Help needed. Problem with servlet.

Hello ppl. Ok. I've never really needed to implement servlets in my projects before but I experimented by writing a simple helloworld servlet. It compiled successfully and I tested it in the examples servlet dir and it worked. To test it in the ROOT dir, I placed the servlet in the ROOT/WEB-INF/classes folder and edited the web.xml file with:
<servlet>
          <servlet-name>HelloWorldExample</servlet-name>
          <servlet-class>HelloWorldExample</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>HelloWorldExample</servlet-name>
          <url-pattern>servlet/*</url-pattern>
     </servlet-mapping>
When I try and execute the servlet by using this URL: localhost:8080/servlet/helloworld I get an internal server error and the server crashes. I removed the entry from the web.xml file and Tomcat started up again. What went wrong? Can someone enlighten me in how to get my test servlet working becuase i may use them in the future. Thanks.

Nope, Still didnt work. As soon as I put in:
<servlet>
     <servlet-name>HelloWorldExample</servlet-name>
     <servlet-class>HelloWorldExample</servlet-class>
     </servlet>
     <servlet-mapping>
     <servlet-name>HelloWorldExample</servlet-name>
     <url-pattern>servlet/HelloWorldExample</url-pattern>
     </servlet-mapping>
Tomcat went offline!
I have another entry which is:
<servlet>
          <servlet-name>org.apache.jsp.index_jsp</servlet-name>
          <servlet-class>org.apache.jsp.index_jsp</servlet-clas
>
     </servlet>
     <servlet-mapping>
          <servlet-name>org.apache.jsp.index_jsp</servlet-name>
          <url-pattern>/index.jsp</url-pattern>
     </servlet-mapping>
Do you think they may be conflicting? Thanks.Tomcat going offline is quite weird. However,
<url-pattern>/index.jsp</url-pattern>
this is perfectly valid. Lemme ask you this: did u come up with this stuff on your own or was it generated for you by the container? It looks like it was generated upon compilation of the jsp. If that is the case it should cause any conflicts. However now if you want to invoke the servlet/jsp you must use a URL like:
http://localhost:<PORT_NO>/index.jsp
Cheers

Similar Messages

  • Basic Help Needed - Problems with Cells

    I have created a table that is only 1 column wide and 2 rows
    high, I have put text in the top cell and an image in the bottom.
    The cell padding and spacing are both set to "0"
    In Dreamweaver the image is directly underneath the text with
    no gap - which is how I want it; however when I view through a
    browser i.e. Firefox or Explorer, the cells are stretched in height
    so that there is a massive gap.
    Does anyone know what exactly is happening and how I can
    rectify it so that the browser shows what I see in
    Dreamweaver?

    Let's see your code, please.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Diamonkn" <[email protected]> wrote in
    message
    news:fvhoiv$s4p$[email protected]..
    >I have created a table that is only 1 column wide and 2
    rows high, I have
    >put
    > text in the top cell and an image in the bottom. The
    cell padding and
    > spacing
    > are both set to "0"
    >
    > In Dreamweaver the image is directly underneath the text
    with no gap -
    > which
    > is how I want it; however when I view through a browser
    i.e. Firefox or
    > Explorer, the cells are stretched in height so that
    there is a massive
    > gap.
    >
    > Does anyone know what exactly is happening and how I can
    rectify it so
    > that
    > the browser shows what I see in Dreamweaver?
    >

  • TS4040 I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs re

    I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs repairing. So I click on Repair, and once again I'm prompted for a password, which I enter, then the same error box opens, and so it goes. Can anyone help me with this problem? I'd greatly appreciate it.
    Thor

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Genius needs to help! problems with my video card and system

