Help me with wireless network

i have
HP Notebook - 15-r118ne
i installed Windows 8.1 Professional
And i have installed all Drivers and Wireless Button Driver Too
but some time turn my lap on
my wireless button light is on but the wireless seems to be off and no networks found
i have to restart my laptop so can i see networks and i can connect
what's this i need a solution if u plz
thanks

@WebCracKer ,
Hello and thank you for posting on the HP support forums. When you loaded Windows 8.1. Did you get your drivers from the official HP support page for your system.
HP Notebook - 15-r118ne - Software and Drivers
If you did here is a link for trouble shooting wireless.
HP PCs - Troubleshooting Wireless Network and Internet (Windows 8)
if you are still having issue please contact HP phone support for repair options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you again and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Similar Messages

Impossible connecting with wireless network Netgear WNR 2000

I can not log on to my wireless network (Netgear WNR 2000) with my macbook. My other PC:s work fine and connect always. My Macbook only connect after I have restarted the router. When I use my Macbook in other places I can connect with wireless network. What is the problem?

I'm assuming that you're using the right network password! After that, the most common causes of difficulty are:
- The router not set up for DHCP and so cannot allocate an IP address to the MacBook
- The router has "MAC" Address Authentication (a security feature - don't mistake MAC for Mac[intosh]) turned on and the AirPort MAC address isn't in the pass list.
- The default "Automatic" location in System Preferences > Networks has been modified so that it no longer works.
Bob

Sangean digital radio with wireless network music player

Hi. I have just purchased a Sangean digital internet radio with wireless network player.
Can I link this to itunes on my 2010 Mac?
Is there any way I can easily convert my Itunes library to windows media player to support this functionality?

A couple of things that come to mind to check... Does the SBWM device connect to your wireless network when you turn it on? SBWM device on power up / init finishes with 2 solid green indicators. If it ends with 2 solid green then you can check the network assigned IP from the remote / system settings, make sure you're on the same subnet as your PC. If SBWM lights end up with solid blinking green the SBWM did not connect to the wireless network. If this is the case make sure your DSL modem has the radio turned on. Make sure the DSL modem has the 802.b protocol turned on. Do you use network security. The highest level security the SBWM will support is WEP 28, if your new DSL modem is set for WPA or higher the SBWM will not be able to connect to the network. If you were using WEP security on your old cable modem the key in the new DSL modem will need to be identical to what you had on your cable modem, or you'll have to do the SBWM network setup via USB to load the new WEP key to the SBWM device. Hope these suggestions are of use. W3

Help with wireless networking with my Photosmart 6525 on Mac 10.8.5

I have just purchased an HP Photosmart 6525 and cannot get the wireless printing to work. I've followed all of the instructions provided online and printed with the device.
I'm attempting to connect from my Macbook Air running 10.8.5. I've successfully connected the printer to my wireless network - I just printed the wireless network test and it states "No problems found. Congratulations...". Gee thanks...
I've taken the steps of enabling Wireless Direct, and Web Service, ePrint is on. By the way, all of these different options are totally unhelpful - I cannot determine which are actually required to just connect via wi-fi?
I also downloaded and installed the latest driver software from HP. Going through the setup it reaches a point where it tells me to unplug USB (cannot go through it without it connected I learned) so it can configure wireless. Then it tells me it cannot find the device.
I have no option to skip this and although I've run it several times I still don't see the "setup assistant" application that it supposedly installed.
I've seen elsewhere that there is supposed to be the ability to connect directly to the printer via browser, by typing in the IP address. I've verified that the IP address appears valid for my network (192.168.1....) but when I put it into Chrome it cannot find it.
My frustration level is rapidly rising as the documentation and online support for this product is incredibly disjointed and unhelpful. I've searched online for hours, including this forum. Would appreciate any pointers to more detailed help / instruction before I am forced to return this printer.

Hi,
Not sure this will ultimately help, but you should update your version from 14.0.0 to 14.1.2. If you can get to the update via Help> Updates... try using the Creative Cloud desktop application found here:
https://creative.adobe.com/products/creative-cloud
You may already have it installed; it can be found in the Applications directory for a default install.
regards,
steve

Help with wireless network set up on 8820

Can someone please give me some help before I pull the rest of my hair out!
I am trying to connect my 8820 and also an 8110 to our home wireless network, each time I go through the set up procedure and find the network, put in the correct WEP key and then try and connect it gives me the following error messages on both phone "Device failed to associate with the AP." can some one please tell me where I am going wrong?
I have changed the home network from WPA to WEP as there is no option for WPA in the settings.
Help Please.
Many thanks in advance

I am unable to connect a 8820 on my network with same message noted by User: leomyles. I am able connect my Bold 9000 without any difficulty. Does anyone have any suggestions? I would not have thought there should be such a problem within 2 Blackberry models.
I too need help on resolving this issue. I would have chosen another model for my staff had I known such a problem existed.

