Help needed for a 2662 MPU x24 thinkpad
Can anyone tell me where I can get a restore disc for this machine or an ISO copy.
IBM Thinkpad 2662 MPU X24
The FRU is 32P7193
Any help would be appreciated.
Thank you and God Bless you all.
Frank
you could also try your luck at ebay or marketplace on forum.thinkpads.com.
The worst that can happen, is you using an aftermarket XP pro discs and download the drivers from Lenovo.com.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft
Similar Messages
-
help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2 02 Computer Science
3 03 Physics
4 04 Chemistry
5 05 Mathematics
7 07 Commerce
8 08 Computer Applications
9 09 Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383 S1 9 4 2 3
384 S2 4 2 5 3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383 S1
384 S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1 383 9
2 383 4
3 383 2
4 383 3
5 384 4
6 384 2
7 384 5
8 384 3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2 SUBJECT3 SUBJECT4
383 S1 Biology Chemistry Computer Science Physics
384 S2 Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID subjects
383 Biology,Chemistry,Computer Science,Physics
384 Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --PradeeshWell I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say. -
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help............... -
File missing (file\BCD error code 0Xc0000034 help need for work!
file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pcHi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Help need for force to signout All session ! how...
hi
help need for force to signout All session ! how ??
Solved!
Go to Solution.Hi and welcome to the Skype Community,
To force a signout of all instances your Skype is signed into please change your password: https://support.skype.com/en/faq/FA95/how-do-i-change-my-password
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓ -
Help Needed for T42 Start-up Problem
Urgent help need!!!
I have a ThinkPad T42 with Windows XP installed. It works perfectly for a while without ever have any problem or error message. Then suddenly it won’t work anymore. The symptom is following:
After power on the laptop the Microsoft window would show up and it prompt me for window logon password. After I type in the password it then shows “window is loading your personal setting”. After a long while nothing would show up on the screen other than the background of the normal screen. There is no window bar at the bottom or any icon on the screen. If I start in safe mode then everything would show up. I don’t know what is going on.
This happened two months ago and I ended up restoring a backup image to get it work again. It happens again today with the same symptom. I am really tired of having to restore image backup every 2 months.
I would really appreciate it if any of your experts can offer me some insight into this problem. I am desperate in need of help.
Thanks very much!wangy26, welcome to the forum,
Have a look at this thread to see if my post there helps. The problem seems to mostly occur at the start of a month, why I don't know. Unfortunately the member didin't report back whether or not this was a viable solution for them.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Query help needed for querybuilder to use with lcm cli
Hi,
I had set up several queries to run with the lcm cli in order to back up personal folders, inboxes, etc. to lcmbiar files to use as backups. I have seen a few posts that are similar, but I have a specific question/concern.
I just recently had to reference one of these back ups only to find it was incomplete. Does the query used by the lcm cli also only pull the first 1000 rows? Is there a way to change this limit somwhere?
Also, since when importing this lcmbiar file for something 'generic' like 'all personal folders', pulls in WAY too much stuff, is there a better way to limit this? I am open to suggestions, but it would almost be better if I could create individual lcmbiar output files on a per user basis. This way, when/if I need to restore someone's personal folder contents, for example, I could find them by username and import just that lcmbiar file, as opposed to all 3000 of our users. I am not quite sure how to accomplish this...
Currently, with my limited windows scripting knowledge, I have set up a bat script to run each morning, that creates a 'runtime' properties file from a template, such that the lcmbiar file gets named uniquely for that day and its content. Then I call the lcm_cli using the proper command. The query within the properties file is currently very straightforward - select * from CI_INFOOBJECTS WHERE SI_ANCESTOR = 18.
To do what I want to do...
1) I'd first need a current list of usernames in a text file, that could be read (?) in and parsed to single out each user (remember we are talking about 3000) - not sure the best way to get this.
2) Then instead of just updating the the lcmbiar file name with a unique name as I do currently, I would also update the query (which would be different altogether): SELECT * from CI_INFOOBJECTS where SI_OWNER = '<username>' AND SI_ANCESTOR = 18.
In theory, that would grab everything owned by that user in their personal folder - right? and write it to its own lcmbiar file to a location I specify.
I just think chunking something like this is more effective and BO has no built in back up capability that already does this. We are on BO 4.0 SP7 right now, move to 4.1 SP4 over the summer.
Any thoughts on this would be much appreciated.
thanks,
MissyJust wanted to pass along that SAP Support pointed me to KBA 1969259 which had some good example queries in it (they were helping me with a concern I had over the lcmbiar file output, not with query design). I was able to tweak one of the sample queries in this KBA to give me more of what I was after...
SELECT TOP 10000 static, relationships, SI_PARENT_FOLDER_CUID, SI_OWNER, SI_PATH FROM CI_INFOOBJECTS,CI_APPOBJECTS,CI_SYSTEMOBJECTS WHERE (DESCENDENTS ("si_name='Folder Hierarchy'","si_name='<username>'"))
This exports inboxes, personal folders, categories, and roles, which is more than I was after, but still necessary to back up.. so in a way, it is actually better because I have one lcmbiar file per user - contains all their 'personal' objects.