    Hey guys! I'm going to post my specs first so that you get a good idea of what I'm running on:
    MSI Neo2 LS 865PE.....MAT=Slow
    Pentium4 2.4C.....FSB=233=2.8C hyperthreading enabled ~>1.55V
    Corsair TwinX 1gig PC3700.....memory on "AUTO" in BIOS with timings at 3,4,4,8 ~> 2.7V
    Radeon 9700NP.....stock speeds ~>1.7V
    AlienX case with 2 fan400 watt power supply and 6 case fans
    Zalman Alum/Copper heatsink fan
    1:I've had this motherboard for a few months now. I upgraded my video card from a nVidia Ti4200(128meg) to a Radeon 9800 a month ago, but I couldn't get it working at 8X AGP, no matter what voltages I threw at it. I returned it for a Radeon 9700NP hoping that it would work, but it still won't.
    I'm using BIOS 1.9 and since there is no option to select your AGP speed, I could only try using ATI's drivers. Once booted into Windows, there is a slider you can move to select you AGP speed. On my machine It says that It has performed some tests and has concluded that AGP 4x is the best for my system....but my system supports AGP 8X!
    I've moved the slider over to 8x (which requires a reboot) at least 5 times with each card but the slider refuses to move past 4xAGP after the reboot.
    2: My second problem: I had an old stick of KingMax PC3200 and decided to buy 3 more sticks. Unfortunatly, the 3 I bought did not match the one I had, so I only put 2 of the new sticks I bought into my system. Immediatly, My system would crash, lock up, files were corrupt, and I got PLENTY of blue screens of death with a long message containing: 0x0000007  with all these other numbers and "0"s. I did a search online and found out I had a hardware incompatibility problem. I never got this with my old stick of ram.
    I returned the 3 sticks of Ram and replaced them with the Corsair. Put my new Radeon 9700 in, formatted my hard drive....and within 24 hours, my system locked up 3 times, rebooted itself 5 times, and gave me the same BSOD as mentioned above with the same long message.  
    I didn't change anything except for the memory and the video card. I've been wanting to overclock, (thats why i bought the faster memory   ) but I'm not sure what to do at this point.
         I have my FSB at 233 but I'm scared to go any higher because of previous system instability at stock speeds. My RAM was running on 400 and MAT=Turbo with the most relaxed timings at 3,4,4,8.
    I've given myself hours of sleepless nights formatting when my system wouldnt boot into windows; overclocking....etc. I NEED HELP. PLEASE. PLEASE. Anything could work at this point.  
         I'm trying to get more info on how to run my system at a 5:4 ratio, also.  
    If anyone has problems like me or knows what could be the problem with my system, please reply to this post, it would help me a lot. I've been trying to fix these problems for a few months now so anything is greatly appreciated.  

    Thanks a lot to you guys that responded. I brought my computer home this past holiday and I want to let you know where I stand as of now. I guess this thread is like my blog for my computer. I want to clear some things before my first post makes everyone confused.
    1- I have only 2 sticks of memory in my system: the Corsair PC3700 TwinX 512x2
    I returned the 3 KingMax I bought, and still keep my old stick just in case.
    2- I am using the 400 watt power supply that came with the case. I read some reviews of the case and I know the reviewer did not have problems with the power supply. In my BIOS, there are some voltages it is weak on. Lets say: it it should be 5.00+, my power supply will be feeding it 4.96v or something like that, but I dont know, or think, that is a major problem...
    3- My computer will refuse to boot if memory speeds are set at anything below 400. SO....if I want to use a 5:4 ratio and have to set my memory speeds to "333" in BIOS, my system refuses to boot.
    4- This morning, I did manage to overclock my FSB to 250. Specs are as follow:
    Memory Timing @3,4,4,8,4.....speed set at "AUTO".....MAT at "SLOW"
    MY 2.4C's FSB was raised to 250 = 3.0gig  
    AGP/PCI frequency: 67.xx/3x.xx (cant go any lower)
    CPU voltage: 1.5500
    Memory voltage: 2.75
    Video Card voltage: 1.7
         Everything was fine for the whole day until I heard something click in my computer around midnight, and then seconds later, my computer froze and made a continuous beeeeeeeeeeeeeeeeeep. (you can imagine)
         This "click" and system crash has been plaguing me for months now. I dont know whay it happens. I was just using AIM when I heard the click and my heart stopped.
    My memory speeds have been set to "AUTO" even at the FSB of 250. But I don't know if this still means my system is at a 1:1 ratio. I know the BIOS then adjusts the memory to work at 500 if my FSB is 250...so I assume it is?    I love 3gig, but somehow I feel that 2.8 is faster, since the FSB=233 running parallel to my memory, also at 233
    A FSB of 250 is good enough for me, that's what I've been waiting 6 months for. If anyone knows how to set other ratios to achieve a FSB of 250+, please let me know, but as I said, my memory won't boot if its set at "333"

