Help Please, Audio Problems

Hello, I have a satelite A205-S5804 Toshiba laptop.
My audio has stopped working for reasons unclear to me.
After already successfuly executing a system restore my sound has not returned to my laptop.
Can anyone please provide any assistance concerning this matter. Thanks.

Reinstalling Sound on computer.
Start Search >type in device manager
Device Manager > Sound, video and game controllers > right click on the item below that category and Uninstall then just push OK.
Restart your computer and the driver will be installed automatically.
Hope this will help.
oOo
*Read EULA before installing any software.

Similar Messages

  • Need help with Audio problem

    I just installed iTunes 7.3. Now when I try to run the program, I get an error: "iTunes cannot run because it has detected a problem with your audio configuation." Could someone help please?

    This is usually due to a Quicktime proble, this Apple article should help:
    http://docs.info.apple.com/article.html?artnum=304424

  • I need a professional help please "audio device problem"

    Hi guys ..
    I am facing a problem with my  audio device ... on my    HP DV5-1126em  laptop
    when I play any sound , the first part of it can't be heard .. for example , when the system start "any sound clip" .. the sound will start from the middle of the voice clip     i.e. " the first part of sound is missing" ..  but if i repeat the sound  it will play without any problem , but after  some seconds .. the problem appears  again
    I tried to update the driver but  it didn't fix the problem
    BUT when I uninstall IDT high definition  driver ,  this problem become less frequent ..  but it still  there 
    I had also  recoverd my  system , but there is no benifit .
    I noticed  when I use the head set the problem will deminish completly
    please give me your advice , it may help
    pleaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaase  help me 

    Hi,
    Download audio driver:
    IDT audio here
    Disconnect from Internet.
    Uninstall from Your system audio drivers.
    Resources:
    Uninstalling Software in Windows 7
    Uninstall or change a program in Windows 7
    Restart Your system:
    On boot press ' F8 ' and choose ' Safe mode '.
    Go to Control Panel -> Devices Manager -> Audio, Video and Games Controllers 
    and find there Audio card. Click on it with right button of Your mouse and choose uninstall driver.
    Restart Your system and this time start it in normally.
    Install downloaded audio driver.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Please help! Audio problems...internal speakers

    HI all...everytime I put headphones into my audio port, the system wont return to internal speakers once I unplug them. It stays on headphones and the built in speakers....wont work. I have to restart a number of times before it goes back.
    Any help is highly appreciated
    Kind regards
    Phil

    Interesting - after not being able to figure out ANY way to get the inputted sound to come through the speakers, I went to CD Spin Doctor 2.02 (Came with Toast), since the whole point was to input an LP and burn it. I thought I'd just do it soundlessly and hope I could edit the saved file afterward.
    CD Spin Doctor has an option to allow playback through the speakers. I clicked it and it streamed through perfectly.
    Now, it wasn't launched during all the fuss beforehand, so it being in active use isn't an issue. BUT, I suspect that it's installed something (?) that may have led to this issue.

  • Please help with audio problems, thanks!

    Hi, I'm relatively new to DVD studio Pro and so far the manual has been useful but i've run into some sound related problems. I'm a composer/sound designer and this DVD is to be my reel so these are fairly integral issues to its success.
    First, I want to add a sound effect to each of the roll over states, so one sound for the "over" and one sound for the "down" state. Currently i can only add audio as the backing track for each menu.
    Second, whilst most of the items on the dvd are movies that include my music, I also want to have a page purely of audio tracks which play when pressed without changing the page. How can i do this? The only DVD i've seen this done on is "The Thin Red Line" extras, promoting the soundtrack to the film.
    Thanks.

    Welcome to the forum/discussions CC!
    Sorry to have to inform you, but unfortunately layered menus aren't supporterd with audio in DVDSP, and technically what you're attempting is a layered menu-type function - although it just may be possible with scripts, I doubt it.
    Your second request can be done however and there's several ways to go about doing it.
    I like DVD@ccess but others would recommend a method of simply placing the audio files in the built file of the DVD making them accessible to users.
    Another method I could suggest is to make a menu page exactly like the one you want to look the same and have the song you'd like to play as the music track for that duplicated-menu in question - set the target of the link for the song in the menu to go to the menu that has that song as the music track. Repeat that for the number of songs you'd like to have this feature.

