Help required in exploring collaboration feature

Hi All,
I am a newbie in oracle BPM, wanted to explore collaboration feature in oracle soa suite 11.1.1.7 version.
followed the document as on http://www.oracle.com/us/products/oracle-bpm-11g-report11117-1908473.pdf
I need help in exploring the feature as per the screenshot on page no 12 on the above document.
feature: the left dashlet where written: *"Members, James Cooper Participant ..."*.
Please help.
Thanks in advance

Hi Siva,
Firstly get the complete details of the collabration ,what it does ,why it is used and how the configurations are made ,i am provding you the maximum information hope it would help you any more queries get back with reply.
Collaboration Launch Pad (CLP) allows portal users to manage their contacts and launch services for collaboration. Users use a link in the tool area of the masthead to launch the CLP,then activate clp and Activate the technical component Real-Time Collaboration (RTC).
RTC provide the standard services instant messaging and application sharing.
With these technical components, you also activate the Real-Time Messaging Framework (RTMF). In the portal, the RTMF is the technical infrastructure for transferring real-time event between servers and clients.
so, After installing the Collaboration component in SAP NetWeaver, you need to complete a number of configuration steps in order to fully implement Real-Time Collaboration (RTC) in the portal. RTC provides both application sharing and instant messaging in the portal.
for the steps You can look into these steps which would help you :
http://help.sap.com/saphelp_nw70/helpdata/en/07/3d9b40e8192a54e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/07/3d9b40e8192a54e10000000a1550b0/frameset.htm
Thanks&Regards,
Aswinchandra Girmaji

Similar Messages

  • Collaboration features

    Hi All,
    We have a requirement to enhance collaboration features,find the below information.
    Software:CUCM,CUC,Presence,UCCX=8.X version.
    Hardware:UCS C200 M2 server
    As i gone through documents jabber will supports on version 8.x,my doubt is should i need any up gradation or with existing setup i can use the jabber features,advice me on this !!!!

    Any suggestion ?

  • "Adobe Acrobat 9 Pro requires Internet Explorer 6.0 or greater"

    Adobe Acrobat 9 Pro requires Internet Explorer 6.0 or greater is the error that jumps up when I try installing it. Currently this system is running Internet Explorer 7 which is installed at it's default location. Any clues what can have gone wrong?
    Version 7.0.5730.13
    Build 75730
    Program path C:\Program\Internet Explorer (Swedish computer)
    Language Engelska (USA)

    I came upon this post after receiving this error message when trying to install Acrobat 9. In my case, we deploy Acrobat from an Administrative Installation Point (AIP) using Group Policy. I believe the user at this computer pulled the plug while the group policy deployment was taking place. I got the error when trying to install the program manually afterwards.
    I was able to rectify the issue by running msiexec.exe against the MSI in the AIP with the /x switch, performing an uninstall:
    msiexec /x \\server\deploy\AcrobatStandard9\acrostan.msi
    (The program was not showing up in Add/Remove programs, otherwise I would have tried uninstalling from there.) After that, the install proceeded successfully.
    Hope this helps someone.

  • Help require with installing Adobe Acrobat onto my Macbook Pro Retina.

    Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
    I have successfully installed all of my creative cloud apps with the exception being acrobat.
    I cannot print from Indesign to PDF.
    I have unistalled, reinstalled and still no Adobe Acrobat.
    I now have to go back to Windows 8 and create the PDF's there.
    Any one know how to get around this issue?
    Thanks in advance
    Kelvin

    OSX has effectively killed the ability to print to pdf, (print to pdf eliminates most of the "Rich features" of current pdf).
    Export from InDesign, always, excpet for the 1% of the time where you know why print to pdf would produce a better result.

