Help needed big time

can some 1 pls help i have just got a Apple I Mac Power PC G3 Processor Speed: 333 MHz Memory (RAM): 160 MB i only wanted it for itunes but its come with no software at all and i have got a clue about apple macs what so ever is there anyway of buying the disks i would need to restore and could any 1 point me in the right way of a guide that can help me set this up it Includes OS 9.2 but i real dont no the first thing about them and very keen to learn more if any 1 could help pls thanks apple newbe

If you want to use the iTunes store you will have to upgrade to at least OSX 10.2 (Jaguar), more probably (Panther), or possibly even Tiger (10.4). As I said before, you'll have to double check on the iTunes forum which version is required for the minimum version of iTunes you will need in order to get access to the store.
Although you theoretically have the minimum RAM in order to run Panther, it helps to have at least double what you currently have. A 6 GB drive is also very small for running OSX because not only does the OS require a lot of space for permanent files it also make a lot of temporary files. You might be able to just run the OS but you wouldn't be able to fit any music on the drive!
So right now I'd say you are looking at getting a bigger drive, more RAM, and buying an OS for this computer to do what you want to do. I haven't looked at the used prices for Jaguar or Panther but Tiger is currently going for around $70+ used.
If you didn't want to use the iTunes store you could pretty much use the computer as it is right now (depending upon how much music you have). If you want to do a clean install of OS9 you will have to purchase (used) a retail version OS9 CD which is gold in color (not a gray one).
P.S. It isn't the spelling, which is fine, it is the lack of punctuation that makes it very difficult to read and will discourage others from replying.

Similar Messages

Trigonometry problem- help needed big time!

Hello, thanks for clicking. I am filling in a Flash template
for a client- and the template purchased turned out to be in
Spanish. I don't speak more than 2-3 words of Spanish and I'm stuck
in one place. I don't think Spanish is required to solve the
problem, if you're already good at trig. Can someone please help me
out?
Here is what I need to fix. The "rollaround" menu at the top
of the page here-
http://www.rollwiththetank.com/l2
is not lining up correctly when the 3rd, 4th, and 5th menu
buttons are clicked. Try them out and see what I mean. If this code
was in english I know I would be able to crack it, but as it is I'm
stumped.
Here is the code controlling the rollaround-
Thanks to anyone who can help clue me in on what I'm
missing.

http://translation2.paralink.com/
for the comments anyways....
Sorry I don't speak Spanish either, this is where I go when I
need it

BIG HELP NEEDED BIG TIME!!!!!

my iPod is not turning on for some reason!! No its no on hold, and yes I tried too reset it. Its just completley blacked out! I was sitting there listening to my music then I was going to charge it but, all of a sudden it went blank!
can someone PLEASE help me please!!

First, let's make sure you're resetting properly;
Hold the MENU and SELECT (center) buttons until you see the Apple logo to reset. It may take several attempts and is best performed while connected to power. You may need to hold the two buttons for ten seconds or so before it actually resets.

