Help please with exporting for print

Hi All,
Hopefully someone here can help. I have the opportunity to get some 24x30 inch lustre prints printed out for free but the printer has some specific file requirements which I am not 100% sure how to meet.
Here they are:
1. Colour space : Adobe RGB(1998)
2. File size must be 24x30"
3. Resolution : 300ppi
4. File : Level 12 (or lower) Photoshop JPEG
Questions:
1. I have calibrated my monitor with a ColorVision Spyder so I use that profile on my MBP monitor. I then usually export from Aperture using colorsync profile sRGB IEC61966-2.1. To meet the requirement above do I just need to change the colorsync profile on export to Adobe RGB(1998) or should I be doing something while editing?
2. I use a Nikon D70 so my files are 3024 x 1998, how do this translate to inches? Do I need to up size the files and if so how do I do this in Aperture?
3. I take it all I have to do here is change the DPI setting on export to 300 (is DPI the same as PPI?)
4. I think this just means the image quality will be set to 12 on export.
Sorry for all the questions but getting prints done at a lab is something new to me and I would like to try and get the best results.
Thanks in advance,
Andrew

Hi Ian,
Thanks heaps for your quick reply. In regards to your answer for the 2nd question:
"2. You definitely need to upsize the files, 24x30" at 300ppi is 7200x9000px. You can use the 'fit within' option and give a size in inches and it will upsize as needed on export. Note that 24x30 is a drastically different aspect ratio than your 3:2 dSLR shots, so you may also want to crop the images to the 5:4 aspect."
Can you please advise what size, in pixels, I would need to crop to plus will this make the image less sharp, therefore I should sharpen more? Sorry I have never up sized and printed an image before so not sure if there is a correct way of doing it (I think I read somewhere you should up size in increments of 10% or something?)
Cheers.

Similar Messages

  • Need Help Please - PSD InDesign (for print)?

    Hello Everyone,
    I'm a graphic designer for a company that has decided to run some print ads in a magazine. At the time, I only had Photoshop to create their advertisement with. Now they have purchased CS4, which will make my life easier in the future, however, for now I have the problem of creating my advertisement made with Photoshop and creating a print ready PDF.
    Here is my problem:
    - I created a PSD at 8.5" x 11" at 300ppi
    - I did not take in to account for the 0.125" bleeds and 1/8" trim
    - It needs to be SWOP compliant (I figured out I can export a PDF that adheres to SWOP)
    - Fonts should be Type 1 Postscript, no TTF (I'm using Helvetica and Arial, when I export the PDF, it says the embedded fonts are TTF)
    - I'm totally lost with regards for designing work for print!
    Here the specs they gave me, AFTER I created the design in Photoshop
    ====
    Full page, full bleed 8.0" 10-3/4" (**I created my PSD as a 8.5" x 11" - without regard to bleeds**)
    Include 1/8 bleed over all to ensure full page bleed
    and keep live copy 1/4 from trim and crop marks.
    CMYK, 4-color process printing only.
    Do not add bleed to partial page ads.
    All requirements are based on Specifications for Web Offset
    Publications (SWOP). Any deviation from these specifications may
    result in less-desirable printed results.
    We support PDF files generated by Adobe Acrobat using
    the X-1A Job Option Settings for Distiller. In order for
    prepress to generate printable PDF s, it is important that
    the native file is prepared accordingly.
    Preparing native files for printable PDF s:
    All images/scans must be in CMYK mode,
    300 dpi resolution
    Use Postscript (Type 1) fonts only. No True
    Type, Windows/PC or custom fonts accepted
    Embed all fonts
    Do not nest EPS files in other EPS files
    Four-color solids should not exceed SWOP
    density of 280%
    Provide two digital color proofs at 100% size, created
    from the supplied digital file, on a contract-quality,
    digital halftone proofing system in accordance with
    SWOP web coated standards (AGFAPressmatch,
    Kodak Approval, DuPont Waterproof, etc.). Laser or
    inkjet proofs are not considered accurate in color and
    are supplied for content confirmation only.
    If supplied, the publisher is not responsible for color variances
    between the digital file and final color reproduction.
    NOTE: If proofs are not supplied, make-goods due to
    reproduction quality will not be honored.
    ====
    I've never done print work before, as I'm mainly a graphic designer for the web.
    Any help on this matter would be greatly appreciated! Unfortunately for me, they bought the advertisement space with the magazine for the running of the next issue before speaking with me. So I'm under extreme pressure to get this underway. I'll be most grateful for any help or guidance, Thanks guys!
    - D

