Help in moving ODI to Production

Hi,
I need help in migrating ODI from Development to Production.
The Development repositories point to the development work & master schemas.
The Production repositories point to the production work & master schemas.
I have setup the production repositories with different internal Ids.
The production's work repository is in Execution mode.
Now how do I go about importing the development scenarios into production?
Can somebody please give me step by step details?
Thanks,
Ruby

Thanks for all your replies!
I intent to use the same Context in production.
Say for example my Logical Schema is TESTX that points to X schema in my development system. The physical schema is also TESTX.
All the scenarios in my development have the Logical schema as TESTX.
Now before I import these scenarios into Production system, I need to import Topology from Development into Production & change the data server of this Physical schema TESTX to point to the production schema right?
& after importing the Topology from Dev to Prod system, can I delete the data servers that are not needed to show up on production's Topology Manager?
Thanks,
Ruby

Similar Messages

  • ODI to Production

    hi,
    I am a systems analyst and I have no experience with ODI, and little development (loads, interfaces), I need help for the following problem.
    how can I move the development environment for ambinet Production.
    What are the steps, where to start?
    very grateful.

    Welcome to the forum.
    Please start by having a peek here : Help in moving ODI to Production
    This should help

  • RG1 - Excise Related things to care of before moving to the Production

    Dear Friends,
    1. Can somebody pl let me know the Excise Related things to care of before moving to the Production. Like the initial posting of the stock and RG1?
    2. Also pl help me to go through the various process related to Excise( Utilization and Excise Registers updation related to SD?
    Thanks
    Isaac

    Isaac wrote:Hi,
    >
    > Thanks Raja...yes, the details provided by Mr. Lakshmipathi is really a good one.
    > I have one doubt in this...with reference to the point#3..  " Also update the outward movements of finished goods ( IDH for Domestic Sales and IWE for Exports under Bond/ IDE for Exports against payment of Duty)."
    These are various classification for utilization purpose
    IDH Removal from factory on payment of duty for Home use
    IDE Removal on payment of duty for export under no bond
    and there are two or three more i dont remember exactly, but you can get that by searching.....
    >  1. Does IDE refers to the LoUT (Letter of Undertaking), if not what should be used for the LoUT?
    this is different from LoU,  IDE is Classification for Removal on payment of duty for export no bond
    >  2. Can u provide me some inputs on Utilization aspects as well.
    We have to make utilization determination based excise grp & series grp....
    SPRO>Logistics u2013 General>Tax on Goods Movements>India>Business Transactions--> Utilization -->Utilization Determination
    Detailed about this is already discussed previously also.
    [Utilization|Excise Utilization]
    thanks,
    Raja

  • HT201302 I am trying to copy photos from an iPad to a Mac Air, but iPhoto does not recognize them Do you have to use PhotoStream to do this. Please forgive the ignorance, but we have just started moving to apple products and I know nothing about them. Tha

    I am trying to copy photos from an iPad to a Mac Air, but iPhoto does not recognize them. Please forgive the ignorance, but we have just started moving to apple products and I know nothing about them. Do you have to use PhotoStream to do this?

    How did the photos that you want to copy off get on the iPad  ? To copy photos to your computer that were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites then see this page - on a Mac you should be able to use iPhoto, Aperture or Image Capture
    To copy photos that were originally synced from a computer you will need a third-party app on your iPad such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.

