Help - Need few JARs for Turnkey installation

A couple of JAR/EAR files missing for turnkey installation.
Can someone copy these JARs from your trial installation and share them across?
Please find the below screenshot showing the list of missing files..
These files can be searched within ES2 installation folder. e.g. C:\Adobe\Adobe LiveCycle ES2\deploy
Thanks,
Nith

Thanks a lot for your reply. I downloaded few packages from Sun freeware website. My issue is when i installed emacs-23.1-sol10-sparc-local.gz which i downloaded from SUN freeware website installs SMCemacs. My required package is SFWemacs. Similar scenarios persist for few more packages. So if you know where i can get the following packages apart from Sun website and Sun freeware website:
IS94de812
ISCbemBui
ISCbemCli
ISCsmMult
ISHelpMul
ISJavaMul
ISLockhar
ISSadeCli
ISSsmMult
ISSunStor
ISa974c6c
IScbembui
IScbemcli
ISd4d0026
ISfb91cb1
ISjavaAss
ISonlineh
ISsadecli
NBSMpre
SFWxaw3d
SFWungif
SFWtop
SFWemacs
SFWgcmn
SFWlexpt
SFWncur
SFWrsync
SMCgtk+
SUNWc2540
SUNWc6130
SUNWc6140
SUNWc6540
SUNWced.2
SUNWdc
SUNWfruip
SUNWpsvrr
SUNWpsvru
SUNWstc
Thanks,
Ram.

Similar Messages

Need Few Jars for RAS Server use!!!

com.crystaldecisions.sdk.occa.infostore.*,
com.crystaldecisions.sdk.plugin.desktop.common.*,
com.crystaldecisions.sdk.framework.*,
com.crystaldecisions.sdk.occa.security.*,
com.crystaldecisions.sdk.exception.SDKException,
com.crystaldecisions.sdk.occa.managedreports.IReportSourceFactory,
java.util.Locale,
com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"
Hi all,
The above mention are few classes available in some jars.
Can anbody help me to find and download those Jars.
Thanks in advance,
Saravanakumar.

Could you not save money and buy a photon for use with your existing server? You could install 2 HBAs and use it in split bus mode.
For true redundancy however, you need 2 servers ideally in 2 locations. ;o)

Need WebLogic.jar for download

I need WebLogic.jar for development .Kindly let me no from where can i get?

Go to support.oracle.com
Search for document id 763603.1
OR
edelivery.oracle.com and use the BEA WebLogic Media Pack
Did you try creating a wlfullclient.jar?
http://download.oracle.com/docs/cd/E14571_01/web.1111/e13717/jarbuilder.htm#BABCGHFH

Need more steps for EP installation

Dear All,
after installation the Enter Prise Portal, what r the steps r required.
how to run the portal with system administration.
EX: ep 7.0 sp14 with communucation users -
please provide the steps.
Thanks in advance.
Thanks & Regards,
Kaleem.

Hi Mohammed,
I will not go into much detail as you can find the require in the Portal Administration Guide link below. After you have install Portal, look into the part with: http://help.sap.com/saphelp_nw70/helpdata/EN/c4/a35f40a25eef6fe10000000a1550b0/frameset.htm
1) Fi[First Steps (Logging On to/Off the Portal, The Portal Interface, Personalizing Your Portal)|http://help.sap.com/saphelp_nw70/helpdata/EN/fa/45df3df2ad685ae10000000a11405a/content.htm]SAP NetWeaver Portal is both a development and a runtime environment. This document describes the interface with which you will be working and gives an overview of the initial tasks that you need to perform as a portal administrator.
After installing SAP NetWeaver Portal, you can log on to personalize your own portal environment and to begin creating a custom portal for deployment in your enterprise.
2) [Initial Configuration Tasks |http://help.sap.com/saphelp_nw70/helpdata/EN/46/a660054ad945158e5021155bca3495/content.htm]
This section provides a set of initial tasks you should perform in the portal after you have installed it and successfully logged on for the first time. A reference to where you can find detailed information for each task is specified.
a) Perform the mandatory tasks. See Mandatory Tasks.
b) Analyze the optional tasks and perform those that are relevant to your system landscape. See Optional Tasks.
Regarding your question on how to run the Portal with System Administration, check out details on Super Administration:
http://help.sap.com/saphelp_nw70/helpdata/EN/5a/0338f80c0b11d7b84800047582c9f7/content.htm
3) [Standard Portal Content|http://help.sap.com/saphelp_nw70/helpdata/EN/5a/09c0756c2d4ba5a8b5c6d4ef120304/content.htm]
This section describes the roles and content shipped with the portal. It does not cover standard content that is specific to other portal add-on capabilities, such knowledge management and collaboration.
4) [User Administration|http://help.sap.com/saphelp_nw70/helpdata/EN/59/bf2287b3cb5e48af94f99929ad15b9/content.htm]
The user administrator performs all tasks that are relevant to user management and role assignments. In the portal, all user management functions related to users and groups are provided by the user management engine (UME). The UME is integrated in the SAP NetWeaver Application Server (AS) Java.In addition, you can find information about administration functions that are specific to the portal. These are: Assigning roles to users and groups; Mapping users u2013 for Single Sign-On purposes
5) [Content Administration |http://help.sap.com/saphelp_nw70/helpdata/EN/5a/0339000c0b11d7b84800047582c9f7/content.htm]
The content administrator is responsible for all tasks that are relevant to content creation and maintenance directly in the portal.
6) [System Administration|http://help.sap.com/saphelp_nw70/helpdata/EN/5a/0339040c0b11d7b84800047582c9f7/content.htm]
The system administrator is responsible for the configuration and ongoing support of the portal and its landscape. This role therefore contains configuration, maintenance, and support related functionalities.
The above are some basic steps you can take after Portal installation. Go through the help.sap documents and you can identify which steps you can start with and plan the needed steps require.
Hope that helps and award points for helpful suggestions.
Ray

