Help please with MCC4 car phone kit

I have just bought a 2 year old car with a nokia MCC4 car kit, it does not fit my existing phone which is a 5210, can anyone please advise on which phone will fit the kit and whether I should or can upgrade the kit without ripping out the trim of my nice new Jag.I have tried a Nokia 1100 and this fits but this is a very basic phone and I am not sure if I can still get one. Thanks

OK your car kit is a cark-128 which is compatable with Nokia 3310 & 3330 phones. Your Nokia 5210 is not car kit compatable so you will have to either buy an old 3310 phone or upgrade your phone & kit to a full new system. You can still buy the nokia 1100 which is now 1101, but its not going to sit & work properly in your existing kit.
Any profesional car kit installer will be able to take out you old kit & refit a new one without damaging you lovely new Jag.
Good luck & hope this helps.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Similar Messages

  • Can someone help me with apple care email id?

    Please help me with apple care email..

    I believe Express Lane can provide live chat via email. At least this is what I've just been told by someone in Applecare Agreements Administraton. Haven't tried it myself because right now there's a system glitch and it's not accepting my particular serial #.
    https://expresslane.apple.com/GetproductgroupList.do?PRKEYS=SG1
    Dave Sawyer wrote: I'm not sure why you marked your follow-up information as being the "correct answer".
    I've been seeing this kind of often. I think there's some misunderstanding about the use of Helpful and Correct. Don't know why; I would have thought it would be perfectly clear.
    Message was edited by: WZZZ

  • Hi I hav a 2010 Mercedes E350 an lost my iPhone. I nw have an I phone 4s my all my contacts are on the cars phone kit. Is there any way I can get the numbers from the phone kit onto my new iPhone.

    Hi I hav a 2010 Mercedes E350 an lost my iPhone. I nw have an I phone 4s all my contacts are on the cars phone kit. Is there any way I can get the numbers from the phone kit onto my new iPhone.

    If you were not syncing the contacts in your phone with a contact manager or cloud service, there is no way to get them from the car to the phone other than manually re-entering them in the phone.

  • Help please with FaceTime. The built in app seems to have disappeared from my iPad2. Bought it in Australia

    Help please with FaceTime. My built in app seems to have disappeared.

    If K Penguin's suggestion doesnt work, you will have to go to you iTunes and do a reset, that is if you do not have it in your back up library.

  • I can't connect my iphone 4 via bluetooth with my car phone

    I cant connect my iphone via bluetooth with my car phone. Bluetooth is switched on on the iphone and the car phone says ready for bluetooth telephony yet the phone just keeps on searching without connecting? Any ideas as Apple phone support doesn't start until 9am (not very accommodating for a company whose equipment runs 24/7)

    Car phone?
    You are trying to connect your iphone to another phone?

  • Little help please with forwarding traffic to proxy server!

    hi all, little help please with this error message
    i got this when i ran my code and requested only the home page of the google at my client side !!
    GET / HTTP/1.1
    Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-shockwave-flash, */*
    Accept-Language: en-us
    UA-CPU: x86
    Accept-Encoding: gzip, deflate
    User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; InfoPath.2; .NET CLR 2.0.50727)
    Host: www.google.com
    Connection: Keep-Alive
    Cookie: PREF=ID=a21457942a93fc67:TB=2:TM=1212883502:LM=1213187620:GM=1:S=H1BYeDQt9622ONKF
    HTTP/1.0 200 OK
    Cache-Control: private, max-age=0
    Date: Fri, 20 Jun 2008 22:43:15 GMT
    Expires: -1
    Content-Type: text/html; charset=UTF-8
    Content-Encoding: gzip
    Server: gws
    Content-Length: 2649
    X-Cache: MISS from linux-e6p8
    X-Cache-Lookup: MISS from linux-e6p8:3128
    Via: 1.0
    Connection: keep-alive
    GET /8SE/11?MI=32d919696b43409cb90ec369fe7aab75&LV=3.1.0.146&AG=T14050&IS=0000&TE=1&TV=tmen-us%7Cts20080620224324%7Crf0%7Csq38%7Cwi133526%7Ceuhttp%3A%2F%2Fwww.google.com%2F HTTP/1.1
    User-Agent: MSN_SL/3.1 Microsoft-Windows/5.1
    Host: g.ceipmsn.com
    HTTP/1.0 403 Forbidden
    Server: squid/2.6.STABLE5
    Date: Sat, 21 Jun 2008 01:46:26 GMT
    Content-Type: text/html
    Content-Length: 1066
    Expires: Sat, 21 Jun 2008 01:46:26 GMT
    X-Squid-Error: ERR_ACCESS_DENIED 0
    X-Cache: MISS from linux-e6p8
    X-Cache-Lookup: NONE from linux-e6p8:3128
    Via: 1.0
    Connection: close
    java.net.SocketException: Broken pipe // this is the error message
    at java.net.SocketOutputStream.socketWrite0(Native Method)
    at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
    at java.net.SocketOutputStream.write(SocketOutputStream.java:115)
    at java.io.DataOutputStream.writeBytes(DataOutputStream.java:259)
    at SimpleHttpHandler.run(Test77.java:61)
    at java.lang.Thread.run(Thread.java:595)
    at Test77.main(Test77.java:13)