So between narrowing down my set of users to only those who actually have saved things to their personal folder and now having a query that actually returns what I expect it to return, along with the help below for a job to clean up these excessive amounts of promotion jobs I am now creating... I am all set!
Hopefully this can help someone else too!
Thanks,
missy -
Help needed for using BASIC authentication through JDBCRealm
Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
<Realm
className="org.apache.catalina.realm.JDBCRealm"
driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
connectionName="username" connectionPassword="password"
digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
userRoleTable="user_roles" roleNameCol="rolename"
/>
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
---------------------------------------------------------------- -
W530 SSD and Memory help needed for high performanc​e systems.
Hi Guys,
After dealing with lots of laptops that got destroyed by daily use, our organizations is considering ordering 25 Thinkpad W530 laptops from Lenovo and we hope that they last a little longer.
Our main usage is video editing and design so we have chosen the best that Lenovo has to offer as far as hardware.
Since Lenovo charges arm and a leg for SSD and 16GB memories, we have decided to purchase these separately and upgrade ourselves.
Knowing the high need for performance, what would you recommend for 128GB SSD and 16GB memory?
The laptops are all coming with 7200 RPM drives for storage so the SSD is mainly for programs and the OS.
For the drive bay, does this part sound right to you? http://shop.lenovo.com/us/itemdetails/0A65623/460/89555ADB1CE946DA80E0E5D6FE77B164
This would be used for the HDD and the SSD would be moved to main HDD location.
Is there anything else we should know about these laptops?
Thank you in advanced for your time and all suggestions are welcomed.
Cheers,
Chris
Solved!
Go to Solution.I installed 32GB (4x8GB) of Corsair Vengeance RAM, and it has been working wonderfully since day 1.
Thinkpad W530, i7-3720QM, 1920x1080 screen, 32GB RAM, dual SSDs (Samsung 830, Crucial M4 mSATA), Quadro K2000M, 9-cell battery, DVD burner, backlit keyboard, Bluetooth, Intel 6300 wireless card -
Help need for badi method me_process_po_cust~check
Dear All expert
Pl see following thread
I am stuck
Help needed
http://scn.sap.com/thread/3610303See the issue here is HOLD feature in PO should not be there if it meets the error condition.
For this you can refer another BADI for this purpose ME_HOLD_PO.
Refer one of my previous threads below , it might be helpful :
Held Purchase order need not be created.
Reiterating a thread related to same topic is not a good practice. -
XMLAGG structure, performance help needed for odd nesting in schema
Hello,
I have to produce XML to look like:
<?xml version='1.0'?>
<enterprise>
<membership>
<sourcedid>
<id>PHYS_101_001_FA2007</id>
</sourcedid>
<!-- NOTE: absence of "members" level tag for XMLAGG! -->
<member>
<sourcedid>
<id>D2LU0001</id>
</sourcedid>
<role roletype="Sample Role">
<status>1</status>
</role>
</member>
<member>
<sourcedid>
<id>D2LU0002</id>
</sourcedid>
<role roletype="Sample Role">
<status>1</status>
</role>
</member>
</membership>
</enterprise>This would be straightforward if the schema allowed for a "<members>" tag under which to nest the <member> tags. But, it does not allow for that tag or any other than those listed above.
I have a query which does produce that output (except for the roletype attribute), but its performance is horrible; it takes about 40 minutes to return data:
SELECT
XMLROOT(
XMLELEMENT("enterprise",
XMLAGG(
XMLELEMENT("membership",
XMLFOREST( XMLELEMENT("id",cx.mapped_course_id) as "sourcedid"
(SELECT XMLAGG(
XMLELEMENT("member",
XMLFOREST(XMLELEMENT("id",spriden_id) AS "sourcedid",
XMLELEMENT("status",'1') AS "role"
FROM enrollments_fall_sfrstca efs
, spriden sp
, gzv_tuid t
WHERE sp.spriden_change_ind IS NULL
AND sp.spriden_pidm = t.pidm
AND t.tuid = efs.user_name
AND efs.mapped_course_id = cx.mapped_course_id
AND efs.term = cx.semester
, VERSION '1.0', STANDALONE NO VALUE)
FROM courses_xt cx
WHERE cx.semester = :term_code
;Similar queries are producing courses and users XML fine with no performance issues, but these are driven off either the courses view or the enrollments view, but not both.
Is there some other way I can produce the nesting I need for the vendor's schema?
The source views are basically as follows (showing relevant columns only):
courses_xt:
MAPPED_COURSE_ID SEMEST
AVFT209-13307-201210 201210
AVFT210-13308-201210 201210enrollments_fall_sfrstca:
MAPPED_COURSE_ID USER_NAME
AVFT209-13307-201210 FULLERC8
AVFT209-13307-201210 SHUPEK
AVFT209-13307-201210 NOMAN
AVFT210-13308-201210 SHUPEK
AVFT210-13308-201210 PELLONMWhen I have the query without the XML (with the subquery as a column of the outer query), this returns the correct data quickly (a couple of minutes).
I have tried various permutations of XMLFOREST, XMLELEMENT, XMLAGG but either I get syntax errors, or the data is wrong (e.g. repeated '<membership>' for each '<member>', or I have to create an invalid tag '<members>' to be filtered later).
