Help needed  in Table and field

Hi all,
can any one tell me the table and field to get basic unit of measure and unit of issue.
I guess both are different.
Thanks

For base unit of measure, uom, T006 is the main table.But whereever you have a quantity yu will find UOM in that table. The field is MEINS.
when you say unit of issue, you mean actual unit of measure right?
In that case it again depends on what you are looking at. Example
in table LIPS there is base UOM and Actual UOM.
base is always "MEINS" and actual is "LFIMG" in this case.
So get the table in your functional area and check for the actual uom field in SE11.
Regards
Message was edited by:
        Sandeep Bhavsar

Similar Messages

  • Need the table and field names...

    Hi
    Is there any field for min order quantity and lead time in vendor master related tables ? I want to generate a report to show that this vendor expects a min order quantity of this much and his delivery will take a minimum of n days/weeks etc ? So that based on that i can always be prepared for the delivery as well decide on the minimum qty to be ordered.
    In which table are these data stored and which fields refer them ?
    thanks

    Hi,
    Check the table LFM1(Vendor master record purchasing organization data).
    The default delivery time is stored in the field PLIFZ (Planned delivery time in days).
    There is no quantity field as such in vendor related information stored, its determined by the order placed by the vendor and the field VENSL(Vendor service level) stored in the LFM1 table.
    Hope this helps.
    Edited by: Priyabrata Samanta on Feb 15, 2008 2:58 AM

  • Help me with table and fields in SD

    Hi gurus,
               please find me these tables fields.
    Sales Document Number
                   Req Delivery Date
                   Delivery Order Document
                   Billing Document Number
                   Billing Date
                   Gross Sales
                   Pallets Discount
                   Trade Discount
                   Commission Fees
                   Royalty Fees
                   Management Fees
    each answer will b fully rewarded.
    thanks

    Hi,
    Sales Document Number - VBAK-VBELN
    Req Delivery Date - VBAK-VDATU
    Delivery Order Document - LIKP-VBELN
    Billing Document Number - VBRK-VBELN
    Billing Date - VBRK-FKDAT
    Regards,
    Himanshu

  • Table and field for the given object

    Hi all,
    We are developing a report , i need following table and fields. Could you please help me on this?
    Supplier
    No of approval required
    Approval status
    Approval pending with
    In approval since
    Thanks in advance , will appriciate any input
    Hareesha

    Hi  ,
    Still am not able to find out the FM/ table whom its pending for approval (shopping cart). Could you please help me on this?
    (E.g: Shopping cart got created and having 7 levels of approval (Manager1, 2, 3,4,5,6 and 7),let us say First 2 manageru2019s approved, 3rd manager has to approve the Shopping cart, we need to pull these information of pending with 3rd manager in our Z-report )
    Thanks in advance
    Harish

  • Asset accounting Tables and Fields.

    Hi Experts,
    I need some table and field in asset accounting, my requirement is below.
    1) 2009 depreciation expense for all assets still in service (not written off during 2009) (by class, by asset); and
    2) 2009 depreciation expense on all assets written off during the year (by class, by asset)
    Thanks in advance.
    REgards,
    Sam.

    Hi Sam,
    I think in ANLC you find what you need.
    If not, give me feedback
    regards Bernhard

  • Which tables and field I need?

    Hi all,
    I am new to BW. Can someone tell me which tables and fields I need if I load data (sales report;t code:MCTG; s001)from R3 to BW. Which extractor do I need in LBWE or SWIB?
    I may need to answer as soon as possible. Any hlep will be appreciate. Thank you.
    Koala

    Hi Koala,
    LBWE is a tcode for Logistics Cockpit extraction. It's a direct code. You can find it also in tcode SBIW expanding nodes.
    Knowing the fields that show up in your report you can compare them with queries, cubes, infosources and datasources in a business content.
    Just make a little research:
    http://help.sap.com/saphelp_nw04/helpdata/en/3c/63073c52619459e10000000a114084/frameset.htm
    Best regards,
    Eugene

  • Need table and field

    Hi experts,
    These are the table and field i want get it, but there's no data appear when i try it in my sapscript form.
    ALV_SAPLQMAL_001
    CHANGED_DATE
    ALV_SAPLQMAL_001
    CHANGED_TIME
    ALV_SAPLQMAL_001
    CHANGED_BY
    ALV_SAPLQMAL_001
    FIELD_CONTENTS
    Please advise, i need alternative table-field name to retrieve data.
    Thanks in advance, I'll rewards marks ~