  • Help needed quick with AGP problems

    i bought a Radeon 9600 256MB vidcard from Sapphire today, and when i tried it in my K7N2 Delta ILSR, the system would boot, load windows, hang, then refuse to boot unless i removed the radeon ... since i dont have any onboard video, i've been using an Nvidia Vanta before the radeon, any ideas what the prob might be?
    help would be very much appreciated

    Quote
    Originally posted by skzillz
    where can i find the list of recommended memory modules for the Delta ILSR?
    and what are some of the recommended PSU's also plz
    thanks for ur help btw, i had solved the problem by moving the memory from one slot to another, does this give u any idea about any underlying problem with the motherboard??
    I've already given you the top 2 PSU choices, and Bonz has linked you to his sticky on RAM choices. Please read what's been given to you already. As far as RAM I would recommend a good quality Mushkin or Corsair.   Run this to test your memory Memtest
    Good Luck
    Bob

  • Please Help! Problem with 'whistle' when using Audition and Premeire Pro 1.5 with Audigy

    I hope someone can help with this problem. The start of these messages is at the bottom. Any suggestions would be most welcome...Bill Allen
    Hi David (00)... Thanks for your reply. I just wanted to let you know
    that I am going to post all of this correspondence on as many Creative
    forums that I can find in hopes of finding someone that help with this
    problem.
    I will advise you of the results
    Thanks again...Bill Allen
    ----- Original Message -----
    From: "Creative Americas Customer Support"
    To: "Bill Allen"
    Sent: Saturday, February , 2006 :39 AM
    Subject: Re: Creative System Information (English : Adobe Premeire Pro .5
    and Adobe Audition) (KMM987992I6636L0KM)
    > Sir,
    >
    > The only time that I've see a random tone being generated as you
    > decribe, it was necessary to update the system bios to correct.
    >
    > While we are able to playback and record with the card and it's included
    > software, Adobe continues to not allow you to monitor what you're
    > recording. As best we can tell, there's nothing wrong with the card and
    > I would urge you to check with Adobe for any "monitor recording"
    > switches that may be in their software.
    >
    > For faster service please reply with previous correspondence when
    > replying to this email.
    >
    > Best Regards
    > ,
    >
    > David (00)
    > Team Specialist
    >
    > Technical Support
    > Creative Labs Americas
    >
    >
    >
    > To provide feedback on your "Creative Experience" please click on the
    > following link:
    >
    Link removed
    >
    > This link is provided so that you may provide feedback on your "Creative
    > Experience". If you require further troubleshooting or have additional
    > questions simply reply to the original mail and we will be glad to
    > assist you.
    >
    > Original Message Follows:
    > ------------------------
    > Jeen... I appreciate, very much, your reply. But I don't appreciate
    > trying
    > to be 'ping ponged' back and forth between Creative and Adobe. While I
    > realize that you can only deduce a solution from what I tell you, I
    > believe
    > that if you re-read my description of the problem you will realize that
    > the
    > problem is with the sound card and it's associated software. Otherwise
    > why
    > would the system work as expected when it it turned on the next morning?
    >
    > I would also like to know where the 'tone' comes from. When recording
    > video segment (with audio) through the firewire connection of the
    > Creative Audidgy 2ZS card, after a short while the audio is replaced with a
    > constant tone (as I said, it is about 200 Hz). If I record the video thru the
    > Firewire connection and the audio through the 'Line-In' connection,
    > there is no problem with the recording the audio track 'tone free'. However,
    > sometimes but not always, when the audio is played back the tone will
    > appear. This has happened with both Adobe Premeire Pro .5 and Adobe
    > Audition. It is not in the audio track of Adobe Premeire Pro .5 or
    > Adobe Audition, so the problem must lie with the Creative Audigy 2ZS card or
    > it's associated software. I'm sure your audio engineers have knowledge of
    > this problem and I would appreciate an answer.
    >
    > Thanks...Bill Allen
    >
    > ----- Original Message -----
    > From: "Creative Americas Customer Support"
    >
    > To: "Bill Allen"
    > Sent: Friday, February 0, 2006 2:5 AM
    > Subject: Re: Creative System Information (English : Adobe Premeire Pro
    > .5
    > and Adobe Audition) (KMM9780I6636L0KM)
    >
    >
    >> Dear Bill,
    >>
    >> Thank you for replying back to Creative Technical Support.
    >>
    >> With regards to your issue, I understand that you are having
    > difficulty
    >> getting the audio to record from the applications Adobe Premiere Pro
    > .5
    >> and therefore not sound during the playback.
    >>