Please advise!
Thanks,
Anita LeesHi Anita,
Have you tried with a GROUP BY and no subquery?
Here's an example using SCOTT schema.
I've used the same tag names and structure so that you can see the analogy :
SELECT XMLElement("enterprise",
XMLAgg(
XMLElement("membership",
XMLElement("sourceid", xmlelement("id", d.deptno))
, XMLAgg(
XMLElement("member",
XMLElement("sourceid",
XMLElement("id", e.empno)
, XMLElement("role",
XMLAttributes(e.job as "roletype")
, XMLElement("status", '1')
FROM scott.dept d
LEFT OUTER JOIN scott.emp e ON e.deptno = d.deptno
WHERE d.deptno IN (10,20)
GROUP BY d.deptno
;which gives :
<enterprise>
<membership>
<sourceid>
<id>10</id>
</sourceid>
<member>
<sourceid>
<id>7782</id>
</sourceid>
<role roletype="MANAGER">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7934</id>
</sourceid>
<role roletype="CLERK">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7839</id>
</sourceid>
<role roletype="PRESIDENT">
<status>1</status>
</role>
</member>
</membership>
<membership>
<sourceid>
<id>20</id>
</sourceid>
<member>
<sourceid>
<id>7369</id>
</sourceid>
<role roletype="CLERK">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7902</id>
</sourceid>
<role roletype="ANALYST">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7566</id>
</sourceid>
<role roletype="MANAGER">
<status>1</status>
</role>
</member>
</membership>
</enterprise> -
Help needed for grouping.
Hi,
Help needed .
I have an internal table having 6 .
Ex :
f1 f2 f3 f4 f5 f6
a aa 11 p1 10 10
a aa 12 p1 20 20
b aa 11 p2 30 30
b aa 12 p2 40 30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1 f2 f3 f4 f5 f6
a aa 11 p1 30 30.
b aa 11 p2 70 60.
can anyone help me.How to do this..?
ThanksHere you go
DATA:
BEGIN OF cur_tab OCCURS 0,
f1 TYPE c,
f2(2) TYPE c,
f3(2) TYPE c,
f4(2) TYPE c,
f5(2) TYPE c,
f6(2) TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
f1 TYPE c,
f4(2) TYPE c,
f5 TYPE p,
f6 TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
f1 TYPE c,
f2(2) TYPE c,
f3(2) TYPE c,
f4(2) TYPE c,
f5(5) TYPE c,
f6(5) TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
MOVE-CORRESPONDING cur_tab TO sum_tab.
COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
f4 = sum_tab-f4.
IF sy-subrc NE 0.
WRITE:/ 'Something went very wrong'.
CONTINUE.
ENDIF.
MOVE-CORRESPONDING cur_tab TO final_tab.
MOVE-CORRESPONDING sum_tab TO final_tab.
APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
WRITE:/1 final_tab-f1,
AT 5 final_tab-f2,
AT 10 final_tab-f3,
AT 15 final_tab-f4,
AT 20 final_tab-f5,
AT 25 final_tab-f6.
ENDLOOP.
and the output
a aa 11 p1 30 30
b aa 11 p2 70 60 -
Hi everyone ☺
I’m finally planning to start recording what I play, and after some hours of wandering on the web I found some interesting possibilities. Now what I need is to decide which one is more suitable for my needs, and here comes the moment for apple discussions
Basically, I will record my own music one track/instrument at a time (I’m still not able to play more than one…and I dont’ want to spend 2.000$ to buy a 24-ins device just to record drum tracks), I’d like to have a software with built-in effects for guitar/bass/voice, integrated soundtrack possibilities (to play with video recordings), mixing options for both stereo and surround mixing, and I don’t want any card to be placed into my mac. Well, and obviously the sound quality must be pro-like…as anyone probably wants.
So, here’s what I came up with:
a) getting logic pro studio 8 and apogee duet
b) getting pro tools m-powered and mbox 2
c) getting one of the two softwares and a Monster iStudioLink Instrument cable and plug instruments directly into the mac
Now, the questions are:
if I can plug an instrument directly into my mac and control all parameters via one of the two softwares, what do tools like duet and mbox2 serve for?
In the case this tools are useful [ ☺ ], why ☺ … and which is the couple software/hardware that can best suit my needs?
I assume that every software has a proprietary file extension in which audio tracks are saved, so that it should be impossible to record an audio track with one software and edit it with another that has different functions/plugins (ex. from logic to pro tools, from pro tools to cakewalk sonar which I have on a pc etc.). Am I right, or is there any “standard”, non compressed high quality file type in which track can be saved and exported to be edited with different softwares?
