Help in update data

Hi, I am unable to update in entity column and gets the error. How I can update this script successfully. Any help please.
My SQL-Script
update pruder set hr_tb=345 where  hr_tb=10
Error message
Can not
update
identity
column

UPDATE requires an INSERT and DELETE, so IDENTITY_INSERT won't help.
This technique can work...
CREATE TABLE #forumTable (hr_tb INT IDENTITY, val INT)
INSERT INTO #forumTable (val)
VALUES (1),(1),(1),(1),(1)
ALTER TABLE #forumTable ADD hr_tbX int
UPDATE #forumTable SET hr_tbX = hr_tb
UPDATE #forumTable SET hr_tbX = 6 WHERE hr_tbX = 1
CREATE CLUSTERED INDEX sorter ON #forumTable ( hr_tbX)
ALTER TABLE #forumTable
DROP COLUMN hr_tb
ALTER TABLE #forumTable
ADD hr_tb INT IDENTITY
DROP INDEX sorter ON #forumTable
ALTER TABLE #forumTable
DROP COLUMN hr_tbX
SELECT * FROM #forumTable
DROP TABLE #forumTable
But, you might be better off just deleting the record and re-adding it to the end of the table.
As Jingyang says, its bad, don't do it... it leads only to the dark side, and they do not have the cookies they promised.

Similar Messages

  • Need help in UPDATE data in SQL Query

    Hi all,
    I am trying to update data in the sql table as per below screenshot but couldn't able to do it. Can anyone help to update the data as I mention in screenshot.Appreciate you help.Thanks.
    Yellow highlighted columns are source
    Green highlighted columns are target
    Colored data should be update as per source data in sql table.Data is not static as it might have more rows to update and query should be bit dynamic.
    Maruthi...

    You have already asked this question once. You did not get any good answers, because you the information you gave was insufficient. And I'm afraid that the information is still in sufficient.
    Or more exactly, from the example you have given, the answer is: can't be done. And the reason it can't be done, is as I explained in response to you first thread: there is no information in the data to from which we can deduce that Clorox Company
    should be under "Week 1-1,K.B,F". The fact that rows are listed in a certain order in the screenshoot is of no importance, because a table is an unordered object.
    But you said in another post that you have a timestamp column. Maybe that column is usable - maybe it is not. But at least it is a key that you have more columns that the ones you show.
    The best way to get help with this type of problems is to post:
    1) CREATE TABLE statement for your table(s).
    2) INSERT statements with sample data.
    3) The desired result given the sample.
    4) A short description of the actual buisness problem you are trying to solve.
    5) Which version of SQL Server you are using.
    This makes it easy to copy and paste into a query window to develop a tested solution. Screenshots with an insufficient amount of data is not going to help you very much.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Help with Updating Data Fields in Merged Document

    I'm working in InDesign CS5 v7
    I have a multipage report, all using one master page for about 80  seperate records. Each page has their own linked graphs/images.
    We  now have need to alter the source data, and while these alterations can be seen in  'Preview mode' on the Master Page, they are not carrying through  into the pages themselves. No amount of 'Update Data Source' clinking changes this,  and the 'Update Content Data Fields' remains greyed out...
    I really don't want to have to remerge the whole document, as I will loose all of the linked graphs and images.
    Can anyone help?

    You've seen the other thread, so I think you already know the answer...

  • Dataguard - logical standby - need help - not updating data at commit

    Hi
    Need help ?
    We have logical standby setup where data is not updated at standby when committed at Primary. It only updates when alter system swith logfile.
    On Primary:
    log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(online_logfiles,primary_role) db_unique_name=xxStandby'
    On Standby:
    we have already created standby redo logs ( 1+ # redo logs)
    we used ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE NODELAY;
    The data only ships when we do the ALTER SYSTEM SWITCH LOGFILE whereas it should so when data is commited on the primary.
    Is there anything we are missing or need attention.
    Please help
    Thanks you so much

    Yes, I have standby redo logs = ( 1 + # redo logs on the primary) and are of same size.
    I also changed the log_archive_dest_2 setting for valid_for to ALL_LOGFILES, but the performance is still very slow... we are now overr 9 hrs behind the primary.
    log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(ALL_LOGFILES,primary_role) db_unique_name=xxStandby'
    The Logical standby performance reallly not good at all. trying to increase sga/pga more ... hoping this will speed up some
    Paul