Hi. Need big time help with PS CS4 crash log

Hi.
My Photoshop CS4 keep crashing on me ones a wile.
I have tried everything now.
Even tried a totally new install. OS X & Creative Suite from beginning.
Still i get a crash ???
Please need some translation fast.. Thank you.
Log file:
Process: Adobe Photoshop CS4 [330]
Path: /Photoprogrammer/Adobe CS4/Adobe Photoshop CS4/Adobe Photoshop CS4.app/Contents/MacOS/Adobe Photoshop CS4
Identifier: com.adobe.Photoshop
Version: 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch]) (11.0)
Code Type: X86 (Native)
Parent Process: launchd [87]
Date/Time: 2009-02-16 19:06:04.791 +0100
OS Version: Mac OS X 10.5.6 (9G66)
Report Version: 6
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000eeea9f96
Crashed Thread: 0
Thread 0 Crashed:
0 libSystem.B.dylib 0xffff07c2 __memcpy + 34 (cpu_capabilities.h:246)
1 com.apple.HIToolbox 0x06bf998e CHandleStream::ReadBytes(void*, long, unsigned char) + 70
2 com.apple.HIToolbox 0x06bebf21 CTextensionIOSuite::SearchIOSuiteType(unsigned long, TDataHeader*, unsigned char) + 85
3 com.apple.HIToolbox 0x06bebe5f CTextensionIOSuite::FreeSuiteObjects(unsigned long) + 41
4 com.apple.HIToolbox 0x06bebe2e CTextensionIOSuite::FreeSuiteObjects() + 48
5 com.apple.HIToolbox 0x06bf98ef CTextensionIOSuite::Free() + 25
6 com.apple.HIToolbox 0x06bb5bf7 CTextensionEditCommand::Free() + 25
7 com.apple.HIToolbox 0x06bb4f10 OpaqueTXNObject::BuildListCommands(CTextensionEditCommand*) + 248
8 com.apple.HIToolbox 0x06bb4c8f OpaqueTXNObject::NewCommand(short, AttrObjModifier const*, TKeyDownParams*, TReplaceParams*) + 979
9 com.apple.HIToolbox 0x06bb4271 TXNSetTypeAttributes + 457
10 com.adobe.CameraRaw 0x355a15e0 EntryFM + 1920434
11 com.adobe.CameraRaw 0x355a3370 EntryFM + 1928002
12 com.adobe.CameraRaw 0x3556d4a2 EntryFM + 1707124
13 com.adobe.CameraRaw 0x3556d193 EntryFM + 1706341
14 com.adobe.CameraRaw 0x3556f7ec EntryFM + 1716158
15 com.adobe.CameraRaw 0x355ff902 EntryFM + 2306260
16 com.adobe.CameraRaw 0x3538a631 0x351a5000 + 1988145
17 com.adobe.CameraRaw 0x35392a84 0x351a5000 + 2022020
18 com.adobe.CameraRaw 0x353edc91 EntryFM + 136291
19 com.adobe.CameraRaw 0x353c6650 0x351a5000 + 2233936
20 com.adobe.CameraRaw 0x35588620 EntryFM + 1818098
21 com.adobe.CameraRaw 0x3558b06e EntryFM + 1828928
22 com.adobe.CameraRaw 0x353ecdfc EntryFM + 132558
23 com.adobe.CameraRaw 0x35527ab1 EntryFM + 1421955
24 com.adobe.CameraRaw 0x35527ad6 EntryFM + 1421992
25 com.adobe.CameraRaw 0x35527ad6 EntryFM + 1421992
26 com.adobe.CameraRaw 0x35527ad6 EntryFM + 1421992
27 com.adobe.CameraRaw 0x35527ad6 EntryFM + 1421992
28 com.adobe.CameraRaw 0x35527ad6 EntryFM + 1421992
29 com.adobe.CameraRaw 0x35527ad6 EntryFM + 1421992
30 com.adobe.CameraRaw 0x35527ad6 EntryFM + 1421992
31 com.adobe.CameraRaw 0x35527ad6 EntryFM + 1421992
32 com.adobe.CameraRaw 0x35527ad6 EntryFM + 1421992
33 com.adobe.CameraRaw 0x35527ad6 EntryFM + 1421992
34 com.adobe.CameraRaw 0x35527ad6 EntryFM + 1421992
35 com.adobe.CameraRaw 0x35527ad6 EntryFM + 1421992
36 com.adobe.CameraRaw 0x355a12c5 EntryFM + 1919639
37 com.adobe.CameraRaw 0x3559fadb EntryFM + 1913517
38 com.apple.HIToolbox 0x06af9143 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1181
39 com.apple.HIToolbox 0x06af857d SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 405
40 com.a