  • Need help ASAP- Audio Problem

    I am using a Vixia HV40 Canon camera with an external mic (Aazden 105 series UHF) with Final Cut Express 4.0.1 to create a video. When I listen to the audio output through the mic or the camera, everything sounds fine, but after I capture the data onto my computer, the sound comes with a very fuzzy background noise. I don't think that there is any problem with the camera or external mic (I have had a sound technician check them to see if there was something wrong with the sound), but I don't know what to do to fix the problem.
    Recently I have been getting an error message when I open FCE saying, "Unable to locate the following external devices: Built-in audio," could this have something to do with my problem? Also, why is it saying this?
    I can't seem to find anything online that relates to this problem, please help!

    Wondering why you're using the "Voice-over" tool instead of the "Capture" tool. Are you recording live audio or capturing (video and) audio from something you pre-recorded?
    Normal practice for me, in capturing stuff I've recorded on my camera, is to connect the camera to the computer (firewire cable), launch FCE, and choose "File/Capture."

  • Help please - template problems

    2 questions please - actually:
    1.  Dreamweaver CS4... I think my template functionality has somehow become corrupted.  When I try to create new templates (regardless of which site I'm trying it within), they look ok.  But when I then try to create a new html page using the template, it garbles the format.  I tried it every way I can think of... I tried the 2 column fixed, the 3 column hybrid, etc. etc.  And I tried them as is in dreamweaver (without adding any formatting or anything... just create a new, save it, and then create a new page using the tempalte).  Still the same garbled end results. (it's keeping the spry menu bar, but loses the columnar format and places them on top of each other)
    Interestingly, it's only happening with new templates. (what started this was that I have a 2 column template I'm using, and I want to switch to a 3 column).  As long as I keep using the existing format with the existing templates, the new pages are ok.
    I tried re-installing dreamweaver, and that didn't fix it.  Any ideas?
    2.  I noticed in another post, that there were comments about largers sites don't do well with templates.  My site's content based (www.howtogardenadvice.com) with no fancy bells or whistles... but am well over 50 pages, and still growing.  Does that mean I have to stop using a template?
    Thanks so much for your help!

    2.  I noticed in another post, that there were comments about largers sites don't do well with templates.  My site's content based (www.howtogardenadvice.com) with no fancy bells or whistles... but am well over 50 pages, and still growing.  Does that mean I have to stop using a template?
    When you site becomes as large as yours sounds, the initial decision to use Templates becomes tedious, since each saved Template change requires that you upload ALL affected local files to reflect that change.  As the site becomes larger and larger, this requirement becomes more and more tedious.  It's not that the Templates don't work.
    I still use Templates on nearly every site I build, but I also use server-side includes to minimize this need.  I use the following scheme....
    First, I mentally separate the page layout into three sections:
    1.  Stuff that will not change for the life of the site (i.e., the basic
    structural elements)
    2.  Stuff that *could* change from time to time (e.g., navigation elements,
    burst advertisements, section-specific navigation, etc.)
    3.  Stuff that *will* change from one page to the next
    Then I create a Template containing all class1 elements.  Next I create
    server-side include files containing all class 2 elements and place them on
    the Template as needed.  Note - some of the class 2 elements may be
    "section-specific elements", and their placement on the Template will be
    subject to the next item.  Finally, I insert editable regions to cover the
    class 3 items, INCLUDING the section-specific navigation.
    This allows me to just cookie-cut the rest of the site.  I estimate that
    even for fairly large sites, about 80% of my work goes into planning and
    creating this Template file.
    To say anything about your #1 problem, we'd need to start by looking at the code on your Template page, and comparing that to the 'garbled' code on your child pages.  Can you show us?

  • Help Please: Playlist Problem

    I recently backed up all the musics and movies I had by using the back up disc feature. I used 4 blank dvd discs to back up all of my files. After I transfered my music to another pc I use, I found very disturbing fact. My ipod has all playsits I had before, but itunes doesn't have any playlist. Every music is under the music fold. Since I have about 1500 musics, I can't even imagine to update all playlists manually. I thought that using the back up disc feature would automatically transfer all my playsits. Is this the way supposed to work or I need to change some other settings too? I don't really know what to do. Please help me to solve this problem. I'd really appreciate it.

    Welcome to  discussions!!!
    Backup just backs up the music. It doesn't back up any of your settings.
    Are you using an external HD?
    If so;
    Hold down the shift key the next time you launch iTunes. Select create library on the pop up window, and save it on your HD.
    The next step can be done in a couple of ways.
    1. Go to your music folder>iTunes>iTunes Music>right click>send to>navigate to the newly created library and select choose (or whatever windows says)
    2. Open your internal iTunes library (hold down shift key>choose library>navigate to your internal music folder>iTunes>choose) Go to iTunes preferences>advanced>general. Change your iTunes music folder location to the location of the new library on your HD: Ext. HD>iTunes> Now go to advanced and consolidate library. You'll get a message that says "consolidating your iTunes library will copy all of your music to the iTunes Music Folder." Select Consolidate
    or....
    3. Open your newly created library, file>add to library>navigate to the iTunes Music folder on your internal HD and select choose.
    There are a couple of other ways, but this should be good.