  • Needing help with moving pictures around

    I am in need of help in moving pictures and images around
    dreamweaver document window. My older brother gave me his computer
    witch has dreamweaver MX (he is in Irag) so i can start building
    building my own websites. I went to borders and bought a book on
    dreamweaver MX. Here is where I am having a problem with: when ever
    I bring a picture into the document window I can not move the
    picture around the document window. The book say "place the
    insertion point where you want the image to appear" but there is no
    insertion point. There is just a straight line as if I am about to
    type something. It's almost like I am in microsoft word. If I take
    the mouse over the picture , and then left click and try to drag
    the picture to the location I want it in, it doesn't move. Can
    somebody PLEASE help me out with this problem. Thanks Jical

    Nadia gave you a good place to start… Here is what you
    have to understand. Web pages are based on specific code that tells
    the viewer’s browser how to display the page. There has to be
    something that says, “Put this picture in the lower right
    hand corner, and center this image in the middle of the
    screen”
    Then there are further instructions that say “Put this
    text here and that link there”. So Dreamweaver (and most
    other web developing programs) do not work like Illustrator or
    PowerPoint where you can simply grab a picture and slide it around
    the page.
    In its simplest form you might drag an image onto the
    Dreamweaver design view page and click on the center button in the
    properties dialog.
    Then type in text and center it, left justify, right justify,
    etc. Add another picture and so on and you could possibly create a
    passable web page. Now click on the Code view button and see what
    code Dreamweaver generated in order to do all of this.
    That is what you will really need to understand before you
    can really get proficient at web design.
    At the next level, you can start to add in tables. These
    actually are similar to tables in Word. You can put text in one
    cell, images in another, colored backgrounds, thick and thin
    borders with contrasting colors, and you can start to see how to
    “contain” your images as Nadia suggests.
    Now look at the code again and see how these cells are
    defined around your content.
    Once you understand how this works, you will get much more
    comfortable with Dreamweaver. You will just have to get used to the
    idea that it doesn’t work like all of the publishing software
    that is only dependant upon its own format for layout. HTML is
    dependant upon the many browsers, computers, operating systems,
    user preferences, and a million other unknown factors.
    That’s why this forum has more than 91,000 posts…

  • HELP! moved "all images" to trash by mistake. They are still there but I can't undo. How can i return photos to iphoto? Thx!

    HELP! moved "all images" to trash by mistake. They are still there but I can't undo. How can i return photos to iphoto? Thx!

    Thanks but I have no "Put Back" option when right-clicking. When I attempt to open a photo in iPhoto I receive a white exclamation point on a black background. I have restarted my PC since first encountering this problem but have not emptied trash though i appear to be out of memory. Also, iphoto library shows size as 17GB however, each photo shows 0KB. When i attempt to open a photo i receive message "Item <photo filename> is used by Mac OS X and cannot be opened." I can see the images when scrolling in iPhoto but they disappear when the screen is still. THANKS!

  • Objects Moved to XI Production but no execution  --  please help  ?

    Hi friends   ,
                         I have developed my scenario and moved [ Transported ]   my design objects [IR] to production .  <b>I have tested in XI Dev everything is working</b> .
                        I have done the  configuation  [ID]  in XI Production side. But , no further processing [ action ] is happen.
                      scenario   JDBC  <-- > RFC
                         I have configured my JDBC Sender adapter       exacylt as what i configured on   XI Devoelopment side.
                       It is not even firing select query and update query on DATABASE ?
                      It is not even triggering the receive step of BPM .
                      What can i do for this ? Please help me .
    Best Regards .,
    V.Rangarajan

    Hey
    thats the JDBC driver,did you install the drivers using SDM properly?
    also have a look at the following
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bf4b1055-0d01-0010-32a3-b3848d77a6b9
    thanx
    Ahmad
    Message was edited by:
            Ahmad

  • CS3 Help for "Licensing for this product stopped working!"