Bug in Kernel 2.6.38-x with wireless network?

The Wireless Network is can't worked, When I update to Kernel 2.6.38（x64） .
$ > lsmod |grep ath
ath9k 85141 0
mac80211 202190 1 ath9k
ath9k_common 1885 1 ath9k
ath9k_hw 275467 2 ath9k,ath9k_common
ath 13942 2 ath9k,ath9k_hw
cfg80211 141484 3 ath9k,mac80211,ath
$ > lspci |grep Wireless
05:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01)

Hi,
There are two updates for kernel 2.6.38:
kernel26-2.6.38.2
kernel26-2.6.38.3
which version did you update to?
I had a problem with the latest update: my computer got a total freeze after being on for just about twenty minutes tops. I'm not sure of what exactly triggered the freeze. I also use the x64 arch version. Everything stops working, None of the regular escape keys work and I think since I still didnt configure ACPI very well, power button wont shut my laptop down. I have to disconnect the battery to start again.
Did anyone else have this problem? Is there anything I can do to test it and help someone correct the release?
It is possible that it has something to do with the wireless module being used at the time, but I didn't have any wired connection to make the test.
Regards!
Last edited by tositstill (2011-04-22 22:12:14)

HP 175nw Problems with Wireless Network Connection - Mac OS X 10.8.3

Please help!
I have an HP 175nw, from one day to the next it decided it was no longer going to connect to the wirless connection.
I run a Mac on 0S X 10.8.3.
I can't find the installation software (the whole software not just the driver) on the web and the CD is worthless b/c this is a Mac.
I installed the printer on my windows laptop and it works fine, it connected to the wireless network using the setting sets on my laptop, it now prints wireless no problem, but not with the Mac.
I have plugged the printer directly into the Mac but the Mac doesn't even seem to recognize it. The printer shows up on my printer list but when I try to print or scan from it the Mac says the printer is offline.
I need this printer/scanner for work desperately, Any ideas would be greatly appreciated.

First, download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Next, download and install this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-107394-1&cc=us&dlc=en&lc=en...
What router are you using?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

[Solved] help needed with wireless setup (ralink 2860 driver)

Hi,
I'm new to Arch so please be gentle ;-)
I recently upgraded hoping to find improved support for my wireless. I now find that the kernel recognises and loads the appropriate module:
[root@akoya ~]# uname -a
Linux akoya 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686 Pentium(R)
[root@akoya ~]# lspci | grep Net
05:00.0 Network controller: RaLink RT2860
[root@akoya ~]# lsmod | grep 2860
rt2860sta 514808 1
I checked over the kernel source and the rt2680sta module is the code from ralink cleaned up for the 2.6.29 kernel. (I tried building the ralink release but it needs patching for 2.6.29)
However getting the thing to connect using WPA is another thing altogether
[root@akoya ~]# ifconfig ra0 up
[root@akoya ~]# wpa_supplicant -B -Dwext -i ra0 -c /etc/wpa_supplicant.conf
[root@akoya ~]# dhcpcd ra0
ra0: dhcpcd 4.0.12 starting
ra0: waiting for carrier
ra0: timed out
I'm not even sure if iwconfig is communicating with this driver (though I can find my router using "iwlist ra0 scan"):
[root@akoya ~]# iwconfig ra0 essid "sodor"
[root@akoya ~]# iwconfig
ra0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA"
Mode:Auto Frequency=2.412 GHz Access Point: 00:21:91:FE:DA:97
And if I try to configure using wicd I see the following log when trying to connect to the wireless:
2009/04/17 01:16:43 :: Connecting to wireless network sodor
2009/04/17 01:16:43 :: Putting interface down
2009/04/17 01:16:43 :: ifconfig ra0 down
2009/04/17 01:16:43 :: Releasing DHCP leases...
2009/04/17 01:16:43 :: Setting false IP...
2009/04/17 01:16:43 :: ifconfig ra0 0.0.0.0
2009/04/17 01:16:43 :: ifconfig eth0 0.0.0.0
2009/04/17 01:16:43 :: Stopping wpa_supplicant and any DHCP clients
2009/04/17 01:16:43 :: killall wpa_supplicant
2009/04/17 01:16:43 :: Flushing the routing table...
2009/04/17 01:16:43 :: route del dev ra0
2009/04/17 01:16:43 :: route del dev eth0
2009/04/17 01:16:43 :: Attempting to authenticate...
2009/04/17 01:16:43 :: ['wpa_supplicant', '-B', '-i', 'ra0', '-c', '/var/lib/wicd/configurations/002191feda97', '-D', 'wext']
2009/04/17 01:16:43 :: Putting interface up...
2009/04/17 01:16:43 :: ifconfig ra0 up
2009/04/17 01:16:43 :: iwconfig ra0 mode Managed
2009/04/17 01:16:43 :: ['iwconfig', 'ra0', 'essid', 'sodor', 'channel', '1', 'ap', '00:21:91:FE:DA:97']
2009/04/17 01:16:43 :: WPA_CLI RESULT IS None
2009/04/17 01:16:43 :: Failed to find status in wpa_cli result
2009/04/17 01:16:43 :: exiting connection thread
It is driving me crazy being tied to a cable so I'd really like to get this working... but I'm really not sure what to try. Do I need to rebuild wpa_supplicant? If so is there a package-based way of doing that in arch?
Thanks in advance.
Last edited by drandre (2009-04-17 19:40:41)