I know that from this post it may easily seem that I’m a hopeless digital idiot, but I swear the situation is not really that bad so no need for the kind of explanations with drawings like the ones you find in the “for dummies” guides lol so every experts’ advice will be greatly appreciated
NeptuneThank you Bee Jay and Pancenter for the lighting-fast and useful answers
now I am aware that an interface IS NEEDED lol (that means they are not produced without a reasons, are they?). I know Pro Tools is the industry standard but I don't like anyone/anything to tie me to their choices/interests (so that's why I was asking about Pro Tools, knowing that there's some sort of "hardware threat"). What I look for is just quality and if I understood what you both mean, as far as this aspect is concerned, Logic and Pro Tools are substantially comparable...isn't it? On the interfaces side, I already checked the Saffire ones (they seem quite good, and cross-platform use is definitely a plus), I will check the others mentioned and will let you know In fact, I didn't consider the "platform problem" but, as I wrote, I also own a PC with an Audigy 2 soundcard (midi/analog/optical/digital inputs/outputs and firewire port...not Madonna's private studio, but not as sad as Mac's little hole) and Sonar 6 Producer Edition, so that has been a really good point to ponder. And now, in the middle of this software/hardware battle...any personal suggestions based on tests/personal experience? -
Help needed for Report Generator in B1 2005
Hi,
I have upgraded to B1 2005 and I would like to know where I can find Help files for the report generator (used to customize invoices ...). In particular, I would like to know where I can find information about the system functions available e.g. currentpage().
Thanks in advance for your help!
JPUse this link.
<a href="https://websmp102.sap-ag.de/form/sapnet?_FRAME=OBJECT&_HIER_KEY=701100035871000437965&_SCENARIO=01100035870000000183&">https://websmp102.sap-ag.de/form/sapnet?_FRAME=OBJECT&_HIER_KEY=701100035871000437965&_SCENARIO=01100035870000000183&</a>
In Customization section you can find a document based on PLD -
Hi,
i need to add coloums for the existing report which picks from G/L account.
in this report I need to add some more columns from COSP-KSTAR, which shows the cost element details from G/L account.
I need to restrict that cost element number according to the company code.
Plz see this and let me know the things.
1. I need to add FISCAL YEAR(COEP-GJAHR) in selection screen.
2. I need to add column: Employee Cost (CSKS-KOSTL)
3. add a column Staff Welfare (COSP-KSTAR) this is to restrict for the cost element 3000200 from G/L account
4. add a column Recruitment restrict for the cost element(COSP-KSTAR) 3100040 from G/L account
5. add a column Travels (suppressing some cost elements(COSP-KSTAR) and putting into Travels)
6. add a column Subcontracts restrict for the cost element (COSP-KSTAR)3100360 from G/L account
7. add a column Communication suppressing some cost elements and putting into Communication)
8. add a column Rent restrict for the cost element (COSP-KSTAR)3100055 from G/L account
9. add a column Back end Cost restrict for the cost element (COSP-KSTAR)3100065 from G/L account
i can hardcode these cost elements.
i did according to some of our sdn friends guidence but it is going to dump.
hear i am sending the code what i changed.
it is giving the error with the select.
SELECT BUKRS KOKRS gjahr kstar OBJNR OBJNR_N1 PERIO BEKNZ WKGBTR WOGBTR FROM
COEP INTO TABLE
IT_COEP FOR ALL ENTRIES IN IT_AUFK WHERE OBJNR = IT_AUFK-OBJNR and
perio in S_PERIO.
plz try to help me out in this issue.
hear i am sending the complete code what i worte.
*& Report ZPROJECT_PROFIT2
REPORT ZPROJECT_PROFIT2.
*********************MAIN DOCUMENTATION BLOCK*************************
Project Code :
Program Name :Zproject_profit1.
Purpose of program :This report will give the gross margin for a project as
*a whole based on some selected input criteria.
Author of program :JAYA KRISHNA .B.
INPUT/OUTPUT FILE :nil
TYPE-POOLS : SLIS."For ALV display.
TABLES : COEP, "CO Object: Line Items (by period).
AUFK, "Order master data.
csks, "Cost center master data
cosp. "CO Objects
*& Include ZSTRUCTURE
types: BEGIN OF TY_COEP , "structure of table COEP.
BUKRS LIKE COEP-BUKRS,
KOKRS LIKE COEP-KOKRS,
OBJNR LIKE COEP-OBJNR,
gjahr like coep-gjahr,
kstar like coep-kstar,
OBJNR_N1 LIKE COEP-OBJNR_N1,
PERIO LIKE COEP-PERIO,
BEKNZ LIKE COEP-BEKNZ,
WKGBTR LIKE COEP-WKGBTR,
WOGBTR LIKE COEP-WOGBTR,
BELNR LIKE COEP-BELNR,
END OF TY_COEP,
BEGIN OF TY_AUFK , "structure of table AUFK.
BUKRS LIKE AUFK-BUKRS,
KOKRS LIKE AUFK-KOKRS,
OBJNR LIKE AUFK-OBJNR,
KTEXT LIKE AUFK-KTEXT,
ANFAUFNR LIKE AUFK-ANFAUFNR,
AUFEX LIKE AUFK-AUFEX,
USER2 LIKE AUFK-USER2,
USER0 LIKE AUFK-USER0,
USER1 LIKE AUFK-USER1,
USER3 LIKE AUFK-USER3,
USER6 LIKE AUFK-USER6,
USER7 LIKE AUFK-USER7,
USER8 LIKE AUFK-USER8,
ABKRS(10) TYPE C,
USER9 LIKE AUFK-USER9,
AUFNR LIKE AUFK-AUFNR,
END OF TY_AUFK,
begin of ty_csks,
kokrs like csks-kokrs,
kostl like csks-kostl,
bukrs like csks-bukrs,
objnr like csks-objnr,
end of ty_csks.
