Help! PCI Communications controller and network controller

please tell me what to download,heres my ids:
PCI:
PCI\VEN_8086&DEV_3B64&SUBSYS_3658103C&REV_06
PCI\VEN_8086&DEV_3B64&SUBSYS_3658103C
PCI\VEN_8086&DEV_3B64&CC_078000
PCI\VEN_8086&DEV_3B64&CC_0780
Network COntroller:
PCI\VEN_8086&DEV_0084&SUBSYS_13158086&REV_00
PCI\VEN_8086&DEV_0084&SUBSYS_13158086
PCI\VEN_8086&DEV_0084&CC_028000
PCI\VEN_8086&DEV_0084&CC_0280

When requesting assistance, please provide the complete model name and product number (p/n) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please see How Do I Find My Model Number or Product Number? for more assistance locating this information. DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
In addition to the above requested information, please provide the name and bit version of the operating systemyou require drivers for.
PCI\VEN_8086&DEV_3B64&SUBSYS_3658103C&REV_06 = Intel Management Engine Interface
PCI\VEN_8086&DEV_0084&SUBSYS_13158086&REV_00 = Intel(R) WiFi Link 1000 BGN (Please select the correct driver for your OS)
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

PCI Device and Network Controller uninstalled

Having problems with downloading a pci device and network controller driver for presario cq57? Need help. my hardware id is PCI\VEN_10EC&DEV_5209&SUBSYS_3577103C&REV_01

Hi:
You need to install the Realtek Card Reader driver from your notebook's support and driver page for the PCI device.
Please do the following so I can find out what model wireless card your model uses...
Go to the device manager, find the Other Devices category, and click on the Network Controller needing drivers.
Then click on the Details tab at the top of the network controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that and select the second item on the list (Hardware ID's).
Post the top string of characters that begin with PCI\VEN.

PCI devices and network controller

Hi there can anybody tell on hoe to install the PCI device driver and the network controller please as these two devices is marked with an ? in the devices managers windows
Thanks

Subject: Re: PCI devices and network controller (Satellite SM 30 X-165)
Good morning
I have a problem i bougt a laptop in china but to translate it thay reprogramed everything and my modem was desinstaled, i dont exactly know which model it is, its a toshiba satellite and the mothem comes whit a ? (yellow question marc) and the name it apears is modem PCI
could you help me
Message was edited by: andres_pedroza

T42 Ethernet and Network controller problems

I am fairly new to computers and obtained a T42 for my grandson. Please bear with me as I am rather Techno challenged and battled now for 2 days getting internet connection. Had to do a clean XP SP2 installation and landed up with a host of Other devices issues with Yellow Question marks. Have downloaded most drivers from http://support.lenovo.com/en_US/downloads with various success. Need serious help here please.
In Device manager I am sitting with two unresolved issues under Other Devices
Ethernet Controller PCI\VEN_14E4&DEV_167D&SUBSYS_05771014&REV11\4&111A1FD8&0&00E0
AND
Network Controller PCI\VEN_8086&DEV_4224&SUSYS_1011808&REV_05\4&AD1B67F&0&10F0
I have downloaded various drivers but still cannot get them to work. Not sure which of the drivers to use.
In another forum somebody replied
The Intel PRO/1000 is an ethernet controller. Once you get that installed and establish a network connection, you can download and install MS dotnetfx and Lenovo System Update which will download and install all the other drivers automatically. Or just download them yourself and manually install them.
Not very helpful as I could not figure ou thow to install as the drivers that I downloaded did not fix this and no further help from them when I questioned this
Please if someone here will give us some step by step directions. The model is 2373-L77 if that will help
Solved!
Go to Solution.

raycomp schrieb:.
Ethernet Controller PCI\VEN_14E4&DEV_167D&SUBSYS_05771014&REV11\4&111A1FD8&0&00E0
AND
Network Controller PCI\VEN_8086&DEV_4224&SUSYS_1011808&REV_05\4&AD1B67F&0&10F0
I have downloaded various drivers but still cannot get them to work. Not sure which of the drivers to use.
Checked the "DEV_" # on www.pcidatabase.com
upper: Broadcom NetXtreme Gigabit Ethernet driver (it seems, you have a T43-System Board in your T42 or you have a T43).
lower: 802.11a/b/g WLan adapter driver (Intel 2915 Wireless LAN adapter)
Please find the installation instructions on the linked pages. Executing the downloaded packages extracts them only to C:\DRIVERS\WIN\xxx.
Starting there you'll need to execute the setup as described on the download page.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Unable to install lan realtek rtl8101 and network controller driver on windows server 2008

