Help me reinstall my CS6 ?

I lost all my programs on my laptop due to viruses. How can I reinstall my student version of CS6?

If you have the installation disks then you can use those.  If not then you need to download the installation file(s) to reinstall.  If you check your Adobe online account you might find links to download for the products you have registered.  IF you cannot find links you can download the trial versions and use your serial number to activate to full use.
Adobe site trial versions:
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Alternative site trial versions:
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
http://prodesigntools.com/adobe-cs6-direct-download-links.html

Similar Messages

  • I need to rebuld the "C" drive on my computer will need to reinstall adobe cs6 when I am done, but have moved recently and lost the data to get that done. Help!

    I need to rebuld the "C" drive on my computer will need to reinstall adobe cs6 when I am done, but have moved recently and lost the data to get that done! Help!

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

  • CC won't let me reinstall Photoshop CS6. Please help.

    I had Photoshop CS6 on my computer and CC kept offering me an upgrade. Whenever I tried to upgrade, I got an error that it was unsuccessful. This happened several times. So I decided to uninstall Ps and then reinstall it. But now that it's gone, CC won't let me download and reinstall. It still wants me to upgrade what it thinks is on my computer. So I tried the upgrade, and that didn't work to reinstall Ps.
    Can someone please tell me what I need to do to reinstall Ps CS6 onto my computer?
    Thanks,
    Sue

    NEVERMIND!!!!
    I searched and searched. Finally figured out that I needed to sign out of CC completely, then sign back in. Once I did that, CC saw that I didn't have Ps on my computer, and I was able to reinstall it.
    I hope this helps someone else.

  • Reinstalling photoshop CS6 extended

    I have to reformat my hard drive and reinstall photoshop CS6. Will Adobe recognize that I am not just installing the program on another computer but that I am using my legal software and let me use the program?
    I hope I am making sense.

    If your computer isnt yet completly dead and you have the ability to boot up Photoshop you can deactivate it from the help menu giving you back one of your activations. That is assuming you can access your computer (which I realise you may not be able to do).
    Cheers
    John

  • Error "Bridge CS6 was not found on this system. To use this command, please reinstall Bridge CS6"

    Hi all,
    We are having issues with Adobe Bridge working properly with Photoshop.  When trying to access Bridge through Photoshop we receive the following error "Bridge CS6 was not found on this system.  To use this command, please reinstall Bridge CS6"
    - We have the Master Collection CS6 installed
    - Bridge CS6 is working fine as a stand-alone program
    - This is installed on Windows 7 x64
    - I am unable to find an uninstall location for Bridge CS6, it is not under control panel > Adobe Master Suite
    - All adobe products are up-to-date as of this morning.
    Any help would be appreciated.
    Thanks,
    Message title was edited by: Brett N

    Bacterin1 wrote:
    It has not worked previously.
    Does not make a difference is bridge is open or not.
    Yes, we are accessing it through File/browse in bridge.
    OK, back to square 1.
    Does Bridge work normally?  Does it load Bridge CS6 or does CS5 come up?  Only one version can run at same time.
    If you double click on an image it opens in CS6?

  • Reinstall Photoshop CS6, serial # not recognized

    Please help.  Had to reformat pc.  Trying to reinstall photoshop cs6 but installer says my serial no. is not valid.  It was an upgrade so went back and tried previous serial no., that didn't work.  Tried, original serial no. of cs2 and that didn't work.  Help.....

    If its an update you will need two serials.  Your upgrade serial and one of your prior upgrade serial or you original product serial.  You should be able to get these serials by logging on to Adobe.com with your Adobe user ID and Password.  Then go to My Adobe then My Producrs  and click on your CS6 and Prior products to see your serial numbers.

  • I need help to reinstall Creative Suite CS5 on a new computer. I have been given a case no: 212953715. Can you help me!?

    I need help to reinstall Creative Suite CS5 on a new computer. I have my old serialnumber.

    what's the problem?
    if you need the installation files,
    Downloads available:
    Suite:  CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  7 | 6 | 5
    Download and installation help for Adobe links  https://helpx.adobe.com/download-install.html
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Is reinstalling Photoshop CS6 still OK? My #1 machine is bogging down in Bridge, and I would like to replace the old klunker on #2

    Is reinstalling Photoshop CS6 still OK? My #1 machine is bogging down in Bridge, and I would like to replace the old klunker on #2

    Larryt48503521 you are welcome to install Photoshop CS6 on a new computer.  You can find details regarding the activation process at Activation & deactivation help - http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

  • Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

    I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
    Thank you.

    Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
    Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
    Thanks again.
    John

  • Reinstalling Dreamweaver CS6

    I need to reinstall Dreamweaver CS6 on a new PC and I need to install it on a notebook.  Both use Windows 7.  I believe I must deactivate my current installation first.  What is the correct procedure for these installations.
    Thanks,
    Scott

    Reinstalls on the same machine don't require deactivation unless you completely rebuild your operating system. Feel free to use Help --> Deactivate regardless.
    Mylenium

  • My SSD with a running Dreamweaver CS6 version crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 the error " inconsistency in the installation programm database" (in german terms) occurs. I tried to delete everything concerning t

    My SSD with a running Dreamweaver CS6 version crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 the error " inconsistency in the installation programm database" (in german terms) occurs. I tried to delete everything concerning to CS6, rebootet and so on - nothing worked. Two hours later I tried to install DW 5.5 - that worked. Afterwards I tried again to install 6.0 - without success. Can anybody help?

    Thank you for your answer. I could not find caps.db.
    Meanwhile I solved the problem as follows: I searched for "dreamweaver" everywhere an deleted everything I could find. Then I searched for "CS6" and did the same. I guess there were around 20 or more places where I deleted directorys or files. Suddenly the installation did not stop at 2 % what it always did before and the installation was a success :-) It cost me more than 4 hours to figure that out and I did not find a really helping hint somewhere. Adobe itself I could not contact because I could not find an email adress or a phone number - poor support for such an expensive software. For luck I did not have to deliver something just in time. Lacking a useful support is a really poor, poor attitude of Adobe... I think I will not buy anymore Adobe products - it could cost too much of my time... :-(

  • I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported.  Please choose a different volume for installation."  I am f

    I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported.  Please choose a different volume for installation."  I am further told that "Adobe apps cannot be installed on case-sensitive drives, you need to Install the product onto an HFS+ or HFSJ non-case-sensitive drive."
    What I don't understand is this:  I originally bought and installed Photoshop CS6 back in March 2013, and it worked fine.  Yesterday my hard drive had to be replaced and my computer person salvaged as much of what was on it as he could, but now I have to reinstall Photoshop.  1) Why did it work before and it's not working now?  2) Is there anything I can do that does not involve reformatting the hard drive?

    It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
    Error "Case-sensitive drives not supported" or similar install error | Mac OS
    Mylenium

  • After last update itunes wouldn't open on my laptop (windows 7).  i uninstalled it but now it won't re-install but just takes me to 'thank you' page - help to reinstall please...

    Recently i updated my the itunes but after doing so although it would open on my computer for a bit, it wouldn't recognise it  - ie, syncing phone or I could open the program but when trying to redeem a gift voucher it didn't recognise the program on my PC and suggested i install it!.  Today it wouldn't open at all so I tried to  uninstalled it so i could reinstall it from scratch but now it won't re-install but just takes me to 'thank you' page.
    - help to reinstall please...

    Hey Elaine07!
    I have an article here that can help you with that issue. This article will help you make sure you have uninstalled iTunes correctly and help you troubleshoot the launch issues you are seeing:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Help to reinstall OS X afetar hard drive replacement

    Hello.
    I have a Mac book pro 17" model A1297. I have no recovery media, and his hard drive is bad. Several times it doesn't startup properly.
    I have a brand new 500gb HDD, and I can replace the original HDD.
    I need help to reinstall OS X, because as said, I have no DVD or pen drive with OS X instalator.
    thank you so much.

    Your original OS X version was 10.5.6. You need to do one of two things:
    Contact Apple and order replacement DVDs for your model, if they have them available.
    Purchase the Snow Leopard DVD so you can install it on the computer.
    For replacements:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes
    international calling numbers..
    For the Snow Leopard DVD:
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
    Once  you receive the required discs you will need to prepare the new hard drive then install OS X:
    Clean Install of Snow Leopard
         1. Boot the computer using the Snow Leopard or Tiger Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    For Snow Leopard or Tiger you should open Software Update in order to install any additional required updates.

  • Adobe TV helps tutorials for Photoshop CS6

    When trying to view Adobe TV help tutorials for Photoshop CS6 all I see is a black screen/box where the video should be.  I am running XP, with maximum memory, IE 8, and the latest Flash player.  I have also run through all of the check points noted in the following link:
    http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_Flash_Player_ information
    Any help? 

    What is your display adapter, device driver version & date?  See http://forums.adobe.com/thread/945765

Maybe you are looking for

  • Export to text from CR viewer

    Hi all, I need to export my report to the plain text. This option is available in designer (2008), but it is not in the viewer. Any idea how to export the report to txt from the viewer?

  • Intermittent Error 41106 Error when trying to open an Excel file.

    I am having an intermittent problem while opening an Excel file.  The problem only occurs occasionally during execution of my program.  My program has a cluster of buttons each button opens a sub VI that is part of a calibration process.  The first V

  • Where is iCloud icon in my mac

    i cant see the icloud icon in my mac pro

  • Apple logos comin n goin and it wont turn on

    hey! i had a problem with a few songs on my nano. a point woul come where my nano couldnt play the song any further and jumped to the next song unless i fast forward the song, so i decided to format the nano. but unfotunately whike it was fromating,

  • Assiging Query to Web template

    Hi, I was asked to add new query that I created to existing web template. I have been able to Identify the web template that other queries are assigned to but don't know how to add my query to it. for example Template_ID=0ANALYSIS&Infocube=CCA&Query=