drandre wrote:
If so is there a package-based way of doing that
OK... to answer my own questions ...
two questions:
1. Does this mean support for the ralink driver is included by default or *not* included by default?
It seems it means *not*
2. If I uncomment this line then makepkg refuses to build the package because the config file's md5 is no longer valid. How then am I *meant* to make modifications to the build configuration?
right or wrong I used makepkg -g to generate checksums for my modified config file and pasted these into PKGBUILD. It then builds happily. After installing I can run wpa_supplicant with no args and confirm ralink is in the list of drivers. Excellent. But still no success.
Two things I have noticed:
1. wicd places quotes "" around my pre-shared key. If I run wpa_supplicant from the command line and use the conf file created by wicd it reports the PSK as being unparsable. If I remove the quotes then the file is parsed correctly.
2. It doesn't solve my problem :-(

Enter in my iphone with wireless network

Hi,
because of the serious problem for all Ubuntu owner, iphone 5 (in my case 5c) with iOs7 is unable.
After trying a lot, I think for another alternative mode to syncronize my photos in iPhone with my Ubuntu pc.
I'm at home and I use my wireless network... so is it possibile to recognize my iphone through my network as I did with my old Xperia?
I saw it in the network and I entered in it through this method.
Thanx
Chiara

There is no version of iTunes for any version of Linux, so you will get no native synchronization from your Ubuntu system to your iPhone. Some people have reported limited success running the Windows version under the WINE emulator, so you can look for assistance on a web site related to Ubuntu and perhaps be able to get things working.
Otherwise, you may have to email your photos to yourself and pick them up on your computer. It's also possible that there would be a third-party app that could transfer your photos to your computer via WiFi or a cloud-based services, though I'm not aware of any. Perhaps someone else here will have a suggestion.
Regards.

Macbook Air has trouble connecting immediately with wireless network

My Macbook Air seems takes a while to find the wireless network (but it does eventually find it). I get several "No Internet Connection" dialogue error boxes before the computer finally finds the network. How do I get rid of this and why is it doing it? My MacPro works just fine finding the wireless network.

From your signature it seems you didn't upgrade to Snow Leopard. If not, that could solve your problem. I had exactly the same issue under Leopard, but upgrading to Snow Leopard solved it completely.

X201 running Windows 7 Home Premium problem with wireless network adaptor

my x201 shows that my wireless is on and my wireless network is available. it keeps trying to connect but is not able to hold a connection (continuously trying and failing). i'm on windows 7, 32 bit, home premium. i downloaded the latest update for the intel wireless today but it's still not working. any ideas?

1) This could be a software problem, so try to uninstall the Wireless card software, and reinstall.
2) If that fails, then try to do an OS reinstall.
3) If OS reinstall fails, then it is a hardware problem, which most likely you need it replaced (if you are under warranty, then call the warranty support, if not then you can source a Lenovo branded wireless card for your machine).
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

T520 problem with Wireless Network Connection Adaptors

I was in Windows 7 Device Manager's Network Connections trying to fix a minor WIFI problem by uninstalling the drivers and then scanning for hardware changes to reinstall them. I uninstalled a driver that the scan didn't pick up to reinstall, and I didn't write down its name. Now the WIFI does not work at all. I've updated the two drivers left in Network Adapters:
Intel 82579LM Gigabit Network Connection for my ethernet
Intel Centrino Ultimate-N 6300 AGN for my WIFI
Does anyone know the name of the wireless driver I uninstalled? Does the 520 require two wireless network adaptor drivers? Can't seem to find info on it anywhere!
What I've done:
I ran Intel's PROSet/Wireless WiFi Connection Utility diagnostic tools. The hardware test fails saying "Wireles Hardware is not boudn to transport driver". The Driver Test passed saying "Driver is loaded. Netwsw00 Version: 15.4.1.1. The Radio Test failed saying "Failure geting network radio status!". After that the Scant Test, Asociation Test, Authentificaiton Test, Siganl Test and Ping Test all failed.
Installed every 64 bit LAN wireless network adaptor driver I could find in the T520 section of Lenovo's site
Any assistance appreciated. I'm a bit of a noob.
Thanks
T520 4239 CTO
Windows 7 Home Premium 64 bit

