Help Please!: How to use multiple Transmit keys in WEP??
I am a new Mac user with a MacBook Pro..
I am able to use the wireless connection when at home, however I am having issues when at work...I think this is due to the fact that my work puts out 2 wep keys and then tells us which of the two keys are the transmit key....I believe the other key must be used for encryption/decryption purposes...It may work once the transmit key is #1, but its not always #1 (currently it is not)...
Using the wireless setup interface in the os, I only have the ability to add one WEP key..this means it is only transmitting key #1.....
Is there some sort of advanced setting which would allow me to add multiple keys and then select the key which should be used as the transmit key? This is common on Windows systems...I would assume Mac could do it also...
Without the ability to add more than one key and select the transmit one, I will be unable to get into my corporate wrieless setup...
Thanks for your help!!
MacBook Pro Mac OS X (10.4.5)
Basically..is there a way to set a WEP key and have it negotiate as transmit key #2 ??????
Similar Messages
-
SSL: how to use Multiple Private key/Certificate pair for authentication.
Hi all,
i am implementing SSL in java using X509 Certificate/private key combination.
i have two set of private key/certificate pair.
one is factory default and another is generated at run time.
my problem is to try ssl connection with both pairs on same tcp/ip connection.
e.g. on server side: first try ssl connection with factory default certificate, if it fails try connecting with generated certificate on same tcp/ip connection.
on client side: if generated certificate(this certificate was generated at server side) is present first perform server authentication using this certificate otherwise authenticate server with factory default certificate.
can someone please help and let me know how do i need to configure both ends(client and server) for achieving the same.
Thanks In Advance
Saurabh AhujaClient code does not contain any default truststore and needs a certificate for authentication.Of course it does. OpenSSL has a way of doing that: some kind of equivalent for the truststore. None of the stuff you've posted here about generating certificates at runtime has any bearing on that problem.
It's like this. The idea of PKI with SSL is as follows:
- the server has a private key and a signed certificate. Preferably it's signed by a CA that the client already trusts, otherwise if it's self-signed it has to be exported from the server's keystore and imported into the truststores of all the clients.
- the client has a truststore that trusts the server, one way or the other, see above.
- the server's private key is private to it. Nobody else has it. Nobody else can ever get it. If it ever leaks, the server is compromised, and server authentication via that private key now means absolutely nothing. You have lost security.
- the server sends its cert to the client along with a digital signature signed by its private key.
- the client (a) decides whether it trusts the cert, via its truststore, and (b) verifies the digital signature, which establishes that the server owns the certificate.
At this point the server is authenticated to the client and the SSL connection is open. It can now be used as an ordinary socket connection.
If you want client authentication too, you need all the above in reverse as well, i.e. reading server for client and client for server throughout. Note particularly that each client must have its own private key. Otherwise the private key isn't private, so signing something with it doesn't establish ownership, so client authentication isn't valid.
You need to understand all this stuff and relate it to the apparently broken security design of your application. Generating a private key and a certificate at runtime is complete nonsense within the context of PKI and SSL. It proves nothing, establishes nothing, authenticates nothing; it just wastes time. -
How To Use Multiple Currencies in single payroll ........
Dear All
Can you help me How To Use Multiple Currencies in single payroll?
with regards
User600722I am not a functional expert. but ML Note 150173.1 (which is quite old) states that this is not possible.
Srini -
Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help
Out of the box, to use the function keys as function keys, hold down the fn key when you press the key. Otherwise, you get the picture function on the key. You can reverse this behavior in the Keyboard system prefs.
-
How to use multiple statements inside the "THEN" block of CASE statement?
Below is the code:
SET @strTempString = case @strKeyMode
WHEN 'AUTO/CYCLE'
THEN @strRefID + '|' + @strRetID
WHEN 'CYCLE'
THEN @strRefID + '|' + @strRetID
WHEN 'COMMERCIAL'
THEN @strRefID + '|' + @strRetID
WHEN 'ISNAP'
THEN set @strFName = ltrim(rtrim((Left(dbo.CleanTheStringAdv(@strFName + ' ', 2) + ' ', 2))))
'' + @strRefID + '|' + @strLName + '|' + @strFName + '|' + @strZIPorPolType
WHEN 'ASNAP'
THEN @strRefID + '|' + @strRetID
WHEN 'MOAT'
THEN @strRefID + '|' + @strRetID
else '0'
end
The first 3 conditions are understandable. How to use multiple statements in 4th case?
