HELP REQUIRED FOR GREETING CARD SIZES IN PSE10

I've wasted hours trying to find how to obtain 5" x 7" folded greeting card sizes. The default menu only offers four sizes, all for flat cards but according to the Adobe Photoshop Elements 10 "Classroom in a Book" I should be able to select a 5" x 7" folded postcard using "Shutterfly". I have visited the "Shutterfly"website but it appears to only support US/Canada residents. Any suggestions, other than moving to the USA/Canada, on to how to overcome this problem would be most welcome.

Suggest that you enhance your picture file in Elements, then save it.
Use a program such as WORD, and utilize templates which can be downloaded from http://www.avery.com.
For example, #3378 is a Half-Fold card, 5.5 x 8.5", designed for their paper stock. http://www.avery.com/avery/en_us/Search/?dimsearch=true&N=0&Ntk=All&Ntx=mode+matchall&Nty= 0&Nr=AND%28SITESCHANNELS%3AAvery.com%29&Ntt=3378&x=16&y=7
Insert the picture, add your text, and you're ready to go.

Similar Messages

How can I set up the printer for a custom size A7 OR 10X7 FOLDED GREETING CARD SIZE?

My new HP 7610 wide format printer does not have a "custom" paper size selection area. A 5x7 folded (open:10x7) greeting card is surely the most popular greeting card size but is NOT included in the printers size selection area- so - what to do?

I understand that the paper size is supported but not while printing from Windows:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03618348&tmp_task=prodinfoCategory&cc=us&dlc=en...
Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
(Although I am an HP employee, I am speaking for myself and not for HP)

Best product for Greeting Card?

What Adobe product do I need to custom make professional looking greeting cards and be able to print them out. I upgraded to Windows 7 and my old Corel software is not compatible. Thanks for any help.

I use Greeting Card Factory DeLuxe
http://www.novadevelopment.com/software/greeting-card-factory-deluxe-129405?meta=software& cat=print-creativity-software&sub=desktop-publishing-software
Check at Staples. It's on sale there from time to time

Setting margins for Greeting Cards and centering image

When we try and set up printing a greeting card from iPhoto 6 on a portrait card the image is always too close to the right hand edge, i.e. there is a white margin between the image and the fold - and this margin is larger than the margin on the right hand (outer) edge of the image. How can we centre the image keeping it on the right hand side of the greeting card?
We tried using a custom paper from page setup - but the custom size dropped off the menu when we went into the print menu.
Thank you.

Dai the dig:
Welcome to the Apple Discussions. If you have a 3rd party editor that supports layers you can print a card without any border. Look at Tutorial #8.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How do I print to both sides of paper for greeting card on Brother Printer

I did not find the answer on the forum. I have iLife 09 and this Brother MFC-790CW printer. I do not see any automatic setting for printing on both sides. I am using a iPhoto greeting card template and it looks OK with a page one for the front and a page two for the back.
Maybe the only way is to print out all the fronts pages (20) and then put the paper back in and print all the pages 2 (the text inside of the card). That seems like it would be faster than other ways, except automatic.
Obviously I should have done this a month ago and sent the project to Apple, but now I have no more time. Ii have the right paper for the one fold cards and plenty of ink

You need to have an image editor that supports layers. If you do follow the directions in these tutorials:
#8 - Printing a iPhoto Greeting Card
#8a - Printing a iPhoto Greeting Card to Standard Stock Sizes
Here are some editors that support layers:
Some Image Editors that support layers:
Photoshop Elements 8 for Mac - $79
GraphicConverter - $45
Rainbow Painter - $30
Acorn - $50
Pixelmator - $60
Seashore - Free
Portraits and Prints - Free
GIMP for Mac - Free
You might be able to use Pages instead of an image editor.
Happy Holidays

Elements 10 sizeproblem with for greeting cards or photo collage

I am having difficult creating a greeting card, I do not have folded landscape option. also when I try and create a photo collage, the response is Valid size not avalable for this creation Why