Hi Guys,
i am trying to install realtek rtl 8101 f amily driver and network controller driver on windows server 2008 but unable to install.
Hp device Model.:- hp pavilion g4 1303au
Model no.:- 5c03213jsh
network controller Device ID: PCI\VEN_168C&DEV_0032&SUBSYS_1785103C&REV_01\4&211965BF&0&0020
Name: PCI Device
Device ID: PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C&REV_01\4&34BC5A71&0&0030
Name: SM Bus Controller
Device ID: PCI\VEN_1022&DEV_780B&SUBSYS_3564103C&REV_13\3&2411E6FE&0&A0
thanks,
Amit Rai

Hi:
SMBus controller:
Here is what I have done...I have zipped up and attached below under Attachments, the raw smbus controller driver files for you to unzip and manually install.
Download and unzip the file.
Go to the device manager and click on the smbus controller needing drivers. Click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
Make sure the Include Subfolders box is checked and the driver should install. Then reboot.
Ethernet: Download and install the 1st driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
Card reader (PCI dev.): Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
Wireless: You will have to try the Vista driver for the Atheros wireless card...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
Attachments:
sp66185.zip ‏7 KB

Replaced hard drive need ethernet and network controller

Hello
I replaced the hard drive on my satellite L655. I installed windows and used my existing key code. The laptop is telling me I have no ethernet and network controller. I have tried to find the correct drivers. Since I am starting the computer from scratch do I need to install other drivers as well? Please help.
Thanks
Heidi
Solved!
Go to Solution.

I'm so sorry, Heidi. I misread your first message. I thought you had restored the hard disk to its original out-of-the-box contents using Toshiba recovery media.
That's the best thing to do. All the drivers and utilities are properly preinstalled. Windows is preactivated.
If you failed to burn recovery discs, you can obtain them from Toshiba. Scroll down to Get Recovery Media here .
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 71 of the User's Guide.
Satellite L640/L650 Series User’s Guide
If you have problems with drivers after doing that, see my previous message.
-Jerry

In which situvation you will use interface controller and custom controller

in which situvation you will use interface controller and custom controller?

Hi rafi,
Custom Controller Custom Controller is as same as the component controller, here we can write the business logic.
Custom Controller means developer can create multiple controller denpeing up work.
By using component controller we cant create multipule contrllers. when we create the DC that time it will be created automatically.
Please look at this [Link|http://help.sap.com/search/highlightContent.jsp]
interface controller
Communication between two componets by using interface controller.
Please look at this [ Thread|Commmunication Between two Components;
Regards
Vijay Kalluri

Diff between Component controller,Custome controller and View controller

hi,
Can any body tell me the following details,
1.difference between the Component controller,Custome controller and View controller in WD-ABAP.?
2.what is Lead Selection?
Regards,
Ravi

Hi Ravi.
The component controller is visbile to all views in a component. So all context nodes and methods you create here can be accessed from all views in the component. This way you can share data between the views by mapping context nodes or thru method calls. You can also mark methods and nodes as interface so that they are acessable from other components that define component usages to this cmponent.
Custom controller is quiet similar to the component controller. You can define it if you want to group some views with a custom controller for a certain functionality.
If you want to access a custom controller in a view you have to define the usage first on the properties tab of the view.
A view controller is only visible in the view itself. So all methods or context nodes you define here are only accesable by the current view.
The lead selection is in most cases the current selected element in a context node. The lead selection is used by many UI elements to determine which element has to be shown (e.g drop down).
If you have a table with single selection the current selected table row is the lead selection element of the bound context node.
SO you can get the lead selection element easily in any mthod by calling context_node->get_element( ).
Hope this clears your questions.
Cheers,
Sascha

Difference between custom controller and component controller

Hi All,
I am a beginner in CRM SAP .
Please can anyone tell me whats the difference between custom controller and component controller with some scenario.
I am totally baffled.
Thanks in advance.
Regards
Shilpi