Here I first want to set the value as:
set @strFName = ltrim(rtrim((Left(dbo.CleanTheStringAdv(@strFName + ' ', 2) + ' ', 2))))
and then return the string '' + @strRefID + '|' + @strLName + '|' + @strFName + '|' + @strZIPorPolType to @strTempString.
Please help me remove the syntax errors.
Thanks in advance.Try below SQL
DECLARE @strKeyMode varchar(20) = 'ISNAP'
DECLARE @SQL VARCHAR(MAX)
DECLARE @strRefID int=1
DECLARE @strRetID INT=2
--FIRST WAY
IF @strKeyMode ='AUTO/CYCLE'
SELECT CAST(@strRefID as varchar(10))
ELSE IF @strKeyMode ='CYCLE'
SELECT @sql = CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))
ELSE IF @strKeyMode='ISNAP'
SELECT @sql = CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))+'test'+'abc'
ELSE
SELECT @SQL='ABC'
print @sql
----SECOND WAY
SELECT @SQL = CASE @strKeyMode
WHEN 'AUTO/CYCLE' THEN CAST(@strRefID as varchar(10))
WHEN 'CYCLE' THEN CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))
WHEN 'ISNAP' THEN CAST(@strRefID as varchar(10)) + '|' + CAST(@strRetID as varchar(10))+'test'+'abc'
ELSE 'No Record'
END
PRINT (@SQL)
--Prashanth -
How to use multiple classes for each form
Hi,
I have created two forms using screen painter and now i want to use different classes for these two forms .
I have declared the Sbo Connection in main class i.e. Set Application ,Connection Context() but while connecting to other classes
for executing the code for that form SAP is not connected to that class.How to use multiple classes functionality i don't able to
do that.Please provide some sample codes for that as it will be more helpful for me to understand.
Thanks & Regards,
AmitHi Amit,
In fact, its more advisable to use separate classes for every form that you use. Have one common class, say, for eg., clsMain.cs which has all the connection and connectivity to other classes, wherein, the menu event and item event of this main class, will just be calling the menu / item event of other classes.
The individual functionality of the child classes will be called from the item / menu event of the respective classes.
Item event in clsMain.cs will be as below.
private void oApplication_ItemEvent(string FormUID, ref SAPbouiCOM.ItemEvent pVal, out bool BubbleEvent)
SAPbouiCOM.Form oForm;
BubbleEvent = true;
try
if ((pVal.FormTypeEx == "My_Form1Type") && (pVal.EventType != SAPbouiCOM.BoEventTypes.et_FORM_UNLOAD))
oForm = oApplication.Forms.GetForm("My_FormType", pVal.FormTypeCount);
NameSpace.Repots.ClsForm1.ClsForm1_ItemEvent(oApplication, oCompany, oForm, ref pVal, ref BubbleEvent);
if ((pVal.FormTypeEx == "My_Form2Type") && (pVal.EventType != SAPbouiCOM.BoEventTypes.et_FORM_UNLOAD))
oForm = oApplication.Forms.GetForm("My_FormType", pVal.FormTypeCount);
NameSpace.Repots.ClsForm1.ClsForm2_ItemEvent(oApplication, oCompany, oForm, ref pVal, ref BubbleEvent);
Now, in the individual classes, you can have their respective item events, which will be called from the main class, and the respective functionalities will occur.
Hope this helps.
Regards,
Satish. -
Use multiple primary keys to create DB constraint
Hi,
Is it possible to have multiple primary keys within one EJB to create a DB including the constraints, if so how? Is there an example of this or any example which uses multiple primary keys to create a DB?
Thanks,
Maarten"Is it possible to have multiple primary keys within one EJB..."
If you mean a composite key, yes. Your PrimaryKeyObject would have one attribute for each column that makes up your composite key. If that's not what you meant, please clarify.