Need 1GB RAM for Partial Installation

I want to install DW, PS, Bridge on this computer, but PP,
AE, Encore on a
second computer. Do I still need 1GB of RAM for the
installation? (I have
896)

On Sun, 26 Aug 2007 14:04:10 -0500, "KJones"
<[email protected]> wrote:
>I want to install DW, PS, Bridge on this computer, but
PP, AE, Encore on a
>second computer. Do I still need 1GB of RAM for the
installation? (I have
>896)
>
They say 512Mb here:
http://www.adobe.com/products/dreamweaver/systemreqs/
I run on about 900M and it is fine - if a little slow on some
activities - I'm thinking of putting another block of memory
in.
~Malcolm N....
~

Help needed from Adobe for unauthorised activity on my account

Help please!
I bought some education software from an Adobe supplier on the recommendation of my school. It turns out (without me knowing or being told when I placed the order) that I was being sold old software, at what he now claims was cost price (interesting as I subsequently bought the next version for just $30 more). I have not been able to register that software as it was the wrong version for my region, and after a month of trying I asked for a refund.
He is now accessing my account, (probably from a link in an email i sent him!!) and is trying to get the software he sold me registered so he doesn't have to refund me!
Okay, so bad enough that I have hassles with this "person" but worse that he has access to my account and I seem unable to change this.
This whole process has been a nightmare!! I need to close two open cases immediately but can't get hold of Adobe by phone or on chat!!! Help please!

You should be able to contact chat support from http://adobe.ly/yxj0t6

Help needed in BAPI for uploading data in FB01 - Urgent!!!

Hi,
    i need to post a document in FB01.
i am getting the following details from the user in a .CSV file.
Vendor no, vendor name, amount, document date, posting datem reference vendor line item text and Gl account line item text.
i am using BAPI BAPI_ACC_DOCUMENT_POST to post the document.
Now my req is if the amount is in negative then
   use posting key 31 against the vendor and 40 for GL account
if its positive amounts
use posting key of 24 against vendor and 50 against the GL account.
Now by default, when the amount is negative the function is working fine.
                but when its is positive its posting 21 against vendor and 50 against GL account. but i need 24 against vendor
can any one tel me, where should i pass these value in the BAPI?
or is there any other way of doing it?
Regards,
Niyaz

Hi,
the posting keys 31/21 (01/11 and 40/50) are hard coded and cannot be populated from the interface. This is because a different posting key could have a different posting logic from what is implemented in the BAPI.
So unless you want to do some modifications here, you have to use the fixed PKs. Pls. let me know if you are interested in where exactly the PKs are defined (hardcoded). I have this noticed for myself earlier but my notices are on another PC
Hope that helps, points welcome
Csaba

Help needed with jar file

hi, first of all sorry if my post is in wrong forum...but my application is done using swing so i am posting this here....and regarding my question...
I have made an GUI using Java swings and my application is working fine. Now i want to make an executable jar file for my GUI. I have read some tutorilas on making jar files and this is what i have done...
i have created a manifest file called mainClass.txt which has
Main-Class: MainWindow ,where MainWindow is my main class name.
Then i ran the jar utility with this command line:
jar cmf mainClass.txt example.jar *.class
With this line, I told jar to create a JAR file (option c) with modifications to the manifest file (option m) as specified within mainClass.txt, naming the JAR file (option f) as example.jar and including everything that matches the pattern *Class
everything is file till now but my problem is ...I have some library files from JFreechart software included in my GUI to generate barcharts..How can i include these library files in my example.jar file..
Kindly help me
Thanks
byee

