HELP !! only one ASM instance  up at any given time on a 2 node RAC cluster

OS: Solaris 10
Oracle: 10.2.0.4
Problem: Installing ASM, dbca hangs, and errors out with End of communication channel.
Only one ASM instance can be brought up at any given time
PLEASE HELP !!!!
- nk

alert log
======
Thu Oct 1 23:09:54 2009
lmon registered with NM - instance id 1 (internal mem no 0)
Thu Oct 1 23:09:54 2009
Reconfiguration started (old inc 0, new inc 12)
ASM instance
List of nodes:
0 1
Global Resource Directory frozen
Communication channels reestablished
Thu Oct 1 23:24:59 2009
Errors in file /oracle/admin/+ASM/bdump/+asm1_lmon_1999.trc:
ORA-00481: LMON process terminated with error
Thu Oct 1 23:24:59 2009
LMON: terminating instance due to error 481
Thu Oct 1 23:24:59 2009
System state dump is made for local instance
Thu Oct 1 23:24:59 2009
Trace dumping is performing id=[cdmp_20091001232459]
Thu Oct 1 23:25:00 2009
Instance terminated by LMON, pid = 1999
Thu Oct 1 23:25:03 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 bge1 192.168.10.0 configured from OCR for use as a cluster interconnect
Interface type 1 bge0 10.134.246.32 configured from OCR for use as a public interface
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /oracle/product/10.2.0/db_1/dbs/arch
Autotune of undo retention is turned off.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
large_pool_size = 12582912
instance_type = asm
cluster_database = TRUE
instance_number = 1
remote_login_passwordfile= EXCLUSIVE
background_dump_dest = /oracle/admin/+ASM/bdump
user_dump_dest = /oracle/admin/+ASM/udump
core_dump_dest = /oracle/admin/+ASM/cdump
asm_diskgroups =
Cluster communication is configured to use the following interface(s) for this instance
192.168.10.1
Thu Oct 1 23:25:03 2009
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=17923
DIAG started with pid=3, OS id=17925
PSP0 started with pid=4, OS id=17927
LMON started with pid=5, OS id=17929
LMD0 started with pid=6, OS id=17931
LMS0 started with pid=7, OS id=17933
MMAN started with pid=8, OS id=17937
DBW0 started with pid=9, OS id=17939
LGWR started with pid=10, OS id=17941
CKPT started with pid=11, OS id=17943
SMON started with pid=12, OS id=17945
RBAL started with pid=13, OS id=17955
GMON started with pid=14, OS id=17957
Thu Oct 1 23:25:04 2009
lmon registered with NM - instance id 1 (internal mem no 0)
Thu Oct 1 23:25:04 2009
Reconfiguration started (old inc 0, new inc 14)
ASM instance
List of nodes:
0 1
Global Resource Directory frozen
Communication channels reestablished
Thu Oct 1 23:40:09 2009
Errors in file /oracle/admin/+ASM/bdump/+asm1_lmon_17929.trc:
ORA-00481: LMON process terminated with error
Thu Oct 1 23:40:09 2009
LMON: terminating instance due to error 481
Thu Oct 1 23:40:09 2009
System state dump is made for local instance
Thu Oct 1 23:40:09 2009
Trace dumping is performing id=[cdmp_20091001234009]
Thu Oct 1 23:40:10 2009
Instance terminated by LMON, pid = 17929
Thu Oct 1 23:40:12 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 bge1 192.168.10.0 configured from OCR for use as a cluster interconnect
Interface type 1 bge0 10.134.246.32 configured from OCR for use as a public interface
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /oracle/product/10.2.0/db_1/dbs/arch
Autotune of undo retention is turned off.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
large_pool_size = 12582912
instance_type = asm
cluster_database = TRUE
instance_number = 1
remote_login_passwordfile= EXCLUSIVE
background_dump_dest = /oracle/admin/+ASM/bdump
user_dump_dest = /oracle/admin/+ASM/udump
core_dump_dest = /oracle/admin/+ASM/cdump
asm_diskgroups =
Cluster communication is configured to use the following interface(s) for this instance
192.168.10.1
Thu Oct 1 23:40:13 2009
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=26086
DIAG started with pid=3, OS id=26088
PSP0 started with pid=4, OS id=26090
LMON started with pid=5, OS id=26092
LMD0 started with pid=6, OS id=26094
LMS0 started with pid=7, OS id=26096
MMAN started with pid=8, OS id=26100
DBW0 started with pid=9, OS id=26102
LGWR started with pid=10, OS id=26112
CKPT started with pid=11, OS id=26114
SMON started with pid=12, OS id=26116
RBAL started with pid=13, OS id=26118
GMON started with pid=14, OS id=26120
Thu Oct 1 23:40:13 2009
lmon registered with NM - instance id 1 (internal mem no 0)
Thu Oct 1 23:40:14 2009
Reconfiguration started (old inc 0, new inc 16)
ASM instance
List of nodes:
0 1
Global Resource Directory frozen
Communication channels reestablished

Similar Messages

  • How to open multiple sql files in only one ssms instance

    how to open multiple sql files in only one ssms instance, I can't get anything to work that I find online..I hope you can help us.

