Help! Kernel_task more than 300% of CPU and extremely laggy
Hi, I am using MacBook Pro 13 inch Early 2011 and using OS X 10.9.2 Mavericks
It has been a few days that my computer was running extremely slow and I need to hold the power button for 10 seconds for it to boot (if i press it once the white power light on the mac body would only light for a while then turns off again)
I did not know what triggered it, it was just like thay when i tried booting by mac
I checked activity monitor and the kernel_task was actually taking up more than 300% of my cpu!
I googled for answers but I can't find any. Is it due to third party software?
Furthermore, when I safe boot the kernel_task would actually be low and the speed will revert back to normal.
Please help me
Thank you
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/r:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\) \\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print($2,$3,a[n],$1)|p;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
Similar Messages
-
When ever i try to use FaceTime or Counter Strike GO my CPU gets more than 250% usage and my mac gets really slow.. This is the same when ever i try to run any middle end applications not extreme ones. Tried googling and apple support communities uninstalled all my 3rd party softwares. any help??
The kernel is using excessive processor cycles. Below is a partial list of causes for this condition.
Thermal overload
This can be due to accumulation of dust, high ambient temperature, or to the malfunction of a cooling fan or temperature sensor. The kernel tries to compensate by throttling back the CPU's. You might see messages like the following in the Console window:
SMC::smcHandleInterruptEvent WARNING status=0x0 (0x40 not set) notif=0x0
The timestamps of those messages (if any) indicate the times, since the log was last cleared, when a processor was being throttled because of high temperature.
Note that if the problem is caused by a faulty sensor that reads too high, there may be no actual overheating.
The Apple Hardware Test, though not very reliable, is sometimes able to detect a bad fan or temperature sensor.
Using Apple Hardware Test
Encryption
Transferring large amounts of data to or from an encrypted disk image or FileVault volume puts an extra load on the kernel. If both the source and the destination are encrypted, the load may be doubled. If you transfer data from an encrypted disk image on an encrypted partition to another such image on another encrypted partition, the load may be quadrupled.
This issue probably doesn't affect late-model Macs with an Intel i-series, recent Xeon, or later processor. Those processors support hardware-accelerated encryption. You can determine what kind of processor you have by selectingAbout This Mac from the Apple menu in the menu bar.
Installed software
User-installed software that includes a device driver or other kernel code may thrash the kernel. Some system-monitoring applications, such as "iStat," can also contribute to the problem. You can test for this possibility bycompletely disabling or removing the software according to the developer's instructions, or booting in safe mode (with the shift key held down at the startup chime.) Note, however, that disabling a system modification without removing it or booting in safe mode may not be as easy as you think it is.
Corrupt NVRAM or SMC data
In some cases the issue has reportedly been resolved by resetting the NVRAM or the SMC. -
I have more than 300 CDs that I have downloaded to my computer and have purchased hundreds of songs from the iTunes store on my Mac. I cannot play any of this music now. How can I restore my iTunes library? I can see the music files, but they will not play. The message I get is that the file cannot be found. I have stopped purchasing any music from iTunes, and will not do so in the future unless this can be resolved. Why buy music if in the future you can't play it? I have not connected my ipod to my computer for months because of concerns that my music will disappear from there too.
What you see in iTunes is not the music but a pointer to the file that contains the music. Somehow these pointers have become broken. You may have accidentally deleted the file, or moved a folder, or moved a file, or renamed a folder, or renamed a file, or... iTunes is very unforgiving of you doing things to the iTunes folder unless you have it set so iTunes does not manage your music for you (in which case you really need to know how iTunes works)
If all your links are broken, or a large number are, then there are various options, none of them easy (unless you're lucky). One is when it asks you if you want to find the file that you say yes and then guide it to the file (which will probably be in a folder by artist, and then a folder by album name). Gets old fast if you have 300 CDs. Another is to undo what may have caused the links to become broken, if you can remember what it was that you might have done such as renaming a folder. Another is to just forget about your old library, ratings, and playlists, etc. and start afresh. Trash the library file in your iTunes folder, start iTunes with a blank library, then drag all your files to the new library. Another is to restore itunes from a backup you may have made before this happened.
