[HELP] NI MAX Error and Lockup...

I have a NI PXIe 1062Q and NI PXIe 8135.  Windows 7 Professional 64-bit installed.
I removed all the NI software using the control panel and then installed NI Developer Suite 2012. As part of the install the following was installed:
NI Developer Suite Core
FPGA Deployment Option (Excluding Xilinx Compilation Tools 10.1)
Automated Test Option
I2C & SPI
NI Serial + VISA
When I start NI MAX it errors with an exception. If I continue it then locks up. All the menus are greyed out! It was working (with the error), but now it locks up completely.
I have attached the dump and log file.
Also in the rack are:
PXI-6509 DIO Card
PXI-7953R + 5734R DAQ + FPGA
CB2-1-PIPE USB controller
PXI-2503 Switch
PXI-4070 DMM
PXI-8430/4 RS-232 Card
Christopher Povey
Senior Test Systems Engineer for BAE Systems.
Solved!
Go to Solution.
Attachments:
20150203_090112-NIMax-0000134C.log ‏9 KB
20150203_090112-NIMax-0000134C.log ‏9 KB
20150203_090112-NIMax-0000134C.zip ‏26 KB

I worked it out in the end.
The PXI chassis came pre-installed with a few cards we had ordered. I think NI installed the drivers for these cards (probably later than 2012). I then removed all the NI software from the Control Panel and installed NI Developer Suite 2012. I think the drivers clashed. I did a full system restore from the image on the drive and re-installed NI Developer Suite 2012 and it was fine.
Christopher Povey
Senior Test Systems Engineer for BAE Systems.

Similar Messages

  • HELP!  iTunes error and wipes out iPod

    My husband just bought an iPod nano and when he is trying to move songs from iTunes an error comes up and deletes the songs already on the iPod. The error comes up at various times too. At first we thought it was a song, but I have no idea now. The error says 'Attempting to copy to the disk failed. An unknown error occured (-124)'. Then another one pops up...'iTunes; iTunes.exe-Corrupt file. The file or directory \iPod_Control\iTunes\iTunesPrefs is corrupt and unreadable. Please run Chkdsk utility. I have the same nano and mine works just fine. He is getting frustrated because of this. I cannot find where the Chkdsk utility is located either. Please help!
    Thanks
    Angie

    I don't
    think I should have to do anything will iTunes since
    it works fine with my iPod.
    I agree that it's unlikely to be iTunes itself because yours is working fine. But software is a complicated thing and I've come to the conclusion that you should reinstall iTunes after UNINSTALLing it first. It won't take long and it may well cure the headache.
    You're probably thinking that you'll lose everything in iTunes but you shouldn't. And this is easy to be certain of by backing up the iTunes database like so...
    1) In the file menu, click 'Export Library...' This backs up the internal database to a single file. Save the resulting file somewhere such as your desktop.
    2) If the song info is gone after reinstalling iTunes, simply select 'Import' from the file menu and point it to the file you saved.
    None of this affects your actual song files which remain completely unchanged by the whole process.
    Finally, it is actually conceivable that your husband's ipod is faulty.

  • Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

    Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
    The paid upgrade of "Converter" doesn't work.
    Instructive documentation - not very good.
    Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
    Could use timer tracking of the record process.
    Are there operating system limitations? (Have Windows XP Pro)

    That is an issue for the developer of that Download Helper.

  • Been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft? Help me please.. getting a bit bored?

    been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft version? Help me please.. getting a bit bored?

    i have this problem too
    my dad thinks its because itunes is getting overloaded

  • Itunes encountered an error and needs to close-HELP!!

    every single time that i open up itunes (or attempt to at least) it says that itunes encountered an error and that it needs to close. this is getting extremely frustrating and the i have tried everything. at this point i'm open to anything and everything, someone just please help me!