I had this problem too. I ran my program out of JCreator and it worked flawlessly. I jarred it up into and Executable Jar and I would get a runtime error explaning I have not included the correct libraries.
What I did was look at the error, for example say it said something like:
org.uhoh.PathSys ClassDefNotFound (or something similar to this)
What I did was extract the library that contained that class file. Then in my project file where I kept my classes I made the folder org, then in org I made uhoh. Inside uhoh I copied over PathSys.class.
I hope I addressed the problem you speak of. I am only a novice but this is how I figured it out. If anyone knows a better way let us know =D

Help Needed: Automator Applescript for Folder Action - Encode Video

Hi !
I have created an Automator Applescript for a Folder Action to do the following:
When a new video file is moved to the target folder (i.e. Download of Vuze is done), automatically launch the Applescript Action that does the followin g(Applescripted):
1) Using "run shell script" and FFMPEG on a UNIX command line, determine Width/Height, Framerate, Bitrate
2) Calculate encoding parameters (slightly reduced bitrate, reduced Aspect etc.)
3) Using "run shell script" with ffmpeg on the command line and the calculated parameters to encode the video file
At the same time, the action is written to a log file so I know if a file is recognized, when encoding started etc.
It works fine if I save this Action as an .app, make an alias on the Desktop and drop video files on it.
It also works fine if I attach the script to a folder as a folder action and drag a video file in there.
However, when I attach the script as a folder action to the Vuze download folder, it encodes only some video files, i.e. if there was a download of 5 files, chances are good that it will not encode 1 or 2 files out of those 5.
If for example a second download finishes while the encoding for the first download is still going on, sometimes the second file starts encoding after the first encode finishes, sometimes it does not, the file does not make the log file at all, i.e. the folder action missed it or the automator action dropped it because it was still encoding. Still, sometimes it happens, sometimes not.
As I need a solution that is 100% accurate, I would like to ask if there are any ideas on how to do this better maybe? As I am not an Applescript Guru, I would need some help to know what works and what doesn't and what the syntax is.
My main idea right now:
Similar to how ffmpegX works with its "process" application, have a second script (as .app) that receives the files to be encoded from the automator action and puts them in a queue, then proceeds to encode this queue while the main automator action is free to receive the next file.
Writing this second app is quite straightforward (a modified version of my current script) but I have some questions I need help with:
1) How do I call another applescript from within an existing applescript that launches the new applescript in a new process?
2) How do I pass parameters to this new applescript?
3) In case of this "Queueing" Idea, once I called the external applescript the first time, how do I make sure when I call next time, that I don't open a second instance of this script but rather pass another queue item to the original instance to be processed?
Or in general: Is there a better way to achieve this automatic encoding solution that I have not thought about?
Alternatively:
Does anyone know how to call the "process" application that comes with the ffmpegX package with the correct parameters to use as a queueing / processing tool?
Thanks!
Joe
Message was edited by: Joe15000
Message was edited by: Joe15000

To do this, I created an Automator workflow with an Applescript snippet to change the 'media kind'.
Here is the 'Run Applescript' workflow step code:
on run {input, parameters}
          tell application "iTunes"
                    set video kind of (item 1 of input) to movie
          end tell
          return input
end run
Prior to this running, I have an 'Import Files into iTunes' workflow step.
You can switch out 'movie' with: 'TV show', 'music video', or anything in ITLibMediaItemMediaKind.
Good luck,
Glenn

