Help me to Finding BI Infocubes
Hi,
here is the Link in <b>BI content</b>, can you pls tell where <b>SD cubes</b> I find.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
Thank You
prasanna
Hello,
go to supply chain Management -
> Order Fulfilment.
you can find All SD infocubes.
http://help.sap.com/saphelp_nw2004s/helpdata/en/3c/63073c52619459e10000000a114084/frameset.htm
shoukath Ali
Similar Messages
-
Help needed in Finding Download location for Sun One Portal 7
Hi,
help needed for finding download location for Sun ONE Portal 7. I tried to find in Oracle Download page ,
http://www.oracle.com/us/sun/sun-products-map-075562.html, But unable to find.
Please share the link for download location.
I am totally new in Sun ONE Portal.
Thanks,
Edited by: 945439 on Oct 5, 2012 3:41 AMtry edelivery.oracle.com under sun products.
-
Plz help me to find out tables and fields........based on SD,PM,FICO Module
Hi plz help me to find out the table name and field names as i am unable to find .....In the spec am given requirements in the following pattern.
Description SAP-Term Explaination
1.Salesman Equipment AC Mgr. VBPA2 this is the salesman code - I need the
description for this.
2.Vendor MEPO_TOPLINE-SUPERFIELD Vendor field is pull from me23n where the
condition will be that COBL-KDAUF (this is a
structure from me23n in item data-account
assignment-sales order. The number here should
be the corresponding contract number. This field
should include a multiple selection function. User
can put more than one description to search for.
3. Val. Period Val. Period Category Val. Period Category from va41 header-contract
Category data. This field should include a multiple selection
function. User can put more than one description
to search for.
4. Service Order/ CAUFVD-GSTRP/ This should be the document date where by it is in
Purchase Order MEPO_TOPLINE-BEDAT between the range the user input
Document Date
5. B2B Vendor MEPO_TOPLINE-SUPERFIELD Vendor field is pull from me23n where the condition
will be that COBL-KDAUF (this is a structure from
me23n in item data-account assignment-sales
order. The number here should be the
corresponding contract number.
6. B2B Cost MEPO1211-NETPR This cost is pulled from PO (me23n) however take
note that the price will be pulled out base on line
item Net Price. Make sure that price is taken
corresponding only to the equipment tied to it.
Check on Number 7 to see how is the line item tied
to the equipment.
If this is in other currency please make it to SGD
with the exchange rate field Exchange rate
(MEPO1226-WKURS)
NOTE:: I need to know the table from which I can
determine the currency type as can be seen in the
ME23N transaction and also te exchange rate for
that particular currency.
7. No of faults The service order (CAUFVD-AUFNR) created base
on the equipment in Number 8. This should exclude
the service order of type RD08. Service order can be
access by IW33.
8. Faults Completed This would be the number of faults (Number 13)
which has a system status (CAUFVD-STTXT) of
TECO. System status can be viewed in IW33 Sys.
Status. Take note service order type RD08 will be
excluded
9. Time Spent on Fault AFVGD-ISMNW This field is in IW41 in confirmation base on the
order created. This field will be the actual time
spent. This will correspond to the Faults
Completed (Number 14). This means only orders
with system status TECO will be pull. Take not
service order type RD08 will be excluded
10. Fault Cost RIHAUFK_LIST- DGESKOSIST This will be the total cost for a service order which
have the status TECO. Those which are not TECO
will not be needed. This field can be obtain from
IW39 (standard report). Execute the report and
there will be a field for Total Actual Cost. You might
need to change the screen layout to be able to view
this. Take note service order type RD08 will be
excluded
11. PM Hours AFVGD-ISMNW This field is in IW41 in confirmation base on the
order created. This field will be the actual time
spent. This will correspond to the Faults Completed
This means only orders with system
status TECO will be pull. Take note service only
take order type RD08.
12. Spare Cost Spare part cost This field will be in IW33 under cost tab, and cost
PMCOEA-IKOSTENKGR tab in item level. This will be the actual cost of spare
part after TECO. This will include all order type.
13. Credit Note Credit Memo The programs need to pull out credit memo which is
reference from the contract. If there is a credit memo
reference from the contract then the value will be net
price per equipment.Can u tell me purpose of this spec ?
Regards,
pandu. -
Can somebody help me in finding a solution or an explanation to the problem I am currently experiencing as well as others wherein we cannot connect to the iTunes store. An error message appears and either says "iTunes could not connect to the store. An unknown error occurred (0x80096004). Make sure your network connection is active and try again" or "iTunes could not connect to the store.Make sure your network connection is active and try again." Despite the fact that my network connection is working quite fine, this problem still persists. I can say that my connection is fine because I can surf the internet and furthermore, I used to connect to the iTunes store just before this incident happened which started from April 17, 2014 and persists until today. I tried to solve the problem by following the troubleshoot procedures given in the support section of this site but it really did not solve the problem. I believe that others are experiencing this situation as well very similar to mine when it comes to the time of occurrence as I have read in the discussions in this site. Even though we have different network connections, operating systems and other specifications, we still experience the same problem, so is there really a problem with our computers or is it with the iTunes? And by the way, my computer works under Windows XP. Thanks a lot. God bless.