  • Adobe Reader 9.x & 8.x "requires Internet Explorer 6"

    Friends PC in Italy had Reader 9.0 (Italian) installed and working fine. It has had Reader in various versions Italian & English over the last 5 years with no problems.
    Tried to update it to latest/securist version but got an error message that the update had failed in Italian (which I don't read)..
    Decided to uninstall and reinstall the latest version instead.
    Uninstall went through fine via control panel with no errors.
    Installing the 9.1.x Italian or English for XP SP3 (and also the 8.x.x) all fail every time with, the English version error message saying (and the Italian also) every time at c99% of the Nosso Adobe download manager:
    "Adobe Reader 9.1 requires Internet Explorer 6.0 or greater. Please visit www.microsoft.com to upgrade Internet Explorer."
    XP is XP Pro SP3 (Italian)
    MS IE about says 7.0.5730.13
    Belarc advisor reports Microsoft Corporation - Internet Explorer Version 7.00.6000.16850
    Have followed the MS KB 917964 tips to (a) reset IE7 and (b) Reinstall IE7 with no change in Adobe Reader symptoms = stuck without Reader which is not a happy place to be.
    HELP anyone ?
    MK

    Thanks, MK. I was hoping the fix would be as simple as modifying an entry in the registry but everything seems to be in the proper order this far. I have seen a resolution to this issue which involved using a program named Orca to modify the MSI installer package so that it foregoes checking for IE but that should be totally un-necessary and it a fairly technical approach. I can provide you those directions if you are interested but I'd rather have you check a few others things first to see if we can actually get to the root of the issue.
    First, let's try running a few Microsoft tools to hopefully resolve any errant registry or disk issues:
    Cleanup temporary files:
    1. Open My Computer
    2. Right-click the C:\ drive > click Properties
    3. Click Disk Cleanup > place a checkmark in all options except "Compress Old Files" > click OK
    Repair file system issues:
    1. Open My Computer
    2. Right-click the C:\ drive > click Properties
    3. Click the Tools tab > click Check Disk
    4. Place a checkmark in "Automatically fix file system errors"
    Repair registry:
    1. Disable any anti-virus software that may be installed
    2. Go to: http://onecare.live.com/site/en-US/center/whatsnew.htm
    3. Click Full Service Scan
    4. Install any necessary plugins when prompted
    5. Run the complete scan when prompted and allow it to fix any issues it finds
    Since we are dealing with an Italian version of the OS, the site may redirect to the Italian version of the site (hopefully one exists). The OneCare Live safety scanner is meant to be a security tool for removing malware (not great at that part of its job) but it also includes a registry repair tool that has resolved many odd registry issues I have encountered since finding the tool.
    Finally, if none of the above fixes the issue, Adobe has a tool named CS3Cleaner which removes all traces of the Adobe SC3 suite. In doing so, it has proven to also remove most, if not all traces of ANYTHING Adobe. Uninstall all Adobe products prior to using this tool and see if it doesn't clean up any miscreant traces of the corrupted file and/or registry that may be causing the issue.
    CS3Cleaner: http://www.adobe.com/support/contact/cs3clean.html
    My bag of tricks is getting thinner so if this doesn't fix the issue, I will have to dig deep to see what else I can come up with.
    Best of success!
         Michael

  • Adobe reader 9.4.0 requires Internet Explorer 6.0 or greater

    Hello,
    I have a user who has reported Adobe Reader was not installed on his PC, which we complete via GPO as default for all our computers, and has never been an issue (WinXP and Win7 (x64) ).  When attempting to install the reader manually, I received "Adobe reader 9.4.0 requires Internet Explorer 6.0 or greater"  This is a Win7 box.  It comes with IE 8!  Can anyone point me to the registry path the installer is looking for to determine the version of IE?  I've checked HKLM\Software\Microsoft\Internet Explorer and verified both "Version" and "W2kVersion" read 8.0.7601.17514.
    I realize Reader X is available.  We're not ready to deploy it yet.  So any suggestion other than simply "install Reader X"  is greatly appreciated!
    Thanks for your time.

