HELP;;PLEASE,,,,BIG PROBLEM

Hallo,, I'm new in this forum,,
I need an help for a big problem,
suddenly after having download a big image from an email of a friend,,my IMAC is not able to connect to web pages with any browser,,but the line is working because the mail is working in this mac and everythings works with other PC connected at the same router.
then I tried to reinstall Panther from original disc,,,and now is worste then before because many softwear doesn't work if I don't update the 10.3 to 10.3.9 (as I had before the reinstall) but I can't do that because it is impossible to access to any web site,,,
I don't know what to do,,
someone has any idea and can help me???
thanksss,,bye bye
Mac OS X (10.3.9)
Mac OS X (10.3.9)

inapalm:
Let's start with the attempt to re-install.
1. Did you make a backup of all you can't afford to lose?
2. What install option did you use to re-install?
3. After the re-installation, does everything except the internet work properly?
4. What browser are you using?
While I await your response tot he above, try this:
Boot from your Panther install disk holding down the "C" key.
Go to the Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in left panel and First Aid in main panel.
Click on Repair. If Disk Utility reports no errors, quit DU.
If DU reports errors click Repair again and again until DU reports the disk has been repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
Good luck.
cornelius

Similar Messages

Help install big problem

Hi i got a big problem. I`m writing from my phone. I formated my macbook to make a fresh leopard install from the macbook disks. After formating the hd i start the install but then it asks me to insert disk 2. The problem is i can`t eject disk 1. Eject key won`t work. Help Please i`m desperate i`ve got no more computers. Thanks a lot.

kikonenko:
First, try the method described in Dr. Mac: A dozen ways to eject or unmount a recalcitrant CD or DVD.... If none of those dozen ways work try Force Eject.
cornelius

Help please, connectivity problem

Hello, I recently purchased an E2000. In generally it works great when I am online. However, I am having a big problem. There are a couple of webpages, or games, that I would like to remain connected to at all time.
When I idle for 15 or more minutes the router drops the conection, however, when I unplug the router and connect straight to the modem I do not have this problem. I am running through a cable modem, road runner service. Any idea how to keep the connection alive?
I appreciate your help.

Are you getting the problem on the wired computer or on the wireless computer...?

Help Please: Big Bang-XPower: hard drive not found while installing Windows7 x64

I bought an MSI Big Bang-XPower MB and was trying to install windows7 x64. I have a WD raptor 150GB and Samsung 1TB hard drives. Both drives show up in BIOS. SATA controller setting is in IDE.
after I clicked at the "install" icon, a window showed up telling me that no hard drive was found. I have seen this problem before with my old MB. All I needed to do with that MB was to load a driver for the hard drive and problem solved. Does anyone know which driver (name and version, please) is the right one for this MB? I went to the MSI driver page and there are several of them. and some of them give me about 50 drives to choose from (I tried about 10 of them but neither worked).
Also, is IDE or AHCI more appropriate for this MB with Windows7?
Thanks for any help.

i downloaded and unzipped the file to a USB drive. it instructed me to press F6 to load the driver, but i couldn't find this screen while I was installing windows7. at about what step does this normally show up. i can see this if i were installing xp or vista.
anyway, when i click at the load driver with the IDE setting, nothing was found. There was a driver when i changed sata setting to ACHI, but the computer told me that was not a valid driver.
does the drive package have to be loaded in a floppy disc?
anyway, called tech support and was told that the xpower was one of their newest MB. and the tech rep told me that he had never heard of this problem before. he had no idea what he was talking about. Fail! lol