Here is the list.
Try scan for new devices in Device manager otherwise you likely have to reinstall the package again.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3
Attachments:
NA.jpg ‏29 KB

Help setting up wireless network with Verizon DSL

I bought a MacBook Pro and an Air Port Extreme yesterday. I have an iMAC G5 from October 2004. I have Verizon DSL service and a Westell Series 6100 modem.
Bottom line --> I can't get the wireless connection to work.
I have successfully used a wired dsl connection with my iMAC G5. But, I tried to just disconnect the ethernet cable from my computer and put it into the Airport Extreme and that didn't work. I used the utility to set up the base station and the network, but I'm not sure if I did it properly.
I know a PPPoE is involved but I'm not sure of how to configure the system properly. I'm also not sure if the problem is with the configuration of the AirPort extreme or with my Verizon modem.
All I know is that I want to see a green light on that thing and not a flashing orange one.
Does any one have some instructions for setting up your AirPort Extreme using Verizon DSL? Has anyone else had similar problems? Thanks in advance!
MacBook Pro & iMAC G% Mac OS X (10.4.9)

Just finished solving this problem. I am not a strong tech guy, but I know that since it works for others it is just a question of poking and pushing. Anyway it was nine hours in the making...
My snow airport working with an airport express had been bullet proof with verizon dsl for a couple of years. I wanted to upgrade since I am now Intel mac and hit the blinking amber light.
I am only going to be able to give the big picture... The AEBS found and worked with all my computers from the beginning, so the problem became that the default IP Address and Subnet Mask were wrong and never automatically adjusted by the assistants.
Take your working plug-in ethernet connections or the working snow connections from the Airport Utility Internet Connect page. I used the manual configure process to access the info screens.
I copied all the numbers down, but I believe you only have to insert the IP Address, Subnet Mask, Router Address and DNS servers. I put "dsl.verizon.net" in the domain search box.
Go up to the IPv4 pull down menu and select manual and put in the numbers you copied. Then click Update. When the software returns control, the AEBS will still be orange.
Toggle the IPv4 to "using DHCP" Click Update.
This should bring the green light.
I think I then updated the Network Preference Pane, probably had to manually put in my wireless password again. Browser and mail program worked.
I think that was all. I may have had to repeat the toggle to make it stick, but I am operational for the last several hours, including the airport express, a G4 laptop and a Sony PC.
Hope this helps.
Rpbert

Need Help Connecting New MacBook Pro with Wireless Network Password

Hi Linksys Community,
I would like to ask for your help and advice.
I recently purchased a new MacBook Pro, OS X, Version 10.8.3.
I need to setup a password to the wireless internet network (I've successfully done this)
I have a Wireless G, WRT54G Router.
When I setup the password, I'm not able to connect to the internet with my new MacBook Pro, which is running Mac OS X Version 10.8.3. I get the message 'cannot connect to Internet, connection timeout) However, I'm able to connect to the internet with an older MacBook Pro, and my iPad. The password works fine with other models.
Would anyone be able to help me troubleshoot what is going on, or how I can solve this problem?
I would like to be able to have a password on my network, and use the internet with my new MacBook Pro.
I have read about manually adding in the MAC address of computers, and setting up a Wireless MAC fiter.
Does anyone think this would solve the problem? if so, how can I find out the MAC address of my MacBook Pro?
Thanks in advance for you help and time!

Hi,
Thanks for your response.
Yes, my computer connects when your network is open (no password set)?
I used WPA Pre-Shared Key.
Do you know how I could check if my new MacBook Pro is compatible with this?
Thanks!

Itunes 7.4.1.2 interfering with wireless network

This is a weird one, i hope someone can help!!
I upgraded my ipod the other day to an 80Gb ipod classic (6th gen) and so i had to upgrade to the lastest version of iTunes. Having done this, 8 times out of 10 when i eject my iPod from within iTunes my wireless connection disconnects and if i try to view available wireless connections it cannot find any!! If i disable and re enable my network connection then it reconnects automatically. I have a USB Belkin wireless adapter and i am running the latest driver ..I also have all the latest Windows updates installed, and advice would be appreciated!
Cheers
James

anyone else have any thoughts on this? I am an IT consultant so i have checked the basics but i dont know a huge amount about how the hardware side of things works.... is there any way it could be something to do with me removing the ipod without ejecting it? I have tried to do some tests to check but it happens so infrequently that its difficult ... its just annoying!!! I am going to try and test it with a PCI wireless card instead of USB at some point as well....

Help me with wireless network

Similar Messages

Maybe you are looking for