    >> As you have verified that the sound card is working properly with the
    >> other applications on recording or playback, this could be due to the
    >> improper setup for the audio in the Premiere Pro .5.
    >>
    >> You may like to refer to Adobe for assistance on the configuration of
    >> the audio settings as we are not in a better position to advise you on
    >> third party software.
    >>
    >> Should you have not sound or issues with our software, please feel
    > free
    >> to contact us so that we can assist you.
    >>
    >> For faster service please reply with previous correspondence when
    >> replying to this email.
    >>
    >> Best Regards
    >> ,
    >>
    >> Jeen
    >> Technical Support
    >> Creative Labs Americas
    >>
    >>
    >>
    >> To provide feedback on your "Creative Experience" please click on the
    >> following link:
    >>
    Link removed
    >>
    >> This link is provided so that you may provide feedback on your
    > "Creative
    >> Experience". If you require further troubleshooting or have additional
    >> questions simply reply to the original mail and we will be glad to
    >> assist you.
    >>
    >> Original Message Follows:
    >> ------------------------
    >> Ronshone... Thanks for your reply.
    >>
    >> Here is the information you requested:
    >>
    >> Sound Blaster Audigy 2ZS
    >> PID: 0 03 50 00 00 00 02
    >> Driver Ver: 2.8.4
    >> Firmware : 0.0.0
    >> Model: SB.0350
    >> Serial Number: MSB0350472004288E
    >> Ink stamp: 50SPT470D
    >>
    >> The Audigy 2ZS is the only sound card installed
    >> The Audigy 2ZS card is at least one slot away from the graphics card.
    >> The Audigy 2ZS card is one slot away from another card.
    >> The Audigy 2ZS card is properly seated in the PCI slot.
    >> The PC's internal wires have been moved away from the Audigy 2ZS card
    > .
    >> The 'on-board' sound is disabled thru the BIOS.
    >> The 'on-board' game port is disabled thru the BIOS.
    >> The XP Pro operating system is up to date with all updates.
    >> There were no background operation going at the time of the tests.
    >> The anit-virus program was closed
    >> The CPU is not overclocked.
    >> And, I am the Administrator.
    >>
    >> The card came in a Creative retail Box along with the input unit that
    >> mounts
    >> in the dri've bay. I can't recall what that is called.
    >>
    >> I have relocated the sound card to a slot that is 4 slots away from
    > the
    >> graphics card and slot away from another card, in this case an
    >> additional
    >> IDE dri've controller.
    >>
    >> I have performed the test you outlined. I found that I had to record
    >> using
    >> the 'line in' source input. And I had to playback using the 'wave'
    >> source.
    >> As far as that test is concerned, everything worked. However when I
    >> bring
    >> up Adobe Premeire Pro .5 I do not hear the audio when capturing, and,
    >> even
    >> though the audio meters in Premeire Pro in indicate that there is
    > audio
    >> playing from the audio track on playback, I hear nothing from the
    >> speakers.
    >>
    >> I then brought up the Creative Speaker Settings requester and did a
    >> diagnostic test. All tests indicated "pass". But when I click on the
    >> 'Speaker Settings' and perform the 'Speaker Test' I hear nothing. I
    >> should
    >> add that in both mixers, the Creative Surround Mixer and the Play
    >> Control
    >> mixer, all inputs and outputs are selected (not muted). Also when I
    >> performed this same test yesterday the 'Speaker Test' worked fine.
    >>
    >> On rebooting, the 'Windows XP' sound is heard from the speakers.
    >> Bringing
    >> up Adobe Premeire Pro .5, the audio played as expected. The 'Speaker
    >> Test'
    >> in the Creative Surround Mixer also worked as expected.
    >>
    >> I then recorded the rest of my program using the Adobe Premeire Pro
    > .5
    >> 'Capture' requester and when I tried to playback from within Adobe
    >> Premeire
    >> Pro .5 all I got was a constant tone (about 200 Hz), even though the
    >> audio
    >> meters in Adobe Premeire Pro .5 indicated that the audio was good and
    >> had
    >> no constant tone.
    >>
    >> I rebooted the computer and brought up Adobe Premeire Pro .5 and my
    >> program. Without making any changes to either mixers, Adobe Premeire
    > Pro
    >> .5
    >> performed, and the sound played, as expected. In the 'Play Control'
    >> mixer
    >> only the 'wave' was acti've. All the rest were muted. It was the same
    >> for
    >> the 'Creative Surround Mixer'.
    >>
    >> I am at a loss as to what the problem is. Any help would be
    >> appreciated.
    >>
    >> ...Bill Allen
    >> ----- Original Message -----
    >> From: "Creative Americas Customer Support"
    >> @customercare.creative.com
    >> To: "Bill Allen"
    >> Sent: Monday, February 06, 2006 9:42 PM
    >> Subject: Re: Creative System Information (English : Adobe Premeire Pro
    >> .5
    >> and Adobe Audition) (KMM933384I6636L0KM)
    >>
    >>
    >> Dear Bill,
    >>