    I know I'm considerably late to the reply here, but I had the same issue with a Reader X install done via GPO.  This may be relavent info for the future, and may work for Reader 9 as well
    I read that someone had tried running the command line uninstall for an older version of reader, as it seemed to have not been removed completely.  I threw together a batch file to attempt to remove all the reader installs we had available along with the font packs.  Some of the font packs won't remove unless reader is present, so it re-installs the latest reader, removes the font packs again (to get whatever it missed) then reloads the font packs.
    So far this approach is 1 for 1.  Hopefully it helps out if you still need it.
    rem For ease of use, run this from an elevated command prompt
    rem Try to remove all adobe reader related items
    msiexec /x "\\deployment\adobe reader\font packs 10\adberdrsd1000_all.msi" /passive
    msiexec /x "\\deployment\adobe reader\font packs 10\fontpack1000_ja_jp.msi" /passive
    msiexec /x "\\deployment\adobe reader\font packs 10\fontpack1000_ko_kr.msi" /passive
    msiexec /x "\\deployment\adobe reader\font packs 10\fontpack1000_zh_cn.msi" /passive
    msiexec /x "\\deployment\adobe reader\font packs 10\fontpack1000_zh_tw.msi" /passive
    msiexec /x "\\deployment\adobe reader\10\acroread.msi" /passive
    msiexec /x "\\deployment\adobe reader\10.0.1\acroread 10.0.1.msi" /passive
    msiexec /x "\\deployment\adobe reader\10.1.0\acroread.msi" /passive
    msiexec /x "\\deployment\adobe reader\10.1.1\acroread.msi" /passive
    rem Install most recent version of adobe reader
    rem This must be updated manually to reflect the new version.
    msiexec /i "\\deployment\adobe reader\10.1.1\acroread.msi" /passive
    rem Try to remove font packs again because some of them fail if reader isn't installed
    msiexec /x "\\deployment\adobe reader\font packs 10\adberdrsd1000_all.msi" /passive
    msiexec /x "\\deployment\adobe reader\font packs 10\fontpack1000_ja_jp.msi" /passive
    msiexec /x "\\deployment\adobe reader\font packs 10\fontpack1000_ko_kr.msi" /passive
    msiexec /x "\\deployment\adobe reader\font packs 10\fontpack1000_zh_cn.msi" /passive
    msiexec /x "\\deployment\adobe reader\font packs 10\fontpack1000_zh_tw.msi" /passive
    rem Reinstall all the font packs
    msiexec /i "\\deployment\adobe reader\font packs 10\adberdrsd1000_all.msi" /passive
    msiexec /i "\\deployment\adobe reader\font packs 10\fontpack1000_ja_jp.msi" /passive
    msiexec /i "\\deployment\adobe reader\font packs 10\fontpack1000_ko_kr.msi" /passive
    msiexec /i "\\deployment\adobe reader\font packs 10\fontpack1000_zh_cn.msi" /passive
    msiexec /i "\\deployment\adobe reader\font packs 10\fontpack1000_zh_tw.msi" /passive

  • Disable Collaboration Features coming up in the popup window for somegroups

    Hi,
    How can I disable the Collaboration Features
    (Send Email,Create Appointment,Send InstantMessage,CreateTask etc )
    that come up in the popup window whn we click on the link provided just after user name. I know how it is to be done for all users. But I want it deactivate for certain groups only.
    Regards
    MK

    You need to configure command groups.
    Use following link:
    http://help.sap.com/saphelp_nw70/helpdata/en/98/dd48a9b4a197489a54187c99372bce/frameset.htm
    Regards
    Prabhakar Lal

  • Can I use a HP printer that requires Internet explorer?

    Can I use a HP printer that says it requires Internet Explorer with my Firefox Web browser?

    Are you talking about the HP Smart Web Printing program and Toolbar for Firefox?
    That application adds a few features to Firefox, but it won't stop the printer itself from working with Firefox. My advice is to download the latest version of that program from the HP website, and you'll probably find that the latest version of that application will work with Firefox 3.6.x versions.
    IMO, HP is lax about updating that application when Mozilla releases a new major version of Firefox, thus inconveniences their users unnecessarily for a few months while they take their time making an updated version - work they should have been doing when the new version of Firefox was being tested in the Release Candidate phase.