    You can Place a PSD in Indesign, but unless the bleed is a single color,
    it's going to be easier to add bleed in Photoshop. Bleed is whatever
    gets cut off when they trim the paper. Trim is close, but not exact, so
    whatever picture or color goes to the edge of the paper must extend
    beyond the edge to avoid trim including some white when the trim is not
    quite perfect. If it's a picture that goes to the edge, you need to
    figure out a way to extend the picture beyond the edge. If it's white
    that goes to the edge, then you don't need bleed. If it's a non-tone
    color field (a single color) then you could Place the PSD in Indesign
    and add bleed color behind it and extending beyond the edge of the page.
    The magazine should not concern themselves with TT or T1 fonts, either
    one should work. That said, Helvetica and Arial are very close. If your
    Helvetica is Type 1, just use Helvetica for the whole thing. If you
    embed it in the PDF, it should show there as a Type 1 subset.
    Kenneth Benson
    Pegasus Type, Inc.
    www.pegtype.com

  • Help Please with Driver

    I need to install the ADB Interface for the X2 onto my computer. Does any one know how or where I can get this driver?

    <Duplicate post.  Please see Help Please with Driver  for any replies.  This post will be closed.>

  • Help please with 2006 Macbook 13inch, for tv hook up.

    Help please with 2006 Macbook 13inch, to hook up to tv for streaming. The display works through VGA but the audio isn't working. Got a plug that goes into headphone jack on computer and connects into the audio jack on the back of tv but no sound. I'm not quite sure what the issue is, whether its the wrong plug, the tv, or the computer. Best Buy says this is the right plug and it seems that it would be, but who knows. If anyone has any experience in this, I would appreciate the help!

    Make sure those audio plugs are matched with the VGA plug. With your MacBook running something with audio switch between your sources on the TV Component, Composite and such. See if the sound is coming from another source. If so then you've got your audio plugs in the wrong jacks.
    Also could you post the make and model number of your TV.

  • Compatible with quickbooks for printing checks? Driver support

    How do I change the font on my 6600 officejet to be compatible with quickbooks for printing checks? When I try to print a check a box pops up and says "Driver lacks full font support". When I went ahead and tried to print the check any way, the wording was way off of the lines.

    Hello @Eddy61,
    Welcome to the HP Support Forums!
    I understand that you're receiving the error 'driver lacks full font support' when attempting through Quickbooks to your HP Officejet Pro 6600 All-in-One Printer. I would like to assist you with resolving this error today. Now I did some research and found that this is a Quickbooks error with the compatibility with your product.
    I found under the QuickBooks website some steps that  may quickly resolve this error for you. You can find the steps here.
    From the File menu, select Printer Setup.
    In the Form Name drop-down list and choose Check/Paycheck.
    Click the Settings tab.
    Click the drop-down list next to Printer type.
    Select Page-oriented (Single sheets).
    Click OK to save changes.
    Once the setting changes have been made, please try printing again. Should the issue persist, you can try loading a generic print driver onto your machine. To load the generic driver please follow the steps below.
    How To Add An Alternate Driver:
    Open your Start screen by either selecting the Windows button in the bottom left hand corner of your computer screen or by selecting the Windows key on the bottom left of your keyboard to the left of the Ctrl button
    In the Start Screen type 'Devices and Printers' . If the Devices and Printers option doesn't automatically populate, than click on Settings on the top right and then click on Devices and Printers.
    In the Devices and Printers folder right click on your HP Officejet Pro 6600 and left click on Printer Properties
    Left click on the Advanced tab
    Left click on New Driver
    When the New Driver window opens just hit 'next' until you see a list of Manufacturers on the left and a list of Printers on the right.
    Select HP as the Manufacturer on the left
    Select Deskjet 9800 as the printer on the right. If Deskjet 9800 doesn't appear than select 'Windows Update' on the bottom left and once the update completes you will be able to select Deskjet 9800.
    After selecting Deskjet 9800 hit next to complete the New Driver Wizard
    Under the Printer Properties window select 'Apply' but don't hit OK
    Select the General tab
    Rename your printer back to HP Officejet Pro 6600
    Hit OK
    Lastly, right click on your HP Officejet Pro 6600 one more time and left click on Printing Preferences
    Left click on the Paper/Quality tab
    Left click on the 'Normal' dropdown for Print Quality on the bottom right and change this to Fast Normal
    Hit Apply and OK
    Now that the new driver has been successfully added in, please try printing through Quickbooks again to verify if the error message has been resolved .
    Please respond to this post with the result of your troubleshooting. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Problem with Exporter for MS Access 3.2 in SQL Developer