DATA : BEGIN OF IT_COSP occurs 100,
OBJNR LIKE COSP-OBJNR,
GJAHR LIKE COSP-GJAHR,
KSTAR LIKE COSP-KSTAR,
END OF IT_COSP.
DATA : IT_COEP TYPE TABLE OF TY_COEP, " Declaraton of tables COEP and AUFK.
IT_AUFK TYPE TABLE OF TY_AUFK,
IT_CSKS TYPE TABLE OF TY_CSKS.
IT_COSP TYPE TABLE OF TY_COSP.
DATA : WA_COEP LIKE LINE OF IT_COEP, " Declaration of work areas for tables COEP and AUFK.
WA_AUFK LIKE LINE OF IT_AUFK,
WA_CSKS LIKE LINE OF IT_CSKS.
WA_COSP LIKE LINE OF IT_COSP.
DATA : BEGIN OF IT_DISPLAY OCCURS 0, " Declaration of display table.
OBJNR_N1 LIKE COEP-OBJNR_N1,
OBJNR_N12 LIKE COEP-OBJNR_N1,
KTEXT1 LIKE AUFK-KTEXT,
WKGBTR LIKE COEP-WKGBTR,
WOGBTR LIKE COEP-WOGBTR,
WKGBTR1 LIKE COEP-WTGBTR,
WOGBTR1 LIKE COEP-WOGBTR,
ADDK LIKE COEP-WOGBTR,
ADDO LIKE COEP-WOGBTR,
ADDK1 LIKE COEP-WOGBTR,
ADDO1 LIKE COEP-WOGBTR,
PROFIT1 LIKE COEP-WOGBTR,
PROFIT2 LIKE COEP-WOGBTR,
BEKNZ LIKE COEP-BEKNZ,
BUKRS LIKE AUFK-BUKRS,
anfaufnr LIKE AUFK-anfaufnr,
aufex like aufk-aufex,
OBJNR LIKE AUFK-OBJNR,
USER2 LIKE AUFK-USER2,
USER0 LIKE AUFK-USER0,
USER1 LIKE AUFK-USER1,
USER3 LIKE AUFK-USER3,
USER6 LIKE AUFK-USER6,
USER7 LIKE AUFK-USER7,
USER8 LIKE AUFK-USER8,
ABKRS LIKE AUFK-ABKRS,
USER9 LIKE AUFK-USER9,
PERIO LIKE COEP-PERIO,
AUFNR LIKE AUFK-AUFNR,
STR(5) TYPE C,
WORK(10) TYPE C,
END OF IT_DISPLAY,
: BEGIN OF IT_DISPLAY1 OCCURS 0, " Declaration of second display table.
OBJNR_N1 LIKE COEP-OBJNR_N1,
OBJNR_N12 LIKE COEP-OBJNR_N1,
KTEXT1 LIKE AUFK-KTEXT,
WKGBTR LIKE COEP-WKGBTR,
WOGBTR LIKE COEP-WOGBTR,
WKGBTR1 LIKE COEP-WTGBTR,
WOGBTR1 LIKE COEP-WOGBTR,
ADDK LIKE COEP-WOGBTR,
ADDO LIKE COEP-WOGBTR,
ADDK1 LIKE COEP-WOGBTR,
ADDO1 LIKE COEP-WOGBTR,
PROFIT1 LIKE COEP-WOGBTR,
PROFIT2 LIKE COEP-WOGBTR,
BEKNZ LIKE COEP-BEKNZ,
BUKRS LIKE AUFK-BUKRS,
anfaufnr like aufk-anfaufnr,
aufex like aufk-aufex,
OBJNR LIKE AUFK-OBJNR,
USER2 LIKE AUFK-USER2,
USER0 LIKE AUFK-USER0,
USER1 LIKE AUFK-USER1,
USER3 LIKE AUFK-USER3,
USER6 LIKE AUFK-USER6,
USER7 LIKE AUFK-USER7,
USER8 LIKE AUFK-USER8,
ABKRS LIKE AUFK-ABKRS,
USER9 LIKE AUFK-USER9,
PERIO LIKE COEP-PERIO,
AUFNR LIKE AUFK-AUFNR,
STR(5) TYPE C,
WORK(10) TYPE C,
END OF IT_DISPLAY1.
data : it_field type slis_fieldcat_alv, " Declaration of ALV variables
it_field_t type slis_t_fieldcat_alv,
xlayout TYPE slis_layout_alv.
data : it_event type slis_t_event,
wa_event like line of it_event.
DATA : WA_TOP TYPE SLIS_LISTHEADER,
IT_TOP TYPE SLIS_T_LISTHEADER.
data:w_lines type i,
w_occurs type i,
STR(5) TYPE C,
WORK(10) TYPE C.
constants : c_selection type char20 value 'Selection based on'. " Declaration of a constant.
selection-screen BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS S_BUKRS FOR AUFK-BUKRS OBLIGATORY.
SELECT-OPTIONS S_OBJNR FOR AUFK-AUFNR.
