Help needed in BPC 10 Member Formula

Hello Experts,
We are in BPC 10 NW SP 11.
Facing below error in report for Ratios hierarchy after
member formula is built.
Formulas is related to ratio
IIF([ACCOUNT_GL].[RE_IREV]=0, NULL, [ACCOUNT_GL].[RE_IAADJ]/[ACCOUNT_GL].[RE_IREV]);SOLVE_ORDER=10
RE_IREV is Income node
RE_IAADJ is expense node.
I have tried formula by removing square brockets for ACCOUNT
DIM member. Still no success.
Surprisingly, same formula, same hierarchy works fine in
another Model.
I have also compared measures in both the models, both are
identical.
Error in the report as below.
Server message:
code: UJO_READ_EXCEPTION_018
severity: error
description: MDX statement error: Value RE_IREV
/CPMB/WADNXJI for characteristic /CPMB/WADNXJI unknown
log id: KoFXP08mHM3X08002fJHZW
DATAVALUE: Value RE_IREV /CPMB/WADNXJI for characteristic
/CPMB/WADNXJI unknown
MDX: WITH MEMBER
[Measures].[PERIODIC] AS 'IIF([/CPMB/WADNXJI
PARENTH2].[2/CPMB/ACCTYPE]="INC",-[Measures].[/CPMB/SDATA],IIF([/CPMB/WADNXJI                 PARENTH2].[2/CPMB/ACCTYPE]="EXP",[Measures].[/CPMB/SDATA],IIF([/CPMB/WADNXJI
PARENTH2].[2/CPMB/ACCTYPE]="AST",([Measures].[/CPMB/SDATA],
CLOSINGPERIOD([/CPMB/WADBQQD
PARENTH1].[LEVEL02])),IIF([/CPMB/WADNXJI                 PARENTH2].[2/CPMB/ACCTYPE]="LEQ",-([Measures].[/CPMB/SDATA],
CLOSINGPERIOD([/CPMB/WADBQQD
PARENTH1].[LEVEL02])),-[Measures].[/CPMB/SDATA]))))' SOLVE_ORDER=3 MEMBER [/CPMB/WADNXJI                 PARENTH2].[RE_ALAE_RATIO] AS
'IIF([/CPMB/WADNXJI
PARENTH2].[RE_IREV                         /CPMB/WADNXJI]=0,
NULL, [/CPMB/WADNXJI
PARENTH2].[RE_IAADJ
/CPMB/WADNXJI]/[/CPMB/WADNXJI                 PARENTH2].[RE_IREV                         /CPMB/WADNXJI])'
SOLVE_ORDER=10 SELECT NON EMPTY {[/CPMB/WADBQQD                 PARENTH1].[2013.Q1                         /CPMB/WADBQQD]
,[/CPMB/WADBQQD
PARENTH1].[2013.Q2                         /CPMB/WADBQQD]
,[/CPMB/WADBQQD                 PARENTH1].[2013.Q3                         /CPMB/WADBQQD]
,[/CPMB/WADBQQD
PARENTH1].[2013.Q4                         /CPMB/WADBQQD]
,[/CPMB/WADBQQD
PARENTH1].[2013.TOTAL                      /CPMB/WADBQQD] } * {[/CPMB/WADNXJI                 PARENTH2].[RE_ALAE_RATIO]
,[/CPMB/WADNXJI
PARENTH2].[RE_ALL_RATIOS                   /CPMB/WADNXJI] ,[/CPMB/WADNXJI                 PARENTH2].[RE_COMBINED_RATIO]
,[/CPMB/WADNXJI
PARENTH2].[RE_EXPCOMM_RATIO] ,[/CPMB/WADNXJI                 PARENTH2].[RE_LOSS_RATIO]
,[/CPMB/WADNXJI
PARENTH2].[RE_OTHERCOMM_RATIO] ,[/CPMB/WADNXJI                 PARENTH2].[RE_STAT_COMB_RATIO]
,[/CPMB/WADNXJI
PARENTH2].[RE_STAT_EXP_RATIO] ,[/CPMB/WADNXJI                 PARENTH2].[RE_TOT_EXP_RATIO]
,[/CPMB/WADNXJI
PARENTH2].[RE_TOT_LOSS_RATIO] ,[/CPMB/WADNXJI                 PARENTH2].[RE_ULAE_RATIO] } ON
0 from
[/CPMB/WAMSZKS/!!O/CPMB/WAMSZKS]
WHERE ( [Measures].[PERIODIC] ,[/CPMB/WAD3OFZ                 PARENTH1].[ACTUAL]
,[/CPMB/WAD0VHV
PARENTH1].[ALL_CHANNELS                    /CPMB/WAD0VHV] ,[/CPMB/WAD021F                 PARENTH1].[LEGAL                           /CPMB/WAD021F]
,[/CPMB/WADME7W                 PARENTH1].[ALL_DATASRC                     /CPMB/WADME7W]
,[/CPMB/WAD0DZ0
PARENTH1].[FGI
/CPMB/WAD0DZ0] )
V1:Value RE_IREV /CPMB/WADNXJI for characteristic /CP
V2:MB/WADNXJI unknown
V3:
V4:
Thanks,
Senoy