    please could just tell me what is wrong with my code ! this is the last idea in my G.p and am havin difficulties with that cuz this is the first time dealin with java :( the purpose of my code to forward the http traffic from client to Squid server ( proxy server ) then forward the response from squid server to the clients !
    thanx a lot,
    this is my code :
    import java.io.*;
    import java.net.*;
    public class Test7 {
    public static void main(String[] args) {
    try {
    ServerSocket serverSocket = new ServerSocket(1416);
    while(true){
    System.out.println("Waiting for request");
    Socket socket = serverSocket.accept();
    new Thread(new SimpleHttpHandler(socket)).run();
    socket.close();
    catch (Exception e) {
    e.printStackTrace();
    class SimpleHttpHandler implements Runnable{
    private final static String CLRF = "\r\n";
    private Socket client;
    private DataOutputStream writer;
    private DataOutputStream writer2;
    private BufferedReader reader;
    private BufferedReader reader2;
    public SimpleHttpHandler(Socket client){
    this.client = client;
    public void run(){
    try{
    this.reader = new BufferedReader(
    new InputStreamReader(
    this.client.getInputStream()
    InetAddress ipp=InetAddress.getByName("192.168.6.29"); \\ my squid server
    System.out.println(ipp);
    StringBuffer buffer = new StringBuffer();
    Socket ss=new Socket(ipp,3128);
    this.writer= new DataOutputStream(ss.getOutputStream());
    writer.writeBytes(this.read());
    this.reader2 = new BufferedReader(
    new InputStreamReader(
    ss.getInputStream()
    this.writer2= new DataOutputStream(this.client.getOutputStream());
    writer2.writeBytes(this.read2());
    this.writer2.close();
    this.writer.close();
    this.reader.close();
    this.reader2.close();
    this.client.close();
    catch(Exception e){
    e.printStackTrace();
    private String read() throws IOException{
    String in = "";
    StringBuffer buffer = new StringBuffer();
    while(!(in = this.reader.readLine()).trim().equals("")){
    buffer.append(in + "\n");
    buffer.append(in + "\n");
    System.out.println(buffer.toString());
    return buffer.toString();
    private String read2() throws IOException{
    String in = "";
    StringBuffer buffer = new StringBuffer();
    while(!(in = this.reader2.readLine()).trim().equals("")){
    buffer.append(in + "\n");
    System.out.println(buffer.toString());
    return buffer.toString();
    Edited by: Tareq85 on Jun 20, 2008 5:22 PM

  • Can anyone help please with my Time Machine, I have been getting the following message The backup disk image "/Volumes/Mac Backup/Stephen Smith's iMac.sparsebundle" is already in use.

    Can anyone help please with my Time Machine, I have been getting the following message The backup disk image “/Volumes/Mac Backup/Stephen Smith’s iMac.sparsebundle” is already in use.

    See > http://pondini.org/TM/C12.html

  • Help please with 2006 Macbook 13inch, for tv hook up.

    Help please with 2006 Macbook 13inch, to hook up to tv for streaming. The display works through VGA but the audio isn't working. Got a plug that goes into headphone jack on computer and connects into the audio jack on the back of tv but no sound. I'm not quite sure what the issue is, whether its the wrong plug, the tv, or the computer. Best Buy says this is the right plug and it seems that it would be, but who knows. If anyone has any experience in this, I would appreciate the help!

    Make sure those audio plugs are matched with the VGA plug. With your MacBook running something with audio switch between your sources on the TV Component, Composite and such. See if the sound is coming from another source. If so then you've got your audio plugs in the wrong jacks.
    Also could you post the make and model number of your TV.

  • Help Please with Driver

    I need to install the ADB Interface for the X2 onto my computer. Does any one know how or where I can get this driver?

    <Duplicate post.  Please see Help Please with Driver  for any replies.  This post will be closed.>

  • Car Phone Kit

     Hi, 
      I have a car phone cradle in my Land Rover that came with the vehicle.
      I am trying to find out what phones are compatable with it, the only details I can see are;
    FHC 500221
    06 100 0030 00000000
    TYPE HH-10
    MADE IN GERMANY
    07 00139/ 079619N 15
      All of the above is on a sticker with Nokia & Land Rover on it.
     Land rover are trying to find out for me but not having much luck.
    Any help greetly appricated.

    OK your car kit is a cark-128 which is compatable with Nokia 3310 & 3330 phones. Your Nokia 5210 is not car kit compatable so you will have to either buy an old 3310 phone or upgrade your phone & kit to a full new system. You can still buy the nokia 1100 which is now 1101, but its not going to sit & work properly in your existing kit.
    Any profesional car kit installer will be able to take out you old kit & refit a new one without damaging you lovely new Jag.
    Good luck & hope this helps.
    Danny b
    Nokia Accredited Installer
    If my answers help you, give me a Kudos. Its like a pat on the back.