Help needed with DisplayConfigX for Philips 32PW9551/12 CRT TV

Hi everyone,
I've been following this part of Apple Discussions closely for some time now, and I realise that I'm not the only one having trouble connecting my Mac Mini (Core Duo) to my TV. I'm hoping that BSteely or somebody else here could take a look at my specific problem. I'll try to provide as much relevant info as I can, if more input is needed, please specify.
Here goes :
TV model : Philips 32PW9551/12 That's a CRT, but with HDMI input. The manual says that it should accept 480p, 576p, 720p and 1080i.
Cable : DVI-HDMI
Using VNC over Airport when things go wrong, resetting back to the original resolutions.
Problem : can't get 720p resolution to work, only 640x480 fills screen. 640x480 is too low, since Remote Buddy's menu does not even fit on it.
When I select 1280x720 the image is on the left of the TV, leaving a wide black bar on the right and dropping a lot on the right. Other resolutions either don't work at all, are seriously overscanned (no dock, no menu) or are horrible to look at.
I've been fiddling with DisplayConfigX and SwitchResX, but I feel it's out of my league, so I'm not getting anywhere. I did export settings via SwitchResX, I hope that provides some insights.
Thank you very much in advance for helping me get my setup to work by creating a tailormade timing !
Kind regards,
Also Starring
Belgium
DDC block report generated by SwitchResX for display
PhilipsTV
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 | 00 FF FF FF FF FF FF 00 41 0C 51 95 01 01 01 01
1 | 06 10 01 03 80 42 25 78 0A 0D C9 A0 57 47 98 27
2 | 12 48 4C 20 00 00 01 01 01 01 01 01 01 01 01 01
3 | 01 01 01 01 01 01 01 1D 80 D0 72 1C 16 20 10 2C
4 | 25 80 94 72 21 00 00 9E 01 1D 00 72 51 D0 1E 20
5 | 6E 28 55 00 94 72 21 00 00 1E 00 00 00 FD 00 31
6 | 3D 1C 2E 08 00 0A 20 20 20 20 20 20 00 00 00 FC
7 | 00 4C 30 36 48 44 20 76 31 20 31 36 3A 39 01 29
Valid DDC block: checksum passed
EDID Version........1.3
Manufacturer........PHL
Product Code........20885 (5195) (9551)
Serial Number.......16843009
Manufactured........Week 6 of year 2006
Max H Size..........66 cm
Max V Size..........37 cm
Gamma...............2.20
DPMS Supported Features:
Display type:
RGB color display
Input signal & sync:
Digital
Color info:
Red x = 0.625 Green x = 0.280 Blue x = 0.155 White x = 0.283
Red y = 0.340 Green y = 0.595 Blue y = 0.070 White y = 0.298
Established Timings:
640 x 480 @ 60Hz
Manufacturer Reserved Timings:
Standard Timing Identification:
Monitor Description blocks:
Descriptor #0 is Timing definition:
Mode = 1920 x 540 @ 50Hz
H. Active...............1920 pixels
H. Blanking.............720 pixels
V. Active...............540 lines
V. Blanking.............22 lines
HSync Offset............528 pixels
HSync Pulse Width.......44 pixels
VSync Offset............2 lines
VSync Pulse Width.......5 lines
Pixel Clock.............74.25MHz
Horizontal freq.........28.12kHz
Vertical freq...........50.04Hz
H Image Size............660mm
V Image Size............370mm
H Border................0 pixels
V Border................0 lines
Interlaced
Sync: Digital separate with
* Positive vertical polarity
* Positive horizontal polarity
Descriptor #1 is Timing definition:
Mode = 1280 x 720 @ 60Hz
H. Active...............1280 pixels
H. Blanking.............370 pixels
V. Active...............720 lines
V. Blanking.............30 lines
HSync Offset............110 pixels
HSync Pulse Width.......40 pixels
VSync Offset............5 lines
VSync Pulse Width.......5 lines
Pixel Clock.............74.25MHz
Horizontal freq.........45.00kHz
Vertical freq...........60.00Hz
H Image Size............660mm
V Image Size............370mm
H Border................0 pixels
V Border................0 lines
Non-Interlaced
Sync: Digital separate with
* Positive vertical polarity
* Positive horizontal polarity
Descriptor #2 is Monitor limits:
Horizontal frequency range.......28-46 kHz
Vertical frequency range.........49-61 Hz
Maximum bandwidth unspecified
Descriptor #3 is Monitor name:
L06HD v1 16:9
Mini Intel Core Duo Mac OS X (10.4.8)

(1280x594 60Hz NTSC) gives fairly stable
image, big black border on
top, fallen off image on the left but right and
bottom seem ok.
You might want to run with that and see if you can dial it in better. SwitchRes X has arrows you can use in the right-hand side of the custom pane where you can try and center and size the image better.
Another thing. I don't seem to be able to enter the
pixel clock number exactly as you specify. It keeps
changing it slightly. Eg, after rebooting, it says
68,4 in SRX, even though I entered 69,75 before...
This is explained in the SRX documentation. When you make a request of the hardware that it somehow can't satisfy, it just tries to do the next closest thing. But you don't get and feedback of what the hardware can and cannot do. You only get unexpected results as you have mentioned.
And also, should the vertical scan rate not be
exactly 60 Hz ? Other numbers don't seem to be
accepted by the TV, but when making custom timings,
these scan rate numbers seem to be changing all the
time.
If you look at the EDID data you posted at the begining of this thread, towards the bottom it states that your TV will work from with any vertical frequency in the range of 49Hz to 61Hz. You don't need to use 60Hz but that is a standard. There is very little downside to deviating from that with and LCD display.