    Hi S.r.v.r.Kumar ,
    I can't get the correct table and field to display the data in my form (sapscripts)
    In t-code QM03 - Extras - Notification Documents - Action Log
    These are the data i want it to be at my form (sapscripts)
    http://img406.imageshack.us/img406/7774/q2yh3.jpg
    Any ideas to get the table and field for the data in the 3 column n row?
    Please kindly advice, thank you.
    Edited by: miLka Sasa on Jun 20, 2008 10:09 AM

  • Need  table and field to know whether GR was done for PO

    Hi gurus,
    I want to know whether GR was done for an PO.
    Through which table and field I can know it?
    regards,
    vimal

    Hi
    If  GR / IR is done for the PO, the PO gets updated in table EKBE - Purchase order history.
    If No GR /IR  is done then PO will not appear in this table
    Thanks & Regards
    kishore

  • Need table and field in MIRO

    Hi,
    Here they change the invoicing party while doing MIRO for import orders only.
    Now they want to track the Invoicing party with the concerned material and quantity involved. So can anyone say the concerned table and field.
    regards,
    sathya

    Hi,
    Tables are:
    RBKP (Invoice Header)
    RSEG (Invoice Item)
    and fields:
    Invoicing Party can be found
    RBKP table LIFRE field
    Quantity from RSEG MENGE field
    (and MEINS Base Unit of Measure)
    Material number from RSEG MATNR field
    And you can join RSEG and RBKP with BELNR field (Inv.Number)
    Hope it helps

  • Table and fields name required

    Hi ,
    I am abaper ,i need yr help .
    i had to develop stock transfer report and needed table and fields for stock transfer
    which include way bill no., transport doc. no and date ,stock transfer memo no.
    kindly do held me.

    Sales and Distribution Tables
    KONV Conditions for Transaction Data
    KONP Conditions for Items
    LIKP Delivery Header Data
    LIPS Delivery: Item data
    VBAK Sales Document: Header Data
    VBAP Sales Document: Item Data
    VBBE Sales Requirements: Individual Records
    VBEH Schedule line history
    VBEP Sales Document: Schedule Line Data
    VBFA Sales Document Flow
    VBLB Sales document: Release order data
    VBLK SD Document: Delivery Note Header
    VBPA Sales Document: Partner
    VBRK Billing: Header Data
    VBRP Billing: Item Data
    VBUK Sales Document: Header Status and Administrative Data
    VBUP Sales Document: Item Status
    VEKP Handling Unit - Header Table
    VEPO Packing: Handling Unit Item (Contents)
    VEPVG Delivery Due Index

  • How to find all the DDIC tables and fields of Tcode?

    Hi All,
    For several transactions we have caprtured all the filed names along with the technical names.
    Ex : in VA03 - in the initial screen ,postal code field is there.When i see F1 help for that field i could see POST_CODE2 as its technical name.
    But i want to see the actuall DDIC table field which corresponds to this field that is LFA1-PSTLZ.
    Like wise there are so many T-codes for which i need do the same thing.But for some transactions i am unable to find out the database tables and the corresponding fields.Please suggest any other easier way to do this.
    Is there any way to find out  all the DDIC tables and fields that gets updated for a Tcode?
    Please help me out in this.
    Thanks,
    Jyothi D.
    Edited by: jyothi dosapati on Mar 27, 2008 2:48 PM

    HI,
    DDIC tcode is  SE11
    GIVE THE TABLE NAME THERE AND CLICK DISPLAY
    FOR EXAMPLE
    TYPE LFA1 THERE AND CLICK DISPLAY....
    Regards,
    V .Balaji
    Reward if usefull

  • Table and fields

    Hi Guys,
    I need to generate following reports on daily basis from Production client. But its taking lot of time becoz of huge data to retirve. I request you to help me out in which table and fields can i get the data faster, so that time can be saved.
    Metric                                             Daily/Cumulative     T. Code
    Sales orders Created                                  Daily                SE16(VBAK)
    Incomplete Sales orders                 Cumulative                    V.02
    Open Sales orders                                  Daily                    VA05
    Sales orders PAST due for delivery          Cumulative                    VLI0A
    Deliveries created                                  Daily                   SE16(LIKP)
    Documents Blocked for Delivery                Cumulative                     VA14L
    Deliveries shipped                                 Daily                     VL06O
    Outbound Shipped Not Billed                 Cumulative                      VF04
    Invoices Created                                  Daily                 SE16( VBRK )
    Documents Blocked for Billing                  Cumulative                  V23
    Thanks in advance for your help,
    Regards,
    Vamsi P
    <b></b>

    Hi,
    Please read the rules of engagement before you post.
    Step 1: Finding An Answer
    Rule number one: Try to find the answer first. There are tons of resources out there, show that you have tried to find the answer. <b>A question that shows that the person is willing to try and help themselves is more likely to be answered than one which simply demands information.</b> Tell us what you have done to try and solve the problem yourself - often we can learn from that too!

