Help!!! Ipod Nano Frozen on Apple Logo Screen after trying to reset
my ipod nano is frozen on the apple logo screen after i tried reset it....and i think that battery was low when i tried reseting it...anyways please help...i hope if i leave it overnight the apple logo still wont be there
when you did the reset, did you follow these procedures?
Resetting
if the reset didnt work, then do a restore: Restore your iPod
Similar Messages
-
Ipod Nano stuck on apple logo screen
So my little brothers Ipod Nano 4th generation is stuck on the Apple logo screen. I've reset it a couple of times, but it won't leave the apple logo screen. I wasn't able to get it into disk mode, and my laptop wasn't regonizing it, but two days ago our desktop's Itunes recgonized it. Is there anything else I can do, or is it time to take a trip to an Apple Store? Any help would be, well, helpful
but two days ago our desktop's Itunes recgonized it
Since the desktop was able to recognize it, did you restore it in iTunes?
B-rock -
Ipod touch frozen on apple logo screen & restore failed
Help! My ipod touch got frozen on the apple logo screen and i restored it like one website said to do but it didnt work it is still frozen and when i plugged it into my labtop so it could charge and i didnt get that pop up thing that says and apple ipod has been connected please help me i dont have money to buy another one..
Try placing the iPod in recovery mode and then try to restore the iPod via iTunes on the computer. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
My ipod only shows the apple logo and i tryed to reset it
i dont know what to do i keep trying to reset it but nothing happens the logo just shows up again.
See these.
iPod shows only an Apple logo and doesn't start up.
Only the Apple logo appears when turned on. -
Ipod Touch frozen at apple logo screen
I try to turn on or reset my ipod and the apple logo appears and nothing happens. The ipod is not being recognized by itunes either? Any suggestions appreciated.
Thanks,
AugieI have now had this freeze problem on two iPhone 3G's and now my iPod Touch 32 GB.
Here is what you have to do.
Plug your Touch into your computer via the USB cable
Now press both the top switch (sleep/wake) button and the home button at the same time. Hold these two buttons down until the iPod Touch powers down and then continue holding both down until the Apple logo reappears (reboot). As soon as the Apple logo reappears let go of the top button and continue holding the home button down for about 10-15 seconds. You will then get a screen that shows a USB cable to be connected to the iPod Touch (it's already connected). Now the iPOd Touch will mount and via iTunes you will get a message to restore.
Restore takes a while so be patient.
This is a huge headache and the worst of it is that if you have an iPhone you lose the use of the phone itself. If you are out and about you cannot restore so you are without a phone!
Hope this works for those of you having problems. Post here if you still have problems.
Ken -
Ipod touch frozen on apple logo screen
I've seen all the posts about restoring and all that, but I don't want to lose my notes and contacts and stuff. Is there any other way??
Please help. Thank youIt's not jailbroken, and no it won't be recognized. But I was searching around the other discussions here and they say that I should hold the home/power buttons until it turns off then on again, then continue to hold the home buttonuntil itunes recognizes it and tells me to restore.
Are you sure restore won't get rid of my notes? -
My iPod touch got restarted and frozen on the apple logo screen after I erased all content and settings. And it got restarted and frozen again every 5-10 mins until low battery. It also doesn't recognize by iTunes. Did any one has the same problem? And how did you solve it? Thank you.
Try here:
iOS: Not responding or does not turn on -
Ipod classic frozen, showing mains adater screen after reset
ipod classic frozen, showing mains adater screen after reset
when you did the reset, did you follow these procedures?
Resetting
if the reset didnt work, then do a restore: Restore your iPod -
IPod Touch 4g 8gb is frozen on apple logo screen! HELP!!!
I rebooted mt iPod and now it is stuck on the apple logo screen. when i turn it off it turns right back on without me doing anything and it doesn't show up in itunes. i don't know what to do all the youtube videos don't work and i can't even restore it! HELP!!! I HAVE A MAC and IOS 6.1
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
80 GB Ipod frozen at Apple Logo Screen
All I can do with my Ipod is look at the Apple Logo Screen with the backlight lit up. Actually I can manually reset it by holding down Middle button and Menu button. But it turns right back on by itself and get stuck again. Just cant seem to do anything.
see if it helps
http://discussions.apple.com/thread.jspa?threadID=1591975&tstart=0 -
I reset my iPod Touch by pressing both the Home and Sleep/Wake buttons. The Apple logo appeared as expected, but the iPod stayed frozen on this screen. Every so often the screen briefly "flashes" (like it's about to change to the welcome screen) but then it returns to the Apple screen.