Thread 13:
0 libSystem.B.dylib 0x068d93ae __semwait_signal + 10
1 libSystem.B.dylib 0x06903d0d pthread_cond_wait$UNIX2003 + 73
2 ...ple.CoreServices.CarbonCore 0x072a4ef7 TSWaitOnCondition + 126
3 ...ple.CoreServices.CarbonCore 0x07283e36 TSWaitOnConditionTimedRelative + 202
4 ...ple.CoreServices.CarbonCore 0x072a4b74 MPWaitOnQueue + 208
5 AdobeACE 0x047a438d 0x4773000 + 201613
6 AdobeACE 0x047a3d85 0x4773000 + 200069
7 ...ple.CoreServices.CarbonCore 0x072a310b PrivateMPEntryPoint + 56
8 libSystem.B.dylib 0x06903095 _pthread_start + 321
9 libSystem.B.dylib 0x06902f52 thread_start + 34
Thread 14:
0 libSystem.B.dylib 0x068d93ae __semwait_signal + 10
1 libSystem.B.dylib 0x06903d0d pthread_cond_wait$UNIX2003 + 73
2 ...ple.CoreServices.CarbonCore 0x072a4ef7 TSWaitOnCondition + 126
3 ...ple.CoreServices.CarbonCore 0x07283e36 TSWaitOnConditionTimedRelative + 202
4 ...ple.CoreServices.CarbonCore 0x072a4b74 MPWaitOnQueue + 208
5 AdobeACE 0x047a438d 0x4773000 + 201613
6 AdobeACE 0x047a3d85 0x4773000 + 200069
7 ...ple.CoreServices.CarbonCore 0x072a310b PrivateMPEntryPoint + 56
8 libSystem.B.dylib 0x06903095 _pthread_start + 321
9 libSystem.B.dylib 0x06902f52 thread_start + 34
Thread 15:
0 libSystem.B.dylib 0x068d93ae __semwait_signal + 10
1 libSystem.B.dylib 0x06903d0d pthread_cond_wait$UNIX2003 + 73
2 ...ple.CoreServices.CarbonCore 0x072a4ef7 TSWaitOnCondition + 126
3 ...ple.CoreServices.CarbonCore 0x07283e36 TSWaitOnConditionTimedRelative + 202
4 ...ple.CoreServices.CarbonCore 0x072a4b74 MPWaitOnQueue + 208
5 AdobeACE 0x047a438d 0x4773000 + 201613
6 AdobeACE 0x047a3d85 0x4773000 + 200069
7 ...ple.CoreServices.CarbonCore 0x072a310b PrivateMPEntryPoint + 56
8 libSystem.B.dylib 0x06903095 _pthread_start + 321
9 libSystem.B.dylib 0x06902f52 thread_start + 34
Thread 16:
0 libSystem.B.dylib 0x068d93ae __semwait_signal + 10
1 libSystem.B.dylib 0x06903d0d pthread_cond_wait$UNIX2003 + 73
2 ...ple.CoreServices.CarbonCore 0x072a4ef7 TSWaitOnCondition + 126
3 ...ple.CoreServices.CarbonCore 0x07283e36 TSWaitOnConditionTimedRelative + 202
4 ...ple.CoreServices.CarbonCore 0x072a4b74 MPWaitOnQueue + 208
5 AdobeACE 0x047a438d 0x4773000 + 201613
6 AdobeACE 0x047a3d85 0x4773000 + 200069
7 ...ple.CoreServices.CarbonCore 0x072a310b PrivateMPEntryPoint + 56
8 libSystem.B.dylib 0x06903095 _pthread_start + 321
9 libSystem.B.dylib 0x06902f52 thread_start + 34
Thread 17:
0 libSystem.B.dylib 0x068d93ae __semwait_signal + 10
1 libSystem.B.dylib 0x06903d0d pthread_cond_wait$UNIX2003 + 73
2 ...ple.CoreServices.CarbonCore 0x072a4ef7 TSWaitOnCondition + 126
3 ...ple.CoreServices.CarbonCore 0x07283e36 TSWaitOnConditionTimedRelative + 202
4 ...ple.CoreServices.CarbonCore 0x072a4b74 MPWaitOnQueue + 208
5 AdobeACE 0x047a438d 0x4773000 + 201613
6 AdobeACE 0x047a3d85 0x4773000 + 200069
7 ...ple.CoreServices.CarbonCore 0x072a310b PrivateMPEntryPoint + 56
8 libSystem.B.dylib 0x06903095 _pthread_start + 321
9 libSystem.B.dylib 0x06902f52 thread_start + 34
Thread 18:
0 libSystem.B.dylib 0x068d22e6 mach_wait_until + 10
1 libSystem.B.dylib 0x069493ad nanosleep + 314
2 com.adobe.PSAutomate 0x30e63755 ScObjects::Thread::sleep(unsigned int) + 143
3 com.adobe.PSAutomate 0x30e637b5 ScObjects::Thread::wait(unsigned int) + 23
4 com.adobe.PSAutomate 0x30e54502 ScObjects::BridgeTalkThread::run() + 332
