Help! Just copied iTunes media to second external drive and now have broken links in the original drive??

Hi everyone
I wonder if anyone can offer me some advice to rectify the problems I'm experiencing in my itunes?
I have been saving my media to an external hard drive since rebuilding my itunes collection, while keeping the library on the hard drive of my MBP.  This was working well with no problems but as my media reached 300GB on my external I thought I would copy it to another external hard drive as back up, and after that I decided to also make a copy of my library data to the same second external drive so I would have a full back up of itunes in case of failure of my main hard drive...
So after copying my media from my first external drive to the second, and then copying the library data from my MBP hard drive it seems the copy of my media and the copied library are working fine on my second external hard drive, but now when I open the first external drive where I originally was saving my media files I am suffering quite a lot of broken links???...I followed the copy process as I have done in the past although I did not tick the check box for renaming and moving my media as it was about to be copied,and I thought that was correct as I used the consolidate function to copy it..
Been trying to figure out how to rectify the problem tonight and am getting nowhere fast.  Can anyone offer suggestions as to how I can sort the issue on my original external hard drive as it's the one I prefer to store my media on and it was functioning perfectly before?? from having a tidy and clearly functioning itunes I now have a mass of problems....
I hope this is clear to someone.....as I was hoping to have it fixed in readiness for a new MBP...am I missing something obvious?

OK, this should sort you out...
Move the following files and folders from /Volumes/Backup/iTunes  up to /Volumes/Backup/
Album Artwork (folder)
iTunes Library.itl
iTunes Library Extras.itdb
iTunes Library Genius.itdb
iTunes Library.xml
sentinel (hidden)
Launch iTunes. It should warn that the library is missing. Browse to the file /Volumes/Backup/iTunes Library.itl and open it.
Go to iTunes > Preferences > Advanced and change the media folder location to /Volumes/Backup/Music. Let iTunes consolidate files if it asks, if not use File > Library > Organize Library... Tick Consolidate files and click OK.
Close iTunes. Rename /Volumes/Backup/Music as /Volumes/Backup/iTunes Media. Start iTunes.
Go to iTunes > Preferences > Advanced, check that the media folder location now reads /Volumes/Backup/iTunes Media. If necessary, change and then close and reopen iTunes.
Go to File > Library Organize Library... and, if not greyed out, tick Rearrange files in the folder iTunes Media, then click OK.
Delete /Volumes/Backup/iTunes/iTunes Media which now contains redundant copies.
Move the following files and folders from /Volumes/Backup/ into /Volumes/Backup/iTunes
Album Artwork (folder)
iTunes Media (folder)
iTunes Library.itl
iTunes Library Extras.itdb
iTunes Library Genius.itdb
iTunes Library.xml
sentinel (hidden)
Launch iTunes. It should warn that the library is missing. Browse to the file /Volumes/Backup/iTunes/iTunes Library.itl and open it.
Go to iTunes > Preferences > Advanced, check that the media folder location now reads /Volumes/Backup/iTunes/iTunes Media. If necessary, change and then close and reopen iTunes.
Each time you change something and start iTunes just check that a track will play. If not, close iTunes and undo your last action.
That should be it. You can clone this iTunes folder to any other drive and the clone is a functioning copy of your library.
tt2

Similar Messages

  • HELP: moved library to external HD and now I want it back on original drive

    So here is what I did: All my music is on an external drive. Got a new bigger external drive because the other one is now full. Followed the instructions on apple's website for moving music libraries from one drive to another, consolidated and everything. I decided I do not like new drive so I wanted everything the way it was on the old drive. The music is there, but now all I get are those terrible exclamation points. When I try to play a song, iTunes can't find the song. under prefs, I have the music folder location pointed in the right direction. I am sure there is an easy fix, but for the life of me, I can not figure it out. I know somebody out there has the answer. Thanks.

    my understanding of consolidate is that it COPIES the files to the new, or pointed, location. The files already exist there, and if it does copy the files there again, there will not be enough space. Maybe I don't understand the consolidate function well.