  • Help please? problems with screen resolution & external monitor

    had a look around this forum and seen many questions about screen resolution when connecting to an external monitor but unfortunately, non that help me answer my problem.
    got a brand new macbook a few months ago and today bought a HP v220 22" external monitor.
    I am new to the idea of external monitors and am unsure what i am doing wrong settings-wise. it seems that no matter what resolution i set either my macbook display, or the external monitor display to. the external monitor is still not sharp.
    Im not sure how to explain what i need but basically i need it to be so that things appear on the external the same size as they do on my macbook screen, so that i will have more space to work in on my external monitor (i am a graphics student) but at the moment what appears on the monitor is lieterally just a magnified version of my macbook screen, hence it lacks clarity.
    the highest resolution offered in the menu for my macbook screen is 1280x800 and my external is recommended to be set at 1680x1050.
    what settings should i have to get the resolution right?
    i will be so so grateful if you can help. i think ive tried every single display setting but to no avail. so please help me!

    The 13.3" screen on the MacBook running at 1280 x 800 will have a ppi (pixels per inch) of around 113. A 22" monitor running 1680 x 1050 will have a ppi of around 90. So it is natural that it will look magnified compared with the MacBook. The two displays have different a pixel pitch.
    Since there are no monitors with ~113 ppi out there in the market, what you want to do with having the same size and sharpness between the MB and a monitor will not be possible.
    If you ran the MB's screen at 1024 x 640 (not even sure if that is an available choice), then the two screens would match in terms of "magnification." But the MB isn't going to look very sharp running such a low, non-native format.

  • Could someone Help please BlueJ Problem

    Ok I am a University Student, and I am at the moment learn Java, as part of my work I have to make a sun descend like the sunset
    I have wrote the method, and got it to work, at the moment though I havent gotten it to loop, and I do not know the command for looping, could someone please tell me the command so I can add it to my program.
    The program I am using to write this is called BlueJ
    Edited by: Devilslore on Oct 7, 2007 12:55 PM

    Devilslore wrote:
    I have wrote the method, and got it to work, at the moment though I havent gotten it to loop, and I do not know the command for looping, could someone please tell me the command so I can add it to my program.You should go to the Sun basic java tutorials on loops. Have a look here at the for loop tutorial:
    http://java.sun.com/docs/books/tutorial/java/nutsandbolts/for.html
    The general tutorial index is here:
    http://java.sun.com/docs/books/tutorial/java/index.html
    The program I am using to write this is called BlueJThis has nothing to do with your problem. It is a tool to help you write java, nothing more. The program you are really using is the java compiler. In fact, in your next post here, consider having a better subject header. The one you listed suggested that this was an IDE (Integrated Development Environment) problem rather than a simple java problem. By mislabeling this header, I will bet that you cut the number of folks reading your question by more than half.

  • HELP PLEASE - BASIC PROBLEM

    Hi, I am a beginner and am stuck on a problem. Maybe you guys can help me out...
    "The intersect method computes the intersection of 2 rectangles--that is, the rectangle that is formed by 2 overlapping rectangles. You can call this method as follows: Rectangle r3 = r1 intersection(r2);
    Write a program that constructs 2 rectangle objects, prints them, and then prints their intersection"
    Thanks,
    RM

    I am still having trouble with this...and I cannot figure out why. I entered the following:
    public class Sect
    {  public static void main(String[] args)
    { Rectangle r1 = new Rectangle(10,10,40,40);
    Rectangle r2 = new Rectangle(20,20,40,40);
    Rectangle r3 = r1.intersection(r2);
    System.out.println(r3);
    I came up with the following errors:
    Sect.java:5: cannot resolve symbol
    symbol : class Rectangle
    location: class Sect
    { Rectangle r1 = new Rectangle(10,10,40,40)
    ^
    Sect.java:5: cannot resolve symbol
    symbol : class Rectangle
    location: class Sect
    { Rectangle r1 = new Rectangle(10,10,40,40)
    ^
    Sect.java:7: cannot resolve symbol
    symbol : class Rectangle
    location: class Sect
    Rectangle r2 = new Rectangle(20,20,40,40);
    ^
    Sect.java:7: cannot resolve symbol
    symbol : class Rectangle
    location: class Sect
    Rectangle r2 = new Rectangle(20,20,40,40);
    ^
    Sect.java:9: cannot resolve symbol
    symbol : class Rectangle
    location: class Sect
    Rectangle r3 = r1.intersection(r2);
    ^
    5 errors
    PLEASE HELP!!
    thanks,
    GM

  • Help Please ( Speaker Problem Only Playing Through Right)

    Can someone help me please, recently my speakers have only been playing through the right speaker, i have tryed headphones and the problem still occurs and no sound is coming out of the left speaker, i have checked all the sound settings and they are all correct.