Try this...
Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
cmd /k netsh winsock reset
Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
You should get something similar to this:
Reboot the computer and the problem should be resolved.
If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
tt2 -
I actually need help but cannot find the answer.
Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as blank as when I first open Firefox, it automatically loads my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
Thank you.
''[Personal information removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''hello, please refer to [[New Tab Page – show, hide and customize top sites]] in order to switch the feature off.
-
I have 2 computers (1 Pc and 1 MAC) and 1 Iphone.The I phone is synchronised with the PC. I want to synchronised it also with my MAC, without erasing all my music and files. Someone can help me to find the answer ?
i have already try the copy/paste thing with the ID of the file "iTunes Music Library.xml" it didn't change a thing. each time I relaunched Itunes, the ID is the first I have in the MAC.
I have more than 5 000 files of music. I don't want to recreate one by one all my playlits.
Many thnaks for your answers.
ConstanceYou can sync iphone with one and only one computer at a time. If you sync to another, it will erase the current content and replace with content form the new computer. There is no way around this.
Put everything on one computer and sync from there.
BTW, you posted in the Home Share forum. Your question seems to have nothing to do with home share. -
Dear Apple,
Please help me to find my iPad Air 2 64 GB and iPhone 5C 8GB. They're in IOS 8.0 maybe...I lost all of them last night. I set up icloud for my devices but i can't find them because they were not connect to the Internet. Please guide me other ways to find my "best friends". They're very important to me. Many important files for my job in here and it has sentimental value to me. My boyfriend gave it for me so i don't want to lose them. And because i just lost my iPad Air last 3 month, and now i just bought iPad Air 2 two months ago. I'm so sad and lost. I want to catch the thief to the police so bad because they keep my bag and many other important things. I can not do anything without them. Please help me and contact me via my email or my phone. Thank you very much. Hope to receive your answer soon.Hey there thaovy309,
Welcome to Apple Support Communities.
The linked article below provides a lot of great information and suggestions that should address your concerns about your data and finding your lost or stolen iPhone 5c and iPad Air 2.
If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support
Take care,
-Jason -
hello i forgot my i cloud password..anyone can help me to find my password.i already make a new apple id..but my icloud use another account..so how to reset my iCloud account plz hel me
Making a new Apple ID is not a good idea, since you have to reset the password for that Apple ID anyway. All of your purchases are tied to the Apple ID that the iCloud account was created under. So, you have to retrieve the password for that Apple ID in order to sign into iCloud anyway.
Go to Manage your Apple ID, and click on the Reset Password option (Apple - My Apple ID). Sign on with the Apple ID that the iCloud account was created under, and answer the security questions. If you do not remember the answers to the Security Questions, contact Apple Support to have them reset:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB -
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"
HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradharHi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420 -
Hi
Can anyone help me in finding the reason why the date on e=mail reced is different from the one on my MacBook eventhough it is correct
ThanksTry this...
Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
cmd /k netsh winsock reset
Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
You should get something similar to this:
Reboot the computer and the problem should be resolved.
If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
tt2 -
need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?
Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing. -
Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory
Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it.
Alex D
Applications Engineer
National Instruments -
I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you. This is for Quicktime Player.
"The document “IMAG0026.AVI” could not be opened. A required codec isn't available."Try Perian.
http://perian.org/ -
I would like to help me. My iPhone was lost and stolen and I didn't have configured Find My iPhone. So I could n't find it. Please help me to find it or delete my information and photos. This is my serial No: DN*****TWD.
<Personal Information Edited by Host>If you didn't set up Find My iPhone, there's nothing we can do to help you. Sorry.
-
[SOLVED] Help Needed to find the name of the openbox theme
Can anyone help me to find the name of the openbox theme ?.
Thank you.
It's Numix
Last edited by bhante (2015-01-07 11:13:12)That looks a lot like the Numix GTK theme...
Maybe you are looking for
-
Thanks for asking those questions; I knew I was bound to leave some information out. Unfortunately, I don't have verifiable income during the summer, but I did during the school year, and I will during this upcoming school year. The only reason I was
-
Inventory cube 0IC_C03 ,Stock on particular date
Hi All, We are trying to get the stock on a particular date using cube 0IC_C03 ,but we are unable to get the total stock on a given date. 1)Ex: I want stock on 01.12.2009 ,but in the query output I am getting null values. I am only getting the
-
Hi, I am trying to validate a .Net Framework 4 WinForms application for use in the Microsoft Partner Network portal. I am using Windows App Certification Kit 3.4 for Windows 8.1 , and the Validate Desktop App option. To build the package I am using I
-
How can be resolved two variable at once
i am having two differnt file, both file having no and time , i want to make programme that when, number and tiome is same in both file give that index onle in , i am going to attached the file Attachments: rinex.xlsx 27 KB sp3.xlsx 12 KB
-
Insert data into CRM Actions tabs
Hi experts Is there any function modules or bapi or workarounds to insert data into CRM Actions tabs (table PPFTTRIGG)? Is there any consequences if were to perform direct insertion to the table PPFTTRIGG? thanks in advance!