  • Solutionbank requires internet explorer v6 or higher

    Hi,
    I recently bought a new computer with Windows 8.1 which uses Internet Explorer 11 and have been unable to use a CD-ROM (supplied in a textbook I bought) livetext program on which there are stored answers. I desperately need to use
    this as I have exams in about 2 months and am severely stressed so this is not helping at all since this is the only way I can check that I am doing my work correctly.
    On my old computer with Windows Vista I was able to open the program successfully but with this version I am unable to. I have tried Mozilla, Firefox and Google Chrome but they too do not work and anyway I prefer to use Internet Explorer.
    The program is an "Application (.exe)". Whenever I press the link to the livetext program (known as solutionbank) a message appears
    "solutionbank requires internet explorer v6 or higher".
    I have checked the Microsoft forums for help but no one seems to know anything about the issue.
    Thanks

    Hi,
    probably, this application software is performing a check of the browser version (using some custom/internal method known only to the software developer) and it doesn't like what IE11 has to say.
    Check the website or support information for this software, they may have a patch or update for it, to allow it to correctly recognise IE11.
    Because it's an application, and not a website, I can't see a way to get IE11 to tell a version lie, (although you might be able to do so if you try modifying the UA string in your browser).
    http://blogs.msdn.com/b/ieinternals/archive/2014/02/19/internet-explorer-and-everybody-else-version-lies-for-compatibility.aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Installation failed because a required role service or feature could not be installed. WS 2008

    Hi guys, i have a problem with a Server Windows 2008 SP1 Standar x86, when i tried to reinstall the role of WSUS 3.1 the ServerManager show this Error and i could install again the role.
    Thanks for your help:
    The Error of the event viewer is the nexT:
    Log Name:      Setup
    Source:        Microsoft-Windows-ServerManager
    Date:          27/03/2009 05:53:21 p.m.
    Event ID:      1617
    Task Category: None
    Level:         Error
    Keywords:     
    User:          DOMAIN\Administrator
    Computer:      SOOB.DOMAIN.COM
    Description:
    Installation failed. A restart is required.
    Roles:
    Web Server (IIS)
       Error: The server needs to be restarted to undo the changes.
    Windows Server Update Services
       Error: Installation failed because a required role service or feature could not be installed.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-ServerManager" Guid="{8c474092-13e4-430e-9f06-5b60a529bf38}" />
        <EventID>1617</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x4000000000000000</Keywords>
        <TimeCreated SystemTime="2009-03-28T00:53:21.056Z" />
        <EventRecordID>23</EventRecordID>
        <Correlation />
        <Execution ProcessID="1100" ThreadID="2736" />
        <Channel>Setup</Channel>
        <Computer>SOOB.DOMAIN.COM</Computer>
        <Security UserID="S-1-5-21-696557799-1245526101-3093723089-500" />
      </System>
      <UserData>
        <EventXML xmlns:auto-ns3="http://schemas.microsoft.com/win/2004/08/events" xmlns="Event_NS">
          <message>
    Roles:
    Web Server (IIS)
       Error: The server needs to be restarted to undo the changes.
    Windows Server Update Services
       Error: Installation failed because a required role service or feature could not be installed.
    </message>
          <identifiers>WsusRole, WebServerRole, WebServerComponent, CommonHttpFeatures, StaticContent, DefaultDocument, Performance, DynamicContentCompression, ApplicationDevelopment, AspNetPages, InternetServiceApiExtensions, InternetServiceApiFilters, NetFxExtensibility, SecurityComponents, RequestFiltering, WindowsAuthentication, WebServerManagementTools, InternetInformationServices6ManagementCompatibility, InternetInformationServices6DatabaseCompatibility</identifiers>
        </EventXML>
      </UserData>
    </Event>
    Alberto

