Help Needed in developing simple Chatting application using flex and blazeds
Hi,
I followed this tutorial from adobe http://learn.adobe.com/wiki/display/Flex/Creating+a+BlazeDS+messaging+application+in+Flex+ Builder i installed tomcat server and set the path.I am unable to open server like this http://localhost:8080 but i can able to open that in this way http://127.0.0.1:8080/ .... When i create my new flex project in flash builder 4 i am getting this error
You do not have write permission for the project output folder. Specify another location.
can any one help me in how to get rid of this problem.I hope this forum helps me in finishing my flex project..
Thanks
Trinethra
Hi,
Need to use a scrollable resultset and depending on the need to have a stateful connection or a stateless connection you may need to query the table for every request(for stateless connection) and use the same result set for(stateful connection). and depending on the no of records in a page and the page no do some simple arithmetic and move the resultset. Hope this helps.
rajesh
Similar Messages
-
How do i develop a chat application using jms over web based
I want to develop a chat application using jms with mailing,file transfer and audio facilities
can anyone help me to how to go abt thatThere is a good article from Sun on a simple example of what you want - it could serve as a basis for you.
http://developer.java.sun.com/developer/technicalArticles/peer/ -
How to upload images to server using flex and blazeDS
Hi All,
Could you some help me, regarding uploading two images while click on the upload button. i am have two browse buttons and two upload buttons. i am able to select the image, while click on the browse button. but i am unable to upload the image, while click on the upload button. like this, i have to do in my application.
if some help me i will appreciate , its very urgent.
Thanks
venkatWhen uploading a file, I use a byte array as a temporary buffer..
So, you should then be able to store the byte array in the
database as binary data.
example>
//Temporary Buffer To Store File
byte[] tmpbuffer = new byte[860];
//Some Code To Upload File...
//File Should Now Be In Byte Array
//Get DB Connection and execute Prepared Statement
Connection con=//GET DB CONNECTION;
String sql=insert into TABLE(page) values(?);
PreparedStatement ps=con.prepareStatement(sql);
ps.setBytes(1,tempbuffer);
ps.executeUpdate();
//Close PS and Free DB Connection
..... and this method looks like you dont even have
to store the file in a byte array, you can just give
it the input stream.
ps.setBinaryStream(int, inputStream, int);
You may have to make several attempts at this. I have
uploaded a file and temporarily stored it in a byte array,
but have never from there stored it in the DB as binary
data.. but this looks like it'll work.
Good Luck! -
Building a best practice web application using ColdFusion and Jave EE
I've been tasked with rewriting a software using ColdFusion. I cannot seem to find a lot of information on best practice development in ColdFusion. I am an experience Java developer who has never used ColdFusion before. I want to build this application using a synergy of ColdFusion and Java EE technologies. Can someone recommend me a book that outlines how to developer in ColdFusion? Ideally this book assumes the reader is an experienced developer with no exposure to ColdFusion. Ideally the methods outlined in the book are still "best practice" methods.
jaisheela wrote:
Hello Friends,
I am also in the same situation.
I am a building a new web application using JSF and AJAX.
Requirement is I need to use IBM version of DOJO and JSF but I need to develop the whole application using Eclipse 3.3,2 and Tomcat 5.5.
With IBM version of DOJO and JSF, will Eclipse and Tomcat help to speed up the development or do you suggest me to go for Rational Application Developer and WebSphere Application Server.
If I need to go with RAD and WAS, then I am new to RAD and WAS, is it easy to use RAD and WAS for this kind of application and implement web applicaiton fast.
Any feedback will be great help.Those don't sound like requirements of the system to me. They sound more like someone wants to improve their CV/resume
From what I've read recently, if it's just fast you want, look at Ruby on Rails -
Buling a new Web Application using JSF and Ajax.
Hello Group,
I am a building a new web application using JSF and AJAX. Planning to use Myfaces Tomahawk, Dojo for Ajax, Hibernate, Spring,Eclipse IDE and Jetty Server.Can some one please suggest me will this be a right one for
building complex UI and will it support for using the jsf features and would like to know any other free open
source framework, ide, tools which support the best way for an agile project..?. There is restriction like i have to use java1.4jaisheela wrote:
Hello Friends,
I am also in the same situation.
