Help in certifiation
hi friends ,
i'm intereted in certification in scm any one can give me how to prepare for certification , question pattern & set of question paper if any one have .
mail id. :- [email protected] , [email protected]
waiting for reply asap
thanks
lakshmsn
Hi,
Mail has sent ur ID.
Reward points if it is helpful.
Regards
Sasikanth.Ch
Similar Messages
-
Help on Certified Documents from the Superintendent of Documents
I often review regulations and legislation that have been certified by the Superintendent of Documents. I've used Acrobat Pro in the past and was able to run OCR to at least allow for commenting/notes, highlighting text and creating my own bookmarks. When I click on the Recognize Text section it is greyed out. Thank you for your help.
If you're talking about a document that was signed with a certification signature, the signer can specify what restrictions should be enforced (e.g., "annotations, form fill-in, and digital signatures" or "No changes allowed"). So first check to see what changes are allowed by the signature, which you can determine by looking at the signature properties. Otherwise, check to see what security restrictions are in place by opening the file in Acrobat and selecting: File > Properties > Security
-
How & where do you get help with iTunes?
I've read the troubleshooting, and posted here, but no one seems to know enough about iTunes to answer. I can't convert video to an ipod version. I downloaded the sample.mov and tried to convert it, and I get the same result as with any other movie "Error occurred while converting the file "sample_iTunes". The required file cannot be found". I ran Filemon (Filemon monitors and displays file system activity on a system in real-time. Its advanced capabilities make it a powerful tool for exploring the way Windows works, seeing how applications use the files and DLLs, or tracking down problems in system or application file configurations. Filemon`s time stamping feature will show you precisely when every open, read, write or delete, happens, and its status column tells you the outcome) to see what file iTunes wasn't finding.
For some reason it seemed to think that mcicda.dll belongs on the desktop instead of in the system32 folder, so I copied it to desktop, and tried again. Now I still get the same "The required file cannot be found" error. The only problem is that iTunes returns a "success" for every file it searches. My movies & videos remain unconverted.
I understand that this may be beyond most peoples' technical expertise. This forum is users helping users. I tried Apple iTunes troubleshooting. It only covers one or two problems. So where are people to go when they don't have problem #1 or 2? With Windows, I can go to an official XP forum, and get help from certified windows experts. I can even get free email support with some software. But I've seen nothing of the sort from Apple for the iTunes software.
Did I miss it? Does it exist?This has been an enlightening experience. Thanks to the both of you who took the time to answer my apparently difficult question. Katrina S. said that Apple doesn't provide support for the iTunes software because it's a free program. While I could see that if it functioned passively (as with Windows Media Player), iTunes is totally enmeshed with the optimun functioning of the ipod. It was set up to function with the ipod, which is likely why iTunes didn't work with other mp3/media players. Now the music is DRM-free, and can work with other players, but purchased video is still confined to an ipod. Itunes won't even convert the sample_.mov from its own Troubleshooting, let alone video from other sources. If iTunes is supposed to be an integral part of using an ipod, then the malfunctioning of iTunes should be an issue Apple should address. If I Google "Windows Media Player support", the 1st 4 results are from Microsoft, not from a user forum (even though the program is also free). One site even starts with "Start here when Microsoft Windows Media Player is not working how you expected". Wow, that IS support! There's no reason (aside from cheapness? dismissiveness?) that Apple shouldn't step up.
Nonetheless, I will call Apple. Nothing to lose. At worst, I'll have to initially deal with some smug person who will be yet more condescending when he finds out I have a pc and not a mac. Then, after he can't fix the problem, I'll be passed on to the much nicer, more knowledgeable tech support person. This was my experience with Apple support a couple years ago with my 1st ipod. I can go through this again if it helps. I'll let you know.
Pickles1128, I have tried this program (MPEG Streamclip [www.squared5.com])to convert movies/music videos for my ipod nano 4th gen. Now, just the "audio format not supported" excuse appears when ipod won't load the video. But this is the same result I had gotten using Moyea Video Converter. I used MPEG Streamclip with the newest Quicktime, not the Quicktime alternative program mentioned for those without QT. While this program would export the video/audio file, all options involving actually converting the file were grey-ed out and unusable. Sure, I suppose I could separately export the video & audio files in workable formats, then (currently beyond my ability), recombine them. But shouldn't programs work much easier than this? -
Error 1402: Could not open key UNKNOWN\SliderCtrl.SlideCtrlProxy\CLSID
I have two users. User A wrote an application using LabVIEW 7.1, including an installer, and gave said application and installer to User B. User B has 8.0 and 8.1 LabVIEW RTE's installed properly. When trying to run the application installer, or just the 7.1 RTE installer alone, the following error occurs every time:
Error 1402. Could not open key:
UNKNOWN\SlideCtrl.SlideCtrlProxy\CLSID
I took the registry info from my machine (had 7.1 installed on it at one time; currently has 8.2 and 8.5), exported everything with "SlideCtrl" in it, imported those into User B's registry, double checked the permission in the appropriate places, re-ran ... same problem. Help?
