as is the default,
feedvalidator.org finds the rss.xml
fine, and reports validity.
so I know the SIMPLER method of uploading the files is just :
drop the folder as is into my cox space
change my fowaring/mask to the "nameofsite" folder
BUT
my it affects my rss link and itunes (itpc) link this way,
in that they come back "404" and 'not valid link'.
Because it doesn't forward/mask properly when it comes to
rss.xml. -
Please can someone help, I have a question in my coursework that I don't know the answer to! Explain how PostScript fits into the design process?
The simple answer is that today PostScript really doesn't fit at all into the Graphic Design process, at least in terms of what the graphic designer needs to know.
Historically, though, the PostScript imaging model, first introduced circa 1984 provided the basis for the initial publishing software including PageMaker, Illustrator, QuarkXPress, and even Ventura Publisher. This imaging model included support for continuously scalable text, vector, and raster imagery as well as the concepts of a current transformation matrix that allowed arbitrary scaling, rotation, etc. and multiple color spaces (grayscale, RGB, CMYK, spot, device independent, and color-managed).
The PostScript imaging model was effectively replaced by the PDF imaging model, a significant superset of the PostScript imaging model, by the time Illustrator 9 and InDesign 2 were released in terms of support of ICC color management, transparency, etc.
The fact is that a good graphic designed doesn't need to know anything about PostScript or PDF per sé, but rather about the basics of color (such as issues associated with color gamut and what how that affects display and printing), use of text versus vector versus raster images and why one should keep content at the highest level of abstraction all the way to the rendering (or screen) or RIP process for printing. Some knowledge of typography also helps.
- Dov -
i have two security questions but i don't have a rescue email address and i know my apple id and password, what should i do please help me!!:(
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
Silly question but have to know
Hi people
This is a real noobie question I know but have a good reason for asking ???-)Is there any connection between the northbridge temps and cpu temps? In other words, does one have any effect on the other
I promise my next question will be more intelligentCheers Wonkanoby for reply I think im suffering the dreaded northbridge fan bearing collapse . Going to take board back to supplier as it is only a month old and sounds like a cement mixer. Always noticed that this board ran hotter than last hence first question
-
Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from Sep 2007 it came preloaded with tiger. I have original install (2) tiger discs version 10.4.10. I want to know if it is safe and what are the necessary steps to do so. Also by downgrading im wondering if a lot of apps nowadays support tiger for example I have photoshop version 5 and 4 these are very important to me. One last question does anyone know of any reliable virus protection for mac that doesnt slow down your computer? because I have read that a lot of them do so. If anyone can help me I would greatly appreciate it! Here are the specs for my iMac
Model Name:
iMac
Model Identifier:
iMac7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
4 MB
Memory:
2 GB
Bus Speed:
800 MHzMost of the time a perception of general slow performance is the result of installing third party junk alleged to speed up, "clean" or "optimize" your Mac, or to look for viruses that don't exist. Ideally you would know what you installed so you can uninstall it, but if you don't know or aren't sure there are techniques such as Safe Mode and creating a temporary user account to confirm that suspicion.
If you open Activity Monitor it may show a process, or processes, that occupy a lot of your system's time.
Slowness confined solely to web browser activity is often the result of an inexorable progress toward websites that demand ever more processor-intensive tasks. If your slow performance is strictly limited to web browsing, you might try disabling Flash by either uninstalling it, or use utilities such as ClickToFlash that allow you to control what Flash content gets loaded. Flash in itself is not inherently evil, but there is nothing to stop websites or the advertisers who pay for them from writing horrible Flash code that can do everything from hogging 100% of your CPU's time to causing random crashes. You can watch Activity Monitor as in the above to correlate these troublesome web pages with performance degradation.
You are correct; if your computer shipped with Tiger you may certainly revert to it. I forgot that Tiger was shipping on new Macs as recently as five years ago. To downgrade it would be necessary to completely erase your hard disk and boot with the Tiger installation DVD, followed by installing it anew. Such drastic measures are not necessary and you are unlikely to be satisfied with the results anyway.
Assuming your system is free of third party parasitic junk attached to OS X in an ill-conceived attempt to improve upon it, that your hard disk drive is sound and the boot volume has enough free space to work with, by far the best performance-enhancing improvement would be to add more memory. Buy as much as your computer can use and that you can afford. 2 GB is not that much any more.
Read the following for some recommended troubleshooting techniques from Apple:
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode? -
i really need help on reseting my security questions i tried sending in my rescue email but the rescue email is not showing up on the password and security tab and i'm positive i don't know the answers this is really getting annoying
If your rescue email is not working and you cannot remember even one answer, then you only have one option - call Apple.
http://support.apple.com/kb/HT5665 -
Data values """""""""""""silly question """""but i need to know
hi,
When we load the data in essbase
like
jan 2009 sales 700(700= data values)
2009 goes to year
Jan goes to period
sale = account
where does 700 go and sit in essbaseBased on your original post, I think you may be thinking of Essbase as more similar to relational storage than it really is.
For example, you say: '2009 goes to year'. In a relational database, this makes sense. You might have a table with the fields 'Year', 'Period', 'Account' and 'Value'. When you load the particular piece of fact data in your example, '2009' sits in the 'Year' field. In a multidimensional cube, all intersections (combinations of one member from each dimension) are potential data storage locations. A cube doesn't store '2009' in 'Year' - it stores +700+ in '2009'! Thanks to your metadata - the outline - '2009' already exists as a potential data storage location before you load any data.
The Essbase Database Administrator's Guide has a section titled 'Understanding Multidimensional Databases' which may help.
Of course, if you already know all this and you're simply asking about where the data values are physically stored in the Essbase cube implementation, then I think Srinivas has answered your question - for a BSO cube it's in the .pag files under /app/appname/dbname/.
Maybe you are looking for
-
How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8) since November until now. Mail will
-
Getting "There are no speakers connected to the AirPlay device " device-name "
For the past several years, I have had a stereo receiver hooked up to and airport express to stream music wirelessly from my iMac to stereo speakers. All of a sudden, I started getting the message "There are no speakers connected to the AirPlay devi
-
Iphoto thumbnails disappear with each reboot
My iPhoto thumbnails disappear any time I reboot or log out of iPhoto. I use the rebuild command and get them back, but they don't stay. Is this a problem with iPhoto or the address where the thumbnails are stored?
-
Can I read download Adobe light room and enter my serial code that way? And if so where can I download the program thank you in advance
-
Read Business Partner of an OrgUnit
Hi all, does anybody know a function module to read the assigned business partner number to an organisation? That means, you have the org number, like O 5000*25 and you would like to know the business partner number, which you can see in ppoma_crm, w