Do you keep just media on an external drive? If you start iTunes without the external being switched on then it thinks the links are bad. Quit iTunes and start the external before restarting iTunes. You may have to scroll down through the tracks to "tickle" them into re-reading the link.
How do you have itunes set in preferences to manage your music? Have you done any changes to preferences recently, or moving folders, files, etc? Do you keep iTunes on an internal drive, or external?
In the many years of people complaining about broken links I don't think any way has been developed to mend them automatically. I saw one attempt to use Spotlight, but it didn't really work.
None of us work for Apple so it's up to you if you won't buy from them until it is fixed. We will try to help you fix it, because we're nice. -
I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi
Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
My trip pics are more than 30 days old and my icloud photo sharing was turned off. How can I now share them to my PC for saving/printing? My sharing is now turned on but it's not loading them? Help?
That list includes all the apps that you installed to your device directly from iTunes on the computer, or which were purchased on the iOS device and subsequently transferred to iTunes on the computer.
If you right click on any item in that list and choose "Show in Windows Explorer" it will open your iTunes application installer directory on your computer, which should be:
C:\Users\User\Music\iTunes\iTunes Media\Mobile Applications
In there are all your saved application installers (*.ipa files). You need to delete those actual installer bundles and then make sure to NOT allow the "transfer purchased content" when you sync or backup in iTunes (as that will just put them back on your hard drive).
One caveat to removing those, is that if you ever wish to keep a specific release of a particular app, and the developer replaces the iTunes/App store version with something else, your sole source for your older version will be your own stored copy of it. So for example, when PDF expert released their iOS 7 update, and charged everyone full price for it, if you wished to keep using the previous version on your own devices, then you needed to keep a copy of the installer on your own computer as that older version is no longer available in the store front. -
Script logic record more than 300,000 record
Hi Expert,
When I run my logic I have error in my formula log:
(More than 300,000 records. Details are not being logged)
Ignoring Status
Posting ok
I check my script it pull out total 422076 records.
Is it meaning I cannot More than 300,000 records??
Is there any where I can set MAX records I can generate for my single script to run??
Thanks..You should use
*XDIM_MAXMEMBERS dimension = numberOfMembers to be processed at a time
For example
*XDIM_MAXMEMBERS Entity = 50
Figure out wich dimension has the most members, and use it, this sections you script logic.
I hope that helps
Leandro Brasil -
IChatAgent takes more than 100% of CPU
The iChatAgent takes more than 100% of CPU. It works normally for 10-15min with little CPU usage but then takes 100% of CPU and stays like that until I quit/kill the process. I tried waiting for hours to see it might go down is usage, but no, and the cpu fan remains on continuously.
I simply use it for text based chatting, and have disabled audio, video,microphone etc, and still this behavior that I can't use it for more than 15min.
Here is the iChat version: Version 5.0.3 (745)
Macbook Pro/10.6.4/Intel Core i7
I have tried removing ~/Library/preferences/com.apple.iChatAgent.plist as suggested elsewhere, and that hasn't helped either.Thanks again Ralph.
No, I do not have any add-ons, just out-of-the-box ichat without any audio, video in use.
At this stage unfortunately, I can't continue using iChat as it hogs up the CPU in less than 15min. And that I do not experience any problem with other chat-clients such as AIM or jabber, so switching over to those until there is a resolution.
Suhas
Here is a process-inspection done through ActivityMonitor when it was taking 100%:
Sampling process 517 for 3 seconds with 1 millisecond of run time between samples
Sampling completed, processing symbols...