    >> Thank you for contacting Creative Technical Support.
    >>
    >> With regards to the issue you are having, I would really appreciate it
    >> if you can provide me with the model number of the sound card. It
    >> should
    >> start with CT or SB followed by 4 numbers found on the sound card. I
    >> also need the serial number which can be found on the sticker and the
    >> ink stamp which is printed on the back of the card. This number will
    >> not
    >> be located on any of the stickers and it will not be labeled. It is a
    >> number that has been stamped on the card itself, possibly near the
    >> outer
    >> edge of the card to determine the best advice for you.
    >>
    >> Did the sound card come pre-installed in the PC, comes in a plastic
    >> cover or brown box or did it come in a Creative retail box package?
    >>
    >> Below is a link that may help with the location of the model number.
    >>
    >> Run a keyword search for SID2456 from the link below.
    >>
    Link removed
    >>
    >> I also need you to try the following recording test.
    >>
    >> SELECT THE RECORDING SOURCE IN SURROUND MIXER
    >> . Go to Start Programs Creative SB Audigy Surround Mixer
    >> 2. Click on the Recording Source (should be on the right side of the
    >> mixer under the REC label)
    >> 3. Change the recording source to Analog Mix
    >> 4. Mute the other analog sources (Mic, CD Audio, Auxiliary, Tad, PC
    >> speaker) that you don't want recorded with the audio stream.
    >> 5. You may wish to select "record without monitoring" by click on the
    >> (+) above the Analog Mix recording source. This keeps the source from
    >> playing out to speakers while recording
    >>
    >> TEST RECORD THE AUDIO
    >> . Go to Start Programs Accessories Multimedia Sound Recorder.
    >> 2. Click the Record button (red dot)
    >> 3. Talk into the microphone
    >> 4. Let it record the source for a little bit
    >> 5. Hit the Stop button (black square)
    >> 6. Hit the play button (single arrow pointing right)
    >> 7. You should now hear the audio that you recorded.
    >>
    >> If you are still having issues, I recommend you to ensure the
    > following
    >> for the audio installation and test:
    >>
    >> - The card is the only card installed other than the Graphics card.
    >> - The card is at least one empty slot away from the Graphics card.
    >> - Place the soundcard away from all the others.
    >> - That the card is seated properly in the PCI slot.
    >> - Move the PC's internal wires away from the soundcard.
    >> - That the on-board sound on your motherboard is disabled through the
    >> BIOS.
    >> - That the on-board gameport is disabled through the BIOS.
    >> - That your motherboard BIOS is up-to-date.
    >> - That the operating system is up-to-date with the latest service
    > packs
    >> and patches.
    >> - That there are no background applications open when you attempt the
    >> solution.
    >> - That the anti-virus program is disabled.
    >> - That if you are over-clocking your system, return all options to
    >> their
    >> recommended settings.
    >> - That you access the PC with administrator rights.
    >>
    >> Do reply back to me if you are still having problems with any error
    >> messages prompted. Thanks.
    >>
    >> For faster service please reply with previous correspondence when
    >> replying to this email.
    >>
    >> Best Regards
    >> ,
    >>
    >> Ronshone
    >> Technical Support
    >> Creative Labs Americas
    >>
    >>
    >>
    >> To provide feedback on your "Creative Experience" please click on the
    >> following link:
    >>
    Link removed
    >>
    >> This link is provided so that you may provide feedback on your
    >> "Creative
    >> Experience". If you require further troubleshooting or have additional
    >> questions simply reply to the original mail and we will be glad to
    >> assist you.
    >>
    >> Original Message Follows:
    >> ------------------------
    >> User Detail
    >> ----------------------------------------
    >> Name : Bill Allen
    >> Email Address : [email protected]
    >> Self Description : Intermediate PC User
    >>
    >> Creative Product Information
    >> ----------------------------------------
    >>
    >> Problem Type : I need help with a third-party software application
    >>
    >> Problem lies with:
    >> ----------------------------------------
    >> Adobe Premeire Pro .5 and Adobe Audition
    >>
    >> Customer's System Specification
    >> ----------------------------------------
    >>
    >>
    >> Detailed Problem Description
    >> ----------------------------------------
    >> I can hear sound from my computers speakers. The diagnostic tests
    >> performed by the Creative software are all "OK", but I cannot record
    >> audio with either of the two programs mentioned above. I have checked
    >> everything I can think of and all of the settings appear to be "OK".
    > I
    >> have also updated the driver for the sound card. What can I do?
    >>
    >> Attachment :
    >> [ Attachment Type: application/octet-stream Name: CTSi.cab]

