Help! My MacBook Pro won't go online

My MacBook Pro is connected to my home's wifi, but it doesn't go online. Every time i try to use safari it just stays blank, it won't go to any website. My family's PCs work just fine. I already tried from restarting my Mac to disconnecting my router and modem. Suggestions?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • I'm connected to Wi-Fi, but my NEW MacBook Pro won't come online.  This happened right after I transferred my data from my old Mac.

    I'm connected to Wi-Fi, but my NEW MacBook Pro won't come online.  This happened right after I transferred my data from my old Mac.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • Please help, my macbook pro won't boot

    Hey there, i need help
    My macbook pro wont start, so after i press the power button, the apple logo will pop out with a rotating circle below the logo, and there's also a bar below, but in my case that bar will only run til almost complete (there's only about 0.1cm left) and it'll suddenly go off
    I've tried to use Safe Mode boot and fsck -fy, they didn't work.
    I've also tried to enter the Disk Utility and repair the hd, but it keeps on experiencing error, it says "Error: Disk Utility can't repair this disk ...." for both the TOSHIBA and Macintosh HD
    From what i remember i haven't ever used the Time Machine backup before
    How do i fix this without losing my files? I have bunch of important projects there and i need to finish them soon
    Please help, thank you

    Hi srhnizomi,
    If your Mac will not boot past the grey Apple screen, you may find the following article helpful:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    Regards,
    - Brenden

  • HELP! macbook pro won't boot correctly!

    Hello all, I hope someone can help!
    I bought my Macbook pro a couple of months ago and everything has been running smoothly.
    The other day when I was trying to connect my Macbook to my LCD TV, my system froze and became unresponsive. I turned the Macbook off by holding the power button. When turning it back on I had some kernel failure or something - I have tried all of the options given to me by the Mac OS X Utilities and have even gone as far as to erase everything from my HDD and reinstall Mac OSX - I have done this twice and still the same error comes up and I cannot boot my system.
    Unfortunately I had not backed up my data, but as it is a relatively new Macbook I have not lost anything of importance - I would like to get it back up and running however!
    The error message I am getting is the following (someone please help!):
    panic(cpu 0 caller 0xffffff8005c902a): "imageboot_mount_image: di_root_image failed: 109\n@@SourceCache/xnu/xnu-1699.24.23/bsd/kern/imageboot.c:142
    Debugger called: <panic>
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80e2f83d50 : 0xffffff8000220702
    0xffffff80e2f83dd0 : 0xffffff80005c902a
    0xffffff80e2f83e10 : 0xffffff80005c92fe
    0xffffff80e2f83e30 : 0xffffff80006fb5cd
    0xffffff80e2f83f90 : 0xffffff8000233210
    0xffffff80e2f83fb0 : 0xffffff8000820057
    BSD process name corresponding to current thread: kernel_task
    Boot args: config="\Mac OS X Install Data\com.apple.Boot" container-dmg=file:///Mac%200S%20X%20Install%20Data/InstallESD.dmg root-dmg=file:///BaseSystem.dmg
    Mac OS version:
    Not yet set
    Kernel version:
    Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
    Kernel UUID: 7B6546C7-70E8-3ED8-A6C3-C927E4D3D0D6
    System model name: MacBookPro8, 2 (Mac-xxxxxxxxxxxxxxx)
    System uptime in nanoseconds: 20315936366

    Kernal panics are usually hardware related.  You make no mention if you tried to get rid of the issue by disconnecting your computer from the tv.
    Mac OS X 10.7 Help: If “You need to restart your computer” appears
    Kernel Panics? Don't panic too!
    Mac OS X (10.7), OS is OS X but version guessed
    Apple/About This Mac - the window will tell you which os version.  If you are not updated to 10.7.4, use Software Update to update your os and anything else that needs to be updated.