Start by trying this:
http://forums.adobe.com/message/4248688#4248688

Help required for unicode compatibilty

Dear All,
We are in a process of analyzing the impact of unicode compatibility for our environment.
Following is our scenario:
- ECC6.0 is non unicode systsem
- Need to buid unicode CRM 7, SCM 7, PI 7.1 and BI7
- Need to integrate the above systems to non unicode ECC system.
Our questions are :
1. Is there any performance consideration when using communication between an Unicode and non-Unicode system?
Is Unicode - Unicode faster than Unicode - non-Unicode communication performance wise?
2. Do we face any technical or functinal problems while trying to integrate
unicode BI/ NW Java Stack to non unicode systems.
3. Do we need to review our sizing estimations due to unicode implemenation?
5. what will be the storage consumption increase for unicode systems compared to non unicode?
It would be greatly helpful for me if you can clarify these doubts.
Thanks and Regards

Hi,
1. I think no one has really measured this. I expect a slightly higher requirement for Unicode <--> Non-Unicode interfaces.
2. Please have a look at SAP Notes 838402, 73606, 975768 and 1358929 for restrictions in Non-Unicode systems. SAP highly recommends to go for Unicode in the whole landscape.
3. and 5. If you use the SAP quicksizer (http://service.sap.com/quicksizing), then Unicode is integrated.
" Please note that the Quick Sizer results include Unicode requirements. For more
information on additional requirements caused by Unicode, see
http://service.sap.com/unicode -> Unicode Media Library -> Unicode information on
specific topics: SAP Business Suite Unicode Hardware Requirements"
Best regards,
Nils Buerckel
SAP AG

Software for greeting cards

I have no idea where to post my question, so I'll begin here.
Is there software available for Macs that will enable me to print my own greeting cards, e.g., birthday cards, thank you notes, get well cards, etc.?
Thanks!
eMac Mac OS X (10.3.9)

We’ve got a family business (small plug!: http:/www.richardwoodgate.internet-today.co.uk) producing a range of prints, laminated bookmarks and cards from original watercolour and acrylic paintings. The images used are all stored in iPhoto and then we print from iPhoto to our Epson printer in N-up format (Epson only setting?) which prints multiple images to a sheet - usually 6 or 9. We then cut them out by hand with a straight-edge/guillotine and use double sided tape to attach them to the front of the cards which we buy in from a wholesaler with matching envelopes and cellophane bags for display.
The book marks are produced in Pages - images and text are arranged and formatted before being ‘grouped’. Each bookmark is then duplicated to fill the sheet and then sent to print.
We are expanding into printing directly onto the front of cards and producing cards with messages inside. For the time being, we will be using some ‘in-house made’ Pages templates as and when our new printer arrives.
To be honest, it is a bit of a crude setup, but it works wonders, and the speed and efficiently of the Mac enables us to produce and market top-quality goods. Any image manipulation is done using The GIMP.

Any video tutorials for "Greeting Card Shop?"

Hello. I just purchased Greeting Card Shop from the Mac App store as a viable alternative to my PC version of The Print Shop. There are no directions. Are there any video tutorials for this program (a la "Video Professor")? Thank you.

There's Mac 101 which contains many short videos on various features. And also Switch 101

Best program for greeting cards

which is the best adobe program for layout or creating custom greeting cards? Something like publisher, where I can take the graphics created in photoshop place them in a card template or layout and give them to the printer to run off?

Hard to say, really. The forums are set up assuming people know the answer to the question you asked. Perhaps the Design discussion forum might be a place to start. Although now you have the answer I gave above: InDesign. You might want to visit there and take a look around at what people are talking about.
There was a discussion about how to do greeting cards in the last couple of days: http://www.adobeforums.com/cgi-bin/webx?128@@.3bbda6c9
Dave

PCUI 4.0, Search Help Required for New field

Hi everyone
I am working in CRM 4.0 Sales Order application
We created a new field in CRM sales Order in Header level in SAP GUI through EEWB.
The search help for the new field is working fine in SAP GUI. We want to add the same field with F4 help functionaliity in PCUI as well.
The field has been added in structure CRMT_BSP_SLS_OD1_General. It also shows domain value for the field however Origin of input field ie empty
The field has been added in PCUI and is successfully showing data inputted in SAPGUI
However we need search help functionality for the field
i tried these two steps
1) i checked on domain value checkbox and changed the field from input to dropdown. However the dropdown is empty in PCUI. Whenever i check box domain values for some field then all the possible values in SPA GUI are displayed in PCUI, however this is not working here.
2) I put Value_table in F4 of the field
This is also throwing up empty values
Am i missing something in this case
Please let me know how to go about it
TIA
Asad

Hi Frederic
Thanks for your response
I am not sure what is meant by regenerating the field group in this case
I added the entries for my view in the field group and generated the layout of the field group (If this is what you mean)
The field is working fine. I am able to save values to the field and able to see values saved in GUI.
I haven't linked search help of the field in PCUI
I am not sure how to go about it.
I used the data element in the structure for the field.
The data element has Domain entry in <b>Entry Help/Check</b> of the structure
If i check the Domain Value checkbox in my field group then the domain values should be available in dropdown if the field is dropdown
However i am not able to see the possible values of the field (It is present in SAP GUI)
Does something else needs to be done in this case
TIA
Asad

Seeburger help required for 810 and Dispatch Advice (IDOC type DESADV).