    I tried opening two files but selecting and hitting enter. it opens one SSMS and two tabs.
    Balmukund Lakhani
    Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    This posting is provided "AS IS" with no warranties, and confers no rights.
    My Blog |
    Team Blog | @Twitter
    | Facebook
    Author: SQL Server 2012 AlwaysOn -
    Paperback, Kindle

  • JMS Queue working with only one AIA instance.

    Hi,
    We are having a Web-Logic JMS Queue configured for an instance. I have developed a consumer in AIA instance to pull the messages from the Queue.
    And this works fine.
    Now I have an another instance consumer which is pointing to the same Queue, but it fails to get the messages from it.
    I have switched off the consumer in the FIRST instance, but even then consumer from the SECOND instance was not able to pull the messages.
    Later, I tried switching on the consumer of the FIRST instance, and all the messages were pulled in this instance.
    So how can I make it work with two AIA instances and one JMS Queue, provided only one AIA instance consumer is active at a time.
    Thanks in Advance.
    Regards!

    * Likely your best bet is to check your server logs for "Error" and "Warning" messages, and/or, since these questions are specific to AIA's usage of JMS, post your questions to the AIA newsgroup.
    * WL JMS does not impose a limit on the number of consumers on a queue, but it does only allow one named connection with the same "client id" to connect at a time. Its unusual to name connections in queueing applications, but possible - and AIA may be doing this. (If this is the problem there should be "client id in use" style log messages or exceptions.)
    * Another possibility is a misconfiguration of your remote consumer. Make sure the URL is correct, and remember, if an application is running in the same cluster as the remote destination, don't specify a URL.
    * Also, if the remote consumer is running in a different domain, make sure the domains are named differently, and that no two JMS servers in the two domains have the same name (as per the unique naming restrictions documented in the Best Practices section of the JMS configuration guide -- http://download.oracle.com/docs/cd/E14571_01/web.1111/e13738/best_practice.htm#CACJCGHG ).
    Regards,
    Tom

  • Help while creating ASM instance on rac environment on Linux

    Help while creating ASM instance on rac environment on Oracle enterprise Linux 4 x84_64 Update 5 (10g2).
    a) Installed ASMLib 2.0 Packages
    b) Configured and Loaded the ASMLib 2.0 Packages
    c) Created ASM Disks for Oracle
    d) I can see, three volumes already defined for ASM file system.
    By running following command (on both node), I get following that means disk are detected.
    /etc/init.d/oracleasm listdisks
    VOL1
    VOL2
    VOL3
    But Disk members not displayed for creating disk groups. I even tried to "Change Disk Discovery Path" button and put "ORCL:VOL*" but still no luck.
    Someone told me use, use ADD DISKS button but this button is disabled for me.
    Can anyone, please help me if I missing something.

    *****SOLVED******
    Thanks for reply..
    I set the Change Disk Discovery Path" to /dev/oracleasm/disk/* instead of "ORCL:VOL* and this worked for me.

  • Only one Airport Express will work at any given time

    Hi,
    I use one Airport Express to connect to the internet and another to stream iTunes to my Stereo.
    I can only get one to work at any given time!
    If I use Airport SetUp Assistant to reconfigure the one that isn't working, it starts and the other stops.
    I can only ever see the current one in Airport Admin Utility.
    Airport SetUp Assistant shows me two.
    What's up?
    Best regards,
    Ronnie
    OSX.4.7
    iMacG5 & MacBook   Mac OS X (10.4.7)  

    Have a look here and read it carefully.
    http://docs.info.apple.com/article.html?artnum=107454
    Cheers Don

  • Only one Application can be created at a time?