I tried letting the iPod run out of power until the low battery icon appeared. When I connect it to either a Mac or a power supply, and once it charges up enough, the Apple logo appears again and it is frozen.
The iPod does not show up in iTunes. It is a 32Gb 2nd gen iPod Touch running 3.12 (I think) and has LOTS of applications.
Any help greatly appreciated!Thank you! The recovery procedure you linked to seems to be working, though it was slightly different for me than on the Apple site.
Specifically, when I held the Home and Sleep/Wake buttons, my iPod would eventually return to the Apple logo screen, rather than turning off. I found that if I held both buttons and waited for the screen to briefly go black, I could release the Sleep Wake button, and connect the iPod to my Mac, while continuing to hold the Home button.
It took a few tries, but eventually I got the iTunes dialog box (about recovery mode) and was then able to restore the iPod to its factory settings.
I am in now the midst of restoring my iPod to its most recent backup, and I'm hopeful that you've solved my problem. Many thanks!! -
My Ipod Nano seems to be stuck on the apple logo. I tried a hard reset and it did nothing and itunes isn't recognizing it. When a similar thing happend to my Ipod Touch i was able to boot into recovery mode and restore a backup. Does Ipod Nano have the same mode?
Hello Elektra2009,
And welcome to Apple Discussions!
I am no guru when it comes to iPod touches, but I do know that nano has no feature like that. However, if you have already tried a hard reset, I would try manually putting the iPod into [Disk Mode|http://support.apple.com/kb/HT1363]. If you can do that, and get iTunes to recognize it, I think it would be an excellent idea to restore as well.
Hope this helps.
B-rock -
My phone is frozen and I can not get it to "Wake up"
Stuck on the black apple logo screen. And my computer and itunes are not responding when I plug it in.
Any ideas?try doing a restart / reset first
http://support.apple.com/kb/ht1430
if this doesn't work
You can try the step here in this link.
http://support.apple.com/kb/ht1808
when you're stuck on the apple logo, the operating iOS doesn't load so itunes could not detect the device -
Ipod 5 stuck on apple logo screen
last night(about 22 hours ago) i tried to update my ipod 5 to ios 8.2 I clicked the install button and then left my ipod on my desk charging. I came back about an hour later and it was stuck on the apple logo screen but with no progress bar. Every minute or so so about 10 minutes it started to glitch out and shut down right when the lock screen would show up. It has been on the apple logo screen since then and i just got back from school to find it stuck. Occasionally it will get a little dimmer, but about a minute later it will be bright again.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod Nano Stuck in Apple Logo
My iPod Nano 3rd gen. stuck in apple logo. I did the reset thing and yes --it reset but will stay in Apple logo. I also tried the disk mode thing --and it did not work. What should I do???
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Maybe you are looking for
-
Please help I keep getting this error message trying to save a photo in photoshop to return to lightroom
-
How to insert two queries in the same workbook in new BI 7.0 Bex web analy
Hi Can you please advise how to insert multiple queries in the same workbook in BI 7.0 web analyser. Sarah
-
Hi Friends I am new to ABAP-HR.I am trying to analyze below peace of code but not yet succeeded till. So any one please illustrates me the below peace of code step-by-step. DATA: is_i77pr LIKE t77pr. DATA: temp1 LIKE result_struc_obj. DATA: temp
-
Non-permitted Aggregates error
Hi...All I need to Vendor Evaluation data to the Cube 0PUR_C02. I have installed the Cube from the Business Content. while Activating the same I got a messages that Some of the KeyFigures of this cube (e.g. 0QA_SCORE_1, 0QA_SCORE_2, 0SHIP_NOT_2 etc)
-
How to see what transform set is in use
A pen test has shown I have crackable transform set on my firewall. I can see the config this relates to and do have higher encryption available. What I dont want to do is remove it until I know my remote sites are not using it. does any one know a c