Hi All,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
I have understand blog for 850 -- /people/rajeshkumar.pasupula/blog/2009/08/05/wanna-implement-seeburger-for-edi-find-the-booster
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
Regards

Hi Rickkk,
1. Please let me know blogs which clearly shows settings for Seeburger components for 850 (Purchase Order) to IDOC Scenario
--- Seeburger Workbench
--- Seeburger Mapping Designer (BIC)
--- Seeburger Counter and Varaibles
--- Seeburger AS2 Spoke
--- Any other Seeburger Component setting required
For SEEBURGER workbench please go through this blog and navigate the enbebbed links furthur to know about Seeburger workbench too.
/people/prateek.srivastava3/blog/2009/08/01/seeburger--part-1--the-basics
2
2. Anybody has blog for 810 or Dispatch Advice (IDOC type DESADV).
For 810 i think the procedure would be the same but themseeburger mapping program that validates the ANSX 810 would be different.As far as 997is concerned 997 is a functional acknowledgement.Its a genric format that is used to send acknowledgement for any EDI transaction set that has been sent.
3. Can anybody provide me Mapping Logic (at field level) done in XI/PI for 850, 810 , Dispatch Advice (IDOC type DESADV) .
The logic will be based on the trading partner guidelines which will contain the description of all the semantic and syntactiic description about the segments ,its feilds.we need to consider the guidelines and target side specifications too while mapping.
Thanks,
Ram.

Efilogin-helper requires for the discrete graphic card

After updating to the latest version of osx on my 2014 macbook pro 15.
There is a process named efilogin-helper always requesting for the discrete graphic card and taking the energy and CPU..
Is there any solution to fix this problem??

I have to use a software to change the graphic card to integrated one only..

Help! Urgent help required for adjusting image

Hi - hoping someone can help.
I sent the attached PDF - http://www.sensecreative.co.uk/custUploads/SENSE-36-7977-95928/77317/SENSE-36-7977-95928-7 7317-2440.zip - to print with Sense Creative. The cards were printed and they've turned out quite visibly green on the reverse (where it should be white).
I've printed the artwork on several printers I have access to and it looks as it should, however SC are saying that the issue is with the artwork
"The green tinge you see on the reverse of these cards is prevalent in the artwork. The makeup of the background is approximately c-15 m-11 y-15 k-0. the predominant levels of the yellow and cyan will give you the green tint. Upping the levels of the artwork in or substituting the cyan, magenta and yellow levels with more black in Photoshop will likely give you the result you require. We are satisfied that in both instances, the artwork has printed correctly and the colours are well within tolerance given the nature of the artwork."
So, I'm in a bit of a pickle as the cards are needed for an event next week.
How do I change the image levels? Or are they talking nonsense and trying to pass the buck?
Help!

station_two,
Acrobat View> Tools> Print Production> Output Preview: Object Inspector will call out the objects' profiles if you click on each one individually (in this case all appeaar to be "Device CMYK" or Untagged CMYK)
untagged CMYK has the same pitfalls as untagged RGB... if one applys or assumes the wrong SOURCE PROFILE it doesn't CONVERT colors to Monitor RGB or Print Space correctly

Help required for Excel Pivot.

Given below my data table with sample data.
I have a requirement to create a pivot template as shown below. Data should be displayed group by Year and Allowance name. For each year, I have to get the sum of points earned by each allowance and the balance points exists for that particular year.
How can I achieve this using Pivot in Excel? Please help me on this.

Hi,
In BOM, there is onr item category "R", variable size item is there. Using this you can achieve this. By exploring the Variable size item you can get some idea.
Regards,
V. Suresh

HELP REQUIRED FOR GREETING CARD SIZES IN PSE10

Similar Messages

Maybe you are looking for