Help me figure this out, if you can...
The players:
B&W G3/350, 576M RAM. 10.2.8 CD-R/RW
iBook G3/800, 256M RAM, 10.3.9 DVD/CD-R/RW
Want to put 10.3.9 on B&W. No DVD drive, so I figure "Hey, I'll do a FIrewire Target Disk" thing, use the wife's iBook to do the install, get it out the door" (it's my MIL's, the B&W...).
No go. Can't get the B&W to boot in TD mode, no matter how I try.
****, I even tried a crossover ethernet cable, thinking I might be able to do something with that. No go.
What am I missing, here? Probably something simple.
Hi Dave!
As Duane stated, the Full Retail Version of Panther, is only on CDs that look like THESE.
Any other discs won't work. More info here Tip:Using OS X Install CDs/DVDs On Multiple Macs.
I'm not referring to the Legal aspect of the info there.
Good Luck!
ali b
Similar Messages
-
Hi, My iMovie program stops responding upon opening. I can't figure it out. I haven't really used it in the past but I would like to start. My Mac is one of those aluminum Macbooks that look like a macbook pro and were on the market for a little bit. I'm running OS 10.5.8 and its on the most recent update for the operating system. I don't know how to correct the glitch. Any help would be great! Thanks
-EOK, you have iMovie 08, which is also known is iMovie Version 7.1.4. It has been a few years since i used this version, so this is based on memory.
The only components you must have in the Library/QuickTime folder are the AppleIntermediateCodec.component and the AppleMPEG2Codec.component.
All the others could potentially be causing problems. I would drag the DivX components, the Flip4Mac components, and the Google Camera components to the Desktop temporarily, so nothing is left in this folder except the two Apple components.
Then restart your Mac and start iMovie. If it works, yay!
If you still need these other components for some other app, you can probably get updated DivX components for free at Perian.org.
You can get updated Flip4Mac components by running WMV Player and updating. It should prompt you to update automatically.
I am not sure about the Google components, but if you are running something that needs them, it should prompt you to install the current versions.
If none of that works, post back. -
I'm having issues loading Youtube on my MacBook Pro for about a week now. I'm not sure if this is because of my computer or internet but my sister's PC loads Youtube completely fine. Can someone help me figure this out?
Hi, I had been having the same problem for over a week, but both my window's HP and my 2011 macbook pro barely could load youtube. What kind of router you have? I was using a belkin play router that was only 8 months old, switched to a new AirPort Extreme Base Station and now everything works perfect.
-
So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I would like to change the owners name on my ipad2 to my daughters name and credit. Could someone help me figure this out?
Sign out from Find My Phone in iCloud, and sign out from your Apple ID in Settings/iTunes & App Store
Then setup as a new phone with iTunes and when your Daughter sets it up for the first time she can add or set up her own Apple ID.
Cheers
Pete -
Seems I have a iCloud account on my iPad but not sure how I got it as I do not remember signing up for this feature. I got an e mail message saying I was running out for space on my iCloud and was given directions on how to find it on my iPad. I followed the directions but there was no iClound anywhere in my iPad settings.
Any help in figuring this out would be appreciated.If your iPad is running iOS 5 or higher, iCloud would be listed in Settings. If you are signed into an iCloud account your iCloud ID would be listed in Settings>iCloud.
-
I must be stupid because after searching the website and even asking for tech support(NO HELP) I can't figure out how to switch out the songs on my Iphone. I have more music saved on my computer than will fit on the phone and I want a new set of songs to listen to. Can someone break this down for me please???
BTW...I have an Iphone 3GSContent on your iOS device (iPhone/iPad/iPod) are all managed by iTunes. You can limit / select /randomize what is synced by selecting your iPhone under the Devices list, set your preferences and click Apply.