Help please - template problems

2 questions please - actually:
1. Dreamweaver CS4... I think my template functionality has somehow become corrupted. When I try to create new templates (regardless of which site I'm trying it within), they look ok. But when I then try to create a new html page using the template, it garbles the format. I tried it every way I can think of... I tried the 2 column fixed, the 3 column hybrid, etc. etc. And I tried them as is in dreamweaver (without adding any formatting or anything... just create a new, save it, and then create a new page using the tempalte). Still the same garbled end results. (it's keeping the spry menu bar, but loses the columnar format and places them on top of each other)
Interestingly, it's only happening with new templates. (what started this was that I have a 2 column template I'm using, and I want to switch to a 3 column). As long as I keep using the existing format with the existing templates, the new pages are ok.
I tried re-installing dreamweaver, and that didn't fix it. Any ideas?
2. I noticed in another post, that there were comments about largers sites don't do well with templates. My site's content based (www.howtogardenadvice.com) with no fancy bells or whistles... but am well over 50 pages, and still growing. Does that mean I have to stop using a template?
Thanks so much for your help!

2. I noticed in another post, that there were comments about largers sites don't do well with templates. My site's content based (www.howtogardenadvice.com) with no fancy bells or whistles... but am well over 50 pages, and still growing. Does that mean I have to stop using a template?
When you site becomes as large as yours sounds, the initial decision to use Templates becomes tedious, since each saved Template change requires that you upload ALL affected local files to reflect that change. As the site becomes larger and larger, this requirement becomes more and more tedious. It's not that the Templates don't work.
I still use Templates on nearly every site I build, but I also use server-side includes to minimize this need. I use the following scheme....
First, I mentally separate the page layout into three sections:
1. Stuff that will not change for the life of the site (i.e., the basic
structural elements)
2. Stuff that *could* change from time to time (e.g., navigation elements,
burst advertisements, section-specific navigation, etc.)
3. Stuff that *will* change from one page to the next
Then I create a Template containing all class1 elements. Next I create
server-side include files containing all class 2 elements and place them on
the Template as needed. Note - some of the class 2 elements may be
"section-specific elements", and their placement on the Template will be
subject to the next item. Finally, I insert editable regions to cover the
class 3 items, INCLUDING the section-specific navigation.
This allows me to just cookie-cut the rest of the site. I estimate that
even for fairly large sites, about 80% of my work goes into planning and
creating this Template file.
To say anything about your #1 problem, we'd need to start by looking at the code on your Template page, and comparing that to the 'garbled' code on your child pages. Can you show us?

Help Please: Playlist Problem

I recently backed up all the musics and movies I had by using the back up disc feature. I used 4 blank dvd discs to back up all of my files. After I transfered my music to another pc I use, I found very disturbing fact. My ipod has all playsits I had before, but itunes doesn't have any playlist. Every music is under the music fold. Since I have about 1500 musics, I can't even imagine to update all playlists manually. I thought that using the back up disc feature would automatically transfer all my playsits. Is this the way supposed to work or I need to change some other settings too? I don't really know what to do. Please help me to solve this problem. I'd really appreciate it.

Welcome to  discussions!!!
Backup just backs up the music. It doesn't back up any of your settings.
Are you using an external HD?
If so;
Hold down the shift key the next time you launch iTunes. Select create library on the pop up window, and save it on your HD.
The next step can be done in a couple of ways.
1. Go to your music folder>iTunes>iTunes Music>right click>send to>navigate to the newly created library and select choose (or whatever windows says)
2. Open your internal iTunes library (hold down shift key>choose library>navigate to your internal music folder>iTunes>choose) Go to iTunes preferences>advanced>general. Change your iTunes music folder location to the location of the new library on your HD: Ext. HD>iTunes> Now go to advanced and consolidate library. You'll get a message that says "consolidating your iTunes library will copy all of your music to the iTunes Music Folder." Select Consolidate
or....
3. Open your newly created library, file>add to library>navigate to the iTunes Music folder on your internal HD and select choose.
There are a couple of other ways, but this should be good.