5 com.adobe.PSAutomate 0x30e63a77 ScObjects::Thread::go(void*) + 239
6 libSystem.B.dylib 0x06903095 _pthread_start + 321
7 libSystem.B.dylib 0x06902f52 thread_start + 34
Thread 19:
0 libSystem.B.dylib 0x069216f2 select$DARWIN_EXTSN + 10
1 libSystem.B.dylib 0x06903095 _pthread_start + 321
2 libSystem.B.dylib 0x06902f52 thread_start + 34
Thread 20:
0 libSystem.B.dylib 0x068d93ae __semwait_signal + 10
1 libSystem.B.dylib 0x06903d0d pthread_cond_wait$UNIX2003 + 73
2 ...ple.CoreServices.CarbonCore 0x072a4ef7 TSWaitOnCondition + 126
3 ...ple.CoreServices.CarbonCore 0x07283e36 TSWaitOnConditionTimedRelative + 202
4 ...ple.CoreServices.CarbonCore 0x072a4b74 MPWaitOnQueue + 208
5 com.adobe.CameraRaw 0x3535875d 0x351a5000 + 1783645
6 com.adobe.CameraRaw 0x35358123 0x351a5000 + 1782051
7 ...ple.CoreServices.CarbonCore 0x072a310b PrivateMPEntryPoint + 56
8 libSystem.B.dylib 0x06903095 _pthread_start + 321
9 libSystem.B.dylib 0x06902f52 thread_start + 34
Thread 21:
0 libSystem.B.dylib 0x068d93ae __semwait_signal + 10
1 libSystem.B.dylib 0x06903d0d pthread_cond_wait$UNIX2003 + 73
2 ...ple.CoreServices.CarbonCore 0x072a4ef7 TSWaitOnCondition + 126
3 ...ple.CoreServices.CarbonCore 0x07283e36 TSWaitOnConditionTimedRelative + 202
4 ...ple.CoreServices.CarbonCore 0x072a4b74 MPWaitOnQueue + 208
5 com.adobe.CameraRaw 0x3535875d 0x351a5000 + 1783645
6 com.adobe.CameraRaw 0x35358123 0x351a5000 + 1782051
7 ...ple.CoreServices.CarbonCore 0x072a310b PrivateMPEntryPoint + 56
8 libSystem.B.dylib 0x06903095 _pthread_start + 321
9 libSystem.B.dylib 0x06902f52 thread_start + 34
Thread 22:
0 libSystem.B.dylib 0x068d93ae __semwait_signal + 10
1 libSystem.B.dylib 0x06903d0d pthread_cond_wait$UNIX2003 + 73
2 ...ple.CoreServices.CarbonCore 0x072a4ef7 TSWaitOnCondition + 126
3 ...ple.CoreServices.CarbonCore 0x07283e36 TSWaitOnConditionTimedRelative + 202
4 ...ple.CoreServices.CarbonCore 0x072a4b74 MPWaitOnQueue + 208
5 com.adobe.CameraRaw 0x3535875d 0x351a5000 + 1783645
6 com.adobe.CameraRaw 0x35358123 0x351a5000 + 1782051
7 ...ple.CoreServices.CarbonCore 0x072a310b PrivateMPEntryPoint + 56
8 libSystem.B.dylib 0x06903095 _pthread_start + 321
9 libSystem.B.dylib 0x06902f52 thread_start + 34
Thread 23:
0 libSystem.B.dylib 0x068d93ae __semwait_signal + 10
1 libSystem.B.dylib 0x06903d0d pthread_cond_wait$UNIX2003 + 73
2 ...ple.CoreServices.CarbonCore 0x072a4ef7 TSWaitOnCondition + 126
3 ...ple.CoreServices.CarbonCore 0x07283e36 TSWaitOnConditionTimedRelative + 202
4 ...ple.CoreServices.CarbonCore 0x072a4b74 MPWaitOnQueue + 208
5 com.adobe.CameraRaw 0x3535875d 0x351a5000 + 1783645
6 com.adobe.CameraRaw 0x35358123 0x351a5000 + 1782051
7 ...ple.CoreServices.CarbonCore 0x072a310b PrivateMPEntryPoint + 56
8 libSystem.B.dylib 0x06903095 _pthread_start + 321
9 libSystem.B.dylib 0x06902f52 thread_start + 34
Thread 24:
0 libSystem.B.dylib 0x068d93ae __semwait_signal + 10
1 libSystem.B.dylib 0x06903d0d pthread_cond_wait$UNIX2003 + 73
2 ...ple.CoreServices.CarbonCore 0x072a4ef7 TSWaitOnCondition + 126
3 ...ple.CoreServices.CarbonCore 0x07283e36 TSWaitOnConditionTimedRelative + 202
4 ...ple.CoreServices.CarbonCore 0x072a4b74 MPWaitOnQueue + 208
5 com.adobe.CameraRaw 0x3535875d 0x351a5000 + 1783645
6 com.adobe.CameraRaw 0x35358123 0x351a5000 + 1782051
7 ...ple.CoreServices.CarbonCore 0x072a310b PrivateMPEntryPoint + 56
8 libSystem.B.dylib 0x06903095 _pthread_s