See this Video Tutorial http://support.apple.com/kb/VI72?viewlocale=en_US
For a full list of Video Tutorials for iTunes go to http://support.apple.com/videos/#itunes
Message was edited by: J D Knight III added links -
A couple of days ago, my I opened up my iMovie and it just goes into the blank screen. I am able to click on things like, "import" or "create" and it will take me into the next window, but when I choose an option, I receive a message that there is a problem, but they don't know what the problem is. It has been like this for the past couple of days. I have deleted and re-downloaded the app about 3 times and it still comes out the same. Please assist in any way possible!
Try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
When it's rebooted you can force a backup via Settings > iCLoud -
Machine-check capabilities (cpu 3) 0x0000000000000c07:
family: 6 model: 42 stepping: 7 microcode: 26
Intel(R) Core(TM) i5-2435M CPU @ 2.40GHz
7 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
panic(cpu 0 caller 0xffffff80002c4dd5): "Machine Check at 0xffffff800023cfc6, registers:\n" "CR0: 0x000000008001003b, CR2: 0x0000000113704000, CR3: 0x0000000000100000, CR4: 0x00000000000606e0\n" "RAX: 0x000000b0adfda20a, RBX: 0xffffff8000892620, RCX: 0xffffff8016ebbaf8, RDX: 0x00000000000000b0\n" "RSP: 0xffffff800010beb0, RBP: 0xffffff800010bed0, RSI: 0x0000000000000002, RDI: 0xffffff8000803000\n" "R8: 0xffffff800e271800, R9: 0x0000000000000000, R10: 0x8000000000100000, R11: 0xffffff80002dad00\n" "R12: 0x0000000000000000, R13: 0xffffff800023cf30, R14: 0x0000000000000000, R15: 0xffffff8000892638\n" "RFL: 0x0000000000000097, RIP: 0xffffff800023cfc6, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-1699.32.7/osfmk/i386/trap_native.c:2 78
Backtrace (CPU 0), Frame : Return Address
0xffffff800081bd20 : 0xffffff8000220792
0xffffff800081bda0 : 0xffffff80002c4dd5
0xffffff800081bf00 : 0xffffff80002daf2f
0xffffff800010bed0 : 0xffffff800023e7ee
0xffffff800010bf20 : 0xffffff80002b3832
0xffffff800010bf50 : 0xffffff80002c9ab9
0xffffff800010bf80 : 0xffffff80002c48d0
0xffffff800010bfd0 : 0xffffff80002da712
0xffffff80f2a63e70 : 0xffffff800022d375
0xffffff80f2a63eb0 : 0xffffff800022e060
0xffffff80f2a63f10 : 0xffffff800022f413
0xffffff80f2a63f70 : 0xffffff800063c0e8
0xffffff80f2a63fb0 : 0xffffff8000820057
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 758833727049
last loaded kext at 755421063771: com.apple.filesystems.smbfs 1.7.2 (addr 0xffffff7f80795000, size 241664)
last unloaded kext at 123341153357: com.apple.driver.AppleUSBUHCI 5.1.0 (addr 0xffffff7f80b25000, size 65536)
loaded kexts:
com.apple.filesystems.smbfs 1.7.2
com.apple.filesystems.ntfs 3.10.1
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AppleIntelHD3000Graphics 7.3.2
com.apple.driver.AGPM 100.12.75
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB 7.3.2
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBMassStorageClass 3.0.3
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4That panic was not caused by third-party software. If the problem is recurrent, the possibilities are:
A stale or corrupt kernel cache
A damaged OS X installation
A fault in a peripheral device, if any
Corrupt non-volatile memory (NVRAM)
An internal hardware fault (including incompatible memory)
An obscure bug in OS X
You may already have ruled out some of these.
Rule out #1 by booting in safe mode and then rebooting as usual. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
You can rule out #2 and #3 by reinstalling the OS and testing with non-essential peripherals disconnected and aftermarket expansion cards removed, if applicable. Sometimes a clean reinstallation may solve a problem that isn't solved by reinstalling in place.
Corrupt NVRAM, which rarely causes panics, can be ruled out by resetting it.
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications for your model.
Apple Diagnostics or the Apple Hardware Test, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test, if applicable.