    Greetings,
    When you turn your Mac on with either the headphones or the speakers plugged in, do you hear the startup chime "BONG!" only through one side?
    Reset the SMC and then test: http://support.apple.com/kb/HT3964
    Reset the PRAM and then test: http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
    If the issue persists at this point and those headphones work fine on another device (like an iPod) then you have a hardware issue and need service:
    -- Contact a local Apple Authorized Service Provider: http://support.apple.com/kb/HT1434
    or
    -- Book an appointment at an Apple Retail Store: http://www.apple.com/retail/
    or
    -- Contact Apple: http://www.apple.com/support/contact/
    Hope that helps.

  • Help please ~ sound problems with menus in iDVD

    I launch iDVD from within iMovie. Then I start to personalise the menus.
    But the menu screens although showing the chapters only give a loop duration of between 00:00 and 13:30 seconds.
    Every time whenever I import QuickTime dv. files (made in iDVD 5 to avoid the dreaded rise in volume at the end) the sound in iDVD is grotesquely distorted.
    Each of the QuickTime dv. movies last 10 seconds.
    I don't know what I'm doing wrong! Please help!!

    Thanks John Beatty of Maryland for responding. But I think I'll need to post my question again in hopes that someone else will recognise my difficulty.
    I was hoping for a solution.
    The distortion in audio occurs during the process of DESIGNING my DVD ~ I don't get as far as previewing.
    It's only occurring in one screen (or menu). Although my QuickTime dv. file lasts only 10 seconds (in this case) and should therefore fit within a 13 and a half second limit, it shouldn't be offering me such a short time frame ~ normally it's quite a bit more ~ 51 seconds, is it? ~ and you move the slider back to the time you require for the dv. movie to loop.
    But thanks anyway, John. Someone else might recognise my difficulty.

  • URGENT help please. Problem creating Chinese language text field in Adobe LiveCycle.

    A client requested to create an employee details form in which few text fields has to be in Chinese language. I selected "Arial Unicode MS" for that fields. In final PDF I am able to insert text in Chinese text fields in Acrobat. But I cant insert text when i opened the final PDF in Adobe Reader. (only these Arial Unicode MS fields are disabled). All other fields (English) are in Arial font., they are working in both (Acrobat and Reader). As these forms will be distributed to people who may don't have Acrobat and only the Free Adobe Reader. Can someone please advice me how to solve this problem.
    Thank you
    - Amal

    Make sure the format of the date strings provided by the calendar is what you are expecting. Or use the "formattedValue" for the input strings.

  • HELP;;PLEASE,,,,BIG PROBLEM

    Hallo,, I'm new in this forum,,
    I need an help for a big problem,
    suddenly after having download a big image from an email of a friend,,my IMAC is not able to connect to web pages with any browser,,but the line is working because the mail is working in this mac and everythings works with other PC connected at the same router.
    then I tried to reinstall Panther from original disc,,,and now is worste then before because many softwear doesn't work if I don't update the 10.3 to 10.3.9 (as I had before the reinstall) but I can't do that because it is impossible to access to any web site,,,
    I don't know what to do,,
    someone has any idea and can help me???
    thanksss,,bye bye
    Mac OS X (10.3.9)
      Mac OS X (10.3.9)  

    inapalm:
    Let's start with the attempt to re-install.
    1. Did you make a backup of all you can't afford to lose?
    2. What install option did you use to re-install?
    3. After the re-installation, does everything except the internet work properly?
    4. What browser are you using?
    While I await your response tot he above, try this:
    Boot from your Panther install disk holding down the "C" key.
    Go to the Installer menu and launch Disk Utility.
    Select your HDD (manufacturer ID) in left panel and First Aid in main panel.
    Click on Repair. If Disk Utility reports no errors, quit DU.
    If DU reports errors click Repair again and again until DU reports the disk has been repaired.
    If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
    Good luck.
    cornelius

Maybe you are looking for