    Hi,
    I have problem with exporting tables and data from MS Access to XML with Exporter for MS Access 2000.
    This error ocurr: 'Error #5 - XML Exporter'
    When I use Exporter for MS Access 2002 this error ocurr: 'Error #3478 - XML Exporter'
    Any leads how to solve this problem ?

    Thread moved to Forum Home » Database » SQL Developer
    SQL Developer
    Please, stay tune there.
    Nicolas.

  • Little help please with forwarding traffic to proxy server!

    hi all, little help please with this error message
    i got this when i ran my code and requested only the home page of the google at my client side !!
    GET / HTTP/1.1
    Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-shockwave-flash, */*
    Accept-Language: en-us
    UA-CPU: x86
    Accept-Encoding: gzip, deflate
    User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; InfoPath.2; .NET CLR 2.0.50727)
    Host: www.google.com
    Connection: Keep-Alive
    Cookie: PREF=ID=a21457942a93fc67:TB=2:TM=1212883502:LM=1213187620:GM=1:S=H1BYeDQt9622ONKF
    HTTP/1.0 200 OK
    Cache-Control: private, max-age=0
    Date: Fri, 20 Jun 2008 22:43:15 GMT
    Expires: -1
    Content-Type: text/html; charset=UTF-8
    Content-Encoding: gzip
    Server: gws
    Content-Length: 2649
    X-Cache: MISS from linux-e6p8
    X-Cache-Lookup: MISS from linux-e6p8:3128
    Via: 1.0
    Connection: keep-alive
    GET /8SE/11?MI=32d919696b43409cb90ec369fe7aab75&LV=3.1.0.146&AG=T14050&IS=0000&TE=1&TV=tmen-us%7Cts20080620224324%7Crf0%7Csq38%7Cwi133526%7Ceuhttp%3A%2F%2Fwww.google.com%2F HTTP/1.1
    User-Agent: MSN_SL/3.1 Microsoft-Windows/5.1
    Host: g.ceipmsn.com
    HTTP/1.0 403 Forbidden
    Server: squid/2.6.STABLE5
    Date: Sat, 21 Jun 2008 01:46:26 GMT
    Content-Type: text/html
    Content-Length: 1066
    Expires: Sat, 21 Jun 2008 01:46:26 GMT
    X-Squid-Error: ERR_ACCESS_DENIED 0
    X-Cache: MISS from linux-e6p8
    X-Cache-Lookup: NONE from linux-e6p8:3128
    Via: 1.0
    Connection: close
    java.net.SocketException: Broken pipe // this is the error message
    at java.net.SocketOutputStream.socketWrite0(Native Method)
    at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
    at java.net.SocketOutputStream.write(SocketOutputStream.java:115)
    at java.io.DataOutputStream.writeBytes(DataOutputStream.java:259)
    at SimpleHttpHandler.run(Test77.java:61)
    at java.lang.Thread.run(Thread.java:595)
    at Test77.main(Test77.java:13)