In the category of obscure bugs, reports suggest that FileVault may trigger kernel traps under some unknown conditions. Most, though not all, of these reports seem to involve booting from an aftermarket SSD. If those conditions apply to you, try deactivating FileVault.
Connecting more than one display is another reported trigger for OS X bugs.
If your system is not fully up to date, running Software Update might get you a bug fix.
In rare cases, a malformed network packet from a defective router or other network device can cause panics. Such packets could also be sent deliberately by a skillful attacker. This possibility is something to consider if you run a public server that might be the target of such an attack.
If none of the above applies, make a "Genius" appointment at an Apple Store to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the panic, or if you can't, it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.
Print the first page of the panic report and bring it with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore, and you have at least two independent backups.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed. -
i just recieved an ipad2, 32gb, i cant figure out how to get it to connect to my wireless internet.. it is thru my cell carrier, i am suppose to be able to use up to 5 devices with it at the same time.. can someone tell me what i am missing.
You can not install it.
Only apps from the official Apple App Store can be installed. -
so im lettering a comic book.
im doing the dialog balloons for this one character in a special way
and ive got it so close to exactly how i want it but have hit a snag...
see this pic.
http://img190.imageshack.us/img190/2795/problemx.jpg
im using a brush as the stroke of the closed path, i love the jagged edges and nonuniform look of it. but my problem is the start/end point. i would love for it to connect.
is there a way to alter that brush so it will connect...?
i tryed to just make the ends of the shape not taper and be more blunt but it didnt really work....
.... also
is there a way to change and define the start/end point of a already existing closed path so that i control (if i never figure out how to make the ends connect id like to place those nonconnecting ends in different places.)
thanks for any help anybody providesis there a way to alter that brush so it will connect...?
Drag&drop the brush onto the ccanvas, modify, drag&drop back to the palette, update.
is there a way to change and define the start/end point of a already existing closed path so that i control (if i never figure out how to make the ends connect id like to place those nonconnecting ends in different places.)
Select the anchor point, hit the scissor tool in the tool property bar. This will split the path at the point, re-arranging the point order. You can then join it again, if needed.
Mylenium -
Bug in screensaver OR graphic card? Help me figure this out
I have a 15" MacBook Pro 2.66 GHz purchased in late September 2009. There is an odd bug that shows up in the mosaic screensaver (the one that represents one of your iPhoto pictures using a mosaic of your other photos) when I use the "Better Graphics" settings. If you have a similar computer, see if you can replicate this bug and let me know I'm not crazy...
This 10.6 standard screensaver shows a single picture, then zooms out to show that picture as part of a mosaic that represents one of your other pictures in iPhoto. When the photo mosaic is complete, it gradually dissolves into the actual photo, then repeats the process using that photo as part of a mosaic.
This screensaver works perfectly when running on the default NVIDIA GeoForce 9400M graphics card. When I switch to "Higher Performance" graphics and use the NVIDIA GeoForce 9600M GT card, the final image before the dissolve flips upside down, then dissolves into a right-side-up version of the image and starts the mosaic process again. Very odd!
I have noticed no other issues on my computer when using "Higher Performance" graphics, but this one is weird and disturbing because it is in an Apple screensaver. Any thoughts or experiences with this?Thanks for the suggestion - after someone else reproduced the problem on their MacBook Pro, I submitted a bug report. It's not a big deal, but this should probably be fixed.
-
Can anyone help me figure this out??? (exchange/ca...
Hi, thanks in advance to anyone who can explain this to me, I'll try and explain step by step:
My local exchange has been upgraded to infinity. (Eastbourne)
When I punch in my postcode (don't have a BT number as I'm with Sky at the moment) it says not available.
I've run my postcode through a different cabinet checker here CABINET CHECK BN21 1HF - and it says "part of deployment" though this data is months old.
When I run the checker with CABINET CHECK BN21 1EY it is on the same cabinet.
I checked that postcode on the BT infinity checker and they are able to get infinity - but I'm not??