    Today my CS3 gave this error, although I've been using CS3 without any problems with VISTA since last April! See product & OP sys info at btm.
    I searched for help, I found under TechNote kb402004 the implied solution! Well not quite since it is NOT working! I spent today over 8 hrs in an attempt to fix this.
    The error in detail: Licensing for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help."
    OK, I am my own IT administrator, I called Adobe 1-800-833-6687 but after selecting option 1) on the phone just rings and rings, no answer for about 1.5 hrs!!! So I gave up!!!
    The TechNote does say to uninstall; well a bit difficult because I have to deactivate first! But for that CS3 has to be running!
    SO followed the solutions all 3 of them.
    1) Doesn't do anything, same problem!
    2) is the same result!
    3) part 2, I moved the cache file as indicated, cS2 comes alive, well barely thus I was able to deactivate.
    However I was not having luck in uninstalling from VISTA. Using Start >Control Panel>Uninstall program> Adobe Photoshop CS3, absolutely refused to work!
    SO I tried manual uninstall (the hard way) as out lined by TechNote kb401501, tried several times went through all the steps, including downloading the Microsoft msicuu2.exe to do it with! After several tries it did finally deleted CS3, so I could attempt a clean re-install!
    SO I downloaded CS3, well I could only download the trial one, I do not have the CD disk, as my CS3 was an internet download (upgrade). 20 minutes later (luckily for hi-speed it only took 20 minutes for the full download, I tried to reinstall! Turn off antivirus, turn off firewall so I cam install!
    Not quite! It failed. SO I had to go through all the above again to clean it out from VISTA. Download again! Done this 3 times before it finally started to install. Of course that is the old version, why would Adobe be kind enough to have the updated version available to install in the first place??? OK so downloaded another 180 MB or so, tried to update! Well the update crashed 4 times too, before CS3 finally was updated to 10.0.1. Then I had to register and activate CS3 again! Great it should work, well so I though!
    Well not quite it gave me the same error!!!! SO what is wrong with CS3??? I need help! Thank all of you who can help me!! System Details:
    Adobe Photoshop Version: 10.0.1 (10.0.1x20071012 [20071012.r.1644 09:30:00 cutoff; r branch])
    Operating System: Windows NT
    Version: 6.0
    System architecture: Intel CPU Family:6, Model:15, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2
    Physical processor count: 2
    Processor speed: 2400 MHz
    Built-in memory: 3070 MB
    Free memory: 1719 MB
    Memory available to Photoshop: 1681 MB
    Memory used by Photoshop: 55 %
    Image cache levels: 6
    Serial number: XXXXXXXXXXXXXXXXXXXX
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS3\
    Temporary file path: C:\Users\LASZLO~1\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
    Startup, 291.7G, 69.6G free
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS3\Plug-Ins\
    Additional Plug-ins folder: not set
    Installed plug-ins:
    ADM 3.10x21
    ASDStrm 1.03x2
    Accented Edges 10.0 (x101)
    Anaglyph Flip NO VERSION
    Angled Strokes 10.0 (x101)
    AntiGhost NO VERSION
    Average 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
    BMP 10.0.1 (10.0.1x20070928 [20070928.r.1642 08:15:00 cutoff; r branch])
    Bas Relief 10.0 (x101)
    Camera Raw 4.3.1
    Chalk & Charcoal 10.0 (x101)
    Charcoal 10.0 (x101)
    ChromaSolarize NO VERSION
    Chrome 10.0 (x101)
    Cineon 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])
    Circle to Square NO VERSION
    Clouds 10.0 (10.0x20070321 [20070321.m.1480 16:39:00 cutoff; m branch])

    Which operating system?
    Try
    Win: http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
    Mac: http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

  • Moving Exchange 2010 Production DAG Setup and Servers to difrent Date Center with new IP Addresses

    My Setup
    Exchange 2010 SP3 2 Mailbox, 2 Hub/CAS, 2 TMG Servers in Production
    Exchange 2010 SP3 2 Mailbox, 2 Hub/CAS, 2 TMG Servers in DR Site
    Exchange 2010 DAG implemented with site level redundancy
    Requirement
    Need move Production Exchange setup along with DAG configuration to a new location.
    IP Addresses for servers and DAG setup will change
    No change in Server name and DNS names
    During production server movement Mail services will be activated from DR Site
    Need help in planning and executing the IP Address change/DAG Change
     and Server movement.
    Kumar K S