Need big time help

I am leaving pc and getting imac 20" with windows. How do I install software that works with pc and is it easy to access and use? Will my existing printer work with this setup? Just give me an overview how this works. I really need help in layman's terms. Thanks

"I am leaving pc and getting imac 20" with windows. "
Macs don't come with Windows. You can install it separately using Apple's Boot Camp software. Is this your intention? Please clarify.

Thanks everybody (Need big time help !!!)

Hi there.
First of all.
Thank you for all your help about my OC situation
Really glad this place excisted and all of you guys where friendly and so helpful.
Today i got my 8800GTS + Cellshock ram back from RMA
Fixed everything and fired the thing up.
Now i'm back in buisness again accept for my MSI P965 Platinum MOBO still in RMA.
Lets see what they say ? I got a email today where they was telling me that 2 pins
on the LGA775 slot was bended. Huh? Weird
I never touch those pins and i'm always very carefully about hardware. lol (Accept when OC)
But ok. We will see what they say in the end.
Again everybody. Big thx from MuggeGHQ

Hehe. no. Will try to keep my fingers away from the lovely bios.
Its hard not to. Ofcause you always want to see how high you can work you way op.
Now i have locked my PCIE (100Mhz) and my PCI (33,33Mhz) so they cant go any higher !
Running a mild OC then. 320FSB 3.2ghz for now with my P5B, i want go any higher with this MOBO.
DDR2 800 4-4-4-12 4:5 (800Mhz)
Maybe when i get a P35 MOBO we can play again.
Then i'll be back for help

Need big time help !!!! (THANKS)

Just came home from work. Tryed a creazy OC like 360FSB but the computer woulden boot.
After that nothing happen. So i closed the comp down tought out the PSU and pressed the on botton to clear the last power in it.
Then i first cleared cmos (BIOS) but it still woulden boot. Then i tough out the battery and waited 1 min. now when i try
to turn it on. It just click with a short light.
Nothing happen. It just turns on for very very short time and then down again. Keeps doing that all the time. :( up/down up/down
What to do.
E6700 P965 Platinum with bios 1.51b

This is creazy stuff.
Went out and bought a fairly cheap Asus P5B MOBO and a new E6600 CPU because one of my friends should have this anyway.
So i bought it for him so i could try use it.
The new issue.
After all the stuff with my P965 Platinum and all.
I first tryed the MOBO with my old E6700 CPU. 1 long beep 3 short beep.
Ok. new E6600 CPU on P5B MOBO. Same thing.
Alright. no more here. Tryed both the new MOBO and the new E6600 together with all my other hardware.
Same thing. 1 long beep 3 short ones :(
In the Asus manual it says. 1 long beep with 3 short one is (VGA not detected) JESUS
Now this is not fun anymore. How can it be the 8800 ?????????
One thing there crossed my mind was. Maybe it is my RAM that got after my big OC.
Since non of the new hardware (MOBO & CPU) works with my old hardware, there is only ram, gpu and psu left.
Its not the psu i'm sure. The computer starts and all fan is running included the GPU fan.
Last thing i cant see or control is the RAM.
Could that really be the problem ONLY. That only my ram was smoked in the OC.
So both my E6700 and MSI Platinum MOBO is maybe working alright, but the ram died. Could it really ?

MOVED: Need big time help !!!!

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=108463.0

"I am leaving pc and getting imac 20" with windows. "
Macs don't come with Windows. You can install it separately using Apple's Boot Camp software. Is this your intention? Please clarify.

Help needed in Time Capsule configuration

Hello everybody,
sorry in advance for the probably dummy questions, but I have just bought a Time Capsule and would like some advice in order to obtain the best possible configuration for my needs (the configuration guide was not so clear to me).
I linked the TC via Ethernet to my modem/router (I have a Vodafone Station 2), and I have the following requirements:
1) let the TC become the primary WiFi source: what is the best way to do it? Shall I deactivate the Wi-Fi on the Vodafone Station? Shall I create a new network or extend the existing one?
2) create a guest network (possibly with another password): I can I do it? I didn't succeed in doing it...
3) I would like to use the TC internal hard disk both as a sort of reporitory for my MacBook Air backup, and at the same time as an external hard disk; can I do it directly or should I create a partition on the disk?
4) I would like to add another external HD via USB to the TC, in order to have access to its content through various devices (MacBook, iPhone, iPad, PC) linked to the WiFi network. Also in this case I couldn't get it... How should I do that?
5) Finally, I have a question: is it possible to remotely access (e.g. via 3G) the TC hard disk?
Thank you in advance for any help you can give me!!
Regards