I am a building a new web application using JSF and AJAX.
Requirement is I need to use IBM version of DOJO and JSF but I need to develop the whole application using Eclipse 3.3,2 and Tomcat 5.5.
With IBM version of DOJO and JSF, will Eclipse and Tomcat help to speed up the development or do you suggest me to go for Rational Application Developer and WebSphere Application Server.
If I need to go with RAD and WAS, then I am new to RAD and WAS, is it easy to use RAD and WAS for this kind of application and implement web applicaiton fast.
Any feedback will be great help.Those don't sound like requirements of the system to me. They sound more like someone wants to improve their CV/resume
From what I've read recently, if it's just fast you want, look at Ruby on Rails -
Need help regarding develpment of a chat application in java
hi
well, i would like to know what is the best and simple technolgy to develop a simple chat application. I was searching this on internet and found some using servlets and JSP's, applets, RMI etc. I dont know exactly which to use. Infact iam new to java and if someone can help me out with this, i can start reading the specific technology.
Thanks in advance.
ravi.follow this tutorial and you might get some clues: http://java.sun.com/docs/books/tutorial/networking/sockets/index.html
-
Doubts over the Performance in Developing a Chat application
We are developing a chat application which needs to update the chat content in the database for the duration of the chat (ie.,For the duration of a session).At the same time the page should refresh and show the current content on both ends.In addition to both these, the database tables has to be checked to detect the occurence of a Network error on both sides.
We have developed it as a Browser based chat and we have used PHP with MySQL. The performance is slow.
Can anyone give a suggestion as to whether we can develop the chat application completely from the scratch and if we do that which technology should we choose to boost the performance.
If anyone is not clear about my problem just mail me.I'll explain it in more detail.
Thanks in AdvanceHi,
I just wanted to know these following answers.
2) Network failure -- Means (either browswer got killed or data did not arrived/Page Not refreshed)
3) which WebSErver are U using?
From java, it is very easy to develop chatting application for which you can use applet and servlets for the same (if you consider the performance is the utmost importance)
Updating to the database should not be done for the duration levels rather should be done at the event levels(data change/keyboards/session -inf changes).
Im not sure about PHPs running at client but I can suggest you to use two frames .One is for typing and other one is for displaying information which basically gets the staus from the server abt other users in the chat either from the session, which would be driven by other component which is static) .
Any how, I just put my ideas (Im sure , you know all these things)
with regards
Lokesh T.c -
Developing server-side applications using dreamweaver
We are having issues developing server-side applications using dreamweaver for our client's website www.uuee.org.. They are building oracle database driven worldwide directory for Egyptian expatriates. Any help is highly appreciated.
You made 3 statements. What is the question? What do you need help with?
-
How can I develop a web application using EJB design pattern?
I have searched over the web and found quite a lot of tutorials on how to use the EJB design pattern.
I know that there will be a home interface, EJB object interface and a SessionBean.
But the tutorials often only cover a single class, this made me unable to get a complete picture of how EJB design pattern can be implemented into a whole system.
I am now required to devleop an online shopping web application using EJB and JSP page.
I think I will need to create a lot of classes: Member, ShoppingCart, Product...etc.
What I want to ask is that, do I need to create a home interface, EJB object interface and a SessionBean for each of these classes?
I really need some ideas on how to develop this system using EJB + JSP pages.
Many thanks to you all.For every EJB that you want to create, you will need to code a home and remote interface and a bean class.
You could start getting your ideas here
http://www.theserverside.com/books/wiley/masteringEJB/
http://www.coreservlets.com -
== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
Hi,
I developed a web application using HTML5-Offline Application Cache mechanism. Inspite of deleting the cache as mentioned in the above steps, Firefox still maintains a copy of the page in it's cache. Also, a serious bug is, even though we delete all temp files used by Firefox, and open the previously cached page, it displays it correctly, but upon refreshing/reloading it again shows the previous version of the page maintained in the cache.