    Hi,
    I will have the following plans:
    1. Active the DR site as the main site during the migration.
    2. Moving the Server to the new site
    3. Change the activate back to the Production Servers
    https://social.technet.microsoft.com/Forums/exchange/en-US/fb9a27c3-81f8-4079-aeb8-42119b1e23bf/changing-ip-address-of-exchange-server
    Thanks,
    Simon Wu
    TechNet Community Support

  • Moving Developing to Production Server

    Hi All,
    can any one please let me know the procedure for moving the applications from Development server to Production server with steps in 7.1.3 version for ASO application.
    Regards

    Hi,
    1. As Atul said, use migration wizard , thats one way
    2. In your EAS console, add both the analytic server ( one of dev and the other one of production) and you can copy an application to other ( it copies all the data base objects like scripts , rule files , calc script ...etc) . But, got to load data into it.
    Hope it helps
    Sandeep Reddy Enti
    HCC
    http://hyperionconsultancy.com/

  • Help needed - moved user accounts

    I did an upgrade install on my Dual G5 today, but Leopard doesn't know where my users' files are located. I have a very fast (but smaller) HDD for the OS, and moved my user files to a larger HDD. The links were not carried over in the upgrade/install.
    I believe it was a post from Kappy that helped me in moving my user folders initially. Can anyone help me with the needed command line entries needed so that Leopard knows to look to the other HDD for my users?
    Thanks-Gary

    If you've reached the limit of 5 authorisations you have the option once a year to deauthorise them all in one go and start over. By the way, this has nothing to do with the number of products you've purchased and registered. The reason for this is that you have a limit of 5 computers on which you can play purchased content: About iTunes Music Store Authorisation and Deauthorisation
    If your system crashes or your reinstall your operating system without deauthorising iTunes first, even a single computer can use up your limit of 5 authorisations. See also this article: One computer using multiple iTunes Music Store authorizations

  • Unable to modify Namespace on Exported Lists when moving to QC / Production

    I've created several lists and infopath based on external content types (SQL Server) and was able to export / import the ECTs to QC server environment - with no issues.
    However, any and all attempts to migrate my lists and forms that use the ECTs - results in a failure because i cannot change the development URL (namespace) to a QC / Production URL.
    It's frustrating that "migration" or "deployment" doesn't have support for modifying the actual URL used by created Lists/Forms "built in".
    My first thought was "Content Deployment", but I was told that doesn't work with ECTs...
    Any help would be appreciated.
    - Dan

    Hi,
    According to your post, my understanding is that you wanted to
    migrate several lists and forms based on external content types to QC server environment.
    I recommend that you can export the external content types to
    an XML file which are saved with a .bdcm file extension first
    by using the SharePoint Designer 2010 or using the Business Data Connectivity Service Application in Central Administration.
    Then, you can find <Entity Namespace> in the XML file and you can modify the URL to your
    QC server environment URL and migrate the external lists to your product environment.
    In addition, you can try to save the site containing the External List and forms as a template. This template will appear as a WSP file in the Site Collection gallery.
    And, you can save the WSP file out of the gallery, and open the WSP file in Visual Studio 2010 using the import WSP project.
    Then, you can make a new WSP file and move the External lists to your product environment by deploy them with a feature.
    For more information, you can refer to:
    http://camerondwyer.wordpress.com/2012/08/08/how-to-export-sharepoint-2010-external-content-types-bdc-metadata-models-to-xml-file/
    http://gadekarsatish.blogspot.com/2013/10/import-export-list-in-sharepoint-using.html
    http://jimecox.wordpress.com/2011/01/11/deploying-an-external-list-to-new-siteinstance-via-feature/
    Here are some similar threads for your reference:
    http://social.technet.microsoft.com/forums/sharepoint/en-US/2f5ddeef-011f-4827-8c22-67c8c85e93c6/moving-a-site-w-external-lists-bcs-to-another-environmentserver
    http://social.msdn.microsoft.com/Forums/en-US/6ecd1a7d-5a1f-4fbd-8360-1432ccbb07a1/moving-external-list-bcs-infopath-forms-to-another-sharepoint-instance?forum=sharepointdevelopmentprevious
    Best Regards,
    Linda Li
    TechNet Community Support

  • Please help, I moved my music from library 2my ipod, and it's not there...