Does this mean it's not coming to my flat? I'm in a block of flats but most of the other properties on the road are houses. The block of flats next door (BN21 1HJ) is also unable to get infinity.
This is infuriating! 50m down the road can get it and my mate 150m up the road can but not me!!
http://fttc-check.alc.im/results.php?postcode=BN211ey@Plainview
I thought it was pretty clear but there you go, I'll try again:
The rollout process leaves potential customers in the dark.
BT retail talk to the public but can't talk to Openreach.
Openreach have the information but don't talk to the pbulic.
BT Retail and Openreach are owned by the same company, there is no reason information couldn't be shared between them.
This is catch 22.
My conspiracy theory (!) is that this is done on purpose as if BT retail were able to obtain the information from Openreach the call volume of people phoning up to ask when they will be activated would be enormous. Openreach would have to hire large amounts of people to answer the constant requests from BT retail.
Thus it easier for BT retail to just blanket deny they can get the information.
It's either deliberate or it's just poor communication between two related companies (which is not very encouraging considering the industry they're in).
Lastly, this means that any potential customers who are awaiting BT infinity but may be out of contract on their current ADSL plan (like me) are stuck.
You could wait for infiity and stick with your DSL at a price that may not the best deal available or,
you could switch DSL provider for a better deal and wake up tomorrow with infinity available but you are now stuck in a contract for a year!
All the while the information is known by Openreach (I don't mean they know day and date for certain but certainly have better information than we do) and we are being kept in the dark. -
Can anyone help me figure this out?
Hi everyone, I have a college question which i'm stuck on, being new to java im struggling to finish the program, I'm still trying to get the correct code for the program, im not yet at the stage where im ready to compile. Anyway here is the task:
Write a program which represents a vehicle museum, which houses 2 types of vehicles: cars and motorbikes, these have the following in common: licence plate, year of manufacture, value, colour, the variables exclusive to cars are no of doors, no of seats, engine type(petrol/diesel), engine size (litres), the variables exclusive to bikes are: bike type(sports/tourer/trails) and engine size (cc).
The task is to create a program that will:-
add new vehicles (bikes or cars)
list all vehicles manufactured in a given year
list all vehicles of 1 litre or more (1 litre = 1000cc)
list all bikes
list all cars
The first thing I did was to write the code for the classes which I think is OK, the vehicle class being the parent class, with the cars and bikes as subclasses.
Then i've attempted to write methods for all the functions: addcar, addbike, the main menu and the methods for listing the vehicles in a given year and 1 litre or more.
Where im getting a bit stuck is the fact there is 2 objects: cars and bikes, which im having trouble with. heres the code, i've put comments on it where i think im going wrong:
/* The museum class */
class Vehicles
private String plate;
private String colour;
private int year;
private int value;
Vehicles(String p, String c, int y, int v)
plate = p;
colour = c;
year = y;
value = v;
String getPlate()
return plate;
String getColour()
return colour;
int getYear()
return year;
int getValue()
return value;
/* The Car Class */
class Car extends Vehicles
private int nodoors;
private int noseats;
private String enginetype;
private double enginesize;
Car(String p, String c, int y, int v, int d, int s, String t, double e)
super (p, c, y, v); // super class constructor
nodoors = d;
noseats = s;
enginetype = t;
enginesize = e;
int getNodoors()
return nodoors;
int getNoseats()
return noseats;
String getEnginetype()
return enginetype;
double getEnginesize()
return enginesize;
/* The Bike Class */
class Bike extends Vehicles
private String biketype;
private int enginesize;
Bike(String p, String c, int y, int v, int z, String b)
super(p, c, y, v); // super class constructor
biketype = b;
enginesize = z;
String getBiketype()
return biketype;
int getEnginesize()
return enginesize;
class Museum
static final int quit = 0;
public static int getMenuOpt() //menu method, i think this bit is ok?
