Help-I Need to hold a Abstract button pressed

hi,
I have captured a button instance from abbot. I need to hold the button pressed for 2 seconds without releasing.
I need to know, how to do it?
Pressing the button for more than 2 seconds without releasing will popup a menu.. i need to get the instance of the menu too...
How can i do that, either through Java or with Abbot.
Thanks,
With Regards,
Priyaa.

what the heck is Abbot?I thought everyone knew about [url http://www.jahozafat.com/TV_Shows/Abbott_And_Costello/hey_abbott.wav]Abbot.

Similar Messages

Macbook wont powerup, beeps repeatedly when power button is pressed and you need to hold the power button down to shut the beeping off. any thoughts?

Have a 13" macbook. wont power up. upon hitting power button, the computer sounds 3 long beeps constantly until you hold the power button down for 5-10 seconds. any thoughts out there?

Thanks guys, i just read a few articles regarding this. i pulled all the ram and tried swapping and reseating ram. it appears both chipsets are fine but one ram slot is bad. computer will boot with either chipset installed in the one good slot but neither chipset will boot in the other slot. bummer....

WHEN BUTTON PRESSED TRIGGER

Hi,
I've created a form with 4 data blocks (each of which has its' own canvas, items, and window). On my first canvas, I've created "push buttons" for the user to select which canvas (block/window) they go to next. I've attached WHEN-BUTTON-PRESSED triggers to each of these buttons (which execute a go_block command), however, when I first run the form and click on a button, nothing happens. If I execute a query BEFORE I click on a button, they all work fine and take me to the correct canvas. Could someone please tell me how I can get these buttons to work WITHOUT having to execute a query first? I've looked at all the property palettes, etc. and can't see any attribute that I can set.....any help would be greatly appreciated. Thank you. (I'm using Forms 9.0.4.0.19)

Thank you so much for your responses. I had changed the
Fire In Enter-Query Mode to No, but that didn't help, however, changing the trigger from WHEN-BUTTON-PRESSED to WHEN-MOUSE-CLICK did the trick - it works fine.
Can you suggest a good reference for determining which type of trigger you should use?
Thanks again for your responses - I really appreciate it!

My ipod touch 4gen will turn on but i have to hold the power button. how do i hix it i need help! ASAP

I CAN TURN MY IPOD ON BUT I HAVE TO HOLD THE POWER BUTTON OR IT WILL TURN OFF IT HAS BEEN LIKE THIS FOR ABOUT A WEEK OR TWO AND IT IS REALLY ANOYING. PLEASE HELP ASAP!!!!!!!!!!!!!!!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I keep getting an error message that my computer needs to be shut down. It is like a dark screen comes down and I have to hold the on button until it shuts down. Why is this happening?

I keep getting an error message that my cmputer needs to be shut down. A dark screen comes down and it says to restart. I have to hold the ON button until the computer shuts down. Then I can restart and it says it is sending a report to Apple. This seens to be happening a lot lately. Has anyone else had this problem?

Hi Carol...
error message that my computer needs to be shut down. It is like a dark screen comes down
That is referred to as a kernel panic.
Help here > Tutorial: Avoiding and eliminating Kernel panics | MacFixIt - CNETReviews

Phone was working three minutes ago, not it is completely black. When I put the charger on it, it does nothing. I can't see anything. Ive tried to hit the on off button, nothing, holding down the button on the bottom does nothing. Help please

phone was working three minutes ago, not it is completely black. When I put the charger on it, it does nothing. I can't see anything. Ive tried to hit the on off button, nothing, holding down the button on the bottom does nothing. Help please

First you can try to force reboot your phone. To do this:
1. Hold down the sleep/wake button and home button simultaneously.
2. Let go when the Apple logo appears and the iPhone is booting up.
If that doesn't work, you might need to hook the phone up to your computer and do a full restore through iTunes.

After a few minutes on safari it freezes everything i can't even force quit i have to shut off by holding the power button down please help me with this. thanks

everything freezes i can't even force quit i have to shut off by holding the power button down please help me with this. thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Ipod touch won't turn on, tried holding the 2 buttons and still nothing help!

I need help in getting my ipod touch to turn on. I tried holding the 2 buttons and it wont turn on.

I would put it into a recovery mode to fix it. Try these steps:
1. Unplug the touch from your computer
2. Hold the Sleep/Wake switch until you see the red slider and turn the iPod off. (Note: this may not work and if it doesn't go to the next step.)
3. Start iTunes
4. Hold down the Home button and continue to hold it down while you plug your touch back into your computer.
5. Continue holding it down until iTunes gives you a - "device detected in recovery mode" message.
6. Follow the onscreen instructions to restore your iPod.

My IPhone 5S turned itself off and will not turn back on even when I hold the home button and the on button. What do I need to do?

My IPhone 5s turned itself off and will not turn back on even when I hold the home button and the sleep button. What do I need to do?

Me, I would call apple Help..it's a new iPhone..

Everytime I start up my Mac mini I'll be able to use it only for a little while then the beach ball appears and it won't let me do anything I have to keep forcing it to turn off by holding the power button can someone help me?