Analysis of sampling iChatAgent (pid 517) every 1 millisecond
Call graph:
2457 Thread_7542 DispatchQueue_1: com.apple.main-thread (serial)
2457 start
2457 main
2454 -[NSRunLoop(NSRunLoop) run]
2439 -[NSRunLoop(NSRunLoop) runMode:beforeDate:]
2160 CFRunLoopRunSpecific
2087 __CFRunLoopRun
670 machport_insertmember
662 mach_msg
661 machmsgtrap
1 mach_msg
5 machport_insertmember
3 migget_replyport
596 machport_extractmember
589 mach_msg
577 machmsgtrap
12 mach_msg
4 machport_extractmember
3 migget_replyport
389 mach_msg
371 machmsgtrap
18 mach_msg
355 __CFRunLoopDoSources0
237 _MessageAvailable(void*)
110 XprtGetMessage
106 XPRT::InternalGetMessage(void*, unsigned int&, void*&, void*&, bool)
39 XPRT::TMessageQueue::GetMessage(bool)
14 XPRT::TPtrList::RemoveHead()
7 XPRT::TList<void*, XPRT::TDynamicTraits>::FreeNode(XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*)
6 XPRT::TList<void*, XPRT::TDynamicTraits>::FreeNode(XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*)
1 XPRT::TDynamicTraits::VOrphanElement(void*) const
7 XPRT::TPtrList::RemoveHead()
11 pthreadmutexunlock
8 pthreadmutexlock
4 spinlock
2 OSSpinLockUnlock
2 pthreadmutexlock
3 XPRT::TMessageQueue::GetMessage(bool)
3 _spinlock
31 free
20 szone_size
11 free
24 szonefree_definitesize
23 szonefree_definitesize
1 spinlock
5 XPRT::InternalGetMessage(void*, unsigned int&, void*&, void*&, bool)
5 operator delete(void*)
1 XPRT::TCritSec::Unlock()
1 _spinlock
2 XprtTlsGetValue
2 pthread_getspecific
110 XprtGiveMessage
85 COOL::TSocket::SocketMessageProc(unsigned int, void*, void*)
50 XprtPostMessage
48 XPRT::InternalPostMessage(void*, unsigned int, void*, void*)
25 operator new(unsigned long)
21 malloc
18 malloczonemalloc
10 szonemalloc_shouldclear
6 szonemalloc_shouldclear
4 _cpunumber
5 malloczonemalloc
2 _spinlock
1 szone_malloc
3 malloc
4 operator new(unsigned long)
10 XPRT::TMessageQueue::PostMessage(XPRT::SMessage*)
5 XPRT::TPtrList::AddTail(void*)
4 XPRT::TList<void*, XPRT::TDynamicTraits>::NewNode(void*, XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*, XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*)
1 XPRT::TPtrList::AddTail(void*)
4 pthreadmutexlock
1 _spinlock
6 pthreadmutexunlock
5 pthreadmutexunlock
1 spinlock
2 XPRT::InternalPostMessage(void*, unsigned int, void*, void*)
2 _spinlock
1 XPRT::TCritSec::Lock()
1 dyldstub__spinlock
1 dyldstub__spinunlock
2 XprtPostMessage
14 COOL::TSocket::FireDataAvailable()
13 COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*)
6 XPTL::CComObject<COOL::TProxiedSocket>::AddRef()
5 XPTL::CComObject<COOL::TProxiedSocket>::Release()
2 COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*)
1 COOL::TSocket::FireDataAvailable()
7 non-virtual thunk to COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*)
6 COOL::TSocket::SocketMessageProc(unsigned int, void*, void*)
6 XPRT::TPtrFromPtrMap::Lookup(void*, void*&) const
6 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
3 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