Help needed with connectors for Netbeans and Forte

Im using Forte for Java
my biggest obstacle is connecting sub j-frames to the main j-frame
i have created a main J-frame and sub j-frames in one package
in the Main J-frame there are buttons that you click to go to the next frame the same way "a-href" in HTML works in the same window and back
what my problem is how to declare the connectors for each button to go to the sub-frame
what code generators are required and the process and how to lable each sub-frame to be called
my project is a finance program
i.e
Main Frame
Menu:- ( TVM) ----------> button
(simple interest)-------> button
etc
when you click the (TVM) button
it should open the TVM frame (subframe in the same window)
this is my problem your help please this is a project which i have a deadline to meet ive done research through out but couldn't come across any useful or relevent material
this is a lot easier with pascal but Forte is a compulsory and java
if you want the screenshots ill post it thru mail just drop your adress and ill forward it
thank you

matt010385 wrote:
Thanks
I have already tried all of the things that site suggests, there is nothing wrong with the servers, or the service, I have tried all the work arounds that they suggest, but I still cannot get it to work.
Having a quick read i see from a link there that you might need to open ports(port forwarding).
Are you using a HH3, if so, I believe that it does have trouble with port forwarding, you can try a search here.
I am not into games as such, so will have to leave it for others to possibly help with some info.
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Help needed with 'Conditions' for field with read only on demand

Hy guys,
I really need your help now, i have two items named P22_LOGIN_TYPE (..wich can be 'Default' or 'Special') and P22_PASSWORD, i need to turn to 'read only' the second item when the first item is 'Default', i'v tryied the conditional option but with no success, i know is managed from there but it's not working for me, it seems that i don't know exactly how to do it. By the way, i have APEX 2.2.
I need an exact guide (explanation) on how to do it, thank you very much.
Best regards,
Victor

Firstly you could set your First item to be a select list with submit. Make the branch go to the same page.
Secondly, on the read-only conditions for your second item, use the condition when item in expression 1 = value in expression 2, and set that to 'Default' in expression 2.
Essentially this will re-submit your page when you make a selection either 'Default' or 'Special'. If 'Default' is selected, then the PASSWORD item will be rendered as read-only. If you don't want to display the PASSWORD item at all, you can put the above condition for the read-only, into the conditions section of the item.
Hope this helps and is not too confusing. It reads a lot worse than it actually is ;)
Cj

Need Oracle DataBase For XI Installation????????

Hi Experts,
Should we Install ORACLE DataBase While Xi Installation????????
With Oracle also Can We do the Installation????????
Here What is the Use of ORACLE Installation?????????????/
Please Let Me Know All the Details............
Regards
Khanna

Hi,
Thanks for ur quick reply.
<i>XI is also an application and yes it does need a database.</i>
In the Real time Where we wil use this Oracle database........
And what is the Link Between the XI And the Oracle DataBase.Where it wil be Xi is going to Use the Oracle DB??????????/Is there Any Connection??????
Can u please Allobarate this .......
Regards
Khanna

Help needed: user exit for CO02

I have a problem with user exit. I need to display an error message when the quantity of a specific component of a material is changed in CO02 and user hits save button.
I inserted my code in include program ZXCO1U01. Based on the material type if the user changes the quantity I will display a message. But the problem is the documentation shows that we cant insert a error message in this exit. Its giving a dump if I do that.
I am calling a new screen to display a message but if I try to execute CO02 again for the same order its displaying error messages as that component will remain locked.
Please help me regarding this.
Thanks

Hi Bobby,
We had similar issue and we have added a code to send an e-mail message to the user is any error occurs.
You can't insert an error meesage in this user exit.
Lanka

Help Need New Driver For MG2100 Where Is It?

I am having a hard time finding the driver for Canon Printer all in one the MG2100 series where is that can not find it please help also when I needed to print out my homegroup setup with password I get a error and it wont print help please ty
Error Code is 2147500037

Hi CynthiaAvey,
Thanks for your reply! We suspect you may have the PIXMA MG2120 printer, which often appears with the the phasing "2100 Series" on the manual and packaging. However, the official model number can be found on the unit itself, typically on or near the control panel. If the PIXMA MG2120 is indeed your printer, you can download the driver from the following page:
http://usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/...
However, if you do have a different printer, or the link above did not allow your PIXMA MG2120 to continue printing, please visit the link below for further assistance. Thanks so much!
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Help - Need few JARs for Turnkey installation

Similar Messages

Maybe you are looking for