dottorslump wrote:
Hello everybody,
sorry in advance for the probably dummy questions, but I have just bought a Time Capsule and would like some advice in order to obtain the best possible configuration for my needs (the configuration guide was not so clear to me).
I linked the TC via Ethernet to my modem/router (I have a Vodafone Station 2), and I have the following requirements:
1) let the TC become the primary WiFi source: what is the best way to do it? Shall I deactivate the Wi-Fi on the Vodafone Station? Shall I create a new network or extend the existing one?
You do not want to extend.. well actually you cannot extend a non-apple router.. so put that out.
The TC will probably have to be in bridge mode.. but it can become the primary wifi source.. simply create a wireless network. Turn off wireless in the vodafone station.
But from your other requirement of a guest network.. you cannot do that in bridge on the TC.. so why not use the vodafone station as your guest network. Give TC wireless a different name. Fix the channels. Try to have them sit a bit apart from one another.. A few Meters at least.
2) create a guest network (possibly with another password): I can I do it? I didn't succeed in doing it...
You cannot do guest network with the TC in bridge. So you need to either bridge the modem and use pppoe client in the TC.. that depends on if your ISP supports PPPoE authentication.
3) I would like to use the TC internal hard disk both as a sort of reporitory for my MacBook Air backup, and at the same time as an external hard disk; can I do it directly or should I create a partition on the disk?
This is not really a good idea.. You cannot partition a TC.. Mixing data and backups can be done but it is not necessarily going to work well. The primary design of the TC is a backup target for TM and mainly looking at laptops.
Look at Q3 here. http://pondini.org/TM/Time_Capsule.html
Pondini is our guru on all things TM.
Particularly remember any files offloaded to the TC have no backups.. And TC is not reliable enough to trust. It is a single hard disk and has no form of automated backup.. nor can TM backup a network drive. Any backup of info on the TC has to be done manually.
4) I would like to add another external HD via USB to the TC, in order to have access to its content through various devices (MacBook, iPhone, iPad, PC) linked to the WiFi network. Also in this case I couldn't get it... How should I do that?
The USB port of the TC is renowned for being underpowered even if the hard drive is powered you might need a powered hub. Some hubs work and some don't so even that is not simple.
USB drive has to be formatted Mac Extended Journelled. Or fat32.
5) Finally, I have a question: is it possible to remotely access (e.g. via 3G) the TC hard disk?
In your case the answer is probably.. but this will not be easy.
Apple's only method is BTMM via iCloud, but the TC must be the main router in the network.
That means you need to bridge your existing modem.
You might be able to get it to work via the existing modem. Please google remote access time capsule.
You will need to port forward AFP to the TC in the modem and use ddns to find the correct address unless your ISP has given you a static IP.
Sorry for the glass half empty answer.

Help needed for Time Calc Java Script

Hi,
I am trying to create a timesheet in PDF and have hit a speed bump. Is there anyone there who could provide me with a script that calculated the difference between 2 times? (Field2 time)-(Feild 1 Time) = Duration.I am desperate and have tried everything.
I proccess the payroll for a company and all of the 500 or so timesheets that I received each fortnight are paper copies and I am pulling my hair out. I need to use Adobe forms (We have Adobe Pro 9 and I am using the XML forms, not live cycle) as the serach engine that we use for emails cannot search on excel documents.
I have no Java script experience and I am getting completely lost in the subject. Any help would be greatly appreciated.
Thanks anyone who can help at all.
-Sohnia