Hi Shilpi,
The main difference between custom and component controller is the role which they play during data transfer.
a) Custom controller is used for data transfer across two views within a component. For that you need to bind view context nodes to custom controller either through wizard or manually by adding the code in CTXT class create_contextnode method:
initial setting for depandant model node
    coll_wrapper =
      BTADMINH->get_collection_wrapper( ).
    TRY.
        entity ?= coll_wrapper->get_current( ).
      CATCH cx_sy_move_cast_error.
    ENDTRY.
    IF entity IS BOUND.
      BTOpportH->on_new_focus(
                   focus_bo = entity ).
    ENDIF.
b)Component controller is used for data transfer across two views in two different components. For this, we need to define the component usage first and then bind the context nodes in the method-WD_USAGE_INITIALIZE of the Component Controller impl class.
    WHEN 'ComponentUsageName'.
      iv_usage->bind_context_node(
                  iv_controller_type = cl_bsp_wd_controller=>co_type_custom
                  iv_target_node_name = 'ContextNodeName' "#EC NOTEXT
                  iv_node_2_bind      = 'ContextNodeName' ). "#EC NOTEXT
Hope this clears some of your doubts!
Thanks and Regards,
Rohit
P.S-This is valid for CRM 2007.Raghu is also right because Interaction Center is made up of different different components combined together.You have put your question in wrong forum.

What is the difference between Custom controller and context controller?

Hi Gurus,
What is the difference between Custom and context controller?
In which occasion we should prefer to use Custom Controller?
Thanks in Advance,
Dharani

You mean difference between custom controller and component controller???
if yes...
its been discussed many times.... just go through these threads, you will be clear
custom controller vs component controller
Component Controller and Custom comtroller
[ why we need Custom controllers in Model Applications |why we need Custom controllers in Model Applications;
[CONTROLLER AND CONTEXT|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/944ea9e5-0601-0010-65b3-b49a56eb6385]
Pradeep
Edited by: pradeep bondla on Jul 22, 2008 12:42 PM

Yellow mark - PCI Device" and "Network controller" on Satellite A100-787

There is a yellow mark in the device manager for a driver called "PCI Device" and also for "Network controller" although the network connection (LAN) is working well and all other functions of the computer seem to be working well.
What are those devices??

Regarding the LAN driver, it is installed and working properly (the wired one). The wireless driver is provided by Atheros which I installed from its own setup file and it didnt give me any error so I assume it is installed well although I havent tested the wireless connection yet. I am going to do that shortly.
As for the PCI device, the card reader is able to read Sony memory stick and one type of SD card with certain teeth arrangement but not another card with a different teeth type. I dont know why it is the case. so this remains a mistery to me.

Missing Ethernet, PCI, and Network Controller Drivers

I recently reinstalled Windows on my fiance's laptop, and now it wont connect to wi/fi. The device manager is showing that there is no drivers for the Ethernet controller, PCI Device, or Network controller. How do I fix this? Thanks!

Hi, Network controllerhttp://ftp.hp.com/pub/softpaq/sp53501-54000/sp53753.exe Ethernet controllerhttp://ftp.hp.com/pub/softpaq/sp52001-52500/sp52421.exe PCI Devicehttp://ftp.hp.com/pub/softpaq/sp52001-52500/sp52186.exe Regards

I need help, I tried everything! Network controller after installing windows 7 on a windows 8.1 machine!

Hello everyone!
I have a Dell Inspiron 3521. It had Windows 8.1 on it and I installed Windows 7 Pro OEM 64 bit. I did delete the old windows file. I was able to install all the drivers from the Dell website, but I can't seem to figure out how to get the right driver for the "Network Controller". I tried Driver Identifier and it shows me two drivers missing: 1: BCM43142A0, 2: Network Controller.
Here are the hardware IDs for the NC:
PCI\VEN_14E4&DEV_4365&SUBSYS_00161028&REV_01
PCI\VEN_14E4&DEV_4365&SUBSYS_00161028
PCI\VEN_14E4&DEV_4365&CC_028000
PCI\VEN_14E4&DEV_4365&CC_0280
I did find a post with someone having the same keys, but the driver in the link didn't help me. Maybe it's the way I installed the drivers? Or the way I installed windows 7 ?
Please help!!!