SELECT-OPTIONS S_ANF FOR AUFK-ANFAUFNR.
SELECT-OPTIONS S_AUFEX FOR AUFK-AUFEX.
SELECT-OPTIONS S_USER2 FOR AUFK-USER2.
SELECT-OPTIONS S_USER0 FOR AUFK-USER0.
SELECT-OPTIONS S_USER1 FOR AUFK-USER1.
SELECT-OPTIONS S_USER3 FOR AUFK-USER3.
SELECT-OPTIONS S_USER6 FOR AUFK-USER6.
SELECT-OPTIONS S_ABKRS FOR AUFK-ABKRS.
SELECT-options s_gjahr for coep-gjahr obligatory.
SELECT-OPTIONS S_PERIO FOR COEP-PERIO OBLIGATORY.
SELECTION-SCREEN END OF BLOCK BLK .
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
PARAMETERS : ONSITE RADIOBUTTON GROUP RADI.
PARAMETERS : OFFSHORE RADIOBUTTON GROUP RADI.
PARAMETERS : BOTH RADIOBUTTON GROUP RADI.
SELECTION-SCREEN END OF BLOCK BLK1 .
start-of-selection.
*ZAUFK
" Selection of records from aufk to internal table.
IF ONSITE EQ 'X' .
SELECT
BUKRS
KOKRS
OBJNR
KTEXT
anfaufnr
aufex
USER2
USER0
USER1
USER3
USER6
USER7
USER8
ABKRS
USER9
AUFNR
FROM AUFK INTO TABLE IT_AUFK WHERE BUKRS IN S_BUKRS AND
anfaufnr IN s_anf AND
aufex in s_aufex and
aufnr IN S_OBJNR AND
USER2 IN S_USER2 AND
USER0 IN S_USER0 AND
USER1 IN S_USER1 AND
USER3 IN S_USER3 AND
USER6 IN S_USER6 AND
ABKRS IN S_ABKRS AND
USER9 EQ 'X' .
ENDIF.
IF OFFSHORE EQ 'X'.
SELECT
BUKRS
KOKRS
OBJNR
KTEXT
anfaufnr
aufex
USER2
USER0
USER1
USER3
USER6
USER7
USER8
ABKRS
USER9
AUFNR
FROM AUFK INTO TABLE IT_AUFK WHERE BUKRS IN S_BUKRS AND
anfaufnr IN S_anf AND
aufex in s_aufex and
aufnR IN S_OBJNR AND
USER2 IN S_USER2 AND
USER0 IN S_USER0 AND
USER1 IN S_USER1 AND
USER3 IN S_USER3 AND
USER6 IN S_USER6 AND
ABKRS IN S_ABKRS AND
USER9 <> 'X'.
ENDIF.
IF BOTH EQ 'X'.
SELECT
BUKRS
KOKRS
OBJNR
KTEXT
anfaufnr
aufex
USER2
USER0
USER1
USER3
USER6
USER7
USER8
ABKRS
USER9
AUFNR
FROM AUFK INTO TABLE IT_AUFK WHERE BUKRS IN S_BUKRS AND
anfaufnr IN S_anf AND
aufex in s_aufex and
aufNR IN S_OBJNR AND
USER2 IN S_USER2 AND
USER0 IN S_USER0 AND
USER1 IN S_USER1 AND
USER3 IN S_USER3 AND
USER6 IN S_USER6 AND
ABKRS IN S_ABKRS.
ENDIF.
*& Include ZCOEP
" Selection of records from coep to internal table.
SELECT BUKRS KOKRS gjahr kstar OBJNR OBJNR_N1 PERIO BEKNZ WKGBTR WOGBTR FROM
COEP INTO TABLE
IT_COEP FOR ALL ENTRIES IN IT_AUFK WHERE OBJNR = IT_AUFK-OBJNR and
perio in S_PERIO.
*& Include ZPROFIT_CALC
" Calculations for income and Profit of the employee.
if not it_coep[] is initial.
select objnr gjahr wrttp versn kstar from cosp into TABLE It_cosp for
all entries in it_coep where objnr = IT_COEP-objnr .
endif.
LOOP AT IT_coep INTO WA_coep.
read table IT_aufk into WA_aufk with key OBJNR = wa_coep-OBJNR.
case it_cosp-kstar.
when '3000200'.
it_cosp-kstar = cosp-kstar.
when '3100040'.
it_cosp-kstar = cosp-kstar.
when '3100360'.
it_cosp-kstar = cosp-kstar.
when '3100055'.
it_cosp-kstar = cosp-kstar.
when '3100065'.
it_cosp-kstar = cosp-kstar.
when '3100115'.
it_cosp-kstar = cosp-kstar.
when '3100120'.
it_cosp-kstar = cosp-kstar.
when '3100130'.
it_cosp-kstar = cosp-kstar.
when '3100135'.
it_cosp-kstar = cosp-kstar.
when '3100140'.
it_cosp-kstar = cosp-kstar.
when '3100145'.
it_cosp-kstar = cosp-kstar.
when '3100150'.
it_cosp-kstar = cosp-kstar.
when '3100155'.
it_cosp-kstar = cosp-kstar.
when '3100160'.
it_cosp-kstar = cosp-kstar.
when '3100165'.
it_cosp-kstar = cosp-kstar.
when '3100170'.
it_cosp-kstar = cosp-kstar.
endcase.