  • Urgent help with Updating data

    I have two tables
    D.S of table1 is
    invoice date vendor
    2233 11/1/2003 Microsoft
    2244 11/1/2003 IBM
    2255 11/1/2003 APPLE
    a2233 11/1/2003 PCS
    The primary key is the invoice and vendor.
    This has like 100 rows.
    Then the other table has
    id invoice referno trans1 trans2 trans3
    2233 a1234 20 30 40
    2233 a1345 20 20 20
    2233 a1456 20 10 10
    2233 a1444 10 1 50
    2244 a3333 10 1 20
    2244 a4444 20 1 1
    and so on and this one has thousands od entries
    I need to add a primary key on this table because i do not have one so i added id column in there now i need to update id i.e enter data in that which if with a composite primary key constraint with invoice will have values like 1,2,3,4 like
    id invoice referno trans1 trans2 trans3
    1 2233 a1234 20 30 40
    2 2233 a1345 20 20 20
    3 2233 a1456 20 10 10
    4 2233 a1444 10 1 50
    1 2244 a3333 10 1 20
    2 2244 a4444 20 1 1
    --- and so on
    Can someone tell me a query to update this table field id so that i have data like that and then i can add a composite key constraint on that.
    Thanks
    Ashish

    use this instead:
    declare
    cursor l_cu_rec IS
    select distinct invoice_no from table 1;
    cursor l_cu_rec2(p_invoice_no VARCHAR2) IS
    select rowid as row_id from table2
    where invoice_no=p_invoice_no;
    p NUMBER;
    BEGIN
    for i in l_cu_rec LOOP
    p:= 0;
    for j in l_cu_rec2(i.invoice_no) LOOP
    p:= p+1;
    update table2
    set id=p
    where rowid=j.row_id;
    end loop;
    end loop;
    commit;
    end;
    I hope this will work.

  • Update data with CachedRowSet failed ! Help....

    I can select data from Oracle DBMS with CachedRowSet,However I can't update data with it.
    the Exception is :Cannot determine the table name
    Can anyone help me out with the
    above problem?
    my email is: [email protected]
    my codes are:
    Connection con = ds.getConnection();
    Statement stmt = con.createStatement();
    ResultSet rs = stmt.executeQuery("SELECT * FROM T_XML_TEST");
    CachedRowSet crset = new CachedRowSet();
    crset.populate(rs);
    rs.close();
    stmt.close();
    System.out.println("name");
    while (crset.next()){
    System.out.println(crset.getString("name"));     
    try{
    crset.previous(); // or crset.absolute(4);
    crset.updateString("name","changed");
    crset.updateInt("layer",55);
    crset.updateRow();
    crset.moveToCurrentRow();
    crset.acceptChanges(con);
    catch(Exception e)
    System.out.println("update failed:"+e.getMessage());
    e.printStackTrace();     
    }

    Hey,
    Would you please let me know which JDBC driver you are using?
    Thanks!
    ~Ji

  • How can we update data in LDAP server using PL/SQL.

    Hi,
    How can we update data in LDAP server using PL/SQL program.
    Is there any sample code for refrence.
    Thanks,
    Tarun

    Hi Justin,
    Thanks for your help. You got my correct requirements.
    Tim's example returning all the attributes of current user which is admin user. Please correct me if I am wrong.
    I have the following information:
    the admin user and password,server info , port and ldap_base for admin.
    I have uid and password for regular user, I am trying find the ldap_base for regular user, which may be different from adminuser.
    Please help me.
    Thanks,
    Edited by: james. on Jan 12, 2009 5:39 PM

  • Cannot update data in a demantra worksheet..

    Hello all,
    I am not able to update data in a demantra worksheet - referred to Oracle Metalink
    https://metalink.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(bmDocID=459527.1&bmDocType=PROBLEM&viewingMode=1143&bmDocDsrc=KB&bmDocTitle=Worksheet%20Data%20is%20Not%20Being%20Saved%20to%20the%20Database%20-%20Error%20:%20Update%20Data%20Failed,%20Can't%20Create%20%3Cb%3EW...&from=BOOKMARK))
    DocId= 459527.1
    I have the same error message and I followed the steps exactly but I cannot seem to get rid of the error
    Cannot create Wf process. Update Data id: ....
    I have the components correctly defined, display units seems ok. Not sure why the Update Data is failing somewhere??
    Cheers

    Hey there!
    Make sure you restart web server (tomcat) after any changes you make in the business modeler, and before checking the worksheets. Make sure component has units associated, and series associated too.
    Hope this helps,
    Aaron

  • Update data from cube to cube in BW 3.5

    Dear Experts,
            Can we update data from one cube to another cube in BW 3.5. i tried it, I created the connection between two cubes as i did in ods to cube through update rules but there is no option like in ods to send the data(update dso data to data targets).Please help me on this.

    hi arvind,
           Thanks, but i have some doubt again, i did it and also data transfered to the second cube, but after creating the connection i went to bi7 in infosource and there i found that cube name starting with 8(cube name), but my question is can i do it in bw3.5 without going to rsa1.