    We are using enhanced model of SAP-WCM and are in the EHP6 version. We have additional applications, in addition to main application. We do not use Work permit.
    Our users are creating work approval, applications & WCDs, manually as well as automatically from PM order. During manual creation of an application, if the user selects more than one options, system gives error and allows only one application to be created at a time. If more than one applications are required, he has to create them one by one. Similarly, in automatic creation of WCDs, if there is requirement of additional applications, users have to create additional applications manually.
    Our problem is that the user often creates only one application or goes with the auto created applications & WCD, ignoring the requirement of additional applications. We wish that somehow if system can force the user to create additional applications required for a particular job and does not allow to prepare or issue the WCM objects until all required applications are created. For this it is required to first identify which applications to be created.
    Our suggestion is, when we go for creation of application, it gives option to select type of applications with check-boxes. All the check-boxes should appear 'checked' by default and user has to 'uncheck' the application(s) not required for the particular job, before pressing OK button. On pressing the OK button, these choices must be stored in some table from where the system keeps track and prompts the user, until all the applications are created.
    The experts in WCM are requested to advise if this requirement could be met in our present configuration of WCM. Is it possible using work permit? If yes, how can we implement work permit?
    Regards,
    M.S.Sachan
    ERP-PM Core team

    This forum is intended for questions about old, pre-G3 hardware, and doesn't get much traffic. Hence it's not the place where you'll be most likely to get help with your problem. I'd suggest you ask this question in the Mac OS X 10.5 forum; you'll be more likely to get assistance there.
    Regards.

  • Unable to open firefox - get message that " a copy is already open and only one copy can be open at a time. I have dragged the app to the waste basket and downloaded another firefox app. However same result". I have a IMAC , V.10.6.3.

    Unable to open firefox - get message that " a copy is already open and only one copy can be open at a time. I have dragged the app to the waste basket and downloaded another firefox app. However same result". I have a IMAC , V.10.6.3.
    I get above message when I click on the firefox icon.

    This worked, I used the method described in this link http://forums.mozillazine.org/viewtopic.php?t=365156, and opened the Mozilla profile screen with the terminal on my mac, using the language given in the links. Then I duplicated my original profile to save the bookmarks, etc. Put them in a folder listed Duplicate profile with the date. With the open profile screen, I deleted my original profile, created new profile folder and then a new profile. Note that profile cannot be created in the system library, it must be created on the disc, because the library will not allow writing into it. After I created my new profile folder, I dragged all my old information into it, and it worked. Firefox closed and the error disappeared. You must be VERY careful to make sure Firefox is closed anytime you are doing anything with the profile folders. I think that is what caused my original problem.

  • Multiple databases/instances on 4-node RAC Cluster including Physical Stand

    OS: Windows 2003 Server R2 X64
    DB: 10.2.0.4
    Virtualization: NONE
    Node Configuration: x64 architecture - 4-Socket Quad-Core (16 CPUs)
    Node Memory: 128GB RAM
    We are planning the following on the above-mentioned 4-node RAC cluster:
    Node 1: DB1 with instanceDB11 (Active-Active: Load-balancing & Failover)
    Node 2: DB1 with instanceDB12 (Active-Active: Load-balancing & Failover)
    Node 3: DB1 with instanceDB13 (Active-Passive: Failover only) + DB2 with instanceDB21 (Active-Active: Load-balancing & Failover) + DB3 with instanceDB31 (Active-Active: Load-balancing & Failover) + DB4 with instance41 (Active-Active: Load-balancing & Failover)
    Node 4: DB1 with instanceDB14 (Active-Passive: Failover only) + DB2 with instanceDB22 (Active-Active: Load-balancing & Failover) + DB3 with instanceDB32 (Active-Active: Load-balancing & Failover) + DB4 with instance42 (Active-Active: Load-balancing & Failover)
    Note: DB1 will be the physical primary PROD OLTP database and will be open in READ-WRITE mode 24x7x365.
    Note: DB2 will be a Physical Standby of DB1 and will be open in Read-Only mode for reporting purposes during the day-time, except for 3 hours at night when it will apply the logs.
    Note: DB3 will be a Physical Standby of a remote database DB4 (not part of this cluster) and will be mounted in Managed Recovery mode for automatic failover/switchover purposes.
    Note: DB4 will be the physical primary Data Warehouse DB.
    Note: Going to 11g is NOT an option.
    Note: Data Guard broker will be used across the board.
    Please answer/advise of the following:
    1. Is the above configuration supported and why so? If not, what are the alternatives?
    2. Is the above configuration recommended and why so? If not, what are the recommended alternatives?