    TeamRacing6 wrote:
     b noir,
    I can get itunes to start if I disable Bonjour or if I "repair" it first. Sometimes I can repair Bonjour though add/remove programs, sometimes it will only "repair" using WinRar. Sometimes I have to "repair" Bonjour 2 or 3 times to get iTunes to start.
    I have tried uninstalling and reinstalling at least a dozen times. I have tried redownloading iTunes at least 5 times and from different links. This leads me to believe that the dnssd.dll file is not itself corrupt, but this newest version is causing a conflict with XP somewhere somehow.
    Team, iTunes 10.2.2.12 has just been released. I installed it and checked, and BonJour's been updated to version 2.0.5.0, and there's a new 2.0.5.0 version of dnssd.dll on my system. So I reckon it's worth a try updating to that to see if it's of any help with your trouble.

  • Problems with servlet mapping in 10g AS

    Hi There,
    i have a web application consisting of 2 controller servlets and use url mapping to send requests to the appropriate servlet, but i have a strange issue with 10g where it seems to be alternating between serlvets when handling requests!!!!
    the web.xml is like as follows (with the app having the root context '/app'):
    <servlet>
    <servlet-name>control1</servlet-name>
    <servlet-class>com.package1.class.name</servlet-class>
    </servlet>
    <servlet>
    <servlet-name>control2</servlet-name>
    <servlet-class>com.package2.class.name</servlet-class>
    </servlet>
    <servlet-mapping>
    <servlet-name>control2</servlet-name>
    <url-pattern>/special/*</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>control1</servlet-name>
    <url-pattern>/*</url-pattern>
    </servlet-mapping>
    therefore i'd expect a request like http://domain.name/app/special/content to be handled by the control2 servlet and http://domain.name/app/normal/content or http://domain.name/app/normal/special/content to be handled by the control1 servlet...
    but what seems to happen when requesting http://domain.name/app/special/content oc4j seems to alternate which servlet it passes it to...
    is there any reason why this might be happening (like some app server configuration), as i have other applications that are configured in the same way, and there's no problems with requests going to the wrong servlet.
    many thanks for your help,
    Andy

    In your integration process, define the import parameter under Configurable Parameters category.
    http://help.sap.com/saphelp_nwpi71/helpdata/en/44/1f1a5c932d0d19e10000000a114a6b/frameset.htm
    Regards,
    Prateek

  • Help please problem with export

    I had some problems with safari on my imac (OS X) so I did some "repairs" I ended up deleting some keychains and I believe that is what cause the problem I'm having. However I don't know how to fix it.
    When I try to export RAW images from my Lacie rugged external hard drive to the desktop into jpg I get this error...
    "An internal error has occurred: ?:0: attempt to index field 'rootFile' (a nil value)"
    I have a deadline very soon (in about an hour) and need help please.

    Fantastic, these things always happen at the most inconvenient time!!!
    When you've got the job out of the way reboot the Mac and try the export to desktop again. If it is still broken then in Disk Utility run Repair Permissions on the Mac and La Cie.
    Who do I send the bill to???