"...to create a DB including the constraints"
Not sure what you mean here. Constraints are enforced by the DB, and you don't create databases with EntityBeans. -
How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
Hi All,
Hope to you a very happy new year,
I have two differnt LAP 1300 and 1200 in my network and I need to add theme to the WLC,
I successed to add one of theme by the option 60 in the DHCP pool at the Core SW,
So my quetion is below:
How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
Thanks in Advanced,
Ahmed,To add to Scott's post. Option 60 would be useful if you needed to put certain types of AP on specific controllers. Otherwise, no real need to use it for the most part.
Though, I do recall an issue a few years ago that some windows machines had issues getting DHCP if option 43 is being returned.
Now, on an IOS switch, you can only configure one option 60 per DHCP scope
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered -
How to use standard function keys as custom keys
how to use standard function keys as custom keys.
i have encountered that problem while developing a screen, there i'm supposed to use standard function key F2 ( which actually meant for choose) for clearing the screen fields where the cursor is present and f1 for saving data that entered in screen fields, etc...
kindly help me out.Hi ,
Solution to use SAP reserve function keys F1 .. F4 (mostly this requirement comes up for RF screens) can be acheived by assigning your new Function code using the Menu path Utilities --> F key Consistency in the Menu Painter (SE41) . Once you assign your cutom function code to the standard Fn keys the only remaining step is to make sure that you set a curson on any of the field on sceen by using the Key Word "SET CURSOR" .
If you dont use the key word SET CURSOR in the PBO of the screen then you might not see any response for F4.
Thanks -
How to use multiple tape drive for single filesystem on single client.
Hello All.
I want to backup single filesystem with multiple tape drive.
Incase of Symantec veritas netbackup "NEW_STREAM" for multi-stream backup.
Backup client has a single backup filesystem like /data1 directory with 4 LTO6 drives.
/data1 directory doesn't have a sub-direcotry, just present a files.
If /data1 directory has a sub-directory like /data1/aaa, /data1/bbb, /data1/ccc , Is it possible to use multiple drives?
Please anybody answer the questions.
Thanks advanced.See how to use multiple tape drive from single client when I want to backup single filesystem?
-
How to use multiple ipods on one account
I have an Ipod classic and just bought my sons two nano's how do I use these on the same account without changing my account info?
Take a look here:
How to use multiple iPods with one computer
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards. -
How to use multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8?
Hi!
Question about the problem mentioned in subject.
I have configured that JNLP opens with 1.5 version, both versions are enabled in Java Control Panel Runtime Settings but when I try to start a desktop java console says:
Java Web Start 1.5.0_22
Using JRE version 1.6.0_07 Java HotSpot(TM) Client VM
And the opening of the desktop creates an exception:
Java Web Start - Invalid Argument Error
TooManyArgumentsException[ Too many arguments supplied: {C:\WINDOWS\Temporary, Internet, Files\Content.IE5\....
I'm trying to open my desktop with 1.5 version and other programs with 1.6 version. What is it that I still need to do? I'm kind of confused with this. Some of my collagues have succeeded with this and some doesn't, with the same configuration.
So the question is, how to use multiple JREs with IE8 so that one application uses 1.5 version and others 1.6 version?
Br,
Katri
Edited by: ka**** on 09-Mar-2011 01:16
Edited by: ka**** on 09-Mar-2011 03:16ka**** wrote:
..Question about the problem mentioned in subject.No "Using multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8" is a statement. To transform it to a question would be something like "How to use multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8?".
Once you can come up with an actual question, I might look at this more closely. -
How to use multiple table in single control file?
Hi,
How to use multiple table and data file in sigle control file? I have a four table and four csv file i mean data file for that. I am running concurrent program to load the data from csv file to custom table. based on my input data file name, it has to take automatically from one control file.
Can anyone share with me how can i acheive this?
ThanksHi,
Can't we acehive like below. I don't this exactly corrcect.