  • Help, my macbook pro won't start anymore

    Hello all,
    I have had some issues with my macbook pro lately:
    A few weeks ago, my Macbook started freezing and making alarm sounds. I didn't do anything about it because it happened only a few times per week.
    Suddenly it happened 4 or 5 times in a row, and after x times my Macbook wouldn't go past the grey start-up screen (Apple logo loading). So I was unable to login.
    I solved the ''issue'' by erasing the disk. My Macbook worked again, but all data was gone. The freezing issue was gone as well.
    But 2 days ago, it started.. again. And today, my Macbook suddenly crashed/shut down. Now, I am not even able to start my macbook. It doesn't show anything, if I press the power button, nothing happens.
    I did a SMC reset, and my Macbook worked, but only for 15 minutes. It just happened again. Something is clearly wrong and I don't know what.
    Sometimes, my Macbook instanly freezed when I connected the power cord. And I think the power cord is broken, last few days it barely charged the Macbook.
    Please help : (.
    Stores close in 2 hours (9 PM), and I need to find a solution. What do I need to replace and buy?
    **PLEASE HELP**

    - The memory you are talking about, that's the same as RAM right?
    Yes.
    It's unclear whether you did anything with the memory or not, but even if you didn't, even a Mac's originally installed RAM could fail and cause the exact symptoms you describe. To test memory you can use Apple Hardware Test, though only a report of a failure can be considered definitive.
    Also, I checked my magsafe, and the 2 power connectors are a little bit curved/bent. I am planning on buying a new Magsafe + new RAM (memory?). I think that will fix it?
    I don't know, but it's not a good idea to use a power adapter or a MagSafe connector that you know is damaged.
    For a definitive diagnosis it would be best to take your Mac to an Apple Store for evaluation. Schedule an appointment. Bring your power adapter. Even if you have to purchase a new power adapter there, the price isn't very different than you are likely to find anywhere else. Counterfeit, non-Apple power adapters can be hazardous to you, your Mac, your property, or all three, so buy it from Apple.
    Memory on the other hand is another story. You can purchase RAM guaranteed to work from one of two vendors known to support Macs - Crucial or OWC / MacSales - much cheaper than from Apple.

  • I need Help. Macbook Pro won't install updates from the Mac App Store.

    I am trying to update Evernote App on my Macbook Pro but instead I get this message,
    "MZCommerce.JmsSendError_messageMZCommerce.JmsSendError_message"
    What is going on? Can someone help me?

    Hello, several people are reporting the same problem, a few fixes here, but nothing consistant...
    https://discussions.apple.com/thread/4517675?tstart=0

  • HELP MY MACBOOK PRO WON'T START UP

    Help! I was using my MacBook Pro halfway and it suddenly turned off! My battery was flat when I turned on and so it shut down and then I turned it on again while charging. It was working perfectly fine then until this happened. Then there was problem with my charger. It was flickering very dim green to orange. It's still under warranty so I brought it down to the service center to get it fixed. I'm quite worried that there might be a problem with my HD as this laptop is for my school hence there's a lot of important data inside. I don't do back ups hence I'm doomed! Do you think there's a problem with the motherboard/logic board or the hard drive itself?

    Hey there Jesstasmin,
    I see that you are getting a gray screen upon startup of your Mac. I have an article that will help you address and troubleshoot this issue effectively:
    Mac OS X: Gray screen appears during startup - Apple Support
    http://support.apple.com/en-us/ts2570
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Help! macbook pro won't start up, horrible beep + error

    When I start up my mac I get a horrible beep from the os x.
    I already buyed myself a new battery
    I made a picture of the error.
    Can please someone tell me what to do?
    my mac: macbook pro early 2009. 2.66 ghz

    hello,
    I went back home 2 get the discs
    The first methode ( throw windows) didnt work for me
    So I booted mac again. I hold down the C button to get 2 the install disc.
    ( i hoped I didnt get the beep or the error screen)
    Thankfully it started (after holding c button) my installation disc. @ the moment Im erasing the whole drive. ( i already have a backup of the important files )
    Thank you for your help and time. I almost buyed a new hard drive because I thought the harddrive is probably broken.