  • Problems with servlet filters

    Hello,
    I'm trying to implement filters for some of the examples presented in the j2ee tutorial. Thus, I've realized a very simple filter that works very well for the Converter example (mapped to the index.jsp URL). But this filter doesn't work with the Duke's Bank application and I don't understand why. I've tried to map this filter to the Dispatcher servlet and also to different URLs, the filter is actually executed, but the client gets no response from the server.
    Here's the source code for my filter :
    package com.sun.ebank.web.filters;
    import javax.servlet.*;
    import javax.servlet.http.*;
    import java.io.*;
    public final class MyFilter implements Filter {
    private FilterConfig filterConfig = null;
    public void init(FilterConfig filterConfig) throws ServletException {
    this.filterConfig = filterConfig;
    public void destroy() {
    this.filterConfig = null;
    public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws IOException, ServletException {
    if (filterConfig == null) return;
    HttpServletRequest hr = (HttpServletRequest)request;
    System.out.println ("MyFilter : " + hr.getMethod () +      " URL=" + hr.getRequestURL () +          " QueryString={" + hr.getQueryString () + "}");
    chain.doFilter(request, response);
    public String toString() {
    if (filterConfig ==null) return ("MyFilter()");
    StringBuffer sb = new StringBuffer("MyFilter(");
    sb.append(filterConfig);
    sb.append(")");
    return (sb.toString());
    Can anybody help me?
    Thanks,
    B.F.

    As you're not actually doing anything in this filter but a quick System.out.print, there doesn't appear to be a problem with the filter code.
    What does your web.xml file look like?
    Does your IDE allow you to trace through the filter to the next target in the chain? If so, where does the code die? If not, use System.out.print statements to determine how far into the code you get.
    No response to the client usually means that the response didn't have any content set. You can verify this by checking the state of the response object after doFilter has been called; if the headers haven't been set then something crashed in a bad way.
    Good luck!

  • Urgent HELP needed: Problems transfer from Bold 9900 to Z10

    Dear helpdesk,
    I've just received my new Z10 and want to transfer all data from my old 9900.
    Using Link software seems to work fine.... until the copying from the 9900 is almost finished. Then I get the message "Data could not be copied from your device due to the following errors: There could have been a problem with the device or communication during the backup. Verify that the device is tuned on and connected".
    Surely that IS the case.... I've already removed the old BB Desktop SW and reinstalled the Link SW.
    Without success unfortunately.
    What do I do wrong/do I need to do to get my files copied to the Z10?
    I am also wondering what would happen to the memos which I made using the 9900's MemoPad?
    Thanks for your swift help!
    Marnix Kerkhoff

    Hello MarnixKerkhoff,
    Welcome to the BlackBerry Support Forums.
    Reinstall BlackBerry Desktop Software and try to backup the data from your BlackBerry® Bold™ 9900 smartphone. Does the data backup successfully? 
    The BlackBerry MemoPad data will be transferred to the Remember application on the BlackBerry® Z10 smartphone.
    Please let us know how you make out.
    -RoundBrown
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)!

  • PLEASE HELP - Serious problem with my Creative Zen Touch firmware

    Ok, so I finally decided that I would upgrade to the latest firmware version for my Creative Zen Touch. I knew that doing so would erase everything on it, so I backed up everything onto my computer's hard dri've. So from that standpoint, I'm in the clear.
    HOWEVER, during the upgrade process, my computer froze, leaving my precious MP3 player without ANY firmware. This then drove it into "recovery" mode, where I can either clean up, format, or reload firmware. I've gone through each of these options, but when I go to "reload firmware" my computer will no longer detect my Zen! I've tried reinstalling different driver versions, different firmware versions, etc. The bottom line now is that my mp3 player has no firmware, and my computer won't detect it.
    I feel like I probably need to go back to the basics. Unfortuantely, I don't have my installation CD with me. Can anyone post the initial installation file please? Thanks in advance!
    I really hope I can work this out, I don't know if I've gone a day without my Zen in the past two years!

    Simon, this is actually a common problem with the touch. Mine did it about a year after purchase, so I was safe to open it up and fix it. It is actually a really simple fix and is due to a loose connector. I know alot of other people on nomadness.net were having this problem, so I posted a solution here. Hope this helps!
    http://www.nomadness.net/modules.php?name=Forums&file=viewtopic&p=42838

  • Help! Problems with an eraser

    Hi, I'm new to this forum, and I have a problem with an eraser tool.
    I just erased a path, but it becomes like Figure 2!
    How can I erase a middle of path, not digging a cave in them.
    Thank you!