Help please? problems with screen resolution & external monitor

had a look around this forum and seen many questions about screen resolution when connecting to an external monitor but unfortunately, non that help me answer my problem.
got a brand new macbook a few months ago and today bought a HP v220 22" external monitor.
I am new to the idea of external monitors and am unsure what i am doing wrong settings-wise. it seems that no matter what resolution i set either my macbook display, or the external monitor display to. the external monitor is still not sharp.
Im not sure how to explain what i need but basically i need it to be so that things appear on the external the same size as they do on my macbook screen, so that i will have more space to work in on my external monitor (i am a graphics student) but at the moment what appears on the monitor is lieterally just a magnified version of my macbook screen, hence it lacks clarity.
the highest resolution offered in the menu for my macbook screen is 1280x800 and my external is recommended to be set at 1680x1050.
what settings should i have to get the resolution right?
i will be so so grateful if you can help. i think ive tried every single display setting but to no avail. so please help me!

The 13.3" screen on the MacBook running at 1280 x 800 will have a ppi (pixels per inch) of around 113. A 22" monitor running 1680 x 1050 will have a ppi of around 90. So it is natural that it will look magnified compared with the MacBook. The two displays have different a pixel pitch.
Since there are no monitors with ~113 ppi out there in the market, what you want to do with having the same size and sharpness between the MB and a monitor will not be possible.
If you ran the MB's screen at 1024 x 640 (not even sure if that is an available choice), then the two screens would match in terms of "magnification." But the MB isn't going to look very sharp running such a low, non-native format.

Could someone Help please BlueJ Problem

Ok I am a University Student, and I am at the moment learn Java, as part of my work I have to make a sun descend like the sunset
I have wrote the method, and got it to work, at the moment though I havent gotten it to loop, and I do not know the command for looping, could someone please tell me the command so I can add it to my program.
The program I am using to write this is called BlueJ
Edited by: Devilslore on Oct 7, 2007 12:55 PM

Devilslore wrote:
I have wrote the method, and got it to work, at the moment though I havent gotten it to loop, and I do not know the command for looping, could someone please tell me the command so I can add it to my program.You should go to the Sun basic java tutorials on loops. Have a look here at the for loop tutorial:
http://java.sun.com/docs/books/tutorial/java/nutsandbolts/for.html
The general tutorial index is here:
http://java.sun.com/docs/books/tutorial/java/index.html
The program I am using to write this is called BlueJThis has nothing to do with your problem. It is a tool to help you write java, nothing more. The program you are really using is the java compiler. In fact, in your next post here, consider having a better subject header. The one you listed suggested that this was an IDE (Integrated Development Environment) problem rather than a simple java problem. By mislabeling this header, I will bet that you cut the number of folks reading your question by more than half.

HELP PLEASE - BASIC PROBLEM

Hi, I am a beginner and am stuck on a problem. Maybe you guys can help me out...
"The intersect method computes the intersection of 2 rectangles--that is, the rectangle that is formed by 2 overlapping rectangles. You can call this method as follows: Rectangle r3 = r1 intersection(r2);
Write a program that constructs 2 rectangle objects, prints them, and then prints their intersection"
Thanks,
RM

I am still having trouble with this...and I cannot figure out why. I entered the following:
public class Sect
{ public static void main(String[] args)
{ Rectangle r1 = new Rectangle(10,10,40,40);
Rectangle r2 = new Rectangle(20,20,40,40);
Rectangle r3 = r1.intersection(r2);
System.out.println(r3);
I came up with the following errors:
Sect.java:5: cannot resolve symbol
symbol : class Rectangle
location: class Sect
{ Rectangle r1 = new Rectangle(10,10,40,40)
^
Sect.java:5: cannot resolve symbol
symbol : class Rectangle
location: class Sect
{ Rectangle r1 = new Rectangle(10,10,40,40)
^
Sect.java:7: cannot resolve symbol
symbol : class Rectangle
location: class Sect
Rectangle r2 = new Rectangle(20,20,40,40);
^
Sect.java:7: cannot resolve symbol
symbol : class Rectangle
location: class Sect
Rectangle r2 = new Rectangle(20,20,40,40);
^
Sect.java:9: cannot resolve symbol
symbol : class Rectangle
location: class Sect
Rectangle r3 = r1.intersection(r2);
^
5 errors
PLEASE HELP!!
thanks,
GM

Help Please ( Speaker Problem Only Playing Through Right)

Can someone help me please, recently my speakers have only been playing through the right speaker, i have tryed headphones and the problem still occurs and no sound is coming out of the left speaker, i have checked all the sound settings and they are all correct.