  • SAP CRM Tables and Fields for Contract start and End dates

    Hi Experts,
    Please Provide me SAP CRM Tables and Field names for the below.
    SAP CRM Contracts start date and End date
    SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
    Thanks and Regards,
    Teja

    correction
    10 Replies Latest reply: 24 May, 2013 8:38 AM by nishant Vasudev  
    Tweet
    SAP CRM Tables and Fields for Contract start and End dates
    This question has been Answered.
    Teja Dhar 12 Oct, 2009 8:03 PM  
    Currently Being Moderated
    Hi Experts,
    Please Provide me SAP CRM Tables and Field names for the below.
    SAP CRM Contracts start date and End date
    SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
    Thanks and Regards,
    Teja
    Correct Answer by Sreekantha Gorla  on Oct 22, 2009 8:22 PM
    Hi,
    dates will be stores in the table 'SCAPPTSEG'.
    I double checked it. This table stores all the date types of one order transactions...
    The relationship is as follows..
    CRMD_ORDERADM_H- guid = crmd_link-guid_hi
    crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
    Thanks and regards,
    Sreekanth
    <:footer>See the answer in context
    6281 Views
    Topics: Customer Relationship Management
    Reply
    Average User Rating
    0
    (0 ratings)
    My Rating:
      Rating Saved!
    Comment on your rating
      Re: SAP CRM Tables and Fields for Contract start and End dates
    Robert Jesionowski 14 Oct, 2009 2:23 PM (in response to Teja Dhar)  
    Currently Being Moderated
        Hi, 
    you should try with FM: CRM_DATES_READ_SINGLE_OB or CRM_DATES_READ_DB.
    There is something in table SCAPPT and SCGENAPPT.
    Regards, R
    Report Abuse
    Like (0)
    Reply
      Re: SAP CRM Tables and Fields for Contract start and End dates
    Teja Dhar 22 Oct, 2009 5:30 PM (in response to Robert Jesionowski)  
    Currently Being Moderated
        Hi Robert, 
    I am not able to find contract start date and End dates in the tables SCAPPT and SCGENAPPT.
    Can you suggest some relevant tables.
    Best Regards,
    Teja
    Report Abuse
    Like (0)
    Reply
      Re: SAP CRM Tables and Fields for Contract start and End dates
    Sreekantha Gorla 22 Oct, 2009 2:35 PM (in response to Teja Dhar)  
    Currently Being Moderated
        Hi, 
    Table SCAPPTSEG stores the contract start and end dates.
    Thanks,
    Sreekanth
    Report Abuse
    Like (0)
    Reply
      Re: SAP CRM Tables and Fields for Contract start and End dates
    Teja Dhar 22 Oct, 2009 5:32 PM (in response to Sreekantha Gorla)  
    Currently Being Moderated
        Hi Sreekanth, 
    I am not able to find contract start date and End dates in the table SCAPPTSEG.This is for appointments.
    Can you suggest some relevant tables.
    Best Regards,
    Teja
    Report Abuse
    Like (0)
    Reply
    Correct AnswerRe: SAP CRM Tables and Fields for Contract start and End dates
    Sreekantha Gorla 22 Oct, 2009 8:22 PM (in response to Teja Dhar)  
    Currently Being Moderated
        Hi, 
    dates will be stores in the table 'SCAPPTSEG'.
    I double checked it. This table stores all the date types of one order transactions...
    The relationship is as follows..
    CRMD_ORDERADM_H- guid = crmd_link-guid_hi
    crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
    Thanks and regards,
    Sreekanth
    Report Abuse
    Like (0)
    Reply
      Re: SAP CRM Tables and Fields for Contract start and End dates
    Wim Olieman 23 Oct, 2009 9:12 AM (in response to Sreekantha Gorla)  
    Currently Being Moderated
        Hi, 
    I can tell you where the pricing records are saved, replicated from ECC.
    The data from ECC table Axxx (e.g. A304) is replicated to CRM table
    CNCCRMPRSAPxxx (e.g. CNCCRMPRSAP304).
    Here you can find fields TIMESTAMP_TO and TIMESTAMP_FROM.
    About the dates: what Sreekantha Gorla stated, about table 'SCAPPTSEG' is correct.
    What might help is to execute program "CRM_ORDER_READ". Here you can find
    the relevant entries also.
    regards,
    Wim
    Report Abuse
    Like (0)
    Reply
      Re: SAP CRM Tables and Fields for Contract start and End dates
    Teja Dhar 23 Oct, 2009 4:59 PM (in response to Teja Dhar)  
    Currently Being Moderated
        Hi Experts, 
    Thanks a lot for your support.My problem got resolved.
    Best Regards,
    Teja
    Report Abuse
    Like (0)
    Reply
      Re: SAP CRM Tables and Fields for Contract start and End dates
    rajesh gadamsetty 27 Nov, 2009 12:29 PM (in response to Teja Dhar)  
    Currently Being Moderated
        Hi Teja 
    Please let me know how you got the dates. i got the same requirement
    Report Abuse
    Like (0)
    Reply
    Correction on above mail.
    Hi Sanjay,
    Can you please help me to find the contract st art date and end date fetching from the table as below
    ITEM DATES:
    Select guid_set from table CRMD_LINK where guid_hi              =  CRMD_ORDER_I-GUID AND
                                                                              OBJTYPE_HI     =  '06'
                                                                              OBJTYPE_SET  =  '30'.
    Select * from SCAPPTSEG where APPL_GUID = guid_set.
    as from the table scapptseg has some unusal fields which fields to select to get the start date and end date and on what condition and isuppose we need to convert als the same
    pls suggest further on same
    regards
    Arora

