HELP NEEDED!! Recently upgraded my ipad air to the new update, charged it over night, now it will not come on? i plug in the charger but comes up the normal charging sign but still no life in it?

HELP NEEDED!! Recently upgraded my ipad air to the new update, charged it over night, now it will not come on? i plug in the charger but comes up the normal charging sign but still no life in it? Seems as though theres either a problem it charging or starting up. Had the ipad for about a year and a month or 2.. what can i do to source the problem?

Its just started up with the apple sign, then it goes to an off black coloured screen so its on but nothing showing just a dark screen but not jet black.. ahhh help!! thank you in advance

Similar Messages

  • I updated my iphone and restored, now it is not being activated as this cannot be done anywhere in India. the help desk at a store asked me to restore it but there isn't any restore button now!

    I updated my iphone and restored, now it is not being activated as this cannot be done anywhere in India. the help desk at a store asked me to restore it but there isn't any restore button now!

    A compatible SIM card would be from AT&T and would not work in India.  It sounds as if your iPhone was hacked to unlock it and when you updated it, the hack was removed, thus relocking it to AT&T.

  • I have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.

    i have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.

    Given the state your device is in you have already erased your old stuff. You have an image on the screen that says, "Connect to iTunes." That's what the image means. So you will need iTunes on your computer.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS from iOS 5 or Later
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • I updated my Apple TV and now it will not connect to iTunes but it will connect to Netflix . I have restarted it and check wifi

    I updated my Apple TV and now it will not connect to iTunes but it will connect and play Netflix. I have restarted Apple TV and checked wifi connection.

        1.    First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
        2.    If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings).You should also try restarting your router.
        3.    If both of the above don't help, you should try a restore (Settings > General > Reset > Restore).

  • Ipad 2 locked up when updating iOS 8.1.3 today and will not reset or even turn off

    went to update iPad 2 from iOS 8.1.2 to 8.1.3 and it froze while updating.  Then error it could not update because of problem.  But it is locked on screen with cord to iTunes and will not reset or turn off.  Can't get to screen to do reset in iTunes or anything.  help

    Please tell me that it has NEVER been jailbroke.  If it has never been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • I just got the iPhone 5s about a month ago, i decided to turn it off because some of the apps weren't working right, and now it will not turn back on. It says i need to plug it in to iTunes, but my iTunes will not recognize my phone. What do i do?

    I just got the iPhone 5s the Friday it came out. So today i decided to turn it off because some of the apps are not working. Now that i turned it off, it will not let me turn my phone back on until i plug it into iTunes. But i have and now its saying that until my iPhone is restored i can not plug it into iTunes. I already have . alot of stuff such as picture and contacts that i do not want to lose. What is going on and what can i do? This is honestly the most frusterating thing about IPHONEs. PLEASE HELP, I CAN'T HANDLE MUCH MORE. This should not be happening. I did NOT pay 300$ for this to happen in a less than a month of coming out.

    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • Help I just installed the latest update on my IPhone4 and now I can't open any of my stored podcasts. When I hit the podcast icon, the screen goes white for a second and the goes back to the opening page with all the icons. What happened?

    Help! I just installed the latest update on my IPhone 4 and now I can't access my podcasts. When I hit the podcast I on, the screen goes blank for a second and then opens to the home screen with all my icons. What happened?

    Try a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously you see the Apple logo and then release.

  • Itunes recently updated on my PC and now it will not recognize my iPhone.  How do I get it to recognize so I can sync?

    I updated iTunes this morning and afterwards I went to sync my iPhone and iTunes will not recognize the iPhone.  The computer will, but iTunes will not.  How do I get iTunes to recognize the iPhone so I can sync.  I do have the phone connected to the computer with the cable.

    http://support.apple.com/kb/TS1538
    Going to venture a guess your Apple Mobile Device service isn't started.

  • My Ipad froze. I charged it all night. It will not start. Any ideas?

    I think the battery got very low last night. I charged it but it will not turn on. Any suggestions?

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy... Try a Restore...
    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.

  • I was syncing iPad 2 with my macbook and had no problems.  Now it will NOT sync my iCal on my mac with my iPad.  It only syncs with my gmail cal.  I don't know why the change happened.  Need to keep both calendars synced onto my iPad 2 .