OPTIONS (SKIP=1)
LOAD DATA
INFILE << file name 1 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE1
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
PARENT_ITEM "TRIM(BOTH FROM :PARENT_ITEM)"
LOAD DATA
INFILE << file name 2 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE2
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
ITEM_NUMBER "TRIM(BOTH FROM :ITEM_NUMBER)"
)Edited by: orasuriya on Sep 14, 2009 3:03 AM -
How to use multiple selection parameters in the data model
Hi, after have looked all the previous threads about how to use multiple selection parameters , I still have a problem;
I'm using Oracle BI Publisher 10.1.3.3.2 and I'm tried to define more than one multiple selection parameters inside the data template;
Inside a simple SQL queries they work perfectly....but inside the data template I have errors.
My data template is the following (it's very simple...I am just testing how the parameters work):
<dataTemplate name="Test" defaultPackage="bip_departments_2_parameters">
<parameters>
<parameter name="p_dep_2_param" include_in_output="false" datatype="character"/>
<parameter name="p_loc_1_param" include_in_output="false" datatype="character"/>
</parameters>
<dataTrigger name="beforeReport" source="bip_departments_2_parameters.beforeReportTrigger"/>
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
select deptno, dname,loc
from dept
&p_where_clause
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_DEPT" source="Q2">
<element name="deptno" value="deptno"/>
<element name="dname" value="dname"/>
<element name="loc" value="loc"/>
</group>
</dataStructure>
</dataTemplate>
The 2 parameters are based on these LOV:
1) select distinct dname from dept (p_dep_2_param)
2) select distinct loc from dept (p_loc_1_param)
and both of them have checked the "Multiple selection" and "Can select all" boxes
The package I created, in order to use the lexical refence is:
CREATE OR REPLACE package SCOTT.bip_departments_2_parameters
as
p_dep_2_param varchar2(14);
p_loc_1_param varchar2(20);
p_where_clause varchar2(100);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
CREATE OR REPLACE package body SCOTT.bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
if (p_dep_2_param is not null) --and (p_loc_1_param is not null)
then
p_where_clause := 'where (dname in (' || replace (p_dep_1_param, '''') || ') and loc in (' || replace (p_loc_1_param, '''') || '))';
else
p_where_clause := 'where 1=1';
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
As you see, I tried to have only one p_where_clause (with more than one parameter inside)....but it doesn't work...
Using only the first parameter (based on deptno (which is number), the p_where_clause is: p_where_clause := 'where (deptno in (' || replace (p_dep_2_param, '''') || '))';
it works perfectly....
Now I don't know if the problem is the datatype, but I noticed that with a single parameter (deptno is number), the lexical refence (inside the data template) works.....with a varchar parameter it doesn't work....
So my questions are these:
1) how can I define the p_where_clause (inside the package) with a single varchar parameter (for example, the department location name)
2) how can I define the p_where_clause using more than one parameter (for example, the department location name and the department name) not number.
Thanks in advance for any suggestion
AlexAlex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer -
I have multiple iPods & iPhones & I'd like to share my library with them all. How do I do this??? How can I share content outside of purchased iTunes?
See this for some tips: How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495
Maybe you are looking for
-
I am trying to burn my photo booth pictures from the folder, (PICTURES>PHOTOBOOTH) I am in the finder, and i hit "Command A " to highlight all of the pictures. Then i click one of the highlighted pic's (to drag to a blank CD in findder) and all the p
-
Oracle equivalent to SQL SERVER CLRClipString function
Hello Friends, I am running the following sql query in SQL SERVER successfully .. select * from CLRSplitString('33,54,105,148,149,163,165,179,193,195,201,202,234,239,279,282,297,299,329,332,350,415,417,439,440,500,552,570,589,603,628,655', '', ',') x
-
it may be caused by bloatware but i still need to rid my browser of some useless extension i somehow have gotten. http://search.imesh.com/ comes up every time.
-
Can anyone help me with how to install itunes on windows 8. The apple techs suggestions did not work
Can anyone help me with how to install itunes on windows 8. The apple techs suggestions didn't work. Spent most of today installing and uninstalling itunes according to their instructions. They will charge me again if I call again.
-
How can someone send an email and there be absolutely no way to trace it?
For a year now I have been receiving emails from this anonymous emailer, who has totally disrupted my life and invaded my privacy. I am not starting to have strange things happen with my iPhone. I am so desparate to find out who wants to destroy my l