  • Update data from ODS to ODS with infopackage selection

    Hi,
    I am trying to update data from one ODS to another ODS with selection criteria in InfoPackage which is created manually.For Full load I can give selection criteria in InfoPackage. When I initialize data Selection is greyed out even selections for Full load exists. Please advise me how to give selections for delta loads from ODS to ODS loads.
    Thanks in advance.
    Ram

    Once you started an ODS as destination in FULL mode from a DS you cannot get back.
    So if you want to update from ODS to ODS using Change Log but considering only some data records you could create an Update Routine with a Start Routine that DELETES undesired records (e.g. DELETE DATA_PACKAGE WHERE ...) and then start an Init-Delta Loading.
    Hope it helps
    GFV

  • Update data in r/3 from webdynpro using bapi

    Hi ,
    i am new to webdynpro.
    i want to update data say sales order in r/3 backend from webdynpro.
    can i have some links for the same.
    i have seen previous forums in following link, but couldn't open.do i need to register to have some extra rights.
    /thread/12846 [original link is broken]
    thanks in advance

    Hi Satya
    In order to update data in R/3 from web dynpro you need to use RFC or BAPI
    The Adaptive Remote Function Call (Adaptive RFC) is a technology that enables the Web Dynpro application developer to use the business functions encapsulated in Business APIs (BAPIs) even after a structure modification, without having to provide the new data using a second back end or a new structure with subsequent regeneration of the proxies.
    Procedure for Importing Adaptive RFC model is as follows
      1. Choose the context menu entry Create Model on the Models node of the relevant Web Dynpro component.
    2. In the model wizard, choose Import Adaptive RFC Model followed by Next.
    3. Make the required entries – for example, to specify where the generated RFC model instances and RFC metadata are to be stored.
    4. In the next wizard window, you enter your user data for the SAP System that contains the BAPIs from which you want to generate the proxies. You use it to log on to the SAP System online.
    To be able to log on to the SAP System, it must be entered in the logon group.
    5.  Next select the BAPIs for which you want to create Java proxies in a generation process. Then choose Next to proceed to the next wizard window.
    6.The import log provides information about the generated model classes, properties, and model relations. Choose Finish to start the generation process.
    Now add this model in "Used Model" for your application
    Now for graphic display you create view,for the progarm control create controller and used this model to retrieve & update data.
    For more information about web dynpro for Java refer
    http://help.sap.com/saphelp_nw2004s/helpdata/en/14/c897427f18d06ae10000000a155106/frameset.htm
    For information about RFC & BAPI
    http://help.sap.com/saphelp_nw2004s/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm
    Regards
    Gauri

  • How to update date in a table from another database

    Hello,
    I am trying to code a way to Update my Testing database from another database. In the coding below the database that has the updated data ends in Restore.
    Use ClientDB_MASTER_Restore
    Truncate Table ClientDB_MASTER_Testing.dbo.Activity_Tracking_AZ
    GO
    SELECT * INTO ClientDB_Master_Testing.dbo.Activity_Tracking_AZ
    FROM Activity_Tracking_AZ
    Go
    I know with this Technique the table must be truncated if not deleted first.  There is probably a better way to do this which I'm very open to.  I'm also looking for coding that will roll back any changes made should an error occur.
      As always, any help is greatly appreciated.
    David92595