hi friend here example for time calulation start and end time example.. just copy and paste then run it ur browser. <HTML> <script language="JavaScript">  </script> </HEAD> <BODY BGCOLOR=FFFFFF TEXT=000000 LINK=0000FF VLINK=800080> <div align="center"><table width="950" border="0" cellpadding="0" bgcolor="#899194" cellspacing="0"> <tr><td valign="middle" width="33%"> <center> <form> <TD WIDTH=80%> <center> <TABLE ALIGN=MIDDLE BORDER=5 CELLPADDING=5> <TR BGCOLOR=#FFFFFF>  <TD WIDTH=80%> <center> <TABLE ALIGN=MIDDLE BORDER=5 CELLPADDING=5> <TR BGCOLOR="#B6D4D2">  <td colspan=4> <center>Time Between Times Calculations - Multiple Days</center> </td> </tr> <TR BGCOLOR="#B6D4D2"> <TD align="center" colspan=4> Required Data Entry </td> </tr> <tr> <td align="center">Start / End</td> <td align="center">Hour</td> <td align="center">Minute</td> <td align="center">AM / PM</td> </tr> <td align="center">Start time</td> <td align="center"><input type="text" name="hour1" size="5"></td> <td align="center"><input type="text" name="minute1" size="5"></td> <td align="center"><select name="period1"> <option value="1">AM <option value="2">PM </select> </td> </tr> <tr> <td colspan="3"> Add Complete Interim Days</td><td align="center"><input type="text" name="adays" size="5" value="0"></td> </tr> <tr> <td align="center">Start / End</td> <td align="center">Hour</td> <td align="center">Minute</td> <td align="center">AM / PM</td> </tr> <td align="center">End time</td> <td align="center"><input type="text" name="hour2" size="5"></td> <td align="center"><input type="text" name="minute2" size="5"></td> <td align="center"><select name="period2"> <option value="1">AM <option value="2">PM </select> </td> </tr> <tr> <td align="center" colspan=4 BGCOLOR="#B6D4D2"> <input type="button" value="Calculate" onclick="h1=form.hour1.value; h2=form.hour2.value; m1=form.minute1.value; m2=form.minute2.value; days=form.adays.value; am1=form.period1.options[period1.selectedIndex].value; am2=form.period2.options[period2.selectedIndex].value; if(h1 < 0 | h1 > 12) alert('Your start hour is not valid'); else if(h2 < 0 | h2 > 12) alert('Your end hour is not valid'); else if(m1 < 0 | m1 > 59) alert('Your start minute is not valid'); else if(m2 < 0 | m2 > 59) alert('Your end minute is not valid'); else form.answer.value=findtime(h1,h2,days,m1,m2,am1,am2);"> <input type="reset" value="Clear Values"> </td> </tr> <TR BGCOLOR="#B6D4D2"> <TD align="center" colspan=4> Calculated Results </td> </tr> <tr> <td align="center" colspan="4"> Time Difference <input type="text" name="answer" size="40"> <tr><td>[email protected]</td></tr> </td> </tr> </table> </form> </td> </tr> </table> </center> </td> </tr> </table> </center> </TD> </TR> </TABLE> </BODY> </HTML>

Help needed with Time Machine multiple drives set up

Hello, I need help in finding out if what I want to do is possible.
I upgraded to Mountain Lion today as I understood it can handle multiple back up drives. I see how to add a 2nd back up drive, however I do not see a way to put different folders onto different drives.
iMac - backed to a 3TB DRIVE A via the time machine
iPhoto Library original file - already on the 3TB DRIVE A - so no back up for now!
What I'd like to do is to also back up only the iPhotoLibrary file to a 2nd drive - lets call it 3TB DRIVE B
Can it be done with Mountain Lion or not really? I don't even seem to be able to exclude files from an External Disk actually.
Any other software I could use that would do the trick?
Or do I have to rearrange our already messy set up? I've put the iPhoto Library on the DRIVE A as its a faster drive. but I guess the solution would be to put the iPhoto Library original file onto the slower Drive B and only keep the iPhoto file on it?
Hmm any help or tips greatly appreciated.
Thank you in advance.
Marta

Sharlo wrote:
So here's my question: After reinstalling system TM started normal back-up procedure and I get message not enough space on external disk. I use 200Gb for around 100Gb that I have on my computer (I know not so much but works well for me). What I do not get is why does TM need around 30% more space compared to the space I'm using (wants to back-up 130Gb) and why is it not backing-up the system I've just installed but tries to back-up everything from scratch? Is there a procedure to back-up only changed files since the last version?
Ordinarily, that's exactly what TM does. But this situation isn't ordinary. Everything you restored is considered "*new to that disk"* and will be backed-up again. See #14 in the Frequently Asked Questions *User Tip* at the top of this forum, and http://support.apple.com/kb/TS1338
The 30% you ask about is actually 20%; the initial estimate of the space needed might be low, and TM needs workspace on the TM disk, so it adds 20% (see #7 in the FAQ Tip.)

Help needed with time capsule

I have a 3tb Time capsule and Mac set up with Virgin Hub
Back ups work fine but most times i try to acces anything on the time capsule it comes up with not available
It works if i restart or boot through airport utilty
I have the data file with a music sub folder and have a 1 drive plugged to usb both of which seem to be a little to illusive
can you help
Thanks
n

