Help needed in configuring ADS

Hi
I finished installing the Adobe Documeny service (of NW2004s) in a 32 bit win 2003 server with both Java+ABAP stack.
As described in the ADS Configring Guide, I wanted to check Basic Authentication and when I try the link http://<Servername>:50100/AdobeDocumentServices/Config/
I get a page cannot be displayed page. When I tried to login to VA I get the message unable to lookup conenction default, http://<servername>:8100/msgserver/text/logon returned empty list of connection parameters
also I created a direct connection to a dispatcher node and still unable to login, I used the admin username and the admins passowrd.
Pelase help
Thanks
Regrards
Luke

Hello Luke,
As your problem seems to be a more general one (i.e. independent from Interactive Forms by Adobe), I would propose to either post this question to another forum or to create an OSS message. It really seems that your installation failed somehow...
Regards,
Philipp

Similar Messages

Help needed in configuring AQJMS Adapters

hi
We are working on Soa 11g
we need help to configure the following,
1) configuration of JMS adapter from a BPEL service and
2) weblogic server side configuration
to consume JMS messages from RIB AQ RMS service.
The version details of the softwares used are as follows,
1) RIBAQ is 13.2
2) RMS 13.2
3) weblogic 10.3.2
4) Oracle soa 11.1.1.2
we have configured the following
1. a data source with jndi name 'jdbc/rmsjms'was created to connect to the RIBAQ database.
2. a jms module was created
3. a foreign server was created within the jms module
4. the foreign server had 'JNDI PRoperties'assigned to 'datasource=jdbc/rmsjms'and JNDI Initial Context Factory to 'oracle.jms.AQjmsInitialContextFactory'
5.the foreign server points to two foreign destination topics
4. the destinations had to be given a remote JNDI and Local JNDI names
5. a connection factory bearing reference to the JNDIname of JMS adapter viz.eis/aqjms/Topic was created.
kindly clarify on the following points.
1. what is expected to be the value and format of 'JNDI Properties' within the foreign server.
2.what is expected to be the value of remote JNDI and Local JNDI names of the remote destinations in the foreign server
3.which of these shd reflect in the adapter configuration in the bpel code.
TIA

1. what is expected to be the value and format of 'JNDI Properties' within the foreign server.In the JNDI Properties field, enter datasource=<datasource jndi location>. Replace the place holder with the JNDI location of your data source.
2.what is expected to be the value of remote JNDI and Local JNDI names of the remote destinations in the foreign server In the Local JNDI Name field, enter the local JNDI name you would use in your application/composite to look up this destination.
In the Remote JNDI Name field, enter Queues/<queue name>if the destination is a queue, or enter Topics/<topic name> if the destination is a topic.
3.which of these shd reflect in the adapter configuration in the bpel code.As mentioned above, use Local JNDI Name in adapter configuration in composite.
Please refer section "8.4.8 AQ JMS Text Message" at below link -
http://docs.oracle.com/cd/E17904_01/integration.1111/e10231/adptr_jms.htm#BABGFCJH
Regards,
Anuj

Help needed in configuring Oracle 9i AS Server

Frineds,
I am new to Oracle9i AS. Please help me configuring Oracle9i AS
regards
Mathew

Hi Mathew,
Can you elaborate your question ? What kind of help do you need ?
Regards,
Sandeep

[SOLVED] Help needed to configure postfix

I aim to be able to manage myself my mailserver.
For now i just need help in order to configure postfix so i can send an email from my postfix configured mail to my gmail account.
I've read the following wiki pages :
https://wiki.archlinux.org/index.php/postfix
https://wiki.archlinux.org/index.php/Si … ail_System
Wich are really not informative.
I've my own domain name, wich can be pinged, i will call it : domain.free.fr
Here is what i've done so far :
Install postfix :
sudo pacman -S postfix
Configure myhostname in /etc/postfix/main.cf
myhostname = domain.free.fr
Configure the username in /etc/postfix/aliases
root: glow
Reload aliases and postfix
newaliases
postfix reload
postfix status
postfix/postfix-script: the Postfix mail system is running: PID: 11706
Then i've tried to use sendmail to send an email to my gmail adress :
sendmail [email protected]
Test
Nothing coming in my mail.
What do i do wrong ?
Ican't find any log about postfix, /var/log/mail.log do not exist, is this normal ?
Last edited by GloW_on_dub (2014-03-31 15:45:54)

