Help needed regarding custom reports

hello,
I am using EM 10.2.0.2 on windows 32-bit.
All EM components are installed on a single machine.
Have installed AGENT 10.1.0.5 for managing targets which are on LINUX 2.1
Please help me in getting the solution for the following queries:
(a)I need to create a custom report regarding the CAPACITY MANAGEMENT .
(b)I have some UDM defined but I am not able to use these UDM while creating custom report.
(c)Also is there any possibility that we can use views other than REPOSITORY VIEWS. What I meant was : instead of using REPOSITORY VIEWS can we use the tables of the target instances.
Thanks in advance.

You might want to try posting your question to the Grid Control Forum.
Enterprise Manager

Similar Messages

Help me regarding custom report

Hi,
I have to create a custom report, where i need to show all the users group by managers. Please help me out regarding this.

Hi..,
i got your requirement...
You can avoid some code in a program just by not executing it !!
Create a pushbutton on the application tool bar by using Menu painter and store the function code of that push button in a variable of type sy-ucomm, in the beginning of the program it self..
Now write your code in an IF condition.. with out any events in it ...
<b>data w_ucomm type sy-ucomm.
suppose say the fcode for the pushbutton is FCODE... then
store it in w_ucomm.
w_ucomm = 'FCODE'.</b>
<b>if sy-ucomm ne w_ucomm.
WRITE YOUR NEW LOGIC HERE-------
endif.
make sure that the code inside IF must not contain any events !!</b>
regards,
sai ramesh

Help needed regarding ALV report

Hi,
I have a query regarding ALV report.
The requirement is as follows:-
When the user executes the ALV report and if he sums one numeric field column values and filters out some of the field columns ( for example there r 5 columns in the report and the user has filtered out 2 of them and viewing only 3 columns)
and now the requirements is that when the user runs the report later he should see the modified report ( i mean only 3 cloumns and the total value of the column which he has made) but not the original output which was there when the report was developed.
First of all i wanna know is it possible to do r not. If yes then how
Hope u have got what i want.
eagerly waiting for ur reply.
regards,
maqsood

Hi
Yes you can! You have to manage the layout variant.
So when you call your ALV you have to set the parameter I_SAVE = 'A'.
In this way you'll allow the user to save the variants for layout.
After you has to have a chance to choose the variant in selection-screen.
See the demo program BCALV_GRID_11 to manage the variant in selection-screen.
Max

Need help in creating custom reports

hello,
I am using EM 10.2.0.2 on windows 32-bit.
All EM components are installed on a single machine.
Have installed AGENT 10.1.0.5 for managing targets which are on LINUX 2.1
Please help me in getting the solution for the following queries:
(a)I need to create a custom report regarding the CAPACITY MANAGEMENT .
(b)I have some UDM defined but I am not able to use these UDM while creating custom report.
(c)Also is there any possibility that we can use views other than REPOSITORY VIEWS. What I meant was : instead of using REPOSITORY VIEWS can we use the tables of the target instances.
Thanks in advance.

Same post
Need help on repository views for creating custom capacity planning reports

Help needed regarding font sizes

Iam generating pdf documents using oracle developer's report builder.
When i generate and view those pdf's using the web previewer thay appear to be quite fine,whereas when i host them on ias the font sizes gets bigger, thus lot of text gets truncated.
Is there any parameters that has to be set for it.Pls help

Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore.

Help needed regarding the updation of "Relationships" in BP

Hello Guys,
This is to request you to kindly help me regarding the following.
We have a scenario where all the employees assigned to an Organizational unit (in PPOMA_CRM) are not showing in the "Relationships" ("Has Employee")in the BP transaction of that Organizational Unit.
Could anyone let me know whether there is any update program that updates the "Relationships" from the Organizational asssignment. Or we need to enter the employees manually in BP "Relationships". Please help. Thanks in anticipation.
Regards,
Kishore.

Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore.

Need to customized report in solution manager but duno which table to pull

Dear Gurus,
I need to create a customized report in solution manager to get the following fields:
1) Message number
2) Transport number link to the message number
3) Target client the transport go to
4) Date/Time of status change to "Consolidate"
5) Date/Time of transport imported
6) Date/Time of Email Sent through message when requesting for transport
Pls, help find the relation tables for the above objects, I'm a developer without any functional help and with no knowleadge of solution manager. Pls, help ASAP!
Desperate,
Belinda

Hi Belinda,
open the service message application in the Solman.
Open a service message, focus the needed fields and press F1 for technical details. Try finding the tables by using the where-used list.
Cheers,
André

One query regarding custom report of FBL5 trnsaction.