  • Help! Macbook Pro won't power up!

    Hi, I have a new 2011 MBP 15" (1.5 months old).
    When its up and running it works fine, and I'm able to shut down and restart it normally. As soon as I leave it off for more than a few hours (usually this happens overnight when I shut down the computer before going to bed)
    The next morning the computer won't power up at all. When I press the power button I can hear something whirring/spinning and then 3-5 secs later the power just cuts off. The screen doesn't even light up, I don't get to hear the apple chime at all. Repeated attempts to power up the system get this same result.
    I suspected it was due to cold weather (winter in Perth now). I find that every cold morning if i warmed up my macbook placing it near the heater, it will be able to boot normally after it has warmed up. But if ever the machine gets a chance to cool down, it goes into a coma? This happens when I put the mac to sleep and am away from it for more than an hour, it won't wake up!
    This is so dissapointing to come from a product that comes at such a premium price. I hope I can get some help on this! It's really really frustrating.
    I am reset the PRAM and SMC several times and they dont seem to do the trick. I ran the apple hardware tests, even in extended mode and they all detect no problems. Hellpppp

    How cold is cold where your MBP is? In any case take it to an Apple store or AASP. If none availanle call AppleCare.

  • Help! Macbook Pro won't recognize display after 10.5.7 update!

    I installed the 10.5.7 Combo update today and got caught in the blue screen restarting loop that everyone else was talking about. After about 15 minutes, I decided to do a cold restart of the computer. The computer boots up but the display will not turn on.
    I've screen-shared into the computer and can see that the computer doesn't recognize any display whatsoever. I've done all the usuals — resetting PR RAM, SMC resets, reinstalling 10.5.7 remotely, etc. Nothing works.
    Anyone have any help they could offer? Thanks a lot.

    Sure wish you could delete a post on these forums after you've played a joke.

  • HELP! MacBook Pro won't turn on - loads up to the grey loading screen for a while then crashes., HELP! MacBook Pro won't turn on - loads up to the grey loading screen for a while then crashes.

    Was using it fine then I rested my iPad mini on the keys and the screen went black and then came back but then froze for a little bit the audio went then after a bit it turned it self off and when I try and turn it on its loads to the grey loading screen loads for a bit then crashes - please help, I have got very important data on there that I need to access, thank you.
    (PS I have booked a genius appointment for 3 days time but really need to use it before then)

    No backups? Then I would, were I you, definitely order an inexpensive USB enclosure to try to rescue the files. Most companies in the US ship to the Phillipines, don't they? Where do you usually shop for computer gear? I don't know how much space/speed you really want but Seagate's 1 terabyte SSHD is an economic route to go for the 'feeling' of a SSD. I can also recommend Hitachi and Toshiba drives.
    Just make certain that you get the right form factor - 2.5" x 9.5mm. You can get drives a bit thinner and a bit thicker, but I would stay close to that thickness range at any rate.
    Good luck,
    Clinton

  • My Macbook Pro won't boot up, only in safe mode!

    Help, my macbook pro won't restart, only in safe mode! and it seems that safe mode has plenty of implications for use.  my usb memory stick doesn't seem to be recognized while in safe mode.  I was doing a cleanup on mackeeper just after I downloaded a trial version of microsoft office mac.  The trial wouldn't work properly so I deleted it and decided to do a cleanup with mackeeper.  than the mac froze while mackeeper was doing it's cleanup and the screen flashed black a few times.  Ever since it won't boot up unless I use safe mode.  Also, I downloaded the most recent updates while in safe mode but it doesn't seem to be recognizing that I already downloaded them because software update is still telling me that I have 6 updates.  So I am horribly confused at this point.  Please help, I need this laptop to do report cards (it's a good thing I got an extension). thanks

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in safe mode.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    The commands may line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Triple-click the line of text below to select it. Copy the selected text to the Clipboard (command-C). Then click anywhere in the Terminal window and paste (command-V).
    find /Sy*/L*/Ex* -type f -name Info.plist -exec sh -c '/usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$1" 2> /dev/null | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo ${1%*.kext/*}.kext' {} {} \;
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 3
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, these steps are all copy-and-paste — no typing. Also remember to post the output.
    You can then quit Terminal.