2 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
1 XPRT::TDynamicKeyTraits::VHashKey(void const*) const
3 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
2 XPTL::CComObject<COOL::TSocket>::AddRef()
17 XPRT::TMessageMap::Lookup(unsigned int)
7 XPRT::TPtrFromPtrMap::Lookup(void*, void*&) const
5 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
4 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
3 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const
1 XPRT::TDynamicKeyTraits::VHashKey(void const*) const
1 XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::Lookup(void*, void*&) const
2 XPRT::TPtrFromPtrMap::Lookup(void*, void*&) const
3 _spinlock
3 pthreadmutexunlock
2 XPRT::TMessageMap::Lookup(unsigned int)
2 pthreadmutexlock
1 OSSpinLockUnlock
1 pthreadmutexlock
8 XprtGiveMessage
6 _MessageAvailable(void*)
4 CFRunLoopSourceSignal
3 CFRunLoopSourceSignal
1 spinlock
4 _IMWillLog
2 _spinlock
1 OSSpinLockUnlock
85 CFSetApplyFunction
84 CFBasicHashApply
40 CFBasicHashGetBucket
28 _CFSetApplyFunction_block_invoke1
20 __CFRunLoopCollectSources0
12 __CFRunLoopCollectSources0
4 CFRetain
3 _CFRetain
1 OSAtomicCompareAndSwap32Barrier
1 _compare_andswap32
8 _CFSetApplyFunction_block_invoke1
16 CFBasicHashApply
1 CFSetApplyFunction
16 __CFRunLoopDoSources0
4 CFRelease
3 _CFRelease
2 CFGetTypeID
2 dyldstubOSAtomicCompareAndSwap32Barrier
2 dyldstub_IMWillLog
1 CFBasicHashGetCount
1 CFSetGetCount
1 OSAtomicCompareAndSwap32Barrier
1 _compare_andswap32
1 OSSpinLockUnlock
29 CFSetContainsValue
25 CFBasicHashGetCountOfKey
25 _CFBasicHashFindBucket1
13 _CFBasicHashFindBucket1
10 __CFStringHash
1 CFHash
1 __CFBasicHashStandardCallback
4 CFSetContainsValue
24 __CFRunLoopRun
9 _spinlock
5 dispatch_get_main_queue_port4CF
3 CFRunLoopGetMain
2 OSSpinLockUnlock
2 dyldstubOSSpinLockLock
1 dyldstub_mach_msgtrap
1 pthread_getspecific
1 pthreadmainnp
36 __CFRunLoopFindMode
31 CFSetGetValue
30 CFBasicHashFindBucket
29 _CFBasicHashFindBucket1
9 __CFStringHash
8 _CFBasicHashFindBucket1
6 CFHash
5 __CFBasicHashStandardCallback
3 CFEqual
2 __CFBasicHashStandardCallback
1 __CFRunLoopModeHash
1 CFBasicHashFindBucket
1 CFSetGetValue
2 __bzero
2 memset
1 __CFRunLoopFindMode
17 __CFRunLoopModeIsEmpty
17 CFSetContainsValue
17 CFBasicHashGetCountOfKey
17 _CFBasicHashFindBucket1
12 __CFStringHash
5 _CFBasicHashFindBucket1
8 CFRunLoopRunSpecific
7 _spinlock
2 spinlock
2 dyldstub_machmsg
1 dyldstubOSSpinLockUnlock
121 _CFRunLoopFinished
80 __CFRunLoopFindMode
66 CFSetGetValue
63 CFBasicHashFindBucket
57 _CFBasicHashFindBucket1
22 __CFBasicHashStandardCallback
16 CFEqual
14 CFEqual
2 __CFRunLoopModeEqual
6 __CFBasicHashStandardCallback
17 _CFBasicHashFindBucket1
9 __CFStringHash
6 CFHash
3 __CFRunLoopModeHash
5 CFBasicHashFindBucket
1 __CFBasicHashStandardCallback
3 CFSetGetValue
6 __bzero
5 __CFRunLoopFindMode
2 memset
1 _CFRuntimeSetInstanceTypeID
29 __CFRunLoopModeIsEmpty
19 CFSetContainsValue
14 CFBasicHashGetCountOfKey