Certified LabVIEW Developer
NI-VLM AdministratorI found the answer on my own, documenting for the next poor soul ... this was under WinXP
* Go into regedt32
* Right-click on HKCR and select "Permissions" -OR- Click on HKCR and choose Edit->Permissions
* Add the current user and set permissions for Full Control and Read.
It is NOT sufficient to give "Everyone" Full Control and Read, it needs that user id. Brilliant ... current user is not part of "Everyone".
Certified LabVIEW Developer
NI-VLM Administrator -
Exchange 2007 config error SITE_3
Hello to all!
I have an Exchange 2007 server, and after some update, the attached error showing up:
It's in hungarian, it says this:
"File name: ...
Error: The next configuration route can't be recognized: ..."
This problem was in the applicationHost.config file, and in the IIS7, there was a SITE_3 site, which we couldn't open.
But we swap the applicationHost.config file with an older version from
C:\inetpub\history, regarding to this site:
http://shipoint.com/2012/03/27/fixing-corrupted-applicationhost-config-file-in-iis-7/
The IIS is back to normal, there are no SITE_3 there, but in the Exchange management console, there is still the same error. I get this error too, when I wirte Get-OwaVirtualDirectory to the Management shell. Is there anyone, who saw something like this,
and had succesfully fixed it?Hello
everyone,
thank you
for
answering,
finally
opened
with
Microsoft
support
case
and
showed
me
that
delete
servers
from
ADSEDIT.
I deleted
the
servers
that
should
not
be
and
immediately
everything
started
to
work
properly
Many
thanks to
all
for
the
help
Microsoft Certified IT Professional Server Administrator -
Hi, I am just starting out with LVOOP. I've read the main knowledge-base articles, had a small amount of training (on the Advanced Architectures course) and have had a play with my own classes.
I now want to use OOP for a test system, so I created a class with lots of standard data types, DBLs, arrays of DBLs, Int32s, etc. I created a load of accessor VIs and some manipulation VIs and that was fine.
Then I decided to change the name of a member in the private data control (.ctl) from "Voltage Range" to "Voltage Spread" as this is more descriptive for me. Having used clusters many times before I expected that the bundle names would simply update automatically. This is not the case. Having done some searching it would appear that this is all about class mutation. I can see why LabVIEW would want to monitor changes to the private data control but I want all my VIs to refer to the latest version of the .ctl file.
I have had a search online about this but now I am more confused than when I started as there appears to be no simple "right-click and select Update" type command.
Any help much appreciated. By the way, I am using LabVIEW 8.5.
Certified LabVIEW Architect
Solved!
Go to Solution.I had a very small audio class project that works. I copied it, changed a member lable and it did not ripple through. I am also seeing black lines around my object wires for no apparent reason.
From what I can read this is something to do with default values, but I cannot find out how to fix it or what the implications are.
I doubt NI would be interested in my call as I'm using 8.5 and I'm not on any form of Software Support Programme. Maybe when I have some money to my name!
Thanks for your help
Malcolm
Certified LabVIEW Architect -
Converting from photoshop to Flash
I do cartoons with photoshop but i want to add sound to them
but for this I need flash but i cant convert those files to
flashtboparis,
you can export from P'shop in a number of formats that flash
can import - but retaining layers is
not supported - maybe now that Adobe aquired Macromedia that
will change (hint hint if Adobe reads
this).
There is a plugin called PSD2FLA:
http://www.medialab.com/psd2fla/
I have it and it wors great. A little pricey for some but it
has saved me hours and probably days of
work - so it was worth it for me.
otherwise you can, if you have Fireworks, open the PSD in it
and then save as and open that file in
Flash - i cant remember exactly how but i was able to retain
layers going through Fireworks once -
but transparency was hit or miss (mostly miss).
Other people have reported importing PSD files via quicktime
- but i have never had any success with
this.
Google may be your friend here.
hope this helps
--> Adobe Certified Expert *ACE*
--> www.mudbubble.com
--> www.keyframer.com
tboparis wrote:
> I do cartoons with photoshop but i want to add sound to
them but for this I need flash but i cant convert those files to
flash -
how do i bend an image in flash i really cant figure it out
cheers warbyyou can't - flash does not have an image warp feature - you
would have to do 1 of 2 things:
Trace Bitmap the image to convert it to vectors - then use
Free transform tool > Envelope or Distort
tools.