Hello Vadim,
Thanks for the reply.
I am able to process ACCOUNT_GL dimension.
Also, I am using standard TIME dimension.
I found that the virtual provider(created by using source of data for my model) too is showing the error, when I place above member formula.
I am attaching the error messae when I try to do list records in the virtual provider.
When I remove the member formula, everything is fine
Thanks

Similar Messages

Help needed in BPC Script

Hello Experts,
I have a requirement to migrate the BPC 7.5MS version scripts to BPC 10 NW Script.
When I try to copy the existing working BPC 7.5 MS script to NW Script, I get validation error as BPC 10 script doesn't understand few lines.
Below are the lines which are getting errors.Could you please help in giving me the equivalent BPC 10 NW commands for below lines
1)*MEMBERSET (%ACT%,"Descendants([ACCOUNT].[H1].[PNC_GPW],999,leaves)")
2)*Calculate_Difference = 0
3) Will BPC 10 accept time=next(11) command? It is not giving any validation error
I am also attaching the existing BPC 7.5MS script in this thread as below.
Thanks,
Senoy

Hi Senoy,
It's practically impossible to "migrate" MS scripts to NW - so many differences, each script have to be rewritten with understanding of business logic (not just script translation).
1)*MEMBERSET (%ACT%,"Descendants([ACCOUNT].[H1].[PNC_GPW],999,leaves)")
Something like:
*XDIM_MEMBERSET ACCOUNT AS %ACT%=BAS(PNC_GPW)
2)*Calculate_Difference = 0
Not supported, always full value is send but delta is written
3) Will BPC 10 accept time=next(11) command? It is not giving any validation error
next is not supported, TMVL(11,%TIME_SET%) can be used in some cases.
And please, read the standard help for script logic in BPC NW 10. All supported keywords are mentioned here:
Logic Keyword Reference
Vadim

Need help in member formula

Hi All,
i need a help in memberformula
i've two sparce dimenions as below:
Dim1:
A
--B
--C
Dim2:
a
---b
---c
d
---e
---f
i need to write member formula on C from Dim1 if member is parent level member from dim2 then its to sum up with its childen values against B from dim1.
If member is parent level memer from dim2 ex:d
C->d = B->e + B->f
Thanks in advance,
Kiran
Edited by: kirannch on Oct 16, 2012 4:16 PM

Hi Tim,
Thanks for your response.
I'm using all HFM dimensions in Essbase Except Cust2 and Cust4.
In my outline Account, Period and Year are dense dimensions and rest are Sparse.
i'm comparing the data at parenttot with usdtot, contr as we are using flat members.
Below script is not updating any parent level value of USDTOT combination. i'm running the aggregation with exclude elim data before executing this calc script.
USDTOT,Contr are sparse dimension members and Entity also sparse.
Please can you help on the below scripts.
SET CALCPARALLEL 3;
SET AGGMISSG OFF;
SET FRMLBOTTOMUP OFF;
SET CACHE HIGH;
SET LOCKBLOCK HIGH;
EXCLUDE ( "Elim")
/Calculation "USDTOT" at Parent level of Entity Dimension with sum of children same parent entity with Contr member */
SET UPDATECALC OFF;
FIX("ACT","FY12")
"USDTOT"(
IF(NOT @ISLEV("ENTITY", 0));
"USDTOT" = @SUM(@CHILDREN(@CURRMBR("ENTITY"->"Contr")));
ENDIF;);
ENDFIX;
ENDEXCLUDE;
Thanks in advance,
Kiran
Edited by: kirannch on Oct 24, 2012 7:38 PM