    Hi,
    As far as i understand, there's nothing wrong in configuration except you need to consider below points while implementing final design.
    1. No of CPU on each servers
    2. Memory on each servers
    3. If you've RAC physical standby then apply(MRP0) will run on only one instance.
    4. Since you are configuring physical standby for on 3rd and 4th nodes of DB1 4 node cluster where DB13 and DB14 instances are used only for failver, if you've a disaster at data center or power failure in entire data center, you are losing both primary and secondary with an assumption that your primary and physical standby reside in same data center so it may not be highly available architecture. If you are going to use extended RAC for this configuration then it makes sense where Node 1 and Node 2 will reside in Datacenter A and Node 3 ,4 will reside in Datacenter B.
    Thanks,
    Keyur

  • All connections are connecting to 2nd node only in a 2 Node RAC Cluster

    Hello,
    I have a 10.2.0.3 database on a two node RAC Cluster with only one service configured. This service set to be preferred on both nodes.
    However, all the connections are falling on Node2 only. Any idea where to look.
    $> srvctl config service -d PSDB
    psdbsrv1 PREF: psdb1 psdb2 AVAIL:
    Thanks,
    MM

    Application is using the following connection string.
    jdbc:oracle:thin:@(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST = PQ2-PS-db-01-vip)(PORT = 1521))(ADDRESS = (PROTOCOL = TCP)(HOST = PQ2-PS-db-02-vip)(PORT = 1521)) (LOAD_BALANCE = yes) (CONNECT_DATA =(SERVER = DEDICATED)(SERVICE_NAME = PSDBSRV1)(FAILOVER_MODE =(TYPE = SELECT)(METHOD = BASIC)(RETRIES = 180)(DELAY = 5))))
    --MM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Total of the number of stock lines held in storage at any given time

    Hi Experts,
      Is there a transaction we could use that will quickly give us a total of the number of stock lines held in storage at any given time? can anyone please advise
      Many Thanks

    Solved.
    SE16 and table LQUA or LAGP. LAGP is more logical but takes longer to generate the result.
    Regards
    Simon

  • Help only one usb detected on msi kt3 ultra2 ms 6380e on any version o

    i have a problem my specs are here:
    MSI KT3Ultra2 MS6380E
    Bios Ver. 5.6
    Memory 768 Megs Pny ddr Sdram
    Sound- On board
    harddisk- Maxtor 60 gig ata 133
    cd burner 52X24X52 Memorex
    when i install any version of windows it dont matter all it does it detect only one of my usb ports i dont know why but it Sux! please help me.

    Hi,
    Check in the BIOS if all ports are enabled.

  • Synchronize MII transaction - only one running instance at a time

    Hello,
    I have a scenario where I use an MII transaction triggered by PCO, and it may be the case that the same PCO notification triggers this transaction twice within a very short time, i.e., the second transaction instance starts its execution before the first instance has finished. But I really need to make sure that those calls are done one after the other and that they do not overlap.
    What is the best way to achieve this? Which MII technologies can I use? I do not want to use message services and schedule a job that handels the requests one after the other - I need real time action and  in this case I would need to schedule the Job every second. Im really looking for a kind of semaphore/mutex solution to make sure that the MII transaction call can be fired by PCO and in case the previous transaction call is still running, the current one should wait until the previous one has finished.
    Thank you for your input and ideas!
    Best Regards,
    Matthias

    Hi Steve,
    1. The PCO notification will be triggered when a PLC counter increases (which is actually the trigger that another piece has been produced on one of our production lines) - this happens in average every 10 to 15 seconds, but due to some special setup it can be the case that 2 or 3 consecutive pieces come out at the end of the line immediately one after the other, followed by a larger pause.
    2. The expected duration of the MII transactoin will be approx. 2 to 3 seconds.
    3. The exact software versions we use are PCO 2.1.6.1 and MII 12.1.9.123.
    to be precise, the serialization of the transactiona does not need to be for all instances, but only for instances of the same production line, i.e., transactions of different lines may run at the same time, but for a single production line the transaction calls must not overlap.
    The reason is the following: We want to implement a "difference posting" of produced pieces: each PCO message holds the  PLC counter value, and in the MII transaction I want to refer to the counter of the previously produced piece. If the difference is one, everything was OK, one additional piece needs to be recorded in the system. If the difference is greater than one (for the sake of example, lets say 3) I will record 3 new pieces in the system, and if the difference is less than one (wrong order in message delivery, should normally not happen) I will simply ignore the message. This gives us the possibility to not lose data during a PCO outage: PCO is up until PLC counter value 10, is down from PLC counter value 11 to 15, and comes back at PLC counter value 16. When I process the message with counter value 16, I will see that the last processed piece was for counter value 10, therefore I need to create 6 pieces - the 5 I have "lost" plus the current one.
    To be able to safely refer to the previously produced piece, there must not be any parallel transaction executions, since then maybe two instances read the same "previous counter" and therefore mess up the collected data.
    I hope this gives you an idea what I want to achieve.
    Best Regards,
    Matthias

  • Intel I7 920 / only one core is working (?) Any idea?