    The above suggestions did not resolve issue in my case;
    I did the below to resolve this after lot of research and same worked for me in 3 servers;
    1)     
    Disable UAC  by Disabling the setting "User Account Control: Run all administrators in Admin Approval Mode", under Computer
    Configuration\Policies\Windows Settings\Security Settings\Local Policies\Security Options. And reboot the server
    2)     
    Remove all existing installed  features of dotnet 3.5 and reboot the server
    3)     
    Install Windows Process activation service using add features and reboot the server
    4)      NowInstalled Web(IIS)
    role  features which resulted in successfull installation

  • New Collaboration Features of the Portal

    Hi,
    Do anyone of you know when some of the “New Collaboration Features of the Portal” is released.
    I know that some of the features already are released, but I am especially interested in the new Team workspaces (next-generation of collaboration rooms) and the standard integration to MS Sharepoint.
    I found this document
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e00ddbb1-1d2e-2a10-75b0-add05c50ef00]
    which stats Q1 2008, but that does not seem to hold. So do any of you have more recent information about the release plan?
    Regards,
    Henrik Andersen

    Hi Henrik,
    The beta shipment of the first feature wave of the collaboration portal started end of March, as mentioned [here|https://www.sdn.sap.com/irj/sdn/nw-collaboration#section10].
    Only some selected pilot customers have access to the beta shipment. The features that you mention are included in this beta shipment.
    The Collaboration Portal should be available once the ramp-up phase is completed.
    You can find also further information in this blog by Vera Gudbrot: https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/9027
    Hope this helps,
    Robert

  • Basic Collaboration Features

    HI
    In terms of BI Reporting Users What are Collaboration Features available in SAP Portal.
    Currently i am analysing the Collaboration features which are easy to maintain that we can offer to our BW Reporting USers...
    I searched the form but couldn't able to ffind the relevant info
    Thanks in advance

    Hi maxicosi,
    There are various KM & collaboration feature available on portal like forums collaboration rooms, chat, mail,sharing of documents, search, subscription, work flow, time-based publishing.
    In one of my client, we have used KM extensively to publish dashboard on portal. Several BI dashboard for different countries. Thus folder were created for each countries in KM. Countries dashboard link were created in respective KM folder. We had used there subscription where user had subscribed to this folder. As soon as some dashboard is published all users respective to that countries were information by mail.
    You can even use broadcasting feature using BI repository where BI reports can be published in KM, you can even schedule BI report which would be published as well as sent in email.
    So thus depending on client requirement you can use following feature. Let me know if you have some other ideas for collaborating BI reports on portal
    Regards,
    Jigar Oza

  • Collaboration Features in CE

    Hi, folks!
    As we' re evaluating CE as EP, I wonder what collaboration features are available within this platform. OK, there are GP for modelling and execution, UWL for processing workitems. But what about the other stuff - people centric, synchronous and asynchronous collaboration, room infrastructure and groupware framework?
    Regards,
    Thomas

    Hi
    Since CE is light weighted product so in its initial release KM and Collaboration components are not included.
    further help : [Do CE  supports KM/Collabration?|CE KM;
    Best Regards
    Satish Kumar

  • XSLT mapping Help Required.

    XSLT mapping Help Required.
    Hi Experts,
    I am New to XSLT Mapping. I am practising the below Example:
    InputXML File:
    <?xml version="1.0" encoding="UTF-8"?>
    <?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
    <ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
    <Person>
    <FirstName>Anshul</FirstName>
    <LastName>Chowdhary</LastName>
    <Gender>Male</Gender>
    <Address>
    <Street>2nd Main</Street>
    <Houseno>83/b</Houseno>
    <City>Mysore</City>
    </Address> </Person>
    </ns0:MT_XSLT_Source>
    XSL StyleSheet File:
    <?xml version='1.0' encoding="UTF-8"?>
    <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
    Xmlns:ns1=”http://XYZ.com/Test”>
    <xsl:template match="/">
    <ns1:MT_XSLT_Target>
    <Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
    <Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
    </Name>
    <Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
    ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
    <City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
    </ns1:MT_XSLT_Target>
    </xsl:template>
    </xsl:stylesheet>
    The Desired Output shuold be:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
    <Title>Male</Title>
    <Name>Anshul Chowdhary</Name>
    <Street>83/b 2nd Main</Street>
    <City>Mysore</City>
    </ns1:MT_XSLT_Target>
    I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
    Anshul Chowdhary Male 2nd Main 83/b Mysore
    I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
    Regards,
    GIRIDHAR