mailq
-Queue ID- --Size-- ----Arrival Time---- -Sender/Recipient-------
CCD29FF253 262 Mon Mar 31 16:58:37 [email protected]
(delivery temporarily suspended: connect to alt4.gmail-smtp-in.l.google.com[74.125.25.27]:25: Connection timed out)
[email protected]
-- 0 Kbytes in 1 Request.
My mail is in the queue, but cannot be delivered
Last edited by GloW_on_dub (2014-03-31 15:03:51)

Help needed in configuring Dynamic F4

Hi All
I am trying to configure Dynamic F4 help for Actvities appln.
In Actvities Appln I have the Partners tab.In this Partner tab I have partner function and partner Id fields. When I make a search for partner Id I need to launch the search screen based on thepartner function selected.
I guess we can use dynamic F4 help but how to achieve this I am not sure. If anyone has done simliar stuff please do give your inputs.
Thanks
Regards
Senthil

Hi Senthil,
You can use Search Help Exit for your problem.
Search help exit : A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain time points in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
A search help exit is called repeatedly in connection with several
Events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
For more detailed information please refer to the documentation describing the concept of the search help exit.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Time Points :
During the input help process, a number of time points are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these time points. If required, the search help exit can also influence the process and even determine that the process should be continued at a different time point.
The following time points are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This time point can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next time point.
The time point is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this time point in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values.
This time point is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this time point with a search help exit. DISP should be set as the next time point.
5. DISP
Before displaying the hit list. This time point is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next time point)
The RETURN time point should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this time point if control of the process sequence of the Transaction should depend on the selected value (typical
example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this time point if the input help is controlled by a collective search help. It directly follows the time point RETURN. The search help exit of the collective search help, however, is called at time point RETTOP.
8. EXIT (only for return as next time point)
The EXIT time point should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE time point is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these time points are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at time points SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other time points the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, time point RETTOP is not executed. The search help exit of the elementary search help is called at time point SELONE (at the moment). This search help exit should not do anything at this time point. Any preparatory work should be carried out at time point PRESEL1.
Steps for creating search help :
1. Run Transaction SE11
2. Give search help name
3. Click on Create
4. Make selection for Elementary or Collective search
 Help
For Elementary Search Help
5. Elementary search Help screen.
6. Give short description.
7. Dialog type specifies the data display in the hit
 list.
8. Give selection method
A] Search for database tables
B] Search for Views
9. Hot key specifies the letter or number displayed with every elementary search help.
10. Search help Exit: Specify the function module developed for the search of data for the elementary search help.
11. Search help parameter
A] Specify the input and output fields in the search help parameter column.
B] IMP column is input parameter for the search help.
C] EXP column is output parameter of the search help, to be displayed in the Hit list after selection.
D] LPos specifies the order in which fields are displayed in the hit list.
E] SPos specifies the order in which fields are displayed in the search help pop up screen.
F] Specify Data element in the field.
G] Specify the default value for any field required.
For Collective Search Help :
12. Search help exit: Specify the function module developed for the search of data for the elementary search help.
13. Search help parameter: Specify the import and export parameters.
14. Search help: Specify the elementary search help and the short text.
15. Parameter Assignment: Select the elementary search help and click on the parameter assignment. System proposes fields. User has to select the fields as per requirement, fields to be displayed in the output
hit list. Parameter assignment has to be done compulsorily for every elementary search help designed for the collective search help.
Please reward points if it helps.
Regards,
Amit Mishra