IT_DISPLAY-BUKRS = WA_AUFK-BUKRS.
IT_DISPLAY-anfaufnr = WA_AUFK-anfaufnr.
it_display-aufex = wa_aufk-aufex.
IT_DISPLAY-OBJNR = WA_AUFK-OBJNR.
IT_DISPLAY-USER2 = WA_AUFK-USER2.
IT_DISPLAY-USER0 = WA_AUFK-USER0.
IT_DISPLAY-USER1 = WA_AUFK-USER1.
IT_DISPLAY-USER3 = WA_AUFK-USER3.
IT_DISPLAY-USER6 = WA_AUFK-USER6.
IT_DISPLAY-USER7 = WA_AUFK-USER7.
IT_DISPLAY-USER8 = WA_AUFK-USER8.
IT_DISPLAY-ABKRS = WA_AUFK-ABKRS.
IT_DISPLAY-USER9 = WA_AUFK-USER9.
IT_DISPLAY-KTEXT1 = WA_AUFK-KTEXT.
if WA_AUFK-abkrs = 01.
IT_DISPLAY-STR = 'TM'.
ENDIF.
IF WA_AUFK-ABKRS = 02.
IT_DISPLAY-STR = 'FP'.
ENDIF.
IF WA_AUFK-USER9 = 'X'.
IT_DISPLAY-WORK = 'ONSITE'.
ENDIF.
IF WA_AUFK-USER9 <> 'X'.
IT_DISPLAY-WORK = 'OFFSHORE'.
ENDIF.
it_display-ABKRS = it_display-user7.
IF wa_coep-BEKNZ = 'S'.
IT_DISPLAY-WKGBTR = WA_COEP-WKGBTR.
IT_DISPLAY-WOGBTR = WA_COEP-WOGBTR.
IT_DISPLAY-ADDK = IT_DISPLAY-ADDK + IT_DISPLAY-WKGBTR.
IT_DISPLAY-ADDO = IT_DISPLAY-ADDO + IT_DISPLAY-WOGBTR.
IT_DISPLAY-ADDK1 = 0.
IT_DISPLAY-ADDO1 = 0.
IT_DISPLAY-PROFIT1 = IT_DISPLAY-ADDK1 + IT_DISPLAY-ADDK.
IT_DISPLAY-PROFIT2 = IT_DISPLAY-ADDO1 + IT_DISPLAY-ADDO.
APPEND IT_DISPLAY.
ENDIF.
IF WA_COEP-BEKNZ = 'H'.
IT_DISPLAY-WKGBTR1 = WA_COEP-WKGBTR.
IT_DISPLAY-WOGBTR1 = WA_COEP-WOGBTR.
IT_DISPLAY-ADDK1 = IT_DISPLAY-ADDK + IT_DISPLAY-WKGBTR1.
IT_DISPLAY-ADDO1 = IT_DISPLAY-ADDO + IT_DISPLAY-WOGBTR1.
IT_DISPLAY-ADDK = 0.
IT_DISPLAY-ADDO = 0.
IT_DISPLAY-PROFIT1 = IT_DISPLAY-ADDK1 + IT_DISPLAY-ADDK.
IT_DISPLAY-PROFIT2 = IT_DISPLAY-ADDO1 + IT_DISPLAY-ADDO.
APPEND IT_DISPLAY.
ENDIF.
collect it_display into it_display1.
clear it_display.
ENDLOOP.
"calc
*& Include ZPROFIT_DISPLAY
LOOP AT IT_DISPLAY1. "it_display.
read table IT_COEP into WA_COEP with key OBJNR =
IT_DISPLAY-OBJNR.
read table IT_AUFK into WA_AUFK with key aufnr = IT_DISPLAY-aufnr.
if WA_AUFK-abkrs = 01.
STR = 'TM'.
ENDIF.
IF WA_AUFK-ABKRS = 02.
STR = 'FP'.
ENDIF.
IF WA_AUFK-USER9 = 'X'.
WORK = 'ONSITE'.
ENDIF.
IF WA_AUFK-USER9 <> 'X'.
WORK = 'OFFSHORE'.
ENDIF.
endloop.
clear it_field.
it_field-col_pos = 1.
it_field-fieldname = 'AUFNR'.
it_field-seltext_l = 'project id.'.
it_field-outputlen = 15.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 2.
it_field-fieldname = 'KTEXT1'.
it_field-seltext_l = 'Project Name'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 3.
it_field-fieldname = 'USER7'.
it_field-seltext_l = 'Start Date'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 4.
it_field-fieldname = 'USER8'.
it_field-seltext_l = 'End Date'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 5.
it_field-fieldname = 'USER2'.
it_field-seltext_l = 'Location'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 6.
it_field-fieldname = 'USER0'.
it_field-seltext_l = 'Vertical'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 7.
it_field-fieldname = 'USER1'.
it_field-seltext_l = 'Sub_vertical'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 8.
it_field-fieldname = 'USER3'.
