Help on cdc and pp

1) i would like to develop application for pocket pc using cdc and personal profile for pda and i still don't how to begin even after reading the documentations that came with cdc and profile.help me please!
2) is there any IDEs and emulators available which can be used to develop cdc and personal profile based application.
3) can please recommend a high end pda that is suitable for application developed with cdc and personal profile.is the latest HP PDA : h5550 suitable?
4) Please recommend web sites or books regarding application development for pda using cdc and personal profile.

1) What you need is to buy Daryl Wilding-McBride's Java Development on PDAs (available at Amazon).
2) About IDEs, yes, there are specific IDEs like the one from IBM. Though I found it difficult to get it running. Actually, you can use any IDE; I mean, I use Kawa because that's what I first learned. You have to install the proper JDK, and also you can use JavaCheck to make sure that your code is compliant (sp?) with Personal Java (yes, Personal Java). The biggest problem with this would be to find the Specifications file, but if you look for them in this forum you'll find them.
About the emulator, yes, you can use the one from Microsoft (if you don't find it let me know and I'll look for the link). It's a huge download, because it doesn't come by itself, but as part of a whole package. This emulator doesn't emulate the hardware, only the software. Which means that you need a JVM that will run on x86 CPUs. For that purporse you can download CrEme (which is free, like the emulator).
3) I guess any hidh end PDA is good for it (as soon as it's Java compatible)
4) I mentioned the book already. That's the best you'll find right now. Also, you could go to www.javaranch.com and read through the J2ME board.
If you need any more help, let me know
Good luck!

Similar Messages

There are two CDC methods - Source based CDC and Target based CDC which one

There are two CDC methods - Source based CDC and Target based CDC, which one is better performancewise. in data services.
If there is any document available which compares both and provides any info on performance etc, will be helpful.
thank you for the helpful info.

LIke Suneer mentioned CDC is for better performance.
Following link would be helpful.
http://wiki.sdn.sap.com/wiki/display/BOBJ/Extractors-Source-Based+CDC
http://wiki.sdn.sap.com/wiki/display/BOBJ/Extractors-Target-Based+CDC
Thanks,
Arun

What is the difference between CDC and SCD type2

I am a new user of BODS and Have used SCD type 2 (delta's) capturing and loading the difference of data to targets.
Trying to understand the difference between CDC and scd type 2.
CDC says capture changed data, so i assume both are same, is that true?
thanks for the helpful info.

CDC is Change Data Capture -
The CDC methods will enable you to extract and load only the new or changed records form the source, rather than loading the entire records from the source. Also called as delta or incremental load.
SCD Type 2 (Slowly Changing Dimension Type 2)
This lets you store/preserve the history of changed records of selected dimensions as per your choice. The transaction table / source table will mostly have only the current value and is used in certain cases where in the history of a certain dimension is required for analysis purpose.
Regards,
Suneer

J2me swing, cdc and window

my company has developed a working version of swing w/ serializable on the desktop and like to import them into a pda. when i research this option online and i find out that only cdc can do that. however, when i download cdc and it seems that the package is only linux. where can i download a package that can used on window. i need to have swing on the pda, can cdc support all swing component? if not, what other options can i have?? i read online that j2me does not fully support swing, is that true?? i am a new programmer in j2me and really appreciate any help that i can receive.
many thanks
Yang

First you should be aware that CDC is a configuration, so it does not contain any GUI components. In J2ME there are 3 different Profiles which are based on CDC.
Foundation Profile (FP), Personal Base Profile (PBP and Personal Profile (PP). Only PP contains enhanced Java GUI elements. But it ONLY contains AWT. SWING is NOT supported and is not part of the PP specification.. Some JVMs like Creme from NSI (http://www.nsicom.com/) support Swing as opptional non-specification package. But you must buy the Creme JVM. The IBM VM J9 supports a reduced version of SWT (a GUI Framework), but not SWING. So generally it is very difficult to use SWING on a PocketPC.

CDC and SVG

Hello! I am beginner in CDC and I need help in developing cdc application..I need to view svg image..
Edited by: krunchie on Dec 15, 2009 8:32 AM

The PocketPC Support Both CDC and PP profiles, but Palm Doesn�t.
The PalmOS will support until the PalmOS 6 release.
http://www.cs.ucl.ac.uk/staff/s.zachariadis/palmjava.html

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

What file format did you export it to?

HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H.

Does any update help to install and run myFaces components?

Hi.
I have JSC trial. And didn't make update.
I can't install myFaces component library. Why?
Does any update help to install and run myFaces components, and other component library?
Thanks.

Hi,
The following thread could be of help for you:
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=48666
Cheers :-)
Creator Team

Need help to import and syncronize HCM pagelets with Interaction Hub, how can I do that?