13 _CFBasicHashFindBucket1
7 __CFStringHash
3 _CFBasicHashFindBucket1
2 __CFBasicHashStandardCallback
1 CFHash
1 CFBasicHashGetCountOfKey
5 CFSetContainsValue
6 pthreadmainnp
2 pthread_getspecific
1 CFRunLoopGetMain
1 __CFRunLoopModeIsEmpty
6 _CFRunLoopFinished
2 OSSpinLockUnlock
2 _spinlock
2 dyldstub_pthread_mainnp
39 _CFAutoreleasePoolPop
23 _CFAutoreleasePoolPop
7 pthread_setspecific
3 pthread_getspecific
2 objcgetFreedObjectClass
2 objc_collectingEnabled
2 pthread_self
29 -[NSCFString isEqual:]
11 -[NSCFString isEqual:]
8 CFStringGetCStringPtr
4 object_getClass
3 objcmsgSendvtable2
2 _CFStringGetLength2
1 NSClassFromObject
28 CFAbsoluteTimeGetCurrent
21 gettimeofday
18 __gettimeofday
12 __nanotime
6 __gettimeofday
3 gettimeofday
7 CFAbsoluteTimeGetCurrent
17 _CFAutoreleasePoolPush
8 pthread_setspecific
7 _CFAutoreleasePoolPush
2 objc_collectingEnabled
13 -[NSRunLoop(NSRunLoop) runMode:beforeDate:]
6 NSPopAutoreleasePool
2 NSPopAutoreleasePool
2 _CFExecutableLinkedOnOrAfter
2 objc_collectingEnabled
5 _spinlock
4 objc_msgSend
3 dyldstub_CFStringGetLength2
3 dyldstub_pthreadsetspecific
2 CFRunLoopRunInMode
2 CFRunLoopGetCurrent
2 dyldstubCFStringGetCStringPtr
2 dyldstubOSSpinLockUnlock
1 dyldstub__objcgetFreedObjectClass
1 dyldstubgettimeofday
1 dyldstub_objccollectingEnabled
1 dyldstub_pthreadgetspecific
1 objcmsgSendvtable12
9 objc_msgSend
3 -[NSRunLoop(NSRunLoop) run]
1 +[NSDate distantFuture]
1 CFRunLoopRunInMode
1 NSPushAutoreleasePool
3 dyldstub_objcmsgSend
2457 Thread_7543 DispatchQueue_2: com.apple.libdispatch-manager (serial)
2457 start_wqthread
2457 pthreadwqthread
2457 dispatch_workerthread2
2457 dispatch_queueinvoke
2457 dispatch_mgrinvoke
2457 kevent
2457 Thread_7553
2457 thread_start
2457 pthreadstart
2457 XPRT::_ThreadProc(void*)
2457 XPRT::TTimer::ThreadProc(void*)
2457 XPRT::TCondVar::Wait(int)
2457 pthread_condwait
2457 _semwaitsignal
2457 Thread_7554
2457 thread_start
2457 pthreadstart
2457 XPRT::_ThreadProc(void*)
2457 COOL::TSocket::SocketThreadProc(void*)
2457 select$DARWIN_EXTSN
Total number in stack (recursive counted multiple, when >=5):
11 _spinlock
6 OSSpinLockUnlock
5 __CFBasicHashStandardCallback
5 __CFStringHash
5 _CFBasicHashFindBucket1
5 spinlock
Sort by top of stack, same collapsed (when >= 5):
_semwaitsignal 2457
kevent 2457
select$DARWIN_EXTSN 2457
machmsgtrap 1609
__CFStringHash 47
_CFBasicHashFindBucket1 46
CFBasicHashGetBucket 40
_spinlock 37
mach_msg 31
__CFRunLoopRun 24
_CFAutoreleasePoolPop 23
szonefree_definitesize 23
szone_size 20
pthreadmutexunlock 19
CFEqual 17
CFBasicHashApply 16
__CFRunLoopDoSources0 16
pthread_setspecific 15
CFHash 14
-[NSRunLoop(NSRunLoop) runMode:beforeDate:] 13
objc_msgSend 13
__CFBasicHashStandardCallback 12
__CFRunLoopCollectSources0 12
__nanotime 12
-[NSCFString isEqual:] 11
free 11
CFSetContainsValue 9
OSSpinLockUnlock 9
spinlock 9
CFRunLoopRunSpecific 8
CFStringGetCStringPtr 8
XprtGiveMessage 8
_CFSetApplyFunction_block_invoke1 8
__bzero 8
pthread_getspecific 8