== Troubleshooting information
==
HTML5: Application Caching
.style1 {
font-family: Consolas;
font-size: small;
text-align: left;
margin-left: 80px;
function onCacheChecking(e)
printOutput("CHECKINGContents of the manifest are being checked.", 0);
function onCacheCached(e) {
printOutput("CACHEDAll the resources mentioned in the manifest have been downloaded", 0);
function onCacheNoUpdate(e)
printOutput("NOUPDATEManifest file has not been changed. No updates took place.", 0);
function onCacheUpdateReady(e)
printOutput("UPDATEREADYChanges have been made to manifest file, and were downloaded.", 0);
function onCacheError(e) {
printOutput("ERRORAn error occured while trying to process manifest file.", 0);
function onCacheObselete(e)
printOutput("OBSOLETEEither the manifest file has been deleted or renamed at the source", 0);
function onCacheDownloading(e) {
printOutput("DOWNLOADINGDownloading resources into local cache.", 0);
function onCacheProgress(e) {
printOutput("PROGRESSDownload in process.", 0);
function printOutput(statusMessages, howToTell)
* Outputs information about an event with its description
* @param statusMessages The message string to be displayed that describes the event
* @param howToTell Specifies if the output is to be written onto document(0) or alert(1) or both(2)
try {
if (howToTell == 2) {
document.getElementById("stat").innerHTML += statusMessages;
window.alert(statusMessages);
else if (howToTell == 0) {
document.getElementById("stat").innerHTML += statusMessages;
else if (howToTell == 1) {
window.alert(statusMessages);
catch (IOExceptionOutput) {
window.alert(IOExceptionOutput);
function initiateCaching()
var ONLY_DOC = 0;
var ONLY_ALERT = 1;
var BOTH_DOC_ALERT = 2;
try
if (window.applicationCache)
var appcache = window.applicationCache;
printOutput("BROWSER COMPATIBILITYSUCCESS!! AppCache works on this browser.", 0);
appcache.addEventListener('checking', onCacheChecking, false);
appcache.addEventListener('cached', onCacheCached, false);
appcache.addEventListener('noupdate', onCacheNoUpdate, false);
appcache.addEventListener('downloading', onCacheDownloading, false);
appcache.addEventListener('progress', onCacheProgress, false);
appcache.addEventListener('updateready', onCacheUpdateReady, false);
appcache.addEventListener('error', onCacheError, false);
appcache.addEventListener('obsolete', onCacheObselete, false);
else
document.getElementById("stat").innerHTML = "Failure! I cant work.";
catch (UnknownError)
window.alert('Internet Explorer does not support Application Caching yet.\nPlease run me on Safari or Firefox browsers\n\n');
stat.innerHTML = "Failure! I cant work.";
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729; .NET4.0E)
== Plugins installed
==
*-Shockwave Flash 10.0 r45
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Google Update
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object
Thanks & Regards,
Kandarpa Chandrasekhar Omkar
Software Engineer
Wipro Technologies
Bangalore.
[email protected]
[email protected]We have had this issue many, many times before including on the latest 3.6 rev. It appears that when the applicationCache has an update triggered by a new manifest file, the browser may still use only its local network cache to check for updates to the files in the manifest, instead of forcing an HTTP request and revalidating both the browser cache and the applicationCache versions of the cached file (seems there is more than one). I have to assume this is a browser bug, as one should not have to frig with server Cache-Control headers and such to get this to work as expected (and even then it still doesn't sometimes).
The only thing that seems to fix the problem is setting network.http.use-cache to false (default is true) in about:config . This helps my case because we only ever run offline (applicationCache driven) apps in the affected browser (our managed mobile apps platform), but it will otherwise slow down your browser experience considerably. -
Help needed Displaying ALV Secondary list without using oops concept
Hi Experts
Help needed Displaying ALV Secondary list without using oops concept.
its urgent
regds
rajasekharhi chk this code
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*& Form validate
text
--> p1 text
<-- p2 text
FORM VALIDATE .
SELECT SINGLE VBELN
FROM VBAP
INTO V_VBELN
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM. " validate
*& Form get_details
text
--> p1 text
<-- p2 text
FORM GET_DETAILS .