I have no external devices connected to my Mac mini but still everytime I use it after about half hour to an hour in whatever I'm using wether it's the Internet or iPhoto or iTunes the beach ball appears and I cannot get it to stop I always have to press and hold the power button and force it to switch off I then do a safe reboot and it starts up again fine but same thing again after a certain amount of time it will freeze. I have also had on some occasions a bright white screen with a folder and a flashing question mark appear but it's not because of any external devices as they have all been removed please can someone help me as I have no idea why this keeps happening to my computer and I'm worried that there's something seriously wrong it's only about 6 months old and I have no experience in dealing with computers ??

EtreCheck version: 2.1.8 (121)
Report generated 13 February 2015 15:33:46 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    Mac mini (Late 2012) (Technical Specifications)
    Mac mini - model: Macmini6,1
    1 2.5 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    Intel HD Graphics 4000
        LG TV spdisplays_1080p
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 0:11:35
Disk Information: ℹ️
    APPLE HDD ST500LM012 disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 499.25 GB (398.54 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Configuration files: ℹ️
    /etc/sysctl.conf - Exists
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/AVG AntiVirus.app
    [loaded]    com.avg.Antivirus.OnAccess.kext (2015.0 - SDK 10.8) [Click for support]
Launch Agents: ℹ️
    [running]    com.avg.Antivirus.gui.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.avg.Antivirus.infosd.plist [Click for support]
    [running]    com.avg.Antivirus.services.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         5%    WindowServer
         1%    AVG
         0%    AppleSpell
         0%    fontd
         0%    cloudpaird
Top Processes by Memory: ℹ️
    215 MB    com.apple.WebKit.WebContent
    125 MB    avgd
    107 MB    Safari
    90 MB    Messages
    69 MB    WindowServer
Virtual Memory Information: ℹ️
    171 MB    Free RAM
    1.68 GB    Active RAM
    1.53 GB    Inactive RAM
    637 MB    Wired RAM
    1.34 GB    Page-ins
    2 MB    Page-outs
Diagnostics Information: ℹ️
    Feb 13, 2015, 03:20:28 PM    Self test - passed
    Feb 6, 2015, 08:08:07 PM    /Library/Logs/DiagnosticReports/Kernel_2015-02-06-200807_[redacted].panic [Click for details]

My MacBook Pro 13in Mid-2010 won't start unless I hold the power button for about 10 seconds! Help Please!

Hello.
I have a MacBook Pro 13-inch (mid-2010):
Processor: 2.66GHz Intel Core 2 Duo
Memory: 4GB 1067 Mhz DDR3
Running Mac OS X 10.7.2
Yesterday I opened my computer (was sleeping as usual) and the screen just flasehed white and the computer powered off. The magnetic electricity thingy was connected and was green, so it was fully charged, and connected to the electricity.
Since it powered off, I tried turning it on again, and again, one second after starting to boot up, screen flashed white and the computer powered off.
I read somewhere I should hold down the power button longer, so I did, and it booted up. That's why I am able to write this. But every time I turn it off or put it to sleep, it does the same thing when I boot up.
If I don't hold the power button for 10 seconds or so, the computer won't work.
Then today, I did a backup of my entie hard drive, just in case. Later, I started using Excel, and about 1 hour after I was on it, suddenly it got really slow. Like I would click on a program like Safari, and it would take over 30-45 secs to start and be ready. And my computer is usually really fast!
I went on the Internet again, started in safe mode, boot up with option+command+P+R to reset PRAM, and nothing worked. Then suddenly on one turn-off/turn-on (since I can't restart because the computer only starts if I hold the power button for 10 seconds), again it is working at normal speed.
What can this be? Any ideas?
I really appreciate your time and help in advance
Gaby

GabyBA wrote:
I forgot to say I had already tried that as well. Just in case, I just tried it again and there was no change :S
Are you running the Apple-supplied RAM? Have you run Apple Hardware Test? I don't know what else you've tried, but this may be time to do a fresh install of Lion if you have not done so since installing Lion.

Im having problems with my iPod Touch 2nd gen. It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button Help?

It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes. I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge. Help?

When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes. I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge. Help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have a new Ipad and when I try to buy an app it asks for my questions! I dont remember them so I press the button that send me an email to reset them. Ive sent it various times but it doesnt arrive. please help I need this app for school!!!

I have a new Ipad and when I try to buy an app it asks for my questions! I dont remember them so I press the button that send me an email to reset them. Ive sent it various times but it doesnt arrive. please help I need this app for school!!!

See Kappy's great User Tips.
See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities https://discussions.apple.com/docs/DOC-4551
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us http://www.apple.com/emea/support/itunes/contact.html
Call Apple Support in your country: Customer Service: Contacting Apple for support and service http://support.apple.com/kb/HE57
 Cheers, Tom

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

Sorry i mistakenly made this question. It was alright. No Problem At ALL

Help-I Need to hold a Abstract button pressed

Similar Messages

Maybe you are looking for