Greetings,
When you turn your Mac on with either the headphones or the speakers plugged in, do you hear the startup chime "BONG!" only through one side?
Reset the SMC and then test: http://support.apple.com/kb/HT3964
Reset the PRAM and then test: http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
If the issue persists at this point and those headphones work fine on another device (like an iPod) then you have a hardware issue and need service:
-- Contact a local Apple Authorized Service Provider: http://support.apple.com/kb/HT1434
or
-- Book an appointment at an Apple Retail Store: http://www.apple.com/retail/
or
-- Contact Apple: http://www.apple.com/support/contact/
Hope that helps.

Help! Big problem with my Macbook Pro.

Help!
Everytime I press the 'on' button, the keychain box appears, asking me for my keychain password. The only problem is, I do not know it and whenever I try to guess, it will not let me login to access my computer. Any suggestions?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

URGENT help please. Problem creating Chinese language text field in Adobe LiveCycle.

A client requested to create an employee details form in which few text fields has to be in Chinese language. I selected "Arial Unicode MS" for that fields. In final PDF I am able to insert text in Chinese text fields in Acrobat. But I cant insert text when i opened the final PDF in Adobe Reader. (only these Arial Unicode MS fields are disabled). All other fields (English) are in Arial font., they are working in both (Acrobat and Reader). As these forms will be distributed to people who may don't have Acrobat and only the Free Adobe Reader. Can someone please advice me how to solve this problem.
Thank you
- Amal

Make sure the format of the date strings provided by the calendar is what you are expecting. Or use the "formattedValue" for the input strings.

Help please-browser problems

Hi folks: I'm getting an error "http 504 gateway timeout" on some pages. For instance, I do a web search and end up on wikipedia. If the wikipedia page has more pages, I click next, and get the error message. This happens on other sites with multiple pages. Please help me! Steph
Solved!
Go to Solution.

Steph, do this: With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
Now try those browser sites again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Help me big problem

hello all
I have problem with my iphone 3gs
I conect with charging it`s ok
but in USP laptop dosn`t conect????
just for charge in fuse !!!
I try to conect with my laptop no way
and no charging !!!!!!
!!!! I need help

I would help you but i dont have a pc. Mac Is the way to go. If you have a problem they Help you.

Newbie needs help Please - mail problems

Help Needed Please.
First of all it started a couple of weeks ago i would enter my mail and receive a message saying that the IMAP server didnt reconise
my password even though i was entering it correctly. My email address i have kept when i chan ged from BT over to Virgin.
But we have had the imac 6 months now and its beeen performing brilliant.
Anyway like a idiot i tried to change settingxs and try different options, and now i have wiped my keychain (even tho got no idea what a keychain is)
and my email settings are messed up.
Didnt know if i should do a system restore??
Any Genius at there thanks in advance and im sure your all kringing with my lack of mac knowledge
this is the first Mac ive ever brought always been a windows
Mac's the way love it

Somewhere (hopefully) you will have a note of your email user name and password provided by your ISP. It should note the server addresses for ingoing and outgoing servers. If you haven't got these details they are likely available on the FAQs of your ISPs website.
Assuming you are using Apple's Mail app for email the route to adding/editing the relevant data is:
Mail>Preferences>Accounts tab. You then need to add/edit the data under the various tabs. Check that the SMTP server has all the correct details by clicking in the drop-down menu and selecting 'Edit SMTP server list'. Make sure the details are correctly entered.

HELP;;PLEASE,,,,BIG PROBLEM

Similar Messages

Maybe you are looking for