    please could just tell me what is wrong with my code ! this is the last idea in my G.p and am havin difficulties with that cuz this is the first time dealin with java :( the purpose of my code to forward the http traffic from client to Squid server ( proxy server ) then forward the response from squid server to the clients !
    thanx a lot,
    this is my code :
    import java.io.*;
    import java.net.*;
    public class Test7 {
    public static void main(String[] args) {
    try {
    ServerSocket serverSocket = new ServerSocket(1416);
    while(true){
    System.out.println("Waiting for request");
    Socket socket = serverSocket.accept();
    new Thread(new SimpleHttpHandler(socket)).run();
    socket.close();
    catch (Exception e) {
    e.printStackTrace();
    class SimpleHttpHandler implements Runnable{
    private final static String CLRF = "\r\n";
    private Socket client;
    private DataOutputStream writer;
    private DataOutputStream writer2;
    private BufferedReader reader;
    private BufferedReader reader2;
    public SimpleHttpHandler(Socket client){
    this.client = client;
    public void run(){
    try{
    this.reader = new BufferedReader(
    new InputStreamReader(
    this.client.getInputStream()
    InetAddress ipp=InetAddress.getByName("192.168.6.29"); \\ my squid server
    System.out.println(ipp);
    StringBuffer buffer = new StringBuffer();
    Socket ss=new Socket(ipp,3128);
    this.writer= new DataOutputStream(ss.getOutputStream());
    writer.writeBytes(this.read());
    this.reader2 = new BufferedReader(
    new InputStreamReader(
    ss.getInputStream()
    this.writer2= new DataOutputStream(this.client.getOutputStream());
    writer2.writeBytes(this.read2());
    this.writer2.close();
    this.writer.close();
    this.reader.close();
    this.reader2.close();
    this.client.close();
    catch(Exception e){
    e.printStackTrace();
    private String read() throws IOException{
    String in = "";
    StringBuffer buffer = new StringBuffer();
    while(!(in = this.reader.readLine()).trim().equals("")){
    buffer.append(in + "\n");
    buffer.append(in + "\n");
    System.out.println(buffer.toString());
    return buffer.toString();
    private String read2() throws IOException{
    String in = "";
    StringBuffer buffer = new StringBuffer();
    while(!(in = this.reader2.readLine()).trim().equals("")){
    buffer.append(in + "\n");
    System.out.println(buffer.toString());
    return buffer.toString();
    Edited by: Tareq85 on Jun 20, 2008 5:22 PM

  • Exporting for Print

    Hello all...When prepping an image export for print, the following values are asked for by my print company. Not sure about these two:
    1. What resolution do I export at?  How do I know the maximum I have available on that image with enlarging?
    2. LR does not allow me to select a bit depth when I export.  They require 8bit how can we verify this?
    TIA,
    Amelia

    1. If by resolution you mean pixels per inch, there is no maximum. Normally printers require 240 or 300 ppi. If you want a picture a certain size (say 4x6), you need to crop the image to that size and then export, and in the Export dialog you can set the pixels per inch to give you 4x6.
    2. If you export as a .jpg, then it has to be 8-bit. All .jpg photos are 8-bit.

  • Help please with FaceTime. The built in app seems to have disappeared from my iPad2. Bought it in Australia

    Help please with FaceTime. My built in app seems to have disappeared.

    If K Penguin's suggestion doesnt work, you will have to go to you iTunes and do a reset, that is if you do not have it in your back up library.

  • Can anyone help me with advice for a replacement hard drive

    Hi there,
    Can anyone help me with advice for a replacement hard drive and RAM upgrade for my Mac Book Pro 5,3
    Its 3 years old & running Snow Leopard 10.6.8
    I do a lot of audio & movie work so performance is important.
    The logic board was replaced last summer & I was advised to replace the hard drive then...oops
    Anyway it has limped on until now but is giving me cause for concern...
    I have found a couple of possibilities below...so if anyone does have a moment to take a look & help me out I would be most grateful
    http://www.amazon.co.uk/Western-Digital-Scorpio-7200rpm-Internal/dp/B004I9J5OG/r ef=sr_1_1?ie=UTF8&qid=1356787585&sr=8-1
    http://www.amazon.co.uk/Kingston-Technology-Apple-8GB-Kit/dp/B001PS9UKW/ref=pd_s im_computers_5
    Kind regards
    Nick

    Thanks guys that is so helpful :-)
    I will follow your advice Ogelthorpe & see how I get on with the job!!! Virgin territory for me so I may well shout for help once my MBP is in bits!! Is there a guide for duffers for this job anywhere??
    & yes in an ideal world I would be replacing my old MBP but I'm just not in a position to do that at the moment....let's hope things pick up in 2013
    All the very best
    Nick

  • Export for print

    What should the DPI be set for when you export for print? (The best quality) What should the settings for gamma, and the color profile be also? Not sure what gamma and color profile is.