How to use user variable in Member Formula

Hi All
I have to write a member formula for %linearity quarter for a weekly application.This member will be used in reports and we do not want to do this calculation in reports, hence need to write member formula. The formula is
Week1 of Q1 forecast / Q1 Total Forecast , Week2 of Q1 Forecast/ Q1 Forecast.............,Week15 of Q2 forecast/ Q2Total Forecast.......and so on.
According to me it should work in the below mentioned manner , but need help in improvising the formula.
If(@ismbr("Weeks1") or @ismbr("Weeks2") or @ismbr("Weeks3") or @ismbr("Weeks4") or @ismbr("Weeks5") or @ismbr("Weeks6") or @ismbr("Weeks7") or @ismbr("Weeks8") or @ismbr("Weeks9") or @ismbr("Weeks10") or @ismbr("Weeks11") or @ismbr("Weeks12") or @ismbr("Weeks13") or @ismbr("Weeks14") )
"Current_Forecast"/"Q1"->"Current_Forecast";......
If anybody can help in suggesting how can i use user variable in this formula to achieve the required result.
Thanks

Hi
Thanks for the suggestion and it would be a better idea to use ISIDESC as compared to ISMBR.
I also wanted to ask if in the below mentioned formula if the result of first line is true than will the second line pick the current_forecast value of the respective member of Q1 and divide it by the current_forecast value of Q1.
IF(@ISIDESC("Q1"))
"Current_Forecast"/"Q1"->"Current_Forecast";
Also i need to know how can i write a member formula for week YOY% using user variables.The general formula is
Week 1 of FY13 - Week 1 of FY12/Weeks 1 of FY12
Week 2 of FY13 - Week 2 of FY12/Weeks 2 of FY13 and so on till week 53.
Thanks

Need to create a dimension member formula refering hierarchy.

Hello Experts ,
System : BPC 10 NW SP 11
Dimension : BOOK – entity type
Dimension : ACCOUNT - Account type
Scenario : create a ACCOUNT dim member formula effecting only members exists in Entity dimension PARENTH3, with property MGMT_CALC = Calc.
I tried below syntax : but none of them working.
IIF([BOOK.PARENTH3].CURRENTMEMBER.PROPERTIES("MGMT_CALC")="CALC", (IIF ([PNC_REV]=0,0,[ACCOUNT].[PNC_UUND_TOT]/[ACCOUNT].[PNC_REV])),NULL); SOLVE_ORDER=10
IIF([BOOK].[PARENTH3].CURRENTMEMBER.PROPERTIES("MGMT_CALC")="CALC", (IIF ([PNC_REV]=0,0,[ACCOUNT].[PNC_UUND_TOT]/[ACCOUNT].[PNC_REV])),NULL); SOLVE_ORDER=10
IIF([BOOK.H3].CURRENTMEMBER.PROPERTIES("MGMT_CALC")="CALC", (IIF ([PNC_REV]=0,0,[ACCOUNT].[PNC_UUND_TOT]/[ACCOUNT].[PNC_REV])),NULL); SOLVE_ORDER=10
In case I am not reading hierarchy as in below syntax, it works fine.
IIF([BOOK].CURRENTMEMBER.PROPERTIES("MGMT_CALC")="Calc", (IIF ([PNC_REV]=0,0,[ACCOUNT].[PNC_UUND_TOT]/[ACCOUNT].[PNC_REV])),NULL); SOLVE_ORDER=10
The requirement is to read PARENTH3 members with specific property value.
Thanks in advance
Pavan

Hi Pavan,
I believe there is a similar thread to which I have responded.
Your formula is based on a condition with a property. A property value is applicable to the member irrespective of which hierarchy it belongs to. So, why do you need to consider the hierarchy for your formula?
Hope this helps.

BPC NW 10 Member formula

Hello Experts,
I have a BPC NW 10 requirement to calculate member formula for Account Dimension.
SALES_TTM(Total Sales - 12months Trailing) which is SALESTOT+(SALESTOT, Prior Period)+(SALESTOT, Prior Period 2)+(SALESTOT, Prior Period 3)+(SALESTOT, Prior Period 4)+(SALESTOT, Prior Period 5)+(SALESTOT, Prior Period 6)+(SALESTOT, Prior Period 7)+(SALESTOT, Prior Period 8)+(SALESTOT, Prior Period 9)+(SALESTOT, Prior Period 10)+(SALESTOT, Prior Period 11).
SALESTOT member is not a Base Member.Its a node which has several Base members in it.
How Can I write a Member Formula for the above requirement?
Thanks