Hi All,
I had had to add some additional fields to the custom report of the transaction FBL5. up till now i have added the fields to the display layout variant,its getting populated also.But thing is whatever header information it was coming on the top of ALV list in the output of the standard report FBL5,it is in not coming my report.
I am not able to locate it from the code that where is it happening.
can anybody help me in this regard.
Thanks in advance.

Hi,
thats's crazy - similar qu. was asked in FI-Forum:
Re: About GL line item display
-> so try: rigtht mouse click - header information
A.
pls reward useful answers
thank you !
Message was edited by: Andreas Mann

Help needed regarding Segment Qualifiers

Hi,
In my process of implementing Apps R12 afresh, we just created the segments and assigned them their flexfield qualifiers today. In that, the one assigned towards alancing segment shows the value qualifiers like that of natural accounting segment, unlike the bal. segment value qualifier.
I mean, when we try to insert a a value in the bal.segment it asks for qualifiers such as nature:expense/revenue/liability/asset, instead of going for the allow posting and allow budgeting alone. This is crazy, and I need your support.
Thanks,
Mukunthan L

Hi Amit,
Thanks alot for your reply. Its really helpful for me.
So,we usually enter these relationships manually only, right? Before going ahead with the custom program, could you please let me know whether there is any SAP note related to this.Once again thanks alot for you help.
Regards,
Kishore.

Urgent Help Needed in this Report

hi frd. help me in this report.
parameter : plant,material no,company code,storage location.
display: material no, material desc, UOM, ROL, warehouse, open po, open po qty, open pr no, open pr qty.
Kindly Give me tips for doing this report.
thank u
Pari Vendhan.R

Hi Pari,
Go to se38 --Abap editior..
chose the includes u like to be as
Include <>_top.
Include <>_subr.
then follow the events....
Initialization.
( as per requirement).
At selection-screen.
Perform fetch _data.
Perform fefilloutput.
any other logic to be followed for u r report.
end-of-selection.
Perform output.
In include top.
Put the declarartion part and the selection-screen block.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : pa_werks LIKE table name-werks
pa_material no like tablename-field.
SELECTION-SCREEN END OF BLOCK b1.
like wise u need to put the logic for the requirement
Thanks
Mohinder Singh Chauhan

I need my custom reports to look like the packaged Oracle Reports in Apps

Hello,
I have several custom reports developed with Oracle Developer that I am adding into Oracle applications. However, they are still using the default template(with Oracle corp image in upper left hand corner). I want these custom reports to be identical with the Oracle apps reports. Is there an Oracle apps template and/or librarie(s) that I can use to pull this off?
Thanks in advance

Hi
Oracle Apps Reports are all Character Based Reports and not Bit Mapped Reports.
So Apps Reports will not support Templates and Apps does not provide any Templates for its reports as the way Oracle Apps Forms provides.
If at all you want the same look and feel of your Custom Reports to be as Apps Reports what you can do is :
1.In the Report Module Property Design in Charatcter Units should be set to No.
2.In Layout Model ensure the Units of Measurement is set to Character.
3.In Layout model do not include any formatting like Text Bold Italics.
4 In Oracle Apps Concurrent Programs ensure your View Output is set to Text.
Once these points are considered then i am sure you will be able to see your Custom Reports as the same look and feel of Oracle Apps Reports.
Regards
Nakul Venkataraman

Help needed Regarding Project Server - 2013 Workflow

Hi All,
I am new to Project server 2013 Workflow, hence please help me regarding this. Pardon me if this question is too trivial.
I have created a project type associated with a workflow and my workflow is as follows :
So I am not doing anything here, I am just testing the workflow as mentioned by technet site : http://technet.microsoft.com/en-us/library/dn458865(v=office.15).aspx
But it is mentioned that, after a minute or 2, the workflow state will change, also they have mentioned to press the Submit button.
But in my case, the workflow is not moving to next stage [It just says 'The workflow is still processing - which never changes after hours] or I am getting the submit button (Submit button is disabled on the ribbon). Below is the state of my workflow :
PS : I have made the user added to Portfolio managers group as well. But still I am having this same issue.
The Workflow manager is installed properly, and it is working fine in case of List workflow. I am facing the issue only wrt Site workflow for Project server 2013.
Please help me to solve this issue.
Thanks,
shanky