Scanner menuOpt = new Scanner(System.in);
int option;
System.out.println("1. Add a bike to the collection");
System.out.println("2. Add a car to the collection");
System.out.println("3. List all manufactured in a given year");
System.out.println("4. List all vehicles over 1 litre (1000cc)");
System.out.println("5. List all cars");
System.out.println("6. List all bikes");
System.out.println(quit + ". Quit");
option = menuOpt.nextInt();
return option;
public static int addBike(Bike bikes[], int bikeTot) //method to add bike not sure about this, do I need to declare all variables or just the ones exclusive to bikes
Scanner input = new Scanner(System.in);
String type;
int esize;
System.out.print("Enter registration number ");
plate = input.nextLine();
System.out.print("Enter colour ");
colour = input.nextLine();
System.out.print("Enter year of manufacture ");
year = input.nextInt();
System.out.print("Enter the value of the vehicle ");
value = input.nextInt();
System.out.print("Enter the type of bike (Sports, Tourer or Trails ");
type = input.nextLine();
System.out.print("Enter the size of the engine (in cc)");
esize = input.nextInt();
bikes[bikeTot] = new Bike(plate, colour, year, value, type, esize);
bikeTot++;
return bikeTot;
public static int addCar(Car cars[], int carTot) // again not sure about this same question applies as the addbike method
Scanner input = new Scanner(System.in);
int doors;
int seats;
String type;
double esize;
Scanner input = new Scanner(System.in);
System.out.print("Enter registration number ");
plate = input.nextLine();
System.out.print("Enter colour ");
colour = input.nextLine();
System.out.print("Enter year of manufacture ");
year = input.nextInt();
System.out.print("Enter the value of the vehicle ");
value = input.nextInt();
System.out.print("Enter the number of doors ");
doors = input.nextIntLine();
System.out.print("Enter the number of seats ");
seats = input.nextIntLine();
System.out.print("Enter the engine type (P for Petrol, D for Diesel) ");
type = input.nextLine();
System.out.print("Enter the size of the engine (in litres)");
esize = input.nextDouble();
cars[carTot] = new Car(plate, colour, year, value, doors, seats, type, esize);
carTot++;
return carTot;
public static void ListByYear(Bike bks[], int bikeTot, Car cars[], int carTot)
Scanner input = new Scanner(System.in); // Really not sure about the code for this method, dont know how to list vehicles for both cars & bikes
int year;
System.out.print("Enter Year ");
year = input.nextInt();
for (int count = 0; count < carTot; count++)
if ( Car[count].getYear() == year )
System.out.println( Car[count].getPlate() );
public static void listEngineSize(Bike bks[], int bikeTot, Car cars[], int carTot)
Scanner input = new Scanner(System.in);
int enginesize;
System.out.print("Enter Engine Size (in cc) "); // Again struggling on this one, the cars engine size will be in litres, the bikes in cc,
// This is probably all wrong!
enginesize = input.nextInt;
for (int count = 0; count < count++)
if
( Bike[count].getEnginesize > enginesize );
System.out.println( Bike[count].getPlate);
( Car[count].getEnginesize > enginesize );
System.out.println( Car[count].getPlate);
public static void main(String[] args)
// The main method, i think this bit is ok, please let me know if it isnt
Car cars[] = new Car[100];
Bike bikes[] = new Bike[100];
int carsInMuseum = 0;
int bikesInMuseum = 0;
int option;
option = getMenuOpt();
while (option != quit)
if (option == 1)
bikesInMuseum = addBike(bike);
else if (option == 2)
carsInMuseum = addCar(car);
else if (option == 3)
ListByYear(car, bike);
else if (option == 4)
listEngineSize(car, bike);
else if (option == 5)
listallcars(car);
else if (option == 6)
listallbikes(bike);
else System.out.println("Invalid input - please try again");
option = getMenuOPt();
}I've simplified my program for the time being, you just can add a car or bike (up to 100 of each) then print a list of cars or bikes stored, what i want to know is there any way of simplifying the listallcars and listallbikes methods to just one line of code to print a list of all the attributes for the car class & also bike class, im not sure how this is done.