Hello Vadim,
I was able to write the formula and test it properly using LAG functionality for time,
I have a similar requirement for YTD model and posted it in a seperate post.I have written a formula but couldnt make it dynamic to make it work for all years
Can you please help?
Below is the link
http://scn.sap.com/thread/3607494
Thanks

SAP BPC - Recursive Dimension Member Formulas

Hi BPC community,
We have a customer requirement to create recursive dimension member formulas. Has anyone dealt with this topic before?
Example:
Account A = Account B * .05
Account B = Account A + Account C.
Account D = Account B * .10
Thanks,
Jeff Holdeman
EPM RIG

Hi Nicolas,
Thanks for pointing us in the right direction. The math actually turns out a little different, as I think you slipped a decimal. But none the less, your contribution is MUCH appreciated.
Here is the proposed solution. For more details, we also need to utilize the solve_order parameter to force the system to calculate the dimension formulas in the proper sequence. Zero is the highest priority.
Assume...
A = B * .05
B = A + C
C = input
D = B * .10
Therefore solving for B...
B = (B * .05) + C
B = .05B + C
B - .05B = C
.95B = C
B = (1 / .95) * C
And...
D = (1 / .95) * C * .10
For example, if C = 100...
B = (1 / .95) * 100 = 105.26
A = 105.26 * .05 = 5.26
D = 105.26 * .10 = 10.53
I'll assume there are two accounts for "C"; one for input and one as a formula.
[Account].[C] = [Account].[C input][, solve_order = 1]
[Account]. = [Account].[C] * 1 / .95[, solve_order = 2]
[Account].[A] = [Account]. * .05[, solve_order = 3]
[Account].[D] = [Account]. * .10[, solve_order = 4]
Edited by: Jeffrey Holdeman on Aug 11, 2008 5:58 PM

BSO to ASO Formula Conversion - Help Needed

ASO is not my forte...I am trying to get a simple formula to work in ASO cube as part of BSO->ASO conversion.
If it is level 0 entity, the formula is (Last Shipped (PU) * Part Volume)...works fine.
If its upper level, it should just sum the values of its children. The BSO equivalent that we typically use is @SUM(@CHILDREN(@CURRMBR("Entity"))).
I attempted the same in the ASO MDX script as shown below, it is not yielding me the correct result....any thoughts why this is not working?
Thanks in advance.
Nima
Member Formula*
CASE WHEN ISLEVEL(Entity.CurrentMember, 0) THEN+
Last Shipped (PU) x Part Volume+
ELSE+
SUM(Children(Entity.CurrentMember))+
END+
Edited by: Nima.V on Nov 12, 2008 7:12 PM

Have you tried specifying which measure you want it to sum?
e.g.
CASE WHEN ISLEVEL(Entity.CurrentMember, 0) THEN
Last Shipped (PU) x Part Volume
ELSE
SUM(Children(Entity.CurrentMember), [Measure].[Part Volume])
END
also I'm not sure whether the SUM is correct. This might work as it definately specifies the tuples:
SUM({Products.CurrentMember.children},[Measures].[Part Volume])
hope it helps,
Gee

Help Needed with a Formula

Can someone help me with a particular formula I need?
I’ve set up a simple sheet to track budget spending for Christmas.
http://i623.photobucket.com/albums/tt320/_dash/NumbersShot.png
Let’s say we have $500 to spend. What I want to do is have it so that when a purchase amount is entered into D3, D9 would then show $500 less that amount (thus automatically reflecting how much is left to spend without having to do the math).
Then later when an amount is entered into D4, D9 would show $500 less the amounts in D3 and D4, etc.
What formula would I need to put in D9 for this?

I figured it out.
In case this will help someone, I put the total available to spend in D2 and then put this formula in D9:
=D2-SUM(D3:D8)

Which is faster - Member formula or Calculation scripts?

Hi,
I have a very basic question, though I am not sure if there is a definite right or wrong answer.
To keep the calculation scripts to a minimum, I have put all the calculations in member formula.
Which is faster - Member formula or calculation scripts? Because, if i am not mistaken, FIX cannot be used in member formulas, so I need to resort to the use of IF, which is not index driven!
Though in the calculation script,while aggregating members which have member formula, I have tried to FIX as many members as I can.
What is the best way to optimize member formulas?
I am using Hyperion Planning and Essbase 11.1.2.1.
Thanks.