  • HT1751 My win8 pc hard drive failed.  After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator was used).  ITunes does not recognize the back up files - help! (it does show cloud & recently burned m

    My win8 pc hard drive failed.  After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator backup software was used).  ITunes does not recognize these back up files even though the location is the same as cloud & recently burned music that does show- help!  The backup files consist of 34,000+ songs; almost all burned from my own CD collection.  I do have most of the songs on an ipod classic but hesitate to try to restore from that.  Can someone tell me how to get these 34,000 songs to show up in iTunes?  Thanks!!

    This diagram shows how a typical iTunes library ought to be set out (click on it to enlarge)
    The red outline highlights the media folder and its contents, the various subfolders are only created if that kind of content is in your library. The right-hand side shows the files that should be found in the iTunes library folder; sentinel is normally hidden so may not be visible. The core of your iTunes library is the file iTunes Library.itl, you need to restore this, the other library files and the Album Artwork folder, as well as the media folder, to restore your library.
    tt2

  • HT1364 I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive.  What is the best way to install and move the itunes library to my C Drive?

    I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive.  What is the best way to install and move the itunes library to my C Drive?

    If the entire library is on the external drive then simply copy the iTunes folder into <User's Music> on the new computer, then install iTunes. If you've already installed iTunes you will want to remove the empty iTunes folder in <User's Music> first.
    If it turns out you only have the media folder on the external drive then take a look at this post...
    tt2

  • HT1751 I copied my iTunes folder to an external HD and now I cannot delete it. When I try to move it to the trash it displays The item "iTunes" can't be moved to the Trash because it can't be deleted.

    I copied my iTunes folder to an external HD and now I cannot delete it. When I try to move it to the trash it displays: The item “iTunes” can’t be moved to the Trash because it can’t be deleted.

    Close iTunes. Click the icon to start it, then press and hold down the left shift key. Keep holding until asked to choose or create a library. Choose the iTunes folder on your external drive. That should bring back all your playlists, ratings, play counts etc. You may have to settle for removing and reloading the media onto the device again. That's not too bad, but what you don't want to have happen is your apps being removed and reloaded as then you can lose settings and data. If that looks likely backup and then restore the device rather than sync it.
    If for some reason rebuilding the library the way you did has moved files around then the restored library may have trouble finding things. If so post back and I'll explain what to do...
    tt2

  • HT201210 Just updates itunes software on my windows PC and now it won't open because of Runtime error R6034 can you help?

    Just updated itunes software on my windows PC and now it won't open because of Runtime error R6034 can you help?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • HT4623 I have just upgraded my iPhone 4S to OS6.1 and now I cannot link or connect to the App Store

    I have just upgraded my iPhone 4S to OS6.1 and now I cannot link or connect to the App Store, any ideas?

    To do this your device should be firstly connected to computer and iTunes is open. Put your device into dfu mode: 1.turn off your device 2.press and hold power and home button simultaneously for 10 seconds and release power and keep holding home until iTunes says a device in recovery mode. now should be able to restore.

  • HT4623 I have the latest iTunes software on my iMac mini and now have IOS7 on my iPhone and now I cant sync music from my library either by wifi or by usb?

    I have the latest iTunes software on my iMac mini and now have IOS7 on my iPhone and now I cant sync music from my library either by wifi or by usb? I get song lists that scoll at a million miles an hour but no actual content. What should I do to get my music onto my iphone.

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • I recently upgraded to 0S 10.6.8 on mab pro and now have pink lines around the desktop borders. A horrible red colour appears in the background of the screen saver, and in parts of Safari and other applications including MS Office. please help

    I recently upgraded my Macbook Pro to SL OS 10.6.8 and now have pink lines around the desktop borders and some menus. There is also a horrible red colour that appears in the background of photobooth and parts of Safari. The screen saver looks like an alien life form with red in the background. There are odd translucent colours in the background of other applications including MS Office. It looks like a horrible psychedilic trip from the 60's. I ran the upgrade again but nothing changed. Can you help?