    I was syncing iPad2 with my macbook and all iCal info was erased.  It only syncs google calendar.  Info on my iCal won't transfer to iPad.  No problems b4 tonite. 

    What is the file name of the video(s) you want to sync?
    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • I downloaded new update for facebook on my 3gs, it will not open anymore,any help

    downloaded new facebook update, now won't work on 3gs

    Me too facing the same issue. After I updated facebook, its not working anymore. i have reset my iphone but still the same. Can someone help pls !!!

  • While updating new version of software internet stoped working and now it will not reconise my ipod and it stays on one screen with the apple sign and a bar running horrizontle underneath

    while downloading a new version of software the internet dropped out and now itunes Wont reconise my ipod and on the ipods screen their is the apple sign and a load bar running horizontaly can someone help me

    - First try resetting your iPod.  Than may make the iPod visible in iTunes o you can restore it.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next see if placing the iPod in recovery mode will make it visable.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Lastly see if DFU mode will make it visible.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My iPad air is disabled because I endeterd the wong keycode and now and will not enter recovery mode

    My iPad air is disabled because I endeterd the wong keycode too many times and now and will not enter recovery mode. I haven't a clue what to do next?

    Follow the steps in this Apple support page.
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    If you must use Recovery Mode, which is at the bottom of the linked page, follow all steps very carefully. Even hen you might have to try several times.

  • Upgraded Office for Mac 2011 to 14.1.4 and now Outlook will not sync with iCal and Contacts

    I have upgraded my iMac to Microsolf Office 2011 version 14.1.4 and now Outlook will not sync the calender contents and contacts to iCal and Address Book. Prior to the installation of 14.1.4 all worked well. Discovered the problem when I sync'ed my iPad and the addresses and calendar went missing. New entries to the calendar will sync. Help.

    Office is not an Apple product. You are much more likely to find a resultion in the MS forums:
    Office for Mac forums

  • TS3581 I recently updated my Iphone 5 to the latest software.  Now when I connect to my car audio with the hotwire USB it will not display or play my music.  It worked fine before the update.  Is there a setting I don't know about with the new software?

    I Updated my Iphone 5 and now it will not play or display in my car.  I use the apple hotwire to USB to charge and play music in my car.  It worked before the update.  Is there a setting in the new software that needs adjusting ?

    I have a similar problem.  Prior to the 7.0.3 update my iPod touch worked properly and I could see the music folders, playlists and music lists.  However, after the update it no longer works - I cannot see the playlists, the names are blank.
    I do not believe your response properly answers the issue at hand.  If the iPod worked properly before the update then it should work properly afterward. With the response and link above it appears it is Apple's stance that it is the radio manufacturer to make the radio work with every update.  That is backwards and, in my opinion, irresponsible.
    It should be Apples responsibility to make sure that the functionality of the device is the same both before and after an update.  If they cannot do that then they should make it easy for the user to downgrade or uninstall the update to regain the previous functionality, at least until Apple can resolve the issue their update created.
    Rob.

Maybe you are looking for

  • Cumulative balance - which table?

    Hi there, I am writing a fairly simple query from JDT1, but i can't find the cumulative balance column in either ODJT or JDT1. is it in a different table or is there a formula i should write? thanks, my example query is below: SELECT T1.[TransId], T1

  • Update to Acrobat 9.5.1 breaks Flash functionality for reading archived emails

    On installing update 9.5.1 to Acrobat Pro on WinXP, I can no longer read the index of previously archived email collections created using the Email to PDF macro in Outlook 2007. The PDF data file indices were readable before, and are still readable i

  • White Pixels on Dark Screen

    I purchased the 30" Mac monitor and noticed that when the screen is black, there seems to be white flickering pixels across the screen. It looks similar to interference or slight static. Does this mean my monitor has a problem? Thanks for the help.

  • HT4859 itunes backed up my music and emptied my itouch

    itunes backed up my music and emptied my itouch, what do I do?

  • Calling a variable in one function from another

    Okay so here's the situation: I have a function that has a For Loop inside it.  Inside that For Loop I am defining a button and calling to another function if clicked.  The issue is (since I shouldn't put functions inside other functions) how do I ge