    USE ClientDB_MASTER_Testing
    go
    SET XACT_ABORT ON
    BEGIN TRANSACTION
    Truncate Table dbo.Activity_Tracking_AZ
    -- SET IDENTITY_INSERT dbo.Activity_Tracking_AZ ON
    INSERT dbo.Activity_Tracking_AZ (col1, col2, ...)
    SELECT col1, col2,
    FROM ClientDB_MASTER_Restore.dbo.Activity_Tracking_AZ
    -- SET IDENTITY_INSERT dbo.Activity_Tracking_AZ OFF
    COMMIT TRANSACTION
    If you find it boring to type the column lists, just find the table in Object Explorer, and drag the columns node to where you want the column list.
    You need the SET IDENTITY_INSERT command if the table has an IDENTITY column.
    By wrapping the code in a transaction, you are not left with an empty table if the INSERT fails. The command SET XACT_ABORT ON makes sure that the batch is aborted and rolled back in case of an error.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Vendor ID, Last Update Date, Invoice Details - Query

    For each Supplier, we would like to know the vendor ID, vendor number, vendor name, vendor site code, Created Date, Last Update Date, last invoice date, last payment date, total number of invoices and total $ amount of invoices for each supplier.
    1) How do i find the last payment date and supplier catagory?
    2) As i have to use sum(invoice_amount), count(invoice_amount), max(payment_date) which point to 3 different tables, i am not sure how to use "group by" based on the Vendor_id alone while i select lot of fields from different table. Could you please help me with this?
    3) Please help me to get this query fixed.

    1) You can get last_payment_date by joining vendor_id to ap_invoices_all and the joining invoice_id with ap_invoice_payments_all to get the max accounting_date (i.e. last payment date)
    2) You are partially right. Invoice_amount and invoice_count are from the same table so you have to join 2 tables. Best way is to do a select in the select.
    e.g SELECT   pv.vendor_name, COUNT (1), SUM (invoice_amount), pv.vendor_id,
             (SELECT MAX (aipa.accounting_date)
                FROM ap_invoice_payments_all aipa, ap_invoices_all aia2
               WHERE aia2.vendor_id = pv.vendor_id
                 AND aia2.invoice_id = aipa.invoice_id) latest_payment
        FROM ap_invoices_all aia, po_vendors pv
       WHERE aia.vendor_id = pv.vendor_id
    GROUP BY pv.vendor_name, pv.vendor_idSandeep Gandhi

  • How can i update data in okc_k_items and csi_item_instances tables?

    How can i update data in okc_k_items and csi_item_instances tables?
    by EBS .
    Thanks.

    For csi_item_instances table, you can use the following API:
    CSI_ITEM_INSTANCE_PUB.UPDATE_ITEM_INSTANCE
    For okc_k_items, try using the following API:
    OKC_CONTRACT_ITEM_PUB.UPDATE_CONTRACT_ITEM
    Hope this helps!

  • How can I update data fields in a merged document ?

    Hi,
    I'm looking for a way to update the values of data fields in a merged document with a script just as you can do with the user interface.
    I don't find any method like "updateDataFields ()" in the DataMerge object.
    Si I try to invoke the menu action "Update Data Fields", but it fails. The script error message is: "Error 53762, the script is not active." On the contrary, the action works if I use the interface.
    Can anyone help me?
    Thanks in advance,
    FredIsnard
    PS : I work with CS5.5 and JavaScript.

    Hi!
    You might be looking for this one:
    DataMerge.mergeRecords (outputOversetReportFile: File )
    Merges records and produces an optional overset report.
    outputOversetReportFile: Data Type: File
    The path to the file in which to store the overset report. (Optional)
    Best regards,
    Andreas

Maybe you are looking for

  • IHome no longer works with iPhone 4s after iOS 6.1 update.

    My iHome no longer works with iPhone 4s after iOS 6.1 update.  Prompts message 'This accessory is not supported by iPhone'.  Has anyone come accross this and is there a fix?

  • How to delete users from Dev and Testing once it is deleted in Production

    Sap Gurus, Is there any automated way to delete the users from development and testing once it is has been deleted from production. i.e. when the administrator deletes the user from production after logging in then it should automatically delete the

  • FINISH DATE VARIANCE AS OF DATA DATE

    Hello to Everybody, I would like present a tabular report with a column for "Finish Date Variance as of Data Date".... I would appreciate much for your immediate reply. Thanks and Regards, Raymond

  • Shared Object skip intro after first visit

    Hopefully you guys can see something i am missing. I want to skip the intro of the flash movie after the first visit, so the user doesn't have to see the intro to get to the main site. I have the code below on frame 1, an intro flv on frame 2 and the

  • The states of tcl script is loaded

    I develop a tcl script and upload to a router 2811.after loading this script,this script's states is loaded.i think that this script's states is registered is correct. please help me fix this issue.thanks