    THat's a closed path, right?
    The eraser tool subtracts parts of shapes. View the artwork in outline mode to understand what it does. If you only want to get rid of a part of the path then you need to use the path eraser tool Illustrator Help | Editing paths

  • Help! Problem with G4 Ti4400

    Hi! I need a help. I bought a videoboard G4Ti4400, and have some problems like:
    When I boot my system show to me some differente words colors, in the same word have the half in white and the other gray color.
    When I use Windows system, rebbot every time, but when I use in DOS, there's no problem.
    And I would like to know how can I use the other conector, there's two conectors, one to the fan and the other?
    I hope I can use to help the energy signal, this is it?
    If could be, what the config the pins in conector?
    Thanks!

    Quote
    Originally posted by nickolai
    That is true, so there could be a psu problem, but the company I rma'd the card to have just emailed me to say they are replacing the card with a 4800se vtd :D , so I think they might have found a problem with the card. Anyway, we'll see when it arrives! Hopefully all will be well or it will be time to send the mobo back again.
    Nick
    Nickolai,
    I had the same problem you had... Flickering dos text and graphical anomalies. I had my G4ti4400 RMA'd back to MSI and they sent me back a shiny new (RED) G4ti4800SE (basically a 2003 g4ti4400) I havent had any problem since i got it back. No wierdness on my screen now. :D  :D  :D  I'm back to playing games like I used to. I'll bet your right and there was a bad batch of G4ti4400's.
    Anyways, be patient.. The RMA process takes a long time. Mine took a month.  :P

  • Help needed please, with Iphone stuck with apple picture and progress bar after software update attempted

    Help needed please, everytime I try to update the software version on my iphone it comes up with a message saying it could not be completed and is now frozen with the apple picture and progress bar on it. Do I unplug it and hope the macbook pro sees it again, I also stupidly did not back up before starting the download which I realise I will have to go back to the previous back up. This keeps happening, everytime I do this type of update, I'm starting to think I should just give up on updating my software on the Iphone. I thought it was happening because I was using a window based computer to do the updates, this time I used my Macbook Pro. Please somebody help

    ljm17 wrote:
    ...This keeps happening, everytime I do this type of update, I...
    Then you should know what you need to do... If you don't remember...
    See Here  >  http://support.apple.com/kb/HT1808

  • Help intermittent problem with logging in

    Help i have intermittent problem with logging in, sometimes it just comes up with the desktop without any icons or dock and i have to restart the server so i can log on properly, but it doesn't happen all the time, any ideas would be appreciated???

    The clients login window just shakes and won't login. I did find one thing that helps some of my Mac Lab woes.
    Some students get a dock that only has 3 icons. These students also will have saving and printing problems when they get this default dock.
    I think some of the problems occur when the student gets over quota, some preference files get corrupted.
    1. Student will login.
    2. Open the student's home folder. Then open Library and Preferences.
    3. Find the file com.apple.homesync.plist and delete it.
    4. Empty Safari Cache and the user's Trash Can and make sure they are not over quota.
    5. Logout and login.
    This will fix some problems, but not the problem when students can't login at all.

Maybe you are looking for

  • USB Recovery problem

    I received my USB Recovery device. I followed directions of turning off computer, inserting USB, Hit escape, then I get the startup Menu. When I hit F9 as instructed, I get a Blue Recovery screen that says Your PC needs to be repaired The boot config

  • My files were changed

    I am a radio disc jockey, and I put a lot of effort storing individual tunes onto my computer in the form of mp3 and wav extensions for the purpose of making my own cd compilations, which I use on my radio program. When I installed itunes software it

  • Suddenly Podcast app only produces sound through speaker, not headphones

    I have not updated to iOS 8 on my iPhone 4S because I heard there were issues, and I've already ordered (but haven't yet received) my new iPhone 6. I don't know if there was a Podcast update that downloaded automatically separately, but suddenly last

  • BOR method for transaction FV60 - FI invoice creation

    All, I want to create a workflow step to create an incoming FI invoice. This is done using transaction FV60. Now, I call this using BOR object BKPF method CREATE. But this is an async method which only triggers event CREATED from object FIPP. A diffe

  • Error when trying to cut /copy

    Once I have Crystal Reports 10 open,  while trying to do a cut copy I receive this error ; "CoInitialize has not been called". Also I can no longer open or save the report. I have to X out of Crystal and start all over. I have checked Event Viewer an