  • A way to find out tables and fields referred by a transaction

    I want to know whether there is a way to find all the database tables and fields referred by a transaction. I know that we can do F1 on each field to get the reference table and the fielname but its taking a lot of time for me..I need to know if there is any program or a way(some tool) to find out the tables and fieldnames for a transaction. Any help would be greatly appreciated..
    Thanks,
    Mohsin.

    Hi Mohsin,
    As suggested <b>SQL Trace</b> is the best Option.
    Say inorder to Find the field inf. you can use SQL trace (ST05) .
    <b>Steps for the same:</b>
    1) Go to ST05 --> Activate Trace.
    2) Run the trasaction , make some changes to the field for which you want to have the table name then SAVE.
    3) Go again to ST05 ---> Deactive Trace
    4) List trace
    5) Then search for the chaged value which u had done on that transaction.
    6) With this you will be able to see the table name in the Obj. name column.
    **How can we find out what tables are being referred for what field???.
    For this , one way which i follow other then F1 is :
    <b>i follow Steps 2 and step 5</b> which help me to locate those values only for which i am looking for the table only as with the changed value in transaction which u had done in step 2 and after saving it it will go to the DB table and on searching the same changed value in the trace give u the quick link of the table .
      It helped me many times and saves time by doing linke this otherwise u have got all the options to as suggested by the FORUM .
    Cheers
    Sunny
    Rewrd points, if found helpful

  • About Asset report - table and fields

    Hi ,
    I am developing an Asset Report, I need table and field names for following -
    a) GL A/C P&L
    b) ASSET DEPRECIATION SCHEDULED
    c) FORCASTED DEPRECIATION
    d) PLANNED EXPENSES VERSES ACTUAL EXPENSES
    e) GAP DEPRECIATION CATEGORY
    e) When user enters the asset into SAP, the depreciation expense will automatically book to the sub-ledger. However in order to get the amount on the general ledger, which would be closed for prior periods, user must book a manual entry. So , I need this manual entry field.
    Please guide me.
    Regards,
    Narayan

    problem solved

Maybe you are looking for

  • How to restore my backed up photos from iCloud on new hard drive?

    My hard drive failed on my first mac book pro, I have a time machine which has restored all my data on to the new hard drive. However all my photos/videos have not been restored. Can i access these through my backup on iCloud and how ? Why have my ph

  • Online update in FM, SAP 6.0

    Hi people, We are using online update of payment in SAP 6.0 as default for new customers. However i can't find the right combination of commitment item to address the following business process. I need to post travel expenses and travel advances that

  • SBO2007A can no longer change the Price after Discount on marketing docs

    In SBO2005A (subjecting to Document Settings), you could change the Price after Discount.  Thisis no longer available in SBO2007A (unless you upgrade from SBO2005A with the appropiate settings. I have not found a customer who thinks this is good idea

  • User requires ADMIN privilege to perform this operation.

    Hi I have written a procedure which creates a new workspace. The owner of the package has been granted apex_administrator_role. This works fine with SQL Developer/Plus. But when I try to use this procedure from my Apex page I get User requires ADMIN

  • Proble with html table

    i am a beginner, i created a table with 3 rows 1 column and in the second row i split it as 2 columns, in the second column i need scrollbar... can any 1 tell me how to put scrollbar for that column only..... thanx in advance....