    Perform a Thorough & Complete Uninstall and Reinstall of iTunes/QuickTime
    (Compiled from the collective wisdom of toonz and Da Gopha)
    If you want to guarantee a successful upgrade and be proactive about minimizing potential install issues, do the following:
    1. Completely Backup your music and iTunes library files.
    2. Virus check / spyware scan your machine.
    3. Completely remove / uninstall the current version of iTunes and QuickTime from your system.....
    3a. - Turn off all security software such as Norton, McAfee, SpySweepers, any TSRs, etc. (exit via the system tray)
    3b. - Do a Stepwise clean uninstallation of iTunes
    3c. - Then download and install the Microsoft Installer Cleanup Utility
    .....And make sure iTunes is really gone.
    4. Delete the contents of your temp folder: C:\Documents and Settings\<username>\Local Settings\Temp
    5. Reboot the PC
    6. Turn off all security software such as Norton, McAfee, SpySweepers, any TSRs, etc. (exit via the system tray)
    7. Start with the QuickTime standalone installer run from the PC (not directly from on-line)
    8. Reboot the PC
    9. Turn off all security software such as Norton, McAfee, SpySweepers, any TSRs, etc. (exit via the system tray)
    10. First completely download, then run the latest iTunes Installer from your PC
    11. Reboot the PC
    The majority of problems out there on the discussion boards are caused by viruses or other system corruption — sometimes self-inflicted by the user (i.e. - people who turn off necessary Windows services) — or out of date drivers. You may want to consider this if your PC falls into one of these categories.

  • HELP! Adobe Muse encountered an unexpected error and will have to be terminated. BD/getColorBoundsRe

    I keep getthing message when my file loads in the program "This document contains 3 links to assets being unsampled. You should resize smaller or right-mouse click on the assets in the Assets panel to see additional options."
    and then I click okay.
    I get to the plan mode and then I try to go to the design mode (so i can fix the assets) and at about 90% loading it gives me this message "Adobe Muse encountered an unexpected error and will have to be terminated.
    BD/getColorBoundsRect-ArgumentError: Error #2015: Invalid BitmapData." and i have to terminate the program...
    How can i fix my assets so i can open my program? I use muse beta prerelease.

    Well, after 20 hours of work and rebuilding most of my Muse website I finally was able to upload by site again.
    Here was my problems per above and the last 20 hours. When publishing the site it does the following: Optimize assets, exportin desktip page 1 thru 19, Fining export HTML files then uploading images which I have 2208 on this site plus other stuff uploaded.
    I can not answer why it now works as "normally"it would het error #2015 uring optimizing assets wich is an invalid bitmap data error and failed at only 9% publish process then got a 1125 index 0 is out of range0 at publish 20% complete.
    I did rewrite most of the pages and made minor changes to all of them thinking that would force all pages to be uploaded as I also took option to upload all pages instead of just those that changes. All 2008 images were reloaded onto the pages by another hint I read on how to delete all thumbnails and thus the files is to select all and press delete and it will leave one as required. Then the one left could be deleted by itself. Thanks for whoever asked the question and who answered it. This saved me a lot of time.
    Thanks to all that have taken the time to help me out. Muse is a great program but sometimes you don't have any idea if it is working at something so I found myself looking at the computer busy light to see if Muse was taking a lot of cycles. It would help to have a wider use of the cursor busy indicator as sometimes the system seemed like it was hung up but it was not.
    Thanks guys!

  • I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer.  Any help is appreciated!

    I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer.  Any help is appreciated!

    Hey socestlavie,
    Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thanks,
    Matt M.

  • I'm new to the Mac world. I installed my Epson printer on my IMAC and it worked fine. Then I installed Windows7 through Bootcamp and I think it reconfigured a port and now I get a communication error and it won't print. Any help on how do to fix this?