OR
Bend the image in P'shop and then import into flash.
If you need to bend the image as an animation - then flash is
not your tool - i would highly
recommend Animae Studio (www.e-frontier.com) for this (I use
it all the time). It supports IK
(Bones) and Image Warp - then export as Quicktime and Import
into flash.
hope this helps
~~~~~~~~~~~~~~~~
--> Adobe Certified Expert
--> www.mudbubble.com
--> www.keyframer.com
~~~~~~~~~~~~~~~~
Stevew wrote:
> how do i bend an image in flash i really cant figure it
out
>
> cheers warby
>
> -
Hi everbody,
I want to determine the starting point of signal. For this, What can I do?You need to provide more information for us to help you. Your question is very vague and you don't provide any screenshots or sample VIs of what you've tried.
Try to give more information about your problem and maybe we can help.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets -
Exchange 2007 OWA Error after installing Service Pack 3 (MSExchange OWA event 65)
Hi everyone, I have multiple servers in Exchange 2007 SP1, Windows Server 2003 SP2 64bit.
I installed SP3 and RU15 a CAS / HUB server and now I access OWA, showing the below error:
Outlook Web Access did not initialize. There has been an event for the system administrator can resolve the problem. Contact the support of the organization.
Object reference not set to an instance of an object.
Request
URL: https: // mailserver01: 443 / owa / auth / error.aspx url = https: // mailserver01 / owa / & reason = 0
Exception
Exception type: Microsoft.Exchange.Clients.Owa.Core.OwaInvalidConfigurationException
Exception message: Object reference not set to an instance of an object.
Call stack
in Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager () in Microsoft.Exchange.Clients.Owa.Core.Globals.InitializeApplication () in Microsoft.Exchange.Clients.Owa.Core.Global.ExecuteApplicationStart (Object sender,
EventArgs e)
Inner Exception
Exception type: System.NullReferenceException
Exception message: Object reference not set to an instance of an object.
Call stack
in Microsoft.Exchange.Clients.Owa.Core.Configuration.CheckPublicFolders (ADSystemConfigurationSession session, ADObjectID [] pfdbIds, Boolean & allLegacy, Boolean & allLater) in Microsoft.Exchange.Clients.Owa.Core.Configuration..ctor (ADSystemConfigurationSession
session, String virtualDirectory , String WebSiteName, ADObjectID distinguishedName, Boolean isPhoneticSupportEnabled) in Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.LoadConfiguration () in Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager
In server events next event is logged
Event Type: Error
Event Source: MSExchange OWA
Event Category: ADNotifications
Event ID:. 65
Date: 12/27/2014
Time: 7:20:54
User: Not available
Team: mailserver01
Description:
There was an error loading the configuration parameters of Outlook Web Access. Virtual directory "owa". Website: "Default Web Site".
Error message:
"Object reference not set to an instance of an object."
HOW CAN I SOLVE THIS?
thank you very much
Microsoft Certified IT Professional Server AdministratorHello
everyone,
thank you
for
answering,
finally
opened
with
Microsoft
support
case
and
showed
me
that
delete
servers
from
ADSEDIT.
I deleted
the
servers
that
should
not
be
and
immediately
everything
started
to
work
properly
Many
thanks to
all
for
the
help
Microsoft Certified IT Professional Server Administrator -
How to add shortcut in the CVI editor
Hello,
I was very disappointed to discover that my dear old "Ctrl+Y" to cut a text line in the CVI editor disappeared in the latest version (it is now associated to the Redo command...).
Can I change somehow this setting or can I add new shortcuts to commands that actually do not have shortcuts ?
It is frustrating to hear a dlin-dlon instead having a line cut every time I run the for-me-automatic Ctrl+Y :-))))
Thanks a lot,
MarcoOptions|Change Shortcut Keys... might help
Martin
Certified CVI Developer -
hallo,
just had the case, that an application built with CVI 2012 did not run on a machine with RTE 2010 installed. is there a possibility to check and echo this to the user in the kind "found version <a> but need <b>" ?
best regards
SimonHello Simon,
did you distribute your application in an installer package?
You can avoid possible incompatibilities by building an installer package, which contains your application the RTE 2012 that is required to run it.
(Explained here and here)
You can leave the old RTE 2010 on your target machine if you still need it, but the latest version is always fully backwards-compatible to applications built with previous versions of CVI. See here for further information on compatibility.
I think that this would also solve your question, because if you install the right RTE you don't really need to check for the installed versions...?