    Backup your files off the computer (not TimeMachine) and disconnect.
    Hold c boot off the 10.6 disk, under the Utilities menu > Disk Utiltiy > Repair Disk, and Repair Permissions
    (quit and stop if Disk Repair (only) issues a failure and notify us)
    Quit and install 10.6 again, reboot and Software Update again,  this time download it and then run it. Check Software Update until clear.
    c boot off the 10.6 disk and use Disk Utility >Repair Disk again (fixes a bug)
    Reboot and check any installed programs, some may not function who have installed kext files into OS X, those need to be reinstalled.
    You didn't mention if you upgraded from 10.5 or 10.6.7, the above steps are for fixing a 10.6 to 10.6.8
    If you upgraded from 10.5, you should erase the drive in Disk Utility first, then install 10.6 fresh, but then all your programs will have to be reinstalled or updated from original sources.
    Also the 10.6.3 upgrade disk has no free iLife, but you can install 10.5 fresh then upgrade to 10.6.3, then to 10.6.8 and then all new programs and that will give free iLife that came on the factory 10.5 disks.
    You also can use Pacifist to extract iLife from 10.5 disks.

  • I've just reformatted my pc, reinstalled master collection cs5, and now it won't install the updates it downloaded, do we have any fix for this?

    I've just reformatted my pc, reinstalled master collection cs5, and now it won't install the updates it downloaded, do we have any fix for this?

    you can update manually, http://www.adobe.com/downloads/updates/

  • Moved i tunes and files to external  drive and now have 3000 files???? help

    I moved all files to an external drive and now show all files as seperate how do i find my playlists and also put the items back into i tunes form??? so f#%@ing confused and also the library comes up as a huge dos read file?
    what do I need to do.
    i local to portland free diner to wjo ever helps me out or my wife is going to kill me for severe time lost!~

    Import is just a word for copying photos from the phone to a computer and not that different than what I do in Windows -- although I haven't compared the speed on a large number of photos. If you are importing and using iPhoto, you might try doing it with Image Capture which will allow you to copy them directly to an external drive. It may be faster than doing it to iPhoto but I haven't compared the speed. Instructions from http://support.apple.com/kb/HT4083 are shown below.
    Connect the iOS device to the computer.
    If Image Capture does not open automatically, you can navigate to your Applications folder and open Image Capture from there.
    Choose the location to which you'd like to import pictures.
    Click Options.
    Click the Options tab if it isn't already selected.
    Enable the option "Delete items from camera after downloading".
    Note: Deleting photos after importing helps to reduce Camera Roll size, and it improves backup and restore times. You may choose Keep Photos if you wish to import the photos to additional computers.
    Click OK.
    Click Download All.

  • When I open iTunes on my new computer using the .itl file, and using the same external drive holding the songs, all of the songs I added to iTunes up to a certain date have broken links, while none of the songs have broken links on the old computer.

    I want to open the  iTunes library on my new laptop with all the playlists and stuff I built on the old computer. I have all my music on an external drive. I have copied the .itl file from the old computer and opened it on the laptop, and it has all the playlists, but all of the songs that were added to iTunes up to a certain date have broken links. What am I doing wrong?

    Moving library files around while leaving the data in the same place usually presents no problems. Moving the data around independently from the library usually breaks things. With Windows machines all you should need to do is make sure that the same drive letter is being used on the new system as with the old. If that is not possible you need to get your library into a portable layout before moving it between systems.
    Typical layout of iTunes folders:
    When the media folder is inside the main iTunes folder as shown above then the library is portable. Typically with a split library the iTunes Music or iTunes Media folder (everything inside the red outline) is moved to a different drive by choosing a new locaton for it and then consolidating.
    To make the library portable again you need to copy the library files and album artwork folder into the parent folder of the media folder so that the nested relationship is recreated. (BTW If your media isn't already inside your designated media folder then you will also need to consolidate the files that are outside of it, before you copy the library files.) You can then use the hold-down-shift-when-starting-iTunes method to open the library file in that parent folder. Once the library has been opened, tested and closed you are most of the way there.
    The iTunes window inherits its title from the folder holding the library files so, unless you created a folder called iTunes to hold the media folder, iTunes may now have an unexpected title when you run it. The parent folder can be renamed as iTunes, and the library opened again. Alternatively, if the parent folder is at the root of the drive, or has other data which you wish to leave in place, you can create a new top level folder called iTunes and move the library files, album artwork and media folders into it before opening and testing the library again.
    If the library doesn't work after any step simply reverse it by undoing a move or rename or opening the previous set iTunes Library.itl file.
    If all has gone well then the library is now portable. Once you've migrated the data to a new system you can copy the library files back to their usual internal location if you find that having them on the external drive affects performance...
    tt2

  • Help with transferring ITunes media files to external HD

    Hi!
    I'm trying to free up space on my MacBook by moving all my ITunes media files to an external HD.
    I followed the support instructions which told me to go to ITunes preferences, advanced, and choose a new location for the files. I did that part and files were copied across to the external HD. However, the next step is to move the original files from my macbook into the trash. I've gone to home/music/Itunes to delete the originals, but they don't seem to be exactly the same as the ones copied across to the eternal HD..? For instance, the size of the ITunes folder is different, and inside the folder some files are not there, and all the music is not there either (in the external HD copied location).
    I'd just like to know I'm going to be deleting the right files before I do it, so if anyone can help that would be really appreciated.