Help needed with configuring D-Link DSL-320T

My home network consists of 2 Aiport Express using WDS, 2 PowerBooks and a WiFi HP printer.
I recently had to replace my trusty Aztech DSL modem/router when it died, and bought a D-Link DSL-320T.
This is a DSL modem but NOT ROUTER with a built in DHCP server, but connection behaviour is different from my old device. The IP address for the modem is the default 192.168.1.1
When I connect the modem with an Ethernet cable to the Airport Express, run AirPort Admin Utility and set TCP/IP to configure using DHCP, the IP address of the AE becomes the fixed IP that my ISP has assigned to me, which starts 212.xxx.xxx.xxx. The router address is the same (212.xx.xxx.xxx), and the subnet is 255.255.255.255
With my old modem/router, the AE's IP address would be 192.168.1.2, and then I would use the AE as a wireless bridge, so that the modem would be the DHCP server. All connected Macs and printer would have a 192.168.1.xxx IP address.
With the new modem, I am unable to share the connection unless I use the AE to distribute IP addresses using NAT and DHCP. The AE uses the 10.0.1.xxx range of IP addresses. So my PowerBook has an IP of 10.0.1.xxx
I keep on having to restart the modem as the connection seems to drop on me, to the extent that I cannot even open the modem configuration page by entering 192.168.1.1 into Safari.
My suspicion is that having 2 DHCP servers on the go is not helpful, trying to be on a 192.168.1.x range of addresses as well 10.0.1.x.
I'm not really sure what purpose the modem's DHCP server has, because it does not seem to distribute 192.168.1.x IP addresses, if I configure the AE to be a wireless bridge. As I have said, it is not a modem/router but a modem only. I cannot set up any port forwarding (NAT) instructions. The D-Link manual and website are not very helpful, but it does appear that the correct behavior is for the connected device to display the public (i.e. 212.xxx.xxx.xxx) address. The website does also state that I would need to have separate router to do NAT. I thought that is where the AE comes in...
However if I disable the modem's DHCP server I am not sure what manual settings to configure the AE with.
Any help much appreciated!
Min Yu
AirPort Express. Base Station V6.3 Mac OS X (10.4.8) PowerBook G4

The IP address for the modem is the default
192.168.1.1... The router address is the same
(212.xx.xxx.xxx)...
This is confusing. Which IP address does your D-Link
use?
The D-Link uses the IP address 192.168.1.1
Whatever device is plugged into the D-Link, whether PowerBook directly or the AirPort Express, configured using DHCP you get the following in TCP/IP:
IP address: 212.xxx.xxx.xxx
Subnet Mask: 255.255.255.255
Router: 212.xxx.xxx.xxx (identical numbers to IP address)
DNS servers: as per ISP
My
suspicion is that having 2 DHCP servers on the go is
not helpful, trying to be on a 192.168.1.x range of
addresses as well 10.0.1.x.
There is no inherent problem using 2 DHCP servers.
If I can have both devices acting as DHCP servers, then maybe there is a different explanation for why I lose connection all the time which is only cured by turning the modem on and off again?
Min Yu

Urgent help needed in configuring X1151A for RAC cluster

for RAC requirements I have to configure this card to use the interface name of ce1 but I have tried changing slots and puting /etc/hostname.ce1 file out there but it fails .. it always comes up as ce0.
my question is : How can I cofigure this card to come up as ce1 ? in the other box I had to do nothing .. i just placed the /etc/hostname.ce1 file with hostname and it works perfect.
can you please email me a copy of your response at [email protected] ?
thanks
Sami

Look for "ce" instances in the /etc/path_to_inst file. You'll need to change the lines so that the hardware path you want is "1".
Keep a backup and write down the pathname. You can give that path to a 'boot -a' prompt if anything bad happens.
Darren

Urgent help needed in configuring X1151A

for RAC requirements I have to configure this card to use the interface name of ce1 but I have tried changing slots and puting /etc/hostname.ce1 file out there but it fails .. it always comes up as ce0.
my question is : How can I cofigure this card to come up as ce1 ? in the other box I had to do nothing .. i just placed the /etc/hostname.ce1 file with hostname and it works perfect.
can you please email me a copy of your response at [email protected] ?
thanks
Sami

For the discussion in this forum thread, the path-to-inst file
can be though of as a repository of every device path
for every lump of hardware that was ever installed to a system.
It tells Solaris where to find the devices, along their communication interconnect paths.
Thus a device driver can know where to sends its commands
and where to listen for any return signalling responses from the device.
Issues can arise if a device was successfully installed to a path,
such as when a PCI card is installed to a particular slot,
and that card gets moved to another slot.
The path-to-inst file will "remember" the old path, in case you return the card.
No software structures need to be re-built when it reappears in its old slot position.
The former functionality is maintained if ever needed again.
The new position initiates a new entry into the file,
such as when there are two of the same cards instead of the original solitary card.
For your circumstances, there's got to be something in the computer's configuration
that can isolate the data streaming to IP address #1 ( such as for ce0 )
from whatever data might need to go through the other IP address ( such as for ce1 ).
My suggestion for you is to use the devfsadm command.
Review its man pages.
Decide how you want the computers to be configured -- probably using ce0 on both.
devfsadm -C will purge out stale entries and rebuild the path-to-inst file.
A reconfiguration reboot, such as might result from a boot -r,
only appends new device instances to the file.
There's no cleanup, or 'housekeeping', done to it.