it_field-seltext_l = 'Technology'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 9.
it_field-fieldname = 'USER6'.
it_field-seltext_l = 'Department'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 10.
it_field-fieldname = 'WORK'.
it_field-seltext_l = 'Onsite/Offshore'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 11.
it_field-fieldname = 'STR'.
it_field-seltext_l = 'T&M/FP'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 12.
it_field-fieldname = 'KOSTL'.
it_field-seltext_l = 'EMP COST'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 13.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'STAFF WELFARE'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 14.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'RECRUITMENT'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 15.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'TRAVELS'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 16.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'SUBCONTRACT'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 17.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'COMMUNICATION'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 18.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'RENT'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 19.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'BACKEND COST (PROJECT EXP)'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 20.
it_field-fieldname = 'ADDO'.
it_field-seltext_l = 'Direct costs'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 21.
it_field-fieldname = 'ADDO1'.
it_field-seltext_l = 'Income'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 22.
it_field-fieldname = 'PROFIT2'.
it_field-seltext_l = 'Profit(income-costs)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 23.
it_field-fieldname = 'ADDK'.
it_field-seltext_l = 'Direct costs(Grp cur)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 24.
it_field-fieldname = 'ADDK1'.
it_field-seltext_l = 'Income(Grp Cur)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 25.
it_field-fieldname = 'PROFIT1'.
it_field-seltext_l = 'Profit(income-costs)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
xlayout-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = 'ZPROJECT_PROFIT1'
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE_PROFIT'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = xlayout
IT_FIELDCAT = it_field_t
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_DISPLAY1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear it_field_t.
"it_display.
FORM USER_COMMAND using r_ucomm like sy-ucomm rs type slis_selfield.
include zinteractive_profit."Secondary list for calling KO03.
ENDFORM. "USER_COMMAND.
Thanks & Regards,
Lakshmi..Hi,
i did according to ur suggession.
now it is going dump.
and it is telling like this.
2629 i_event_name = 'SUBTOTAL_TEXT'
2630 is_subtottxt_info = ls_subtot_info
2631 ip_subtot_line = lr_data
2632 changing
2633 c_subtottxt = l_subtottxt.
2634 ls_lvc_data-value = l_subtottxt.
2635
2636 append ls_lvc_data to ct_lvc_data.
2637 endif.
2638
2639 ************************************
2640 * Column per Fieldcat Entry
2641 ************************************
2642 clear ls_lvc_data-style.
2643 loop at it_fcat_local assigning <ls_fcat>
2644 where tech ne 'X' and no_out ne 'X'.
2645 if l_invisible eq 'X'.
2646 clear l_invisible.
2647 if <ls_fcat>-do_sum is initial.
2648 continue.
2649 else.
2650 clear ls_lvc_data-col_pos.
2651 endif.
2652 endif.
2653
2654 add 1 to ls_lvc_data-col_pos.
2655
2656 assign component <ls_fcat>-fieldname
2657 of structure <ls_data> to <l_field_val
2658 if sy-subrc ne 0.
>>>>> message x000(0k).
2660 endif.
2661
2662 *... work on average
2663 if <ls_fcat>-do_sum eq 'C'.
2664 clear l_entries.
2665
2666 assign space to <l_unit>.
2667 if not <ls_fcat>-cfieldname is initial.
2668 assign component <ls_fcat>-cfieldname
2669 of structure <ls_data> to <l_unit>.
2670 endif.
2671 if not <ls_fcat>-qfieldname is initial.
2672 assign component <ls_fcat>-qfieldname
2673 of structure <ls_data> to <l_unit>.
2674 endif.
2675
2676 l_from = ls_grpl-index_from.
2677 l_to = ls_grpl-index_to.
2678 if ls_grpl-index_from is initial and
plz any of u help me to come out with solution.
Thanks & Regards,
Lakshmi..
Maybe you are looking for
-
Single Webdynpro Application with multiple JCO Connection ?
Hi Experts, I have a strange requirement ...... We have a Webdynpro Application which is connected to say (using JCO connection) client:- A now i want to connect the same Webdynpro application to Client:- B which is again in the same server as the cl
-
Cannot Connect to the iBooks Store
When I open the iBooks store in Mavericks I get "Cannot Connect to the iBooks Store". Also, in Safari anything it cannot connect to anything that uses HTTPS (secure/encrypted connection) such as Twitter. However I do not know if that persisted from M
-
Oracle O-patch installation & client installation for 9.2.0.8
hello guys I have recently applied oracle patch set to Oracle 9.2.0.8 from 9.2.0.2, i ran checkdb after that it gave some ORA_00600 errors however it being a quality system i ran update stats immediately & then following checkdb, it did not give that
-
How to handle the deleted records from R3
Hello, We have created a generic data source on a database table in R3 side and now we have a case where there is a huge volume of data gets deleted and new records get updated every day. By doing a delta load we are able to load the New records and
-
Log shows numerous "Allow sshd-keygen-wrapper connecting from"
Recently my security logs have been showing the message "Allow sshd-keygen-wrapper connecting from ...." which has me concerned because this started happening about 3 weeks ago, and at the same time, I had a credit card compromised... too long a stor