    Hello all,
    I have a problem with my rendering. when I render with after, only one of the core's works (picture).
    working with:
    windows xp pro sp3 en
    adobe creative suit cs4
    my pc:
    intel core i7 920 2.67 GHz
    memory: 3 gb ddr3 (667MHz)
    card: Nvidia GeForce GTX 280 (1024 MBytes)
    Any idea what is wrong? ..Or recommended settings for better rendering (?)

    Dear Mylenium,
    First of all, thanks for your quick reply on my previews post.
    BUT, after reading a lot and watching the videos of Video2brain, I realized that everybody is talking about cs5. As I posted before... I have sc4. When I preview something in after ALL of my cores are working in order to render my preview. When I render my project things are different. Again I have the picture of 1 core rendering.
    Can I do something about that? Or, if I wanna use all of my cores I have to upgrade to cs5?
    Thank you in advanced

  • Locking a JSP Page i.e allowing only one user to access it at a time

    Hi,
    I have web application where multiple users can log in at the same time.
    I have a JSP where a user is presented with a list of executable items.It is quite possible that at the same time more that one user tries to execute the same item.I want to disable this. i.e at a time only one user should be able to execute the item.
    Currently what i can think of is putting an extra column in the database...saying that this item is locked and you cannot access it until unlocked.But then this would involve a round trip to database.I want to avoid it, and do some coding in java code itself.
    But i dont know how to proceed.
    Any Help......

    sorry for the misdirection :(
    yes..try using the synchronizing for the run process for of the item in the action class.
    I shall try to provide you with the code changes, if can you please provide the back end code doing the job u said

  • Two Macs - only one can connect to Airport at a time

    Starting today, after 10 days of successful operation, when I came home I couldn't connect to my home (new "square" Airport Extreme) network with my Core 2 MacBook Pro. My wife was happily connected on her PowerBook G4.
    Puzzled, I tried a few obvious things:
    Airport OFF, Airport ON ... no joy
    Logout and back in ... no joy
    Restart ... no joy
    Then I turned my attention to the Base Station:
    Restart ... nope
    Change to "None" security ... nope
    Change back to "WPA Personal" ... nope
    Humbled, I stopped and had dinner. My wife's G4 went to sleep, my Intel went to sleep. Now it gets interersting! My Intel woke up first and immediately joined the network -- I'm happy till I hear my wife say SHE can't get connected.
    To make a long story short, I have two laptops on my desk, and only one can connect at a time! This is BIZARRE. Turn off Airport on either one and its buddy gets a connection immediately, and vice versa. Sleep the connected one and the other connects.
    I am out of ideas.
    Errors on the G4:
    Feb 28 20:09:45 localhost configd[35]: WirelessConfigure: 88001003
    Errors on the MBPro:
    various 88001006 errors as reported by others in this forum.
    Both Machines at all the latest updates; the MBPro has the new Extreme software installed from the CD that came with the new hardware.
    I would welcome suggestions ...
    MacBook Pro Core 2   Mac OS X (10.4.8)  
    G4 Cube   Mac OS X (10.4)  

    Software Update is not offering me any Airport updates on the G4 (or the Intel).
    The recent Airport Update, "AirPort Extreme Update 2007-001", is of course only for Intel Macs.
    They could only be "trying to use the same IP address" if they were not configured to use DHCP, but they are configured to use DHCP, and whichever connects does get an address in the 10.0.1.[2-200] range so I think that's not the problem.

Maybe you are looking for

  • Connecting MacBook to PCs

    I just purchased my first Mac, a Macbook Pro, running Leopard 10.5.4. I also have 2 PCs at home which I use also. I use the one basically for storage, while I work off of the other. My problem is that I set up all three and they all work fine, connec

  • Acrobat 9.5.2 Update virus threat

    AVG identifies PrintInf64.exe as a virus threat. Should I quarantine or delete it? Is the update safe?

  • Archiving FI Park Document

    Hi All, Can please advice how to archive FI park document? Does it need to be cleared first so that it can be archived? Thanks, CW

  • Safari downloads gif images for no reason

    When I visit this site www.jsonline.com some gif images are automatically downloaded (called p-01-OVlaSjnOLG.gif). Every click results in a download. How do I stop this? Safari version 4.0.4, running on OS X 10.5.8. Lots of space on hard drive.

  • Burned CD volume level too low

    I have noticed that CDs burned with GB are at a lower volume level than commercially recorded CDs. The GB master volume is as high as I dare go without constant peaking. Can this be adjusted some other way?