Help needed in configuring AirPort Express for Warcraft!

Will someone talk me through how to configure my AirPort Express so that I am able to play Warcraft? The downloader is telling me that I'm behind a firewall, however I have configured my Firewalls on my computer to allow Warcraft, and it's still not really working.
I'm not the most tech-savvy, any help would be greatly appreciated.

Thank you Duane and others.
This is a very interesting discussion group with a lot of AX users having problems for one reason or another. The main frustration is with, at least for me, the intermittent functionality. As opposed to my wireless laptop, which connects with the network each and every time I turn it on, the AX is good about 75% of the time. And in turn, if iTunes or the Airport Utility can't see the AX there's absolutely nothing you can do to get it to, short of rebooting the laptop, restarting iTunes, etc.
My next plan is to move AX rather close to the wireless router to ascertain if signal strength is the issue.
And I have 'one' last question, are there people out there that have 100% success all the time using AX, especially for streaming iTunes?
Thanks again.

Desperate help needed to configure WVC210 for remote access?

Hi, I'm new and desperately need some help on setting up my WVC210 for remote access.
I manage to setup and see images from my WVC210 using my home LAN via both wired and also wireless.
I have 2 questions:
(a) for wireless connection, i only manage to get connection to my WVC210 if i disable the wireless security from my router. But that means i'm opening my wireless LAN to everyone. How can i still get connection to the camera if i enable the wireless security from my router. (FYI: my router is 2Wire ADSL from Singnet Mio)
(b) how can i get connection to my WVC210 from outside or in my office? I type in the camera Fixed IP address (displayed on the front screen) on the web browser, by it shows a error page. Is there some setting that i might need to adjust ?
Pls kindly help me
Thank you.

Bernard,
For Item (2) is there any difference between the camera built-in dyndns updater versus the software updater? I am under the impression that the software updater is easier to manage.
The biggest difference for you is that the camera always stays at the same location, and the laptop goes with you. Every time you access the internet from a different location with the laptop the software updater is sending the new IP address to dyndns.com. This causes you to lose access to your camera because the FQDN doesn't point to your home IP address anymore. Once the dyndns credentials are in the camera (or router) there is no management needed. The device will automatically update dyndns.com with your new IP address as it changes, and you do not need to do anything.
For Item (3), are you saying port forward 1025 is it for the 2nd camera only or for both? Or is it 2nd camera use 1025 and first camera use 8080?
Here's an example of what I mean:
Camera 1: 192.168.1.210 port 1024. In router, forward port 1024 to 192.168.1.210
Local Access: http://192.168.1.210:1024
Remote Access: http://bernards210.dyndns.org:1024 (Example)
Camera 2: 192.168.1.211 port 1025. In router, forward port 1025 to 192.168.1.211
Local Access: http://192.168.1.211:1025
Remote Access: http://bernards210.dyndns.org:1025 (Example)
Camera 3: 192.168.1.212 port 1026. In router, forward port 1026 to 192.168.1.212
Local Access: http://192.168.1.212:1026
Remote Access: http://bernards210.dyndns.org:1026 (Example)
to access the 2 camera outside, do i have to have another dyndns host name or can i use the current one for both camera?
As you can see in the above example, the dyndns name remains the same for remote access to all three cameras. The only change is the port number at the end. Your router will translate the port number to the IP address that the port is forwarded to, allowing you to select the camera that you wish to view by changing the port number in the address.
I was actually thinking that the camera web browser can show 2 camera at the same time. Is it possible?
No. Each browser window will display a single camera. You can however opens multiple instances of your browser to allow viewing of more than one camera simultaneously. A better solution is to install the Video Monitoring Software that is included with the camera which allows you to view multiple cameras in the same window.