SELECT VBELN
POSNR
MATNR
FROM VBAP
INTO TABLE IT_VBAP
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM. " get_details
*& Form fieldcat
text
--> p1 text
<-- p2 text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. " fieldcat
*& Form LAYOUT
text
--> p1 text
<-- p2 text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM. " LAYOUT
*& Form VARIANT
text
--> p1 text
<-- p2 text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM. " VARIANT
*& Form SAVE
text
--> p1 text
<-- p2 text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM. " SAVE
*& Form EVENTS
text
--> p1 text
<-- p2 text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM. "TOP_OF_PAGE
*& Form ALV_DISPLAY
text
--> p1 text
<-- p2 text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = PF_STATUS
I_CALLBACK_USER_COMMAND = USER_COMMAND
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = G_SAVE
IS_VARIANT = G_VARIANT
IT_EVENTS = G_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBAP
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " ALV_DISPLAY
*& Form SET_PF_STATUS
text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z50651_PFSTATUS' EXCLUDING EXTAB.
ENDFORM. "SET_PF_STATUS
*& Form SET_USER_COMMAND
text
FORM SET_USER_COMMAND USING R_UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'DC'.
READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
IF SY-SUBRC = 0.
SELECT SINGLE MTART
FROM MARA
INTO V_MTART
WHERE MATNR = IT_VBAP-MATNR.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
ELSE.
WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
WRITE :/ 'MATERIAL TYPE :' , V_MTART.
ENDIF.
ENDIF.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'CLOSE'.
CALL TRANSACTION 'SE38'.
ENDCASE.
REPORT Z_ALV_INTERACTIVE MESSAGE-ID ZMSG_50651
LINE-SIZE 100
LINE-COUNT 60
NO STANDARD PAGE HEADING.
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*& Form validate
text
--> p1 text
<-- p2 text
FORM VALIDATE .
SELECT SINGLE VBELN
FROM VBAP
INTO V_VBELN
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM. " validate
*& Form get_details
text
--> p1 text
<-- p2 text
FORM GET_DETAILS .
SELECT VBELN
POSNR
MATNR
FROM VBAP
INTO TABLE IT_VBAP
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM. " get_details
*& Form fieldcat
text
--> p1 text
<-- p2 text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. " fieldcat
*& Form LAYOUT
text
--> p1 text
<-- p2 text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM. " LAYOUT
*& Form VARIANT
text
--> p1 text
<-- p2 text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM. " VARIANT
*& Form SAVE
text
--> p1 text
<-- p2 text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM. " SAVE
*& Form EVENTS
text
--> p1 text
<-- p2 text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM. "TOP_OF_PAGE
*& Form ALV_DISPLAY
text
--> p1 text
<-- p2 text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = PF_STATUS
I_CALLBACK_USER_COMMAND = USER_COMMAND
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = G_SAVE
IS_VARIANT = G_VARIANT
IT_EVENTS = G_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBAP
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " ALV_DISPLAY
*& Form SET_PF_STATUS
text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD' EXCLUDING EXTAB.
ENDFORM. "SET_PF_STATUS
*& Form SET_USER_COMMAND
text
FORM SET_USER_COMMAND USING R_UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'DC'.
READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
IF SY-SUBRC = 0.
SELECT SINGLE MTART
FROM MARA
INTO V_MTART
WHERE MATNR = IT_VBAP-MATNR.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
ELSE.
WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
WRITE :/ 'MATERIAL TYPE :' , V_MTART.
SUBMIT SLIS_DUMMY WITH P_MATNR EQ IT_VBAP-MATNR
WITH P_MTART EQ V_MTART.
ENDIF.
ENDIF.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'CLOSE'.
CALL TRANSACTION 'SE38'.
ENDCASE.
plz reward if useful -
We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?
The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc. -
Problem in creating client side PDF with image using flex and AlivePD
I need a favor I am creating client side PDF with image using flex and AlivePDF for a web based application. Images have been generated on that pdf but it is creating problem for large size images as half of the image disappeared from that pdf.I am taking the image inside a canvas . How do i control my images so that they come fit on that pdf file for any image size that i take.