    Sorry, I'm new to the Mac world. I recently got a new IMAC and installed my Epson CX5800F printer and it worked fine. Then a few weeks later I installed Windows7 through Bootcamp and I think it reconfigured a port or something and now I get a communication error and it won't print. Can anyone help me with this problem, and/or help me get the port back the way it was? Thanks, Barry

    While looking through profile first aid, I came across this that might help explain my problem.
    Searching for profiles...
    Checking 20 profiles...
    /Library/Printers/EPSON/InkjetPrinter2/ICCProfiles/Standard.profiles/Contents/Re sources/Epson IJ Printer.icc
       Tag 'desc': Tag size is not correct.
       Tag 'dmdd': Tag size is not correct.
       Tag 'desc': Description tag has a bad Macintosh string.
       Tag 'dmdd': Description tag has a bad Macintosh string.
       The file is locked. Could not be fixed.
    Repair done - 0 out of 1 profiles fixed.

  • Hey all just trying to set up my ipad synced up with itunes but now if i try to download any apps i put my password in then comes up with unknown error and wont download any help would be great

    hey all just trying to set up my ipad synced up with itunes but now if i try to download any apps i put my password in then comes up with unknown error and wont download any help would be great

    Reset your iPad and see if that helps.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Hi, i'm new using numbers, and when I try to open a excel file don't let me do it, instead appears a box whit a error and close app,  any help?

    Hi, i'm new using numbers, and when I try to open a excel file don't let me do it, instead appears a box whit a error and close app,  any help?

    What does the error say?
    A couple of thoughts: the file is corrupted or is password-protected. Corruption is more likely to cause Numbers to crash & Numbers cannot open password-protected Excel files. Try using one of the free Office clones & see what happens.

  • HT1689 i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

    i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

    It sounds like it still has her information on it, so it might be efficient to navigate to Settings, then General, then Reset, then Erase All Content and Settings. You can then set up the phone again, using your information. This way the phone will be yours, officially, and her data and information will be removed.

  • My macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help.

    my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
    disk utility give me this:
    Process:         Disk Utility [371]
    Path:            /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
    Identifier:      com.apple.DiskUtility
    Version:         11.5.2 (298.4)
    Build Info:      DiskUtility-2980400~60
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [86]
    Date/Time:       2013-11-05 03:29:41.247 -0500
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          9522 sec
    Crashes Since Last Report:           29
    Per-App Interval Since Last Report:  981 sec
    Per-App Crashes Since Last Report:   25
    Anonymous UUID:                      F6B8E263-76C8-4C7D-AA58-48134BF4BA78
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Thread 0 Crashed:  Dispatch queue: com.apple.main-thread
    0   libobjc.A.dylib                         0x0000000100c62fbc _read_images + 312
    1   libobjc.A.dylib                         0x0000000100c79721 map_images_nolock + 1266
    2   libobjc.A.dylib                         0x0000000100c62761 map_images + 115
    3   dyld                                    0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
    4   dyld                                    0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
    5   dyld                                    0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
    6   dyld                                    0x00007fff5fc08f7c dlopen + 490
    7   libSystem.B.dylib                       0x0000000100a14e40 dlopen + 61
    8   com.apple.CoreFoundation                0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
    9   com.apple.CoreFoundation                0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
    10  com.apple.Foundation                    0x0000000101008355 _NSBundleLoadCode + 638
    11  com.apple.Foundation                    0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
    12  com.apple.Foundation                    0x000000010101960c -[NSBundle principalClass] + 38
    13  com.apple.framework.DUSupport           0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
    14  com.apple.framework.DUSupport           0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
    15  com.apple.DiskUtility                   0x0000000100006082 0x100000000 + 24706
    16  com.apple.DiskUtility                   0x0000000100005f59 0x100000000 + 24409
    17  com.apple.AppKit                        0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
    18  com.apple.AppKit                        0x00000001013e1f77 -[NSWindowController window] + 112
    19  com.apple.AppKit                        0x00000001015f61d9 -[NSWindowController showWindow:] + 47
    20  com.apple.AppKit                        0x00000001015c7c5c -[NSDocument showWindows] + 98
    21  com.apple.AppKit                        0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
    22  com.apple.AppKit                        0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
    23  com.apple.AppKit                        0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
    24  com.apple.AppKit                        0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
    25  com.apple.AppKit                        0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
    26  com.apple.Foundation                    0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
    27  com.apple.Foundation                    0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
    28  com.apple.AE                            0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
    29  com.apple.AE                            0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
    30  com.apple.AE                            0x0000000104d7312b aeProcessAppleEvent + 210
    31  com.apple.HIToolbox                     0x00000001028a0619 AEProcessAppleEvent + 48
    32  com.apple.AppKit                        0x00000001013fc095 _DPSNextEvent + 1191
    33  com.apple.AppKit                        0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
    34  com.apple.AppKit                        0x00000001013c168f -[NSApplication run] + 395
    35  com.apple.AppKit                        0x00000001013ba3b0 NSApplicationMain + 364
    36  com.apple.DiskUtility                   0x0000000100002009 0x100000000 + 8201
    37  com.apple.DiskUtility                   0x0000000100001db8 0x100000000 + 7608
    Thread 1:  Dispatch queue: com.apple.libdispatch-manager
    0   libSystem.B.dylib                       0x0000000100a27c0a kevent + 10
    1   libSystem.B.dylib                       0x0000000100a29add _dispatch_mgr_invoke + 154
    2   libSystem.B.dylib                       0x0000000100a297b4 _dispatch_queue_invoke + 185
    3   libSystem.B.dylib                       0x0000000100a292de _dispatch_worker_thread2 + 252
    4   libSystem.B.dylib                       0x0000000100a28c08 _pthread_wqthread + 353
    5   libSystem.B.dylib                       0x0000000100a28aa5 start_wqthread + 13
    AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