The latest Dell Driver for the Dell Wireless 1704 Card is 6.30.223.228. You may also try the later Dell Wireless 1708 card 6.30.223.245 (both are Broadcom rebundled drivers) first directly and then through the device manger.

Help! BootCamp /Win XP NETWORK CONTROLLER

I have Macbook Pro, and have installed Windows XP PRO quite long. It's working OK then after 2 month no using internet, now in window XP in prompt me to install Network Controller which i try to reinstall all BOOTcamp driver and online search for driver all not valid. even on OS lepard the wifi also gone, where to search for system hardware it state no airport found. if using ethernet no problem on internet but i need to use wireless, how to find the driver.
2nd CD Eject button (not ejecting) on Window XP
Any help would be appreciated.

Post in the Boot Camp forum:
https://discussions.apple.com/community/windows_software

Probems with msi 875p neo Fis2r and network controller driver

Hi guys just wondering if anyone could help me with my msi 875p neo FIS2R and problems with the network controller driver/network card.
I'm running xp on a computer my nextdoor neighbour gave me. I got it working fine with service pack 3 installed but then installed a bunch of windows updates last night and the computer would switch itself off before windows could start. Now I reinstalled xp and unfortunately it does not recognise the network controller/card at all now. I tried installing the intel network controller drivers but it stopped because it said no intel adapter/card was installed/present. Could anyone please help with suggestions? I tried running everest and under newtwork it doesnt list intel network adapters but I'm pretty certain it is. Again any suggestions?
--------[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]
Computer:
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 3
DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard:
CPU Type Intel Pentium 4, 2800 MHz (14 x 200)
Motherboard Name MSI 875P Neo-FIS2R (MS-6758) (5 PCI, 1 AGP, 4 DDR DIMM, Audio, Gigabit LAN, IEEE-1394)
Motherboard Chipset Intel Canterwood i875P
System Memory 1024 MB (PC3200 DDR SDRAM)
BIOS Type AMI (10/11/04)
Partitions:
C: (NTFS) 238464 MB (200326 MB free)
--------[ DMI ]---------------------------------------------------------------------------------------------------------
[ BIOS ]
BIOS Properties:
Vendor American Megatrends Inc.
Version V2.4
Release Date 10/11/2004
Size 512 KB
Boot Devices Floppy Disk, Hard Disk, CD-ROM, ATAPI ZIP, LS-120
Capabilities Flash BIOS, Shadow BIOS, Selectable Boot, EDD, BBS
Supported Standards DMI, APM, ACPI, ESCD, PnP
Expansion Capabilities ISA, PCI, AGP, USB
[ System ]
System Properties:
Manufacturer MICRO-STAR INC.
Product MS-6758
Version 00C
Serial Number 00000000
Wake-Up Type Modem Ring
[ Motherboard ]
Motherboard Properties:
Manufacturer MICRO-STAR INC.
Product MS-6758
Version 00C
Serial Number 00000000
[ Processors / Intel(R) Pentium(R) 4 Processor ]
Processor Properties:
Manufacturer Intel
Version Intel(R) Pentium(R) 4 Processor
External Clock 200 MHz
Maximum Clock 4000 MHz
Current Clock 2800 MHz
Type Central Processor
Voltage 3.3 V, 2.9 V
Status Enabled
Socket Designation FC-478
Network adapters:
Direct Parallel 5.1.2535.0
WAN Miniport (IP) 5.1.2535.0
WAN Miniport (IP) - Packet Scheduler Miniport 5.1.2535.0
WAN Miniport (L2TP) 5.1.2535.0
WAN Miniport (PPPOE) 5.1.2535.0
WAN Miniport (PPTP) 5.1.2535.0

Quote from: Jack t.N. on 14-November-09, 08:00:05
Clear CMOS with your PSU unplugged from A/C power. Then load "Optimized Defaults" in BIOS and retest.
thanks jimi... jack
will try that and post later if it worked... ive never cleared cmos, this sort of thing is relatively new to me but thanks again

Help! PCI Communications controller and network controller

Similar Messages

Maybe you are looking for