Thanks in advance
AtishayI am having a similar and more serious problem. It takes a
long time to execute, but even attaching a small image balloons the
pdf to 6MB plus. After a few images it gets up to 20MB. These are
100k jpeg files being attached. The resulting PDF is too large to
email or process effectively. Does anyone know how to reduce
size/processing? -
How do I save a file to a server using flex and coldfusion?
How do I save a file to a server using flex and coldfusion?
On the CF side I might need to use this:
<cffile action="UPLOAD" filefield="Filedata"
destination="#expandpath('..\somepath)#"
nameconflict="overwrite">
And on the flex side I might need to use something like this:
var sendVars:URLVariables = new URLVariables();
sendVars.action = "upload";
var request:URLRequest = new URLRequest();
request.data = sendVars;
request.url = _strUploadScript;
request.method = URLRequestMethod.POST;
_refUploadFile = new FileReference();
_refUploadFile = _arrUploadFiles[_numCurrentUpload].data;
_refUploadFile.addEventListener(ProgressEvent.PROGRESS,
onUploadProgress);
_refUploadFile.addEventListener(Event.COMPLETE,
onUploadComplete);
_refUploadFile.addEventListener(IOErrorEvent.IO_ERROR,
onUploadIoError);
_refUploadFile.addEventListener(SecurityErrorEvent.SECURITY_ERROR,
onUploadSecurityError);
_refUploadFile.upload(request, "file", false);
I just don't know how to put it all together in Coldfusion.try this...
http://cf-creations.co.uk/blog/index.cfm/2008/9/20/Flex--File-Upload-Form--Part-One--Build ing-The-Initial-Form -
Problem in audio conferencing using Flex and FMS3.0
Hi Everyone,
I am trying to achieve audio conferencing using Flex and
FMS3.0
Currently I am following an approach where all the persons in
voice conference publish their voice on flash media server using
NetStream.Publish() function and all persons listen to the streams
published by all other members in the conference using
NetStream.Play() function. I am using a shared array on server side
to keep track of all the persons present in the conference. The
problem I am facing is that sometimes all the persons are able to
hear the voice of each other but other times audio of some persons
is not audible to others. Even if voice comes then there is echo
and one can hear the sound 3-4 times depending on the amplitude of
the sound. I have also used Microphone.setUseEchoSuppression(true)
to suppress the echo but it is not effectively suppressing it. If
someone has faced similar problems in past please let me know the
solution. Thanks in advance.
Regards,
PankajI know.. but it was wrapped as jar or war files..
I searched all over my harddrive to find something named like org.apache or jdbc.clientDriver...and so on..with no result.
and I unziped derby.jar or derbyclient.jar etc.. also with no result.
It's like the driver has hiden somewhere like viruses...at least to me..
Edited by: dewyone on Dec 25, 2007 1:48 PM
Maybe you are looking for
-
Iturns encounters an error and must close during transfer to ipod
Ok it's way late for me but I've been messing with this for the past 41/2 hours. I just want my music I had my motherboard replaced. Got the computer back and it removed my downloaded songs. Finally figured out how to get approval back after it reque
-
I can't connect my iPhone to my Mac, please help!!!
when I connect my iphone to my Macbook Pro, it says "itunes could not connect to this iphone. could not establish a secure connection to the device" on itunes....any idea what's going on?
-
Why Can't I log in to the I-Tunes store it has always worked in the past? It gives me an error then closes I-Tunes Thanks
-
What kinds of graphics do you convert to PDF, and why?
I work on new ideas for Document Services. Many people convert graphics to PDF, and we'd like to know more. What kinds of graphics do you convert to PDF? And why? Are there features we could add to Create PDF that would be useful to you? Please let u
-
Safari Universal can't access my passwords unless it's running in Rosetta
I just got a new iMac Core Duo yesterday and I've run into this frustrating problem. Thankfully I've narrowed down the issue and found a workaround, but needless to say I would much rather use Safari natively! When it's running in Intel mode, it does