CFAbsoluteTimeGetCurrent 7
XPRT::TPtrList::RemoveHead() 7
_CFAutoreleasePoolPush 7
non-virtual thunk to COOL::TProxiedSocket::OnDataAvailable(IInputStream*, IUnknown*) 7
pthreadmainnp 7
pthreadmutexlock 7
CFBasicHashFindBucket 6
COOL::TSocket::SocketMessageProc(unsigned int, void*, void*) 6
XPRT::TList<void*, XPRT::TDynamicTraits>::FreeNode(XPRT::TList<void*, XPRT::TDynamicTraits>::TNode*) 6
XPTL::CComObject<COOL::TProxiedSocket>::AddRef() 6
_CFRunLoopFinished 6
_MessageAvailable(void*) 6
__CFRunLoopFindMode 6
__gettimeofday 6
migget_replyport 6
objc_collectingEnabled 6
szonemalloc_shouldclear 6
XPRT::InternalGetMessage(void*, unsigned int&, void*&, void*&, bool) 5
XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::GetNode(void*, unsigned int&, unsigned int&, XPRT::TMap<void*, void*, XPRT::TDynamicKeyTraits, XPRT::TDynamicTraits>::TNode*&) const 5
XPTL::CComObject<COOL::TProxiedSocket>::Release() 5
dispatch_get_main_queue_port4CF 5
machport_insertmember 5
malloczonemalloc 5
operator delete(void*) 5
Sample analysis of process 517 written to file /dev/stdout -
Why can't I download more than 300-400 songs on my ZenXtra 60 gig at a ti
Ever since I updated to the lastest firmware I cannot download more than 300-400 songs without it crashing? What happened in this update to cause this? It really bugs me I used to be able to set up 000+ downloads and walk away. I talked to Creative's support and they really didn't give me a legitimate reason for this. I think this new "Play for Sure" technology or whatever it bloody is...is the culprit. I want my Zen back the way it used to be, what can I do? Anybody?
In a word, yes PlayForSure is not great and wonderfully stable for all concerned. Have a look here in the Zen FAQ at Nomadness.net for troubleshooting help.
-
i need help
i recently bought ddr333 for my msi 845 ultra-c i cant get more than 150 for mem speed , and thats when i overclock
any solutions
;( :(I heard that we have to do some settings in psappserv.cfg file to get more than 300 rows in a search. Is that true?
Please help me.
Thank you,
Bye. -
How to get more than 300 results for a search
Hi all,
When we search for something in a peoplesoft, we get 300 default results right.
Is there a way we can change that to 500 or 600 or any.
Please help me.
Thank you,
Bye.I heard that we have to do some settings in psappserv.cfg file to get more than 300 rows in a search. Is that true?
Please help me.
Thank you,
Bye. -
I have more than one apple id and need to coordinate them
I have more than one Apple ID and cant coordinate them over my devices
That's correct. They cannot be merged nor terminated. You can stop using them. Note that anything you purchased (free or paid) is permanently connected with the Apple ID used to purchase those items. Only Apple has the ability to make those changes, so you would need to ask them for help.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes. -
Following Artists Does Not Display More Than 300 Entries.