Urgent help need on configuring MPLS TE

i found that CSPF is not finding other path still there is no bandwith on SPF path and tunnel1 remain down if i down second tunne2 then tunnel 1 comes up not try to use other interfaces which r free with enough bandwidth. all router have MPLS TE and RSVP.
please read all in detail below
my freinds i have one Q. for MPLS TE. i m using 3660 router for MPLS TE on dayanagen simulater. in this lab there is 5 routers with 512 kbp RSVP on each interface all router with MPLS TE. configure are as->
R1 /0 ---R2 /0
R2 ==== R3 have Two interfaces s1/1 and s1/3
R2 /2-----R5 /2 interface connection
R3 ---- R5 int connection
R3 ---- R4 tunnel to R4 from R1,R2 with 300kb each
tunnel1 on R1 to R4 with 300kb rsvp TE
tunnel2 on R1 to R3 with 50kb rsvp TE
tunnel1 on R2 to R4 with 300kb rsvp TE
diagram like that below (ignore ..dots)
R1---R2=====R3----R4
.......I_______I
..........R5
i created tunnels from R1----> R4 with 300Kb.
second R1---->R5 with 50Kbp tunnel
and
on R2---->R4 tunnel with 300kbp.
PROBLEM IS when R1 tunnel go via R2 to R4 it takes s1/1 interface with 300rsvp. means for R2 tunnel should find next interface for same destination R4 becaused there is not enough space.On one of remaining on interfaces on R2 s1/3 or S1/2 but R2-->R4 tunnel remain down. when i down R1---R4 tunnel R2--R4 tunnel comes up on same interface. NOW when i up R2 tunnel first and later R1. then same thing again R1 down and wait for R2 tunnel to go down.then up on same interface. if u see there is still two path r free to go R4 on R2
1. R2 s1/3 ----> s1/3 of R3
2. R2 s1/2 ---->s1/2 of R5 with both 512 kb RSVP
there is using R2 s1/1 for tunnel
why not with help of CSPF it takes other path when 512 link is also free on R2 router to same destination??? its on dyanamips is it can problem with simulater.
it means that on R2 using SPF path for R4 for both tunnel and not trying to find other CSPF path thats why my two interfaces are free with 512kbp RSVP on same router R2. why not CSPF using other remaining path. and down one of tunnel because of there is no space on tht s1/1 interface........
PLZZ ANSER ME I NEVA USE MPLS TE B4
thanks in advance!

sorry m8 for late reply i had sort the problem. it occur because i was using 4 router now when i used TE with 12 router on daynagen it is working fine.
Question
now i have one question. i am trying to use TE with MPLS VPN site to site. as you know site to site MPLS VPN send traffic both way from R1 to R2 and R2 to R1.
but if i create MPLS TE tunnel1 on R1 to destination R2 then all traffic from R1 will go via tunnel1. but traffic from R2 wil go to R1 via normal route becasue tunnels is one way onli can see on R1
that means i have to create tunnels at both end in opposite directions. please reply me.
MPLS VPN site to site between R1 --- R2 have to create tunnels for both direction because tunnel work in on way?
R1 ---->R2 tunnel1
R1<-----R2 tunnel2
thanks

Help needed to configure WVC54GC cam with BEFW11S4 router:

OK...I have to admit that I'm finally having to ask for help! I'm handy with most computer problems, but i.p. addresses, port forwarding and dns stuff is kinda over my head. I need someone to walk me through the steps. I've got the camera setup to the point that I can view the image in the Linksys setup, but I want to be able to share it on the net. I'm stumped with how to do this. I'm told I need to forward ports on my router etc. I've been into the router settings and there is no "gaming tab" as is suggested, but I can find port settings under advanced, although they look different.
I've also setup an account with DynDNS updater,as I'm told I'll need this to maintain a connection. The settings in there are equally as daunting, so any help here would also be beer worthy....LOL!
Any help would be MUCH appreciated!
Cheers!

Once you login to your Router setup Page.... on the Very Right Side you need to click on the Advance Tab and then you need to click on the Forwarding Tab and Below you can Open the Ports for your Camera.