    I've uploaded my music onto my library, which including converting music to a compatible format, and moved it to my ipod in iTunes. In the list everything is there. However, once I disconnect my ipod and switch it on, only 4-5 songs appear. Yet I've moved about 80 songs onto it.
    Can someone help me? I have so much music that I want to put on my 30gig ipod, but if I can't get it to work, I'm considering to return it. (Which is sad cause it was a 21st Bday pressie.)
    Any help would be much appreciated.
    Thankyou.

    Read this article http://docs.info.apple.com/article.html?artnum=301748
    If you don't want a bunch of sub-folders all you need to do is create a new Compilation and call it - mp3's or what ever - select all the tunes that you want in that Compilation from the main iTunes window - CMD-I and Compilation =Yes. All those tune will now be in on folder located in the Compilations folder of iTunes. For this to work you also need to select the 'keep' option.
    MJ

  • Help ,please - moving from 8.6 to 10.2 ..???

    Hi my name is PATRICIA,
    and I really need some help to know if I can move from 8.6 to 10.2 or to 10.4.
    My computer it's a G3 with 350 mhz and I have a internal HD with 38.16 GB and my total ram memory it's 128 mb - 02 card/memory of 64 mb each.
    What can I do, to be able to move from 8.6 to 10.2 or 10.4 operational system...????
    Do I have to buy more memory .??? how much it's the limit to my computer..???
    Thank you and hope to hear soon ,from you guys.....
    sincerely,
    Patricia.
    G3 iMAC   Mac OS 8.6 or Earlier  

    Upgrading is an individual thing involving various factors, the chief one today being expense. With a MacMini being available SO inexpensively, especially now that even a used market has developed on them, spending money to upgrade an old computer will still leave you with an "old" and probably much slower old computer, as the bus speeds have dramatically increased in the past few years, all other things being equal (RAM, HD space, OS), will still make a faster computer in a new(er) one.
    If one likes to tinker with computers, then cost is not as much as factor as it is partly a "hobby," by definition not an economic matter.
    If you have programs you like and work and you don't "need" newer versions and they run on your old computer presently, then there is something for leaving the status quo and simply get a second computer (say a MacMini) and use it for the newer stuff as it comes along and as your old stuff "breaks" (however, my MacPlus still has yet to break!)
    Some models of Macs lend themselves to upgrading much more than others. In general, those which came with extra RAM slots, extra PCI slots, extra bays space for hard drives, CD burners, and had a few different built-in ports, are more worthwhile to upgrade and are easier to do. I would think, for example, an older iMac is more likely better left "as is" and to save for a newer Mac. A tower with pci slots available might be worth some inexpensive upgrades, such as an USB card to run a printer.
    Finally, one needs to remember that a computer is just a tool, not a status symbol, so if it is useful as is, then let it be. If it is not useful as is, then the cost analysis for any replacement purchase kicks in: how much to "fix" versus buying "new" (or "newer" on eBay or from a reseller)?
    The OS X issue is a separate problem: OS X is a completely different operating system fundamentally (UNIX) from the traditional MacOS up through 9.2.2. OS X's Classic Environment lets one load OS 9.x to run older traditional Mac programs (assuming THOSE programs themselves will work on OS 9.) Technology is moving so fast that the bottom edge of "current" is getting way way past what will WORK on the older Macs. This means at some point one needs to plan on getting a newer machine which will work on the internet things out there. Most system requirements these days specify high end Panther (10.3.9) or Tiger (10.4.x) bypassing completely the MacOS, OS X puma and jaguar. Processor speed is hovering as a minimum requirement aroung 500 mH often. RAM is around 256MB bare minimum, more recommended. Mac processors are more frequently specifying G4, G5, or Intel, leaving behind even the G3s (although that may be a case of them just not spending time and money to test on a G3 than a true mandatory requirement.) As Tiger is now a nicely mature version of OS X, it does like (require?) a much more powerful computer to work satisfactorily. Thus, your old computer may still work for years well on its contemporaneous setup, and at some point, one gets a newer computer to do the newer stuff, making for a smooth transition.
    PM9600/233 (OS 8.6); PM9600/G4 (OS 9.1); Perform 6320 (OS 8.1); MacPlus-OS 6.0.8   Mac OS 8.6 or Earlier  