This is a bug on Lion and 7.6 firmware and greater on the TC..
There is no fix.. Ring applecare and ask why it does that.
I suspect Apple will have no idea. Although we have plenty of posts here with the same issue.
I can suggest a bunch of stuff.. nothing from what I gather is a cure.. but it might help.. perhaps this will be auto fixed in ML.
I stick with SL as it has decent networking btw.. and no issues.. !! If you are still on SL you should not have issues if you go back to 7.5.2 firmware on the TC.
First off, tell us a bit more.
Is the TC part of the network, bridged or router or setup independently of the network. Not sure what the virgin hub is.. but please describe the network a bit more.
Try going back to 7.5.2 firmware. Apparently can be very difficult for the most recent versions of TC but if you run lion you should also try it.. download the 5.6 airport utility if not already using that, and try to go back to earlier firmware.
Other things..
Reset the TC and use short no spaces names for TC and wireless. Pure alphanumeric.. no special characters. Is the TC main router.. ?? set the dhcp server to short lease time. Like 10min.. if the virgin hub is the router do the same in that.
Are you connecting by wireless.. ?? Lock the wireless channels and use different name for 5ghz from 2.4ghz to prevent wireless clients jumping around.
When you lose the TC next time.. open terminal and ping it.. by name and ip address.. tell me what happens.

Help needed with timer codes

i have tried to do a countdown timer but can't debug it.. can anyone help me with it or can anyone provide me with the correct coding for countdown timer..
import java.awt.*;
import java.Swing.*;
import java.util.*;
import java.awt.*;
import java.Swing.*;
import java.util.*;
public class timer
 public static void main (String [] args)
 double sec = 150;
 countDown(sec);
 private Thread countDown(double seconds)
 final double time = seconds;
 Runnable runnable(){
 public void run(){
 try{
 Thread.sleep(time * 1000);
 }catch(Exception e){}
 return new Thread(runnable);
 public void displayCountDown(){
 int seconds = 22;
 for(int i = 0; i < seconds; i++){
 Thread trd = countDown(i);
 trd.start(){
 while(trd.isAlive()){
 ; // wait
 System.out.print('\r');
 System.out.print(i);
}

I would suggest using javax.swing.Timer or java.util.Timer instead of implementing it yourself.

Help needed with Time Machine

I've installed Boot Camp because I wanted to play an old game. I understood eventually that laptops are not made for that purpose (my one year old MBP was heating too often and I didn't like that). Unfortunately even during that period I've started experiencing some oddness when switching to Snow Leopard 10.6.2. Eventually I've decided to uninstall Windows and after three hours playing with Snow Leopard in order to make it as it was before I understood I'm not qualified enough to mess with plists and I do not know what else, so brut force solution - reinstalling entire system from the Time Machine.
Everything now works very fast, very nice, I've saved time doing that (soooo happy TM saved my life ... again).
So here's my question: After reinstalling system TM started normal back-up procedure and I get message not enough space on external disk. I use 200Gb for around 100Gb that I have on my computer (I know not so much but works well for me). What I do not get is why does TM need around 30% more space compared to the space I'm using (wants to back-up 130Gb) and why is it not backing-up the system I've just installed but tries to back-up everything from scratch? Is there a procedure to back-up only changed files since the last version?
What I'm doing know is just saving old back-up on a second external drive (just in case if something goes wrong) and I'll "clean" my primary TM disk and then install again ... of course if somebody knows how to force TM to back-up only the files that changed ...
Thanks in advance and cheers,
Sharlo

Sharlo wrote:
So here's my question: After reinstalling system TM started normal back-up procedure and I get message not enough space on external disk. I use 200Gb for around 100Gb that I have on my computer (I know not so much but works well for me). What I do not get is why does TM need around 30% more space compared to the space I'm using (wants to back-up 130Gb) and why is it not backing-up the system I've just installed but tries to back-up everything from scratch? Is there a procedure to back-up only changed files since the last version?
Ordinarily, that's exactly what TM does. But this situation isn't ordinary. Everything you restored is considered "*new to that disk"* and will be backed-up again. See #14 in the Frequently Asked Questions *User Tip* at the top of this forum, and http://support.apple.com/kb/TS1338
The 30% you ask about is actually 20%; the initial estimate of the space needed might be low, and TM needs workspace on the TM disk, so it adds 20% (see #7 in the FAQ Tip.)

Help Needed - Big Boss Visting Today

Okay so here in Canada on the Bell network we got the 10.2.1.537 update last week. Now our boss from outside of Canada is visiting and my direct local boss told him about the great features and now he wants the update even though it was not released to his carrier/country yet.   They called me in to the office and my boss had his sim card in the out of country blackberry to try to trick the system into thinking it was a legit phone for the update.    First problem is will this even be possible to trick the system some way and second is will it break the phone for this user if they get an update that their carrier has not released yet.     Any people out there with any ideas? I could really use the brownie points around here.

CSisk, was the big bosses devices able to upgrade?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Help needed big time

Similar Messages

Maybe you are looking for