    For instance, the size of the ITunes folder is different, and inside the folder some files are not there, and all the music is not there either (in the external HD copied location).
    Then the first thing to do would be to consolidate your new iTunes library as well: Open your new iTunes Library in iTunes and
    Open iTunes Preferences:
    Mac: Choose iTunes > Preferences.
    Click Advanced.
    Make sure the option to "Copy files to iTunes Media folder when adding to library" is selected.
    Click OK.
    Choose File > Library > Organize Library.
    Then check if now your music is included in your new Library.
    To see where iTunes stores a song, select the song in the iTunes Browser and control-click (or right-click) it and from the pop up menu select "Show in Finder".
    If you see that the songs are inside the new Library, you can delete them from your old library.
    The structure of your Library depends on your iTunes Version, so I can't tell you where to look - please post the version of iTunes you are using and the OS:

  • Have a mac mini. Just got a external HD. I want to store my itunes media on my external HD and play back on Windows XP laptop. My laptop does not recognize the HD. Only recognizes the empty partition I created on my mac when I partition the drive. What's

    I have a mac mini-snow leopard. I recently bought an external HD. I want to use part of the HD to back up my mac via Time Machine. The other part I want to use to store my Itunes and other media such as movies with VLC so that I can take the HD and play it back thru my windows XP laptop. The problem is that my laptop does not see the part of the external drive that has my mac info stored on it. Only sees the drive ( as drive E ) with zero data that was created by me when I partitioned it on my mac. I partitioned the drive in two. One partitioned under GUID for mac. The other part under exfat for windows. Any suggestions on why my XP laptop cannot view the mac info on the HD. Thanks.

    DBG413 wrote:
    Any suggestions on why my XP laptop cannot view the mac info on the HD. 
    you'll have to install e.g. MacDrive or HFS+ for Windows on your winsloth machine.

  • I have just updated iTunes on to my MacBook Pro and now it will not open iTunes at all and I need to plug my new iPhone to it but i can't???

    Updated my iTunes to the recent one and now it will not open on my MacBook Pro, got a new iPhone so tried to connect it and said i needed the new iTunes (which i did) and now i can't start my phone as i can't open iTunes which means i can't access anything on my phone!!?? HELP???????

    You supply little pertinent about the MBP and the iPhone.
    First... on the MBP... Click on the Apple icon.. Top left in Finder...
     > About this Mac > Version...what does it say?
    Which iPhone and what is its' iOS Version.

Maybe you are looking for

  • DMS Originals

    Hi I'm hoping someone can help me. I've read through hundred's of posts now and spent all day trying to solve this issue.  I know it's something stupid I'm missing but just can't find it......... I have two Document Types SPC (Specifications) and HAS

  • Re: how can i transmit live video that is captured by a usb webcam with rtp

    oh,my oicq number is:282987147 Anyone can leave a message to me. Thanks a lot !

  • ITunes Sharing With Windows 7 Starter

    I have 3 computers in my home. 2 run XP, 1 runs Windows 7 starter. All 3 have iTunes on them. I have sharing turned on for all of them. The 2 XP computers have no problem sharing a library. The 7 Starter netbook shows the library, but when I click on

  • Not sure on how to return a new object

    hi i am not sure on how to return a new Set object, i am not asking how to code this, i just don't exactly know what to write after "return.." to return a new object ...that part of the code is towards the bottom where i put arrows.....this is the sk

  • Pro with Parallels ... keypads and numbers

    I use Parallels (latest release candidate is working very well) to run Autocad and Rhino on my Mac Pro. But I cannot use the number pad on my apple bluetooth keyboard when in parallels. Anyone cracked this? [I know some will consider this not a Mac P