  • MacBook Pro won't connect to home wifi, but will connect to other networks

    Help! MacBook Pro won't connect to home wifi but will connect to other networks. Others can connect to my home network. I've tried diagnostics, resetting the router, restarting my computer, and forgetting the network and then trying to access it. Nothing works.

    Hey Brittany, 
    Welcome to Apple Support Communities.
    It sounds like you’ve done quite a bit of troubleshooting to try and resolve the issue with your MacBook Pro not connecting to your Wi-Fi network. If you haven’t already, take a look at the article linked below which provides some additional troubleshooting suggestions that may help you resolve the issue.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
    So long,
    -Jason

  • Hi! My MacBook Pro won't start! HELP !!!

    Hi! My MacBook Pro won't start! I have tried everything I can think of like Safe Mode (doesn't work), Recovery (does not find Recovery Drive), Booting with OS Snow Leopard Cd (doesn't work)...
    I have really no clue about what to do now... I paid quite a lot of money for this computer and am pretty short of money nowadays! Would like to repair with help rather than having to take it to Apple Store.
    Has anyone had this same problem? 
    All I get is white screen + grey Apple and spinning grey disk...  it's 100% frustrating! Any help would be more than welcome since I think i've tried EVERY SUGGESTION on this Support Center and Youtube videos...
    This MBP is from 2011, runs on OS X 10.6.8
    I tried booting with OS X Snow Leopard CD, it didn't work!  (my cd player works! recognizes the Snow Leopard CD, but then never opens it... goes back forever to the with screen + apple and spinning disk)
    I don't care about the content, it's OK if i lose all DATA... I just want to bring this Mac BACK TO LIFE!
    When i run coomand on root# fsck -fy  --> RESULT = my HD was checked and seems to be FINE!
    Thanks

    Please make a Genius Appointment and take it in for service.

  • I recently did a full reinstall from my time machine and now my MacBook pro won't back up to the time machine. It starts a full backup ignoring the original back up, can anyone help?

    I recently did a full reinstall from my time machine and now my MacBook pro won't back up to the time machine. It starts a full backup ignoring the original back up, can anyone help?

    Did you follow the instructions on the page linked below?
    OS X Yosemite: Recover your entire system

Maybe you are looking for

  • Weird flashing problem - cannot rename any file or folder in Movies

    I have a problem affecting just my Movies folder. Whenever I view it in the Finder, the edge of the Finder window will flash once every four seconds. If I am trying to rename an item within the Movies folder when the flash happens, I get dumped out o

  • How to convert pl/sql block into single update statement

    Dear all gurus, I have pl/sql block mention below, Can I convert this pl/sql block to single update statement if possible? If not how to optimize this block? Pleaese suggest. thanks in advance. Vijay DECLARE CURSOR vt_mlr_cursor IS Select master_key,

  • Does 1Z0-001 fit the requirement of 11g DB OCP requirement (1Z0-051)?

    Dear Sir:    Hi, I would like to ask 3 questions about the certification requirement of 11g DB OCP. Please advice me what do I have to do to prepare the OCP exam, thanks a lot in advance. Q1: Does 1Z0-001 fit the requirement of 11g DB OCP requirement

  • Magic mouse bluetooth problem

    I have a blutooth dongle on my mac. As batteries were getting low in my Magic Mouse I removed the old batteries and put in new charged ones, something I have done numerous times before without a problem. On this occasion I cannot get the mouse to pai

  • Pro Applications Update didn't update

    I had a problem with an error message saying the "file is too new for this version of the software. I have FCP 6 (part of Final Cut Studio 2) I read here that the fix to the problem is an update which I just downloaded and installed, but my FCP 6 was