Hi,
I need help to import and synchronize HCM pagelets with Interaction Hub, how can I do that? The default page "Select Remote Content" of the WorkCenter "Unified Navigation WorkCenter" is not working as well, when I run the import/sync button I get the following error message:
Integration Gateway: General Connection Failed (158,10836)
This error is thrown when there is no valid response.
Possible errors include:
Bad gateway URL
Sync Service Timeout set and Service actually timed out.
Java exception thrown - Check Application Server for possible Java exception

Do you have integration configured between the two systems? It sounds like you don't from the error. Here is a walk-through on setting up Unified Navigation although it assumes you have integration already working. If you haven't done that, it's documented a hundred different places.
http://remotepsadmins.com/2013/03/04/peoplesoft-unified-navigation-with-peoplesoft-applicatations-portal-interaction-hub/

My account is locked, i cant remember my security question, and I accidentally entered my itunes card in here instead of my other account, so can someone from apple help me out and fix my account

my account is locked, i cant remember my security question, and I accidentally entered my itunes card in here instead of my other account, so can someone from apple help me out and fix my account (and no, i dont have any rescue email address or whatsoever)
please help me because i dont to waste money for nothing

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

My Macbook is not working properly, I went to a Genius Bar appointment, they were not helpful at all and just told me to go off and reboot my Mac and then restore via TimeMachine. I dont know how to do this. I am extremely displeased with Apple, help me?

My late 2011 Macbook Pro is not working properly it is very slow and extremely painful to use, I went to a Genius Bar appointment, they were not helpful at all and just told me to go off and reboot my Mac and then restore via TimeMachine. I dont know how to do this. I am extremely displeased with Apple at the moment, can someone please help me?

Your problem description is generalized and non-specific. I would make another appointment at the Apple store and insist they help you execute their suggested fixes.
Incidentally, if you search this site, Apple has excellent articles re: restoring a system.
Barry

HT1926 hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll.

Using Search Help with ALV and Dynamic context node

The topic subject already describes my situation.
I have to create, populate and remove context nodes at runtime, and bind them to an ALV, to let user display the data or modify the data. The nodes I create are always typed with a table name, but the table name is of course, dynamic.
This is all working: what's not working is help for entries inside the ALV; since the table has foreign keys and domains with check tables or fixed values, I expected that search helps were detected and managed by the framework.
Instead, no help search is displayed except the input help based on data-type of the one "Date" input fields.
I think I have to work on the dynamic node creation, and not on the ALV itself, since the latter only takes the node/attributes information, but i could be wrong. I tried with both the two following codings:
CALL METHOD lo_nd_info_root->add_new_child_node
    EXPORTING
      static_element_type          = vs_tabname
      name                         = 'SAMPLE_NODE_NAME'
*    is_mandatory                 = abap_false
*    is_mandatory_selection       = abap_false
     is_multiple                  = abap_true
     is_multiple_selection        = abap_false
*    is_singleton                 = abap_false
      is_initialize_lead_selection = abap_false
      is_static                    = abap_false
    RECEIVING
      child_node_info              = lo_nd_info_data .
cl_wd_dynamic_tool=>create_nodeinfo_from_struct(
      parent_info = lo_nd_info_root
      node_name = 'SAMPLE_NODE_NAME'
      structure_name = vs_tabname
      is_multiple = abap_true ).
The result is the same...is there any way to let the ALV know what search helps it has to use, and doesn't force me to manually build a VALUE_SET to be bound on the single attributes? There are many tables, with many fields, and maintaining this solution would be very costly.

I have checked with method GET_ATTRIBUTE_VALUEHELP_TYPE of interface IF_WD_CONTEXT_NODE_INFO, on an attribute which i know to have a search help (Foreign key of a check table).
The method returns 'N', that is the constant IF_WD_VALUE_HELP_HANDLER~CO_VH_TYPE_NO_HELP. So, the framework was not able to find a suitable search help.
Using method GET_ATTRIBUTE_VALUE_HELP of the same interface, on the same attribute, returns me '111', which is constant C_VALUE_HELP_MODE-AUTOMATIC.
Therefore, the WD framework knows it has to automatically detect a value help, but fails to find one.
Also, this means in my opinion that the ALV and the dynamic external mapping are not the culprits: since node creation, no help is detected for any attribute but the date. Honestly, I don't have a clue on what's happening.

Tax with the help of idoc and EDI

Dear gurus,
how can we process tax data that is used between two systems through the help of IDOC and EdI? It would be great for ur kind support.

Hi Amit,
I do not understand how a non-sap system having an idoc adapte?
Do you mean the non-sap system has the ability to understand the IDOC files?
If yes, then your scenario is typically a IDOC-to File scenario.
Read this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
If you do not intend to use XI in between, then you can just configure the outbound IDOCs in your SAP system and configure a file port in we21 transaction and create the partner profile in we20 transaction.
Regards,
Ravi

Help on cdc and pp

Similar Messages

Maybe you are looking for