    I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

    Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
    Read:
    http://www.apple.com/support/iphone/assistant/restore/

  • HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

    HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

    I have the same problem, and the solutions in   Error changing modules | Lightroom do not work.  Even uninstalling and reinstalling a new copy did not solve the problem.  As anyone got an idea what other lingering files might be causing the problem?

  • Tried to install the most recent update and now my ITUNES won't load. Getting an error message that says there is a "runtime error" and that I need to reinstall INTUNES. Help!!!

    Tried to install the latest ITUNES update, but now it won't open my ITUNES at all. Saying I have a "Runtime error" and that I need to reinstall ITUNES. Tried a "repair" in Programs on my computer, but that didn't work either.

    Hello joeydak,
    We've an article that provides troubleshooting steps which can help get iTunes back up and running.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Allen

Maybe you are looking for

  • Macbook Pro with Dual hard drives. Scratch Disk, Memory 64bit, Raid, Set Up Questions.

    Hello, this is my first post. I just upgraded from the original 2006 17" Macbook Pro to a refurbished 13" Macbook Pro 2.53GHZ 4GB Ram (2009 model). I bought the MCE Tech Optibay and installed it (if you dont know anything about it, ask me, its amazin

  • ISE and wireless CWA

    Need some help on this one. This is ISE 1.1.1 and WLC 7.2 I want to use CWA and Webauth for guest users, and I have configured that on the ISE and WLC. This is working but I need some clarification :-) First I tried to use AuthC policy with allowed p

  • Send button is very wide in IE (fine in FF)

    Hello All I am trying this guys code for submitting a form without page refresh using jQuery - things are going well except for (in) IE. The send button is really wide in IE but perfect in FF - I truly dont remember ever seeing this and cant find a s

  • Dump while Accessiing Table maintenance for Table P44V thru SM30

    Hi, I need to insert an entry into P44V table thru table maintenance (SM30). But, when I try to access this, run time error is coming sayig "DYNPRO_NOT_FOUND" Error analysis     The system attempted to use dynpro 0001 in program "SAPLWIS_PLAN_C".    

  • Unable to view Portal Resources from the Portal Administration console

    Hi, When I trying to view the portal resources I got an empty page and the following exception: <Apr 5, 2007 11:22:38 AM GMT+08:00> <Error> <netuix> <BEA-423168> <An exception or error occurred in the backing file [com.bea.jsptools.interaction.backin