The idea that you can't reference a member formula in a FIX is false. Here's an example:
- Assume you have an account that has a data storage of Stored or Never Share.
- This account is called Account_A and it has a member formula of Account_B * Account_C;.
- You would calculate this account within a FIX (inside of a business rule) something like this:
FIX(whatever . . . )
"Account_A";
ENDFIX
If you simply place the member named followed by a semi-colon within a business rule, the business rule will execute the code in the in that member's member formula.
Why would you want to do this instead of just putting ALL of the logic inside the business rule? Perhaps that logic gets referenced in a LOT of different business rules, and you want to centralize the code in the outline? This way, if the logic changes, you only need to update it in one location. The downside to this is that it can make debugging a bit harder. When something doesn't work, you can find yourself searching for the code a bit.
Most of my applications end up with a mix of member formulas and business rules. I find that performance isn't the main driving force behind where I put my code. (The performance difference is usually not that significant when you're talking about stored members.) What typically drives my decision is the organization of code and future maintenance. It's more art than science.
Hope this helps,
- Jake

Member formula in Essabse

Hi,
Its basic question I am looking for clarification.
For any member with Member formula need to be Dynamic.
I mean if that member formula needs to be considered that particular member needs to be Dynamic. is that correct. I am really confused.
Any help will be greatly appreciated

Not necessarily, you can have a formula member as "stored" in which case the member will be calculated when a default (non intelligent) calc all, or when you run a calc script that explicitly or implicitly calcs the member.
In the DBAG take a look at Understanding Formula Calculation

Member Formula in Outline

Using the members:
__Measure: (dense)_
Exchange rate_local rate
cost
currency(sparse)
-usd
-gbp
Mkt(sparse)
Pdt (sparse)
in measures, I tried adding a formula against local rate
if
*(cost>0),*
local rate (member) = cost / fxrate-> anymkt->anypdt;
endif
I have 8 different currencies. Costs and not every combination will have cost against them. The cost is loaded against different currencies depending on market and product.
Eg.
Cost->mkt1-> pdt13->usd=1.5
Cost->mkt1-> pdt13->gbp=4.8
Fxrate-> usd->anymkt->anypdt=0.85
Fxrate->gbp-> anymkt->anypdt=0.25
My issue is I am not getting any results. I thought if you don’t specify the dimensions in your formula, Essbase will calculate for every possible combinations? If that is right, I should be getting something. I have made the member a dynamic calc so I can get instant results and yet don’t get them.

In ASO architecture, if you want to aggregate these multiplied values you probably want to do the multiplication prior to loading so the sum of the products rolls up. Right now, you can't have the multiplication done in MDX and then have ASO aggregate. It's mostly a performance concern; you can do the multiplication and aggregation in one formula if you want. The basic multiplication is just [Standard Material Per Unit] * [Units Sold] To aggregate, you need to wrap in additional clauses. I've attached code here so you can see it with indenting- I believe that consistent indenting helps catch a lot of syntax errors. You will also need to assign the formula to a new member (account or otherwise). If you only want to see the values at level-0 and you don't want them aggregated, it's very easy: iif ( [Product].CurrentMember.[LEVEL_NUM] = 0, [Standard Material Per Unit] * [Units Sold], MISSING )

If Conditon in Hyperion Member Formula

Hi All,
I am developing a classic planning Hyperion Application using EPM 11.1.2.2.
I came across a situation where i need to use an "IF Condiotn" inside a member formula. I am not sure of its syntax, can some help me with that.

Hi
There is a slight difference when using IF statements in member formulas. You don't need to specify the member block association in a member formula
In a calc script
"Account"(
                IF(@IMBR(Jan))
      "member1" * "Member2";
                 ENDIF)
In a member formula
             IF(@IMBR(Jan))
                "member1" * "Member2";
                 ENDIF
Thanks
Anthony

@ATTRIBUTESVAL works properly in Calc script but not in Member Formula.