    The DPI setting during export doesn't affect the quality of the print. It is only used by some software to determine what size the image is printed at. For example, a 1500 x 1500 pixel size image exported at 300 DPI would print as a 5" x 5" size if your printing software was told to print actual size. If you exported that same image at 150 DPI, it would want to print at 10" x 10". Your printing software can easily override these settings anyway so the DPI setting doesn't do much.
    Most printers and printing services use the sRGB profile so that is the setting to use unless you specifically know your printer will use something else.
    The gamma setting can be used to change the brightness of the image. I would leave it as the default unless your prints are coming out too dark or light.

  • Could someone help me with instructions for doing a clean install for iMac with mountain lion 10.8.4 ?

       Could someone help me with instructions for doing a clean install for Could someone help me with instructions for doing a clean install for an early 2009 iMac 20"  with Mountain Lion 10.8.4 ?
       Thank You,
                                leetruitt

       Barney,  William,  nbar, Galt\'s Gulch:
       A nephew stayed with us to take a course at the local community college last semester. I allowed him use of my mac for research just after I installed Mountain Lion. He decided to "help out" and ran a 3rd party clean and tune up app., Magician.  The tune up wiped over 1200 titles of my music in iTunes,  also a path of folders with names containing nothing but more empty folders with names. Almost every program I open and run for a short time crashes, also folders and programs are in wrong places, or cannot be located (the nephew, for instance). Up to this time I have always been able to track a problem far enough to resolve it by careful persistence and good luck, but I do not have the tech savvy to solve this one without getting in deeper. I have run disk utility saveral times and always get  variations of this:
    ACL found but not expected on
    "private/etc/resolve.conf"
    "private/etc/raddb/sites-enabled/inner-tunnel"
    "private/etc/rabbd/sites-enabled/control-socket"
         Also, after four years of intense daily use it is cluttered with much junk,  and every app that I was curious about, and I am a very curious guy.
       So I know my limits, (and now my nephew). I dumped my pc for a Strawberry iMac a few years ago, and so far every problem I've encountered, or brought on myself, the Mac has resolved with its own inner elegance - in spite of my novice bungels - and now I honestly feel ashamed, in addition to the need to apologize to a machine for allowing a peasant into the Royal Grounds - so I am calling the Wise Ones in for this one.
       Crazy, I know, but to me a Mac represents something far beyond the ordinary  input ➛ process  ➛ output  title/function customarily assigned to a machine - I sense an odd kind of morality involved, one that I need to respect.
        So, these are my reasons for wanting to do a clean install, correctly.
            Thank you,  Truitt

  • Can anyone help please with my Time Machine, I have been getting the following message The backup disk image "/Volumes/Mac Backup/Stephen Smith's iMac.sparsebundle" is already in use.

    Can anyone help please with my Time Machine, I have been getting the following message The backup disk image “/Volumes/Mac Backup/Stephen Smith’s iMac.sparsebundle” is already in use.

    See > http://pondini.org/TM/C12.html

  • Help with cropping & sorting images prior to export for print

    I have large project (wedding) within which I've sorted images into several folders (pre-wedding, church, family portraits, etc.) within which there are smart albums based on my ratings. I also have a generic "5 Star" album at the top level which contains the final images that have been adjusted and which the client has been provided with in order to choose from.
    I now have a list of print requirements from the client (image name, size, and quantity).
    I'm curious to know what the quickest way to sort and tag the images selected for print, particularly in view of there being a number of different size requests for the images which are to be printed.
    Also - I'd value opinions (based on experience) on whether I should bother cropping to size for images that are 5x7 and 8x10 (the default ratio is 2x3 at the moment).
    The bottom line is that I'm trying to minimise the amount of time I spend on print tagging and cropping prior to export, and post export sorting prior to sending off to the lab.
    Thanks,
    Paul