Here is my code, this time it compiles with no errors & runs ok
Sorry if the answer is obvious im really new to all this.
import java.util.Scanner;
/* The Vehicle Class*/
class Vehicles
private String plate;
private String colour;
private int year;
private int value;
Vehicles(String p, String c, int y, int v)
plate = p;
colour = c;
year = y;
value = v;
String getPlate()
return plate;
String getColour()
return colour;
int getYear()
return year;
int getValue()
return value;
/* The Car Class */
class Car extends Vehicles
private int nodoors;
private int noseats;
private String enginetype;
private double enginesize;
Car(String p, String c, int y, int v, int d, int s, String t, double e)
super (p, c, y, v); // super class constructor
nodoors = d;
noseats = s;
enginetype = t;
enginesize = e;
int getNodoors()
return nodoors;
int getNoseats()
return noseats;
String getEnginetype()
return enginetype;
double getEnginesize()
return enginesize;
/* The Bike Class */
class Bike extends Vehicles
private String biketype;
private int enginesize;
Bike(String p, String c, int y, int v, String b, int z)
super(p, c, y, v); // super class constructor
biketype = b;
enginesize = z;
String getBiketype()
return biketype;
int getEnginesize()
return enginesize;
class museum
static final int quit = 0;
public static int getmenuopt()
Scanner menuopt = new Scanner(System.in);
int option;
System.out.println("1. Add a bike to collection");
System.out.println("2. Add a car to collection");
System.out.println("3. List all cars");
System.out.println("4. List all bikes");
System.out.println(quit + ". Quit");
option = menuopt.nextInt();
return option;
public static int addBike(Bike bikes[], int bikeTot)
Scanner input = new Scanner(System.in);
String plate;
String colour;
int year;
int value;
String type;
int esize;
System.out.print("Enter registration number: ");
plate = input.nextLine();
System.out.print("Enter colour: ");
colour = input.nextLine();
System.out.print("Enter year of manufacture: ");
year = input.nextInt();
System.out.print("Enter the value of the vehicle: ");
value = input.nextInt();
System.out.print("Enter the type of bike (Sports, Tourer or Trails: ");
type = input.next();
System.out.print("Enter the size of the engine (in cc): ");
esize = input.nextInt();
bikes[bikeTot] = new Bike(plate, colour, year, value, type, esize);
bikeTot++;
return bikeTot;
public static int addCar(Car cars[], int carTot)
Scanner input = new Scanner(System.in);
String plate;
String colour;
int year;
int value;
int nodoors;
int noseats;
String type;
double esize;
System.out.print("Enter registration number: ");
plate = input.nextLine();
System.out.print("Enter colour: ");
colour = input.nextLine();
System.out.print("Enter year of manufacture: ");
year = input.nextInt();
System.out.print("Enter the value of the vehicle: ");
value = input.nextInt();
System.out.print("Enter the number of doors: ");
nodoors = input.nextInt();
System.out.print("Enter the number of Seats: ");
noseats = input.nextInt();
System.out.print("Enter the engine type: ");
type = input.next();
System.out.print("Enter the engine size: ");
esize = input.nextDouble();
cars[carTot] = new Car(plate, colour, year, value, nodoors, noseats, type, esize);
carTot++;
return carTot;
/* list all bikes, can this be simplified to print out all attributes of bike class without having to type all this code */
public static void listallbikes(Bike bikes[], int bikeTot)
for (int count = 0; count < bikeTot; count++)
System.out.println("Bike no: " + (count+1) + " reg no " + (bikes[count].getPlate()));
System.out.println("Year: " + (bikes[count].getYear()));
System.out.println("Colour: " + (bikes[count].getColour()));
System.out.println("Value: " + (bikes[count].getValue()));
System.out.println("Type of bike: " + (bikes[count].getBiketype()));
System.out.println("Engine Size: (cc) " + (bikes[count].getEnginesize()));
System.out.println();
/* list all cars, can this be simplified to print out all attributes of bike class without having to type all this code */
public static void listallcars(Car cars[], int carTot)
for (int count = 0; count < carTot; count++)