Hope that helps,
Michael
Certified LabVIEW Associate Developer -
SWF in IE shows up like a link
I was wondering if anyone knows why when i embed a swf file
in a dreamweaver doc it shows up like a link in IE on windows? What
i mean by this is if you have say a swf banner and it is not
intended to be a link, when you roll over it your cursor treats it
like a link and a border forms around the swf. if you click it, it
ends up going away. I only see this happening in IE. Anyone know
how to get rid of this? an example can be found on this page i am
working on
http://mmosinc.com/
if you roll over the animation you will see what i mean.
thanks,
-tomsearch this forum and/or google - look a couple of posts down
in fact already asked and answered
within the hour - been headline news for weeks and countless
articles across blogs and adobe.com and
microsoft.com - been probably the most discussed topic in
recent weeks in the very thread - search
for "active content" to find out what it is, why it exists
now and possible ways to work around it.
hope this helps
--> Adobe Certified Expert *ACE*
--> www.mudbubble.com
--> www.keyframer.com
tloughlin design wrote:
> I was wondering if anyone knows why when i embed a swf
file in a dreamweaver
> doc it shows up like a link in IE on windows? What i
mean by this is if you
> have say a swf banner and it is not intended to be a
link, when you roll over
> it your cursor treats it like a link and a border forms
around the swf. if you
> click it, it ends up going away. I only see this
happening in IE. Anyone know
> how to get rid of this? an example can be found on this
page i am working on
> <a target=_blank class=ftalternatingbarlinklarge
> href="
http://mmosinc.com/">http://mmosinc.com/</a>
>
> if you roll over the animation you will see what i mean.
>
> thanks,
> -tom
> -
SAP C_TSCM52_60 MM Certifiation Help
Hi Experts,
I am going to write first time SAP MM certification ( * SAP Certified Application Associate - Procurement with SAP ERP 6.0 * )
Exam code :C_TSCM52_60
Level: Associate
SAP link provides the reference material for the exam as below.
1) TSCM50
2) TSCM52
Please provide inputs on the latest versions of the above material
I have a copy of both books with following versions
1) TSCM50: 2004 Q1
2) TSCM52: 2004 Q1
Confirm if i have the latest version? do i need to study any latest version materials or the above version is OK?
and aslo please advice do i need to study the lower level materials like SCM510,SCM515,SCM520,SCM550 which is also mentioned in SAP Website under this code.
Please help.
Thanks
SireeshaPlease check these answered links:
MM Certification
Certification MM
SAP MM certification
SAP MM Certification -
Fresher Jobs for Certified ABAPers - Need Working Professionals' helps...
Am 1 among the Certified ABAPers (fresher) in the job hunt. Would be of great help if the working professionals help us out in our job hunts. Please share info on the openings / buddy referrals in your concern. Many many many are waiting, just not me!
Hi Nithya,
as far as i have seen the scenario, its too tough to get a job as an fresher in most of the IT companies,
so according to my own experience, you have to search your job in any middle or small scale companies, if you are in any major city , then i will suggest you to look into any infrastructure or real estate company, who have just implemented sap, in your city you have to search for those infrastructure company , those having many project in our out of town, any infrastructure company having many projects in their hands generally implements SAP , and after that they needs some abaper to support their implemented projects.
You can also search your job in any small level company whom have some more branches in other states or cities, these are handy task and may take some times, but will be fruitful to you , if you will succeed in achieving your goal.
If you have any dought, please feel free to revert by specifying the city name you are looking for a job.
Maybe you are looking for
-
I recently bought an iPad thru the Chinese Apple website. When I try to buy apps in the App Store, I get a bubble saying I'm not allowed to do this; I must enter thru the US Apple website. However, even if I start in the US website, as soon as I hit
-
Newly purchased Gujarati font doesn't show Hindi characters, only English.
I bought Gujarati and Devangari. Devangari works great in my InDesign CS6; Gujarati shows copy in English characters, not Hindi. I am using a Macintosh. The top part of the image is the Devangari type.
-
Acrobat Forms Question - Secure Form Handling
I'll preface this post by saying I'm not a designer nor have I ever designed an Acrobat form. If the following is possible, I'll probably have to find a developer to do it for me. I have a small business that needs to receive and pass around by emai
-
Plist strings to UILabel: formatting specific words in the text?
Developers, I have a UILable populated by a plist string. I would like the UILabel to display text, with specific words in bold format. I have looked around for a solution to this problem, but I haven't found anything useful on the net. Is this possi
-
Server Exception trying to access in coreapplication.
Hi all, I have a problem with the Enterprise Manager (v 11.1.1.5) I would like to change repository, so i click on corepplication (Farm_bifoundation_domain->Business Intelligence -> coreapplication) on the left side menu, but i get this error: Stream