    To answer your questions:
    I am assuming that you want a new version of the crop size especially if you have an image/s that are required in multiple sizes like 8x10 and 5x7 the image would end up in each crop size album so you would have two versions one for each aspect ratio and doing the new version in the context of the album would make in the album pic so that the proper one will be at the top of the stack in each respective album.
    Orientation does not matter with the stamp it will work fine - if you have an issue let me know.
    with respect to the stamp - the stamp will position the crop relative to the one you lifted - if your lifted crop is in the middle then so will the stamped ones.
    As for adjustment of the crop - just click on the crop tool, the click on the browser image and arrow through the images with the crop tool open - you can drag the crop around for each one with a minimum of keystrokes.
    Try it and hit me back with issues. I do this all the time and it is about 3000x quicker than my old workflow 5 years ago. For that matter the power of albums, stacks, and stack picks for this kind of thing is fabulous, there are a million ways to use it to speed things up. Bonus is that you are not copying anything so it is virtually free from a resource perspective.
    Last but not least I would think twice before using a smart album to do this, youi really do not want the content changing in this type of album, it will not save you any time, I would use static albums in the manner that I suggested.
    RB
    Ps. If you are interested in the ins and outs of Aperture organization features check out my PDF on the subject there is a bunch of stuff like this.

  • Please please help trouble with exported quality

    please please help me> i have been searching the net for over 3 hrs for a solution and whatever I have found has been a little too technical for me . I am uploading video to i movie from a disk. the file types on the disk are mp4. I am then editing the clips on iMovie '09 when I go to export the movie I am chosing to export movie as a "large" 960x540
    .mov file. The quality ***...it is blurry and grainy and unusable. Someone in another forum told me to run the mp4 movie in quicktime and tell them what movie inspector says about the clip. Movie inspector says:
    Formatt: Apple MPEG4 Decompressor, 640 × 480, Millions
    FPS: 29.97
    Playing FPS: 30
    Data size 129 MB
    Data Rate: 1504.39 kbits/s
    Size 640 x 480
    I am dying over here any help please? and thank you all so much

    once I share to the media browser where does it go? cant find it.
    It's "hidden" in your user folder Movies>iMovie Projects. Right-click (Control-click) on the name of your Project and select "Show Package Contents". In the folder named Movies you will see your exported file. It could be either a .m4v or .mov file, or possibly another type, depending on whether standard definition or high definition and the size option chosen when exported. If you are producing a DVD, you drag the file from iDVD's Media-Movies pane onto the Theme background.
    Also, when sharing to the media browser I can only save it as "medium" quality...the other choices arent available?
    Then AppleMan's earlier advice will be correct (as always) - he recommended using the Medium setting based on your QuickTime details. It appears that your original MP4 video has an aspect ratio of 4:3, unless your Project settings are incorrect. You set the dimensions (standard 4:3, widescreen 16:9 or iPhone 3:2) of the project in File>Project Properties then selecting the General tab.
    In iMovie '09, I've mainly worked with AVCHD video which produces .MTS files that are converted to AIC (Apple Intermediate Codec) on import. This is high definition footage which iMovie can import as 1920 x 1080 or 960 x 540 (both widescreen 16:9). Hence, on export I can share at Large (960 x 540) or HD (1280 x 720). I'm not sure why you are only seeing a Medium option - could be due to the aspect ratio or maybe it's standard definition in MP4 format (just guessing!). If other options are greyed out, have you tried ticking the boxes - that activates each option for me.
    John

Maybe you are looking for

  • Month view and detail view show different times

    I'm importing this calendar: http://www.mychurchevents.com/calendar/ical/2330512/public.ics?tz=z88 Here is my problem: The meeting shows in Month view as 10AM, but the details show 9AM.  9AM is the correct time.  It's only a problem during Daylight S

  • Specification documents o internal and external programs documentation

    I have to make some changes in the specification documents o internal and external programs documentation. I want to know i there are defined some standard conventions about the technica objects name and the requirements documentation. We have made s

  • Spot colors merging?

    Hello everybody! I was recently assigned to do the layout / editorial design of a small magazine. It consisted of illustrations by various artists and was printed with two inks. A typical situation I would say. I asked all the illustrators to send me

  • SA_MAGIC header corrupt on ZFS causing kernel panic in S11.1 SRU5.5

    I have a number of Sun Fire x4500s and x4540s running S11.1 SRU5.5. One of the x4540s has recently started kernel panicking within minutes of powering on and sharing its file systems over NFS (it provides user directories for a computing cluster). If

  • Audition is unable to start correctly (0xc000007b)

    I have had no other issues with CC products apart from this. I have Adobe CS5.5 installed, is this the reason why it wont start? Thanks.