Help needed to configure 2730 classic on AT&T

I've been speaking to Nokia and AT&T for two days trying to see if they could help me configure the new 2730 classic (bought in Asia) to work. It's on S40 and uses GSM data and packet data.
No configuration I could find via public forums has worked so far.
One AT&T agent said that since GPRS is not available on the 2730, they can't help me manually put it in. But Nokia agent said AT&T should be able to send GPRS settings to me by sms (while another AT&T agent kept saying that since it's not a AT&T phone, they can't help me).
In Malaysia, I'd buy a sim card for less than US$5, and wap and mms settings are sent to me within the hour of putting in the sim card, why is it so difficult to do the same in this country??
Is "global connectivity" a myth? Is this a conspiracy to make people a buy new phone wherever they move? Or is there some truth to the fact that the 2730 is just not compatible with the system in the US?

Back in Nov 2009 when I posted the original message, I called AT&T multiple times with the hope that someone there would bend the official policy and help me figure it out (since the phone was not bought from AT&T).
I ended up finding this:
http://www.configuremyphone.com/
Their customer service was stellar and it cost very little. They sent me the necessary configurations so I could get on the internet. I don't have 3G still, but at least I could check my email 95% of the time that I tried.
The bad news is, looks like "Configure my Phone" is no longer available. But maybe the parent company has other ways to helping consumers?
Honestly... for the technie entrepreneurs out there, someone could start making money out of breaking down these walls that American phone companies impose on us. These companies pay lip service to global connectivity -- which only translates to consumer brand loyalty.

Help Needed to configure sites on IIS CFMX 6.1 in distributed mode

I have a distributed connection between my IIS 4.0 and CFMX 6.1 STANDALONE server.
I need add additional web sites. The default site root is at c:/wwwroot/inetpub
The new site is at c:/wwwroot/iweb1_psms
The new site is created on IIS, including virtual dir JRunScripts which point to the root\runtime\lib\wsconfig\2 folder.
default site is \1, so new site is \2,
I'm not sure what belongs in the wsconfig.properties file. ?
Can anyone provide a sample of this file using multiple sites on CFMX 6.1 Standalone server?
Thanks,

I found a fix for my wsconfig error and now I can use the wsconfig tool but I still can't get my sites to be recognized.
if I do a command line list:
C:\CFusionMX\runtime\bin>wsconfig -list
Internet Information Server (IIS) :
There are 2 configured sites and 0 unconfigured sites.
Configured Site Number and Site Name:
0 All
1 Default Web Site
If I try to create the connection for a web site named iweb1_psms with an IP 192.168.251.90 (that's a valid IIS web site on the IIS server)
C:\CFusionMX\runtime\bin>wsconfig -server iweb1 -ws iis -site "192.168.251.90" -
coldfusion -v
Created file C:\CFusionMX\runtime\lib\wsconfig\jrunwin32.dll
IIS web site 192.168.251.90 does not exist
I've found out from my network guys that the web server name iweb has the same IP as the default web site. I don't know if that is standard practice or not. My question is how do you folks that run multiple websites with CFMX 6.1 set them up? What is the physical location of the files?
Thanks, Jim

Help needed to configure H-REAP with local switching

Hi All,
We are using following devices for campus Wi-fi.
1. WLC - 4402
2. AP (1131ag, 1042n) which support H-REAP.
I want to configure HREAP central auth and local switching. I have enabled from local to HREAP after that I go to HREAP tab and native vlan 1 (by default)(I have changed native vlan 1 to 51.) vlan support is enabled. then click on vlan mapping and my wlan (guestwlan) is there with vlan id 24.
I have assigned static IP to AP (192.168.51.40/24 gw 192.168.51.254).
DHCP is running on controller.
switch port configure is below:
interface FastEthernet0/18
description WiFi access point
switchport trunk native vlan 51
switchport mode trunk
no ip address
end
Issue : authentication done through RADIUS (Cisco ACS 4.2) but no getting IP address from DHCP.
Please help.
Thanks in Adv.
Thanks,
AS

Hi AS,
Do not use the DHCP on the WLC.
Use a DHCP on the neighbor swtich if possible for the native VLAN.
Regards,
Amjad
Rating useful replies is more useful than saying "Thank you"

Help needed in configuring ADS

Similar Messages

Maybe you are looking for