System.out.println("Car no: " + (count+1) + " reg no " + (cars[count].getPlate()));
System.out.println("Year: " + (cars[count].getYear()));
System.out.println("Colour: " + (cars[count].getColour()));
System.out.println("Value: " + (cars[count].getValue()));
System.out.println("No of doors: " + (cars[count].getNodoors()));
System.out.println("No of seats: " + (cars[count].getNoseats()));
System.out.println("Engine type: " + (cars[count].getEnginetype()));
System.out.println("Engine size (l): " + (cars[count].getEnginesize()));
System.out.println();
public static void main(String[] args)
Bike bikes[] = new Bike[100];
Car cars[] = new Car[100];
int bikesinmuseum = 0;
int carsinmuseum = 0;
int option;
option = getmenuopt();
while (option != quit)
if (option == 1)
bikesinmuseum = addBike(bikes, bikesinmuseum);
else if (option == 2)
carsinmuseum = addCar(cars, carsinmuseum);
else if (option == 3)
listallcars(cars, carsinmuseum);
else if (option == 4)
listallbikes(bikes, bikesinmuseum);
else System.out.println("Invalid input - try again");
option = getmenuopt();
-
This was happening all the time on my old 2006 iMac, and I thought that when I upgraded to a new computer it would go away. No such luck.
Sometimes the program works just fine, and other times I have this error. I haven't been able to pinpoint what is causing it.
Basically what happens is, I will try to type a number in the box to edit the size of the image (or sharpness, etc. something that requires you to enter a number), and as soon as my mouse hovers over the box, the numbers start changing on their own. As soon as I move the mouse away, the problem stops, but of course this means that I am unable to type in the number that I want.
I've tried unplugging my mouse and keyboard - that doesn't change anything.
Has anyone run into this issue before?
Btw, I use a 2013 iMac, OS version 10.9.5
(I have a video clip of this problem, but I don't know how to share it here)Your task is hardly a case for Photoshop: replacing text accurately in a scanned, not even
straightened image.
My recommendations:
a) put a crossreference list on each page
or
b) straighten the scans and improve the contrast, both by Photoshop.
Then apply a program which converts images of text into machine coded text
by OCR - Optical Character Recognition , for instance Abbyy Finereader
http://finereader.abbyy.de/professional/?adw=google_eu&gclid=CMirrcCMx7MCFZHRzAodlisAJg
(I'm not related to the manufacturer of this software, I'm just a user).
In coded text it's easy to replace isolated character groups as required.
Best regards and good luck --Gernot Hoffmann
Maybe you are looking for
-
Power Mac G4 - corrupted disk problem?
The G4 will turn on, but I unable to log in. Tried rebooting. Lost Disk 1 and 2. Neighbor's friend repairs Macs and he suggested that I purchase Tiger and new hard drive. I purchased Tiger, but not a new hard drive yet (don' know what to buy!) Insert
-
It started with difficulties to catch wifi connections around and the wifi connection in my place..... then the switch on to Wifi just blocked - once i've tried the solution with hairdryer and it worked for a few days, according to some suggestions
-
DSO Activation error in SAP BI 7.0
Hi all, I am trying to activate a DSO which is created by me in SAP BI7.0.When I save the DSO it didn't placed any error even when I clicked Check it dispalyed as consistent.But When I clicked activate it placed an error saying the DSO cannot be actv
-
Can't install drivers from HP for laserjet 1022 printer on my new computer with Windows 7.
I have a laserjet 1022. I can't install the HP drivers provided on the HP website onto my new computer. When it asks me to connect the printer, the printer is recognized, however the message continues to say waiting for the connection. I have trie
-
How much HD space should I partician for Windows XP?
I am upgrading to a new (2010) iMac i5 with 1 TB HD and I was wondering how much disc space I should make for Windows XP? I only have a couple of special apps that I use in Windows and the attending files do not take up much space so other than the O