Hello, This has been an issue for a long time now, with the web player. The Artists List, Following, etc. do not show more than 300 entries.I follow something 800+, and can't see over half of my 'music collection' on this service. Please for the love of everything; Remove the limit on the scrolling feeds with add more bands as you scroll. I am also becoming quite irate this isn't even being acknowledged. I've had no success in email exchange with support either. Once I told them I am a developer by profession, and have built similar feeds for various sites, they stopped the BS, and flat out ended the exchange. I don't understand.If you want to get my sub $, I want this to work properly. Thanks,
Any progress on this? Still an issue.What is the point of following artists if you cap the display number. I've built these infinite feeds myself, admittedly not in flash, rather json etc. and this should be pretty easy to fix. I'd like to be able to see all the artists I follow, not less than half. Thanks.
-
How to create Search Help using more than 1 table
Hi all,
I need to create a search help using more than 1 table.
Eq:- Itable1 contains the data and Table2 contains the description of a field.
In my search help i require A field from Table1 and For the corresponding field description from Table2.Hi,
You can do this with the help of collective search help.
Collective search helps:- Combination of elementary search helps. When we need to fetch data based on multiple selection criteriau2019s. More than one tables are Selection from multiple tables
Steps for creating collective search help.
1) Enter the search help name and click on create.
2) Choose Collective search help radio button option as the search help type.
3) Enter the search help parameters.
Note that there is no selection method to be entered for a collective search help.
4) Instead of the selection method, we enter the included search helps for the collective search help.
5)We need to assign parameters for each of the included search helps.
6) Complete the parameter assignment by clicking on the push button.
7) Collective search help offers the user to obtain F4 help using any of the included search helps.
Hope this will help you:
Reagrds:
Alok -
I have 2 problems with Mail. I cannot address an email to more than one recipient. And I receive some emails more than once. Can you please help?
Restart your Mac. See if that makes a difference.
-
Upload more than 300 record by Standard Batch / Direc input 'Financial documents'
Dears Experts ,
i have a problem to upload more than 300 record by lsmw i have created Standard Batch / Direc input
with object 0100Financial documents
program name RFBIBL00
when upload more than 300 record it will display " no batch input data " and didn't save the document .Hi,
Please let us know what Data Transfer Type you are using. Kindly try to run program RFBIBL00 with "Call Transaction" or "Direct Input" for Data Transfer Type as suggested in the program documentation.
Regards,
Anand Raichura
Maybe you are looking for
-
I log-in to webmail. frontier.com and go to my inbox. I have no trouble reading my email but I cannot reply or forward. When I try to do either I get a screen that first has a Skype help page then goes blank. It says done on the bottom but there is n
-
E-Recruitment (300) WF in ECC5.0 (640)
G'day all, Can anyone provide advice around the set up required to get the standard WFs for Processing an E-Rec Requisition working (WS51800008)? My E-Rec consultant believes they have set up everything necessary. The basis boys believe they have mai
-
How to add three batches for a single material during vendor return through
Dear All, We have to sent back some stock to vendor through MBRL.This stock consist of two batches.But during MBRL i could able to enter only one batch.How can i give more batches in this screen. Please give the inputs. Thanks and regards, deepti
-
Hiding the #error message from a member column
Hey guys, The issue is mainly the member formula column showing the basic #error message in the cell upon intentionally messing with the values. It's pretty natural, but I'm looking to hide that error message, though I forgot how. I'm sure it's prett
-
New Safari 2.0.3 displays some Router Firmware pages as HTML Source text
Hello Safari users and gurus. I installed the new 10.4.4 Combo Updater yesterday, preceded and followed by permissions repairs and other maintenance, including cleaning Safari Caches. Safari 2.0.3 works. My problem: 10.4.4's new Safari 2.0.3 displa