  • Just got the Iphone 6 and it paired BT with the car phone system okay.  But it will not pair with the audio part where I could play my recorded music with my 5-C.  The system will not connect with the phone and the message is that the settings

    My toyota Seinna 2011 refuses to connect with my Iphone 6 as a "portable player".  Message says for me to adjust the player.  On the phone it is searching for other devices but not connecting.  Now same phone is paired with the car multimedia system and will take and make calls.  Help!

    I very much doubt it  if you consider how much data Apple release to App developers
    to allow them to create apps that  work under iOS
    Audi being lazy like most of the other motor manufacturers
    They will be registered developers and as such get all the info and data they need

  • Help Please With iPod Player On My 3GS

    Hello, Could anyone help me with a problem with my iPod part of my iPhone 3GS. The iPod will start to play my desired Playlist, but during the playback, the track album covers forget the last played track and franticly search for it. The album covers can rotate for ever and eventually lock the phone up and steel the album cover images at random. I have to then re-sync with iTunes to get them back. My last 3G phone did the same thing and I had it replaced, but still the same with the new 3G. Now I have a new 3GS, so the problem must be in iTunes Folder. I have a lot of tracks & platlists so I don't want to rush to reformat iTunes. Any ideas please? Jeff

    I'm having the same issue - did you ever find a solution?

  • Help please with bbm

    please help me   it started my phone saying upgrade again twitter and bbm so i have upgrade it
    now i cant get on to bbm i put my user name and password but it saying
    enter the username associated with this phone
    ???  i have put my blackberry id and password in 
    i have reset it all and it still doing it grrrr  

    http://supportforums.blackberry.com/t5/Downloaded-applications-for/HOWTO-install-BBm-6-2-if-you-have...
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Help please with n81 8gb

    i have a nokia n81 8gb and tryed putting free unlocking codes in myself i been told if you put them in more than 2 times you cant put them in anymore is this true ???
    is there anyway round it eg. like taking the battary out and leaving it for a couple of days ????
    please can anybody help
    please email on thanks
    *moderator note: e-mail address removed for security reasons*
    Message Edited by spanishtaco on 10-Jun-2008 10:36 AM

    I think the OP means the network unlocking code so that the phone can be used on networks other than the one that provided it in the first place.
    I do believe that it is indeed the case that 3 failed attempts to enter the code does result in the phone being locked, meaning a trip to a Nokia care point to have it re-flashed, but don't quote me on that. I'm not 100% sure.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Need Help Please with Flash Professional - No Cursor Change on Buttons/Links in Mac OS

    Hi Folks, I am relatively new to Flash Professional but I recently built a very nice flash website with very little problems.  I noticed after I uploaded my site to my server, that my mouse cursor did not change from an arrow to a finger on any of my buttons.  It did change on the hyperlinks, but not on the buttons.  Everything still worked fine but there was no indication to the user that an object was in fact an interactive button.  I found this code:  button1.buttonMode = true; button1.useHandCursor = true; and inserted it for all my buttons and that seemed to fix everything, I tested the site on firefox, ie, and safari.  I am using a PC with windows 7.  When I went to check the website on a Mac powerbook, the cursor did not change on any of the buttons and it does not change on any of my hyperlinks either.  I have searched all over trying to find a solution and have had no luck.  Can anyone please help me with this problem or point me in the right direction?  Any advice would be very much appreciated.  Thanks so much!!!

    Thank you so much for replying!  I did in fact let flash professional create the HTML page for the site and have not altered it at all.  Would you have any other suggestions as to why it's not displaying my links/buttons on a Mac?  I checked out the browsers Firefox, ie, and safari on my pc, but looking thru safari on the Mac, the cursor does not change on any of my links or buttons.  Thanks again so much for the reply, nice to hear from a human instead of reading thousands of posts!  Very much appreciated!!!!!

Maybe you are looking for

  • Image capture doesn't work after upgrading to 10.6.8

    On my macbook pro image capture is not working since I have upgrade to snow leopard 10.6.8. Please advice.

  • Invalid cursor state error while executing the prepared statement

    hai friends, following code showing the invalid cursor state error while executing the second prepared statement. pls anyone help me String query = "select * from order_particulars where order_no=" + orderno + " order by sno";             psmt1 = con

  • Preview pdf files in Safari before potentially save them

    In fact I have 2 questions: when I do a web search if I click on a link to a pdf file, 2 things can randomly happen :      1 The pdf opens in a safari window and I can directly read it (that's what I want)      2  The pdf file is directly downloaded

  • How can the browser auto-refresh not be considered a bug?

    I have been browsing these forums and I have seen this issue over and over again being discussed and the answer is always "that's not a bug, that's how it works, you can't change or disable it." Here is the problem. In ios 7, when you are using Safar

  • Oracle Import from 9i into 8i

    I have one important question: Is there a way to make an export from a schema in Oracle Version 9 that I can import into Version 8? Thanks for your assistance Daniel