Hi Kiran,
I am now facing issue while assigning a task to a person in the workflow.
I am having a person named say 'John' , who is included in Project Manager as well as Portfolio Manager.
And I am using a workflow as :
Stage : Conceptual
Assign a task to John (Task outcome to Variable: Outcome5 | Task ID to Variable: TaskID3 )
Transition to stage
Go to Approval
But this is again giving issue as :
Workflow Internal status : Cancelled
Details: System.ApplicationException: HTTP 401 {"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access denied. You do not have
permission to perform this action or access this resource."}}}
PS : I have used the same Sharepoint admin account for 'Account Name' in ‘User Profile Sync' , Is this causing the issue? Please let me know.
Thanks,
Shanky

Help needed regarding BADI.

hi all,
can anyone plz tell me how to define BADI and how create an interface.
plz tell from everything regarding that, i have work with basic ABAP only.
anykind of links and any kind of matter will be helpful and you will be rewarded with points for your help difinatly.
regards.
raman.

Hi Raman,
Please search the forum and you have lots and lots of links in it. For you to start with, try these links,
The specified item was not found.
BADI
Best Regards.

Help needed regarding replication in ds5.2sp4

Hi ,
I am new to ldap . I am able to establish replication between master and consumer and trying to update it is getting update but i am geting the following error
in error log
INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Replication bind to consumer alpha.ad.com:19941 failed:
[16/May/2007:13:48:26 -0700] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Failed to connect to replication consumer alpha.ad.com:19941
[16/May/2007:13:48:26 -0700] - ERROR<8318> - Repl. Transport - conn=-1 op=-1 msgId=-1 - [S] Bind failed with response: Failed to bind to remote (900).
Please help me regarding this .
Message was edited by:
ap7926

If data is getting replicated from master to consumer then the bind for that specific replication agreement is working.
Check your timestamps and current log entries. Are the "Failed to connect to replication" messages currently being generated? As long as your replication agreement is enabled the supplier will try to keep things up and running, retrying a failed consumer regularly (and generating about 1 set of log messaages per minute on my systems). So you'll get those messages on the supplier when a good consumer is down (the nsslapd directory server process that is).
If you don't have these messages being generated currently then this probably means that your consumer was down around "16/May/2007:13:48:26 -0700" but is ok now. In that case those messages aren't of big concern. They're just telling you that you had a problem, which you hopefully already knew about.
If replication is working (test by making a change on the supplier and checking it on the consumer) AND you're still concurrently getting these messages regularly then you have something interesting going on, probably due to a configuration issue. Without seeing the details it's difficult say what it would be.

Help needed for Custom Trusted Reconciliatin API uses

Hi Experts,
I have created Resource Object, One Process Definition and One Reconciliation Rule.
I have mapped FirstName,lastname,username,UserType(End-User),Type(EMP to Role),organization,email .
After that after calling createReconciliationEvent() API, I am getting the following error:
+<Dec 22, 2011 7:49:54 AM CET> <Error> <oracle.iam.reconciliation.impl> <IAM-5010000> <Generic Information: {0}+
oracle.iam.reconciliation.exception.ReconciliationException: Exception occurred while inserting data into table RA_TESTRECONFLATFILE74 due to RA_TESTRECONFLATFILE74
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.reconEvent(ReconOperationsServiceImpl.java:285)
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.createReconciliationEvent(ReconOperationsServiceImpl.java:189)
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.createReconciliationEvent(ReconOperationsServiceImpl.java:212)
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.createReconciliationEvent(ReconOperationsServiceImpl.java:201)
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.createReconciliationEvent(ReconOperationsServiceImpl.java:197)
at oracle.iam.reconciliation.api.ReconOperationsServiceEJB.createReconciliationEventx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Please help.
Regards,
J

http://docs.oracle.com/cd/E17904_01/doc.1111/e14308/recon_service.htm#BABGIIIA
-Bikash

Help needed regarding custom reports

Similar Messages

Maybe you are looking for