  • Help in Moving Average Query

    Hello,
    I would like to have a query for finding moving average. based on some conditions.
    I have written query as follows:
    SELECT Column1,
    MONTH_END_DATE,
    (AVG(sum(Col2 *(case when (Col3 ='XYZ') then 1 else 0 end)))OVER (PARTITION BY Column1 ORDER BY MONTH_END_DATE ROWS 5 PRECEDING)) AS AVG_XYZ,
    sum(Col2 *(case when (Col3 ='XYZ') then 1 else 0 end)) as Cumm_XYZ
    FROM
    Table_cd
    WHERE
    Column1 ='1234567'
    GROUP BY Column1, MONTH_END_DATE.
    My problem is if there are no data in a month, then the average calculated will vary from the required.
    For Eg., If i have to find the average of months between JULY and DECEMBER and if the table doesnt have data in the month of OCTOBER, NOVEMBER then while finding the average it will consider only 4 Months instead of 6 Months..So is it possible to write query such that if there are no data in a month then consider the values for that month as zero and then find the average..
    If anybody can help me in this regard, it will be very useful

    Mr.BluShadow if u can just show me how i can find
    average for the values returned by the example
    written by you, it would be very helpful..Obviously the hint wasn't enough... here's another...
    SQL> ed
    Wrote file afiedt.buf
      1  with t as (select to_date('01/07/2007','DD/MM/YYYY') as dt, 1 as val from dual union all
      2             select to_date('02/07/2007','DD/MM/YYYY'), 2 from dual union all
      3             select to_date('03/07/2007','DD/MM/YYYY'), 3 from dual union all
      4             select to_date('04/07/2007','DD/MM/YYYY'), 4 from dual union all
      5             select to_date('01/08/2007','DD/MM/YYYY'), 5 from dual union all
      6             select to_date('02/08/2007','DD/MM/YYYY'), 6 from dual union all
      7             select to_date('03/08/2007','DD/MM/YYYY'), 7 from dual union all
      8             select to_date('01/09/2007','DD/MM/YYYY'), 8 from dual union all
      9             select to_date('02/09/2007','DD/MM/YYYY'), 9 from dual union all
    10             select to_date('03/09/2007','DD/MM/YYYY'), 10 from dual union all
    11             select to_date('01/12/2007','DD/MM/YYYY'), 11 from dual union all
    12             select to_date('02/12/2007','DD/MM/YYYY'), 12 from dual union all
    13             select to_date('03/12/2007','DD/MM/YYYY'), 13 from dual union all
    14             select to_date('04/12/2007','DD/MM/YYYY'), 14 from dual
    15            )
    16  --
    17  select m.dt, AVG(NVL(t.val,0)) as val
    18  from t, (select add_months(to_date('01/07/2007', 'DD/MM/YYYY'),rownum-1) as dt from dual connect by rownum <= 6) m
    19  where m.dt = trunc(t.dt(+),'MM')
    20  group by m.dt
    21* order by dt
    SQL> /
    DT               VAL
    01-JUL-07        2.5
    01-AUG-07          6
    01-SEP-07          9
    01-OCT-07          0
    01-NOV-07          0
    01-DEC-07       12.5
    6 rows selected.
    SQL>

Maybe you are looking for