We are using Essbase 11.1.2 –
"Global_Period" is a Dynamic Calc Member. Below is its Member Formula:
"ProjType " is an attribute (text) dimension.
"Global_Period" ="ValidAccount";
IF (@ISLEV ("Total_Expenses", 0) AND @ISMBR("HSP_InputValue") AND @ISLEV ("Version",0) AND
@ISMBR("No_GL_Account") AND @ISLEV ("Scenario",0) AND @ISLEV ("Years",0) AND @ISMBR ("Local")
AND @ISLEV("Tot_Org",0) AND NOT @ISIDesc ("Service_Division") AND @ISLEV("Tot_PRJ",0) )
"Global_Period"->"No_GL_Account"-> @CURRMBR ("Projects") =
1* "ValidAccount"->"Global_Version" ->"Global_Scenario"->&Budget_Year->"Global_Entity"->
"No_GL_Account"->"HSP_InputValue"->"Local"->
@MEMBER(@NAME(@CONCATENATE ("Proj_",@ATTRIBUTESVAL("ProjType"))));
ENDIF
The above Member- Formula is failed to work when opening a Data Form that contain "Global_Period".
The error messages in the log file are as follow:
[Thu Mar 1 16:55:39 2012]Local/Projects/Plan1/admin@Native Directory/1122748736/Error(1200370)
Error executing formula for [Global_Period] (line 1): attempt to cross a null member in function [@X]
[Thu Mar 1 16:55:39 2012]Local/Projects/Plan1/admin@Native Directory/1122748736/Error(1200370)
Error executing formula for [Global_Period] (line 0): attempt to cross a null member in function [@_VAL]
When converting the "Global_Period" to be a Store member.
The Calc Script below is exactly equivalent to the Formula, and run perfectly with no Errors.
"Global_Period" ="ValidAccount";
FIX ("HSP_InputValue", "Local","No_GL_Account", @RELATIVE ("Total_Expenses", 0),
@RELATIVE ("Version",0), @RELATIVE("Scenario",0), @RELATIVE ("Years",0),
@REMOVE (@RELATIVE ("Tot_Org",0),@IDESCENDANTS ("Service_Division")),
@RELATIVE ("Tot_PRJ",0))
SET CREATENONMISSINGBLK ON;
"Global_Period"
("Global_Period"->"No_GL_Account" -> @CURRMBR ("Projects")=
1* "ValidAccount"->"Global_Version" ->"Global_Scenario"->&Budget_Year->
"Global_Entity"->"No_GL_Account"->"HSP_InputValue"->"Local"->
@MEMBER(@NAME(@CONCATENATE ("Proj_",@ATTRIBUTESVAL("ProjType"))));
SET CREATENONMISSINGBLK OFF;
ENDFIX
For many reasons we prefer to use the Dynamic Calc Formula for "Global_Period".
As result of some checking I discover that the problem is with the function @ATTRIBUTESVAL,
because the formula has worked fine when I replace the @ATTRIBUTESVAL with a string.
Please help, what is the right way to write the formula in order to make it work.
Thanks
Tami Kedem

Dear Cameron Lackpour,
Thank you very much, for your reply.
I'd given it a try, but it didn't help.
The purpose of this formula is as follow:
We holds 1's (ones) for allowable combinations of "Project_Type and Accounts", namely, each project type has different list of accounts that are allowed for input.
I need to populate the input 1's to all projects (and their children) according to its "ProjType".
The Data forms has periods in columns, thus by putting "Global_Period" (Hide) as the first column, and use "Suppress Missing rows" - for each project (on the "Page") , the form will show just the allowable Accounts in rows.
(we have around 300 Accounts, 50,000 members in Project dimension and around 25 Types of projects).
Please help.
Thanks!
Regards,
Tami Kedem

How to use local variable in member formula?

Hi Expert,
We would like to use a {local variable} in a member formula, so that it can pick up the prompt from webform upon save. Would like to know if it is possible to do? If so, what is the correct syntax?
We attempted to use brace {scenario}, blacket [scenario], blacket with quote ["scenario"]. None of these work.
We are using 11.1.2.1 version, EPMA, Hyperion Planning.
Thanks in advance for your help!

One other pointer. Where did you define your variable? Hopefully you went into Calc Manager and selected <Tools>, <Variables>. From there, navigate to your application or database. Right-click on your application or database and select "New". In the bottom panel, you'll need to select your Variable Type. Make sure you select "Member", and not "Members". You cannot pass "Members" (plural) to a web input form. Also, if you want to define a variable for a custom dimension, you'll need to do it at the database level. Standard dimension member variables can be defined at the app level. (Not sure why this is the case, especially when my custom dimension exists in all plan types . . . . )
Anyway, hope this helps,
- Jake

Help needed in BPC 10 Member Formula

Similar Messages

Maybe you are looking for