    Hi,
    I have used below for testing.
    Input xml:
    <?xml version="1.0" encoding="UTF-8"?>
    <?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
    <ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
    <Person>
    <FirstName>Anshul</FirstName>
    <LastName>Chowdhary</LastName>
    <Gender>Male</Gender>
    <Address>
    <Street>2nd Main</Street>
    <Houseno>83/b</Houseno>
    <City>Mysore</City>
    </Address> </Person>
    </ns0:MT_XSLT_Source>
    xsl code:
    <?xml version='1.0' encoding="UTF-8"?> 
    <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen" 
        xmlns:ns1="http://XYZ.com/Test"> 
        <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/> 
        <xsl:template match="/"> 
            <ns1:MT_XSLT_Target> 
                <Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title> 
                <Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/> 
                </Name> 
                <Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '), 
                    /ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street> 
                <City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City> 
            </ns1:MT_XSLT_Target> 
        </xsl:template> 
    </xsl:stylesheet>
    For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
    Regards
    Venkat

  • Urgent help required: Query regarding LC Variables

    Hi All
    Sometime earlier I was working on a performance issue raised by a customer. It was shell script that was taking almost 8-9 hrs to complete. During my research I came across a fact that there were some variables which were not set, the LC variables were impacting the sort funnel operations because of which the script was taking a long time to execute.
    I asked them to export the following commands, after which the program went on smoothly and finished in a couple of mins:
    export LC_COLLATE=en_US.ISO8859-1
    export LC_MESSAGES=C
    export LC_MONETARY=en_US.ISO8859-1
    export LC_MONETARY=en_US.ISO8859-1
    export HZ=100
    export LC_CTYPE=en_US.ISO8859-1
    export LANG=en_US.UTF-8
    Later I did recover that setting the LC_COLLATE to C, is not helping and the program was again taking a lot of time. Few questions that I want to ask are:
    1. Can someone please tell me, what each of these variable mean and how these values make a difference.
    2. When I exported LC_COLLATE=en_US.ISO8859-1, it worked fine, but when i tried with the defalut value LC_COLLATE=C, then why the program didnt work.
    As this issue is still going on, hence I would request All to provide their valuable inputs and let me know as much as possible.
    Appreciate your help in this regard.
    Thanks
    Amit
    Hi All
    A new development in this regard. The customer has send us a screen shot in which they were trying to export the locale variable using the commands which I have pasted above. I can see in the screen shot that while exporting LC_COLLATE and LC_TYPE, they get a message that ""ksh: export: couldn't set locale correctly"".
    Request everyone to please give their inputs as it's a bit urgent.
    Thanks for all the help in advance.
    Thanks
    Amit
    Some help required please...
    Edited by: amitsinhaengg on Jul 22, 2009 2:03 AM
    Edited by: amitsinhaengg on Jul 22, 2009 2:06 AM

    LC_CTYPE
    Controls the behavior of character handling functions.
    LC_TIME
    Specifies date and time formats, including month names, days of the week, and common full and abbreviated representations.
    LC_MONETARY
    Specifies monetary formats, including the currency symbol for the locale, thousands separator, sign position, the number of fractional digits, and so forth.
    LC_NUMERIC
    Specifies the decimal delimiter (or radix character), the thousands separator, and the grouping.
    LC_COLLATE
    Specifies a collation order and regular expression definition for the locale.
    LC_MESSAGES
    Specifies the language in which the localized messages are written, and affirmative and negative responses of the locale (yes and no strings and expressions).
    You can use command
    # locale -k LC_CTYPE
    to see more detail about each type.

Maybe you are looking for