Help: Satellite M45 laptop w/Win7, cannot get any audio...

Hello,
I have downloaded a couple drivers, but i get an error when i try to install. Can someone please link me to a driver?? That is the problem right?
Thanks

The problem is that your model is not compatible with Windows 7. I sincerely doubt you'll get everything working properly on your M45 with Win7.
Toshiba laptop models supported for use with Windows 7
Mike

Similar Messages

Cannot get any audio on spdif coa

Im using vista 64 with a regular xfi xtreme gamer. I installed the newest drivers but cannot get any audio to output on the FlexiJack. The digital i/o setting is greyed out on the creative console. Ive tried everything i can and cannot not get any sound. I am using the Z5500. The receiver is across the room and my only choice is to use a long coax cable i have.

You enabled it in your windows speaker configuration under "playback devices" ?
You probably have to set it to default by rightclicking on it and activating it and set it to default!?
http://www.homeys-bunker.de/spdif.jpg

I have a bose docking station with a 30 pin connector and purchased the Ipod 5G and also have a Ipad4th Gen and have tried several connectors but cannot get any audio. Any suggestions?

I have a Ipod Touch 5G and a Ipad 4th Gen with a Bose sound dock with a 30 pin adapter. I have tried several connectors but cannot get any audio on the sound dock. Do you have any suggestions?

Have you tried this adapter from the Apple on-line store http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=3c They also have one that uses a cord to connect the dock to lightning that is $10 more.

Sony PFM-42V1: I cannot get any audio from monitor

I cannot get any audio from my PFM-42V1. first: I connected independent speakers via speaker sockets - result no sound. Then after reading its Manuel it suggested I connect headphones to the monitor's audio mini jack - again no sound. What I do not understand is it said if sound doesn't work with headphones - contact computer manufacturer. Any suggestions?

From your description it sounds like your using input 1 or input 2, you will need to feed a audio source into the 1/8 mini female jack (Fig. 1) next to input your using. This will allow the audio to pass to the speakers you've connected to the monitors speakers jacks (Fig 2). Also you'll want to make sure that within the Monitor Menu under Custom Setup that you have Speaker Out: On (not off).
Fig 1.
Fig 2.

I cannot get any audio from my iTunes account on my PC. Sound works fine with Pandora and everything else. Any ideas?

Help

Just to add, i have also set up the two email addresses and verified them within my icloud account, but still no sync to my iphone or showing on the icloud account...

I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

DVI interface does't allow audio. Is there optical IN from your Panasonic TV? By then you can connect your ATV to Panasonic using optical together. It will work.

I recently upgraded my 4s to a 5s. the verizon store took my old phone for a trade in. i cannot get any of my pictures to download from icloud. my photo stream folder only has a small percentage of the photos in it. any help would be greatly appreciated.

i recently upgraded my 4s to a 5s. the verizon store took my old phone for a trade in. i cannot get any of my pictures to download from icloud. my photo stream folder only has a small percentage of the photos in it. any help would be greatly appreciated.

That's possible if he didn't connect to a WiFi hotspot after taking them. I don't think the "Personal" Photo Stream uploads over Cellular, unless they changed it since the last time I used it.
If that's the case, then the photos likely didn't upload to Photo Stream and are stuck on the phone.
And you're not going to be able to get them back, either.

HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

I need help, cannot get any apps, needs serial number

I have a creative cloud membership and cannot get any new apps because it keeps asking me for a serial number when I try to liscence the software. I have tried everything on the forums including uninstalling and reinstalling, putting in my details again when asked to liscence the software. I have tried adding another app to see if that will work and it does not. I am so unbelieveably frustrated that I will have to terminate my subscription because it is ridiculous I keep paying for something I am not able to access.

simone-23, Follow some these steps, this should help.
Next confirm that this site comes up okay and you don't get an object error
https://lm.licenses.adobe.com/
I dont know which operating system you are working on so i am giving you some steps windows and MAC OS:
Windows:
In windows 7 navigate to following location:
/windows/system32/drivers/etc
1. look out for "Hosts" file
2. Open it with notepad
3. Check if you have any entry for Adobe
4. Remove the entries and try again launching any product from CS6
On Windows XP navigate to following location:
\windows\system32\drivers\etc
1. look out for "Hosts" file
2. Open it with notepad
3. Check if you have any entry for Adobe
4. Remove the entries and try again launching any product from CS6
Mac:
1. Please click on "Go" and navigate to /private/etc
2. Open "hosts" file and check out for any entries for Adobe.com
3. Remove the entries and save the file
4. try again launching any product from CS6
Thanks
- Nitin

I have a new laptop and I cannot get my iPhone 4 to sync to it? I have managed to copy my library onto the new laptop.

I have a new laptop and I cannot get my iPhone to sync to it?
I have managed to copy my library to the new laptop.

Are you saying that iTunes isnt recognizing your phone?

Hi, when I download wmv video files, I cannot get any sound. Youtube videos work fine but not wmv files? can somebody help please

Hi, when I download wmv files on my MacBook Air I cannot get any sound on the videos. Youtube videos work fine but not wmv files. Can anybody help please?

Install Flip4Mac which allows you to play wmv files.

HT4352 I cannot get any sound on my iPad when home sharing, yet do have sound when playing iTunes that I have loaded, please help?

I cannot get any sound on my iPad when using the remote app for home sharing, yet do have sound when I play iTunes that I have loaded on my iPad, please help?

You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

I have downloaded Fiefox 7 for my laptop running Windows 7. Now i cannot get any sound from web content. ( I can still get sound using Google Chrome !!) Any ideas ?

I downloaded Firefox 7 and now cannot get any sound when playing web content. I have reinstalled but still no joy. When I use Google Chrome for the same useage, it plays sound fine.
Any ideas ??

1. System Preferences > Other/ Flash Player > Advanced > Delete All
     Press the "Delete All" button
2. Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
   Download it first.
   The next step is important.
   Click Safari in the menubar and select “Quit Safari”.
    Follow the prompts and install it.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.

Numbers update error occurred and cannot correct. I went to purchases as directed by screen and cannot get any response to take action. Help?

During an update for Numbers an error occurred while I was away from the computer. I then got a message that an error occurred during Numbers update and to go to purchases to correct. Went to purchases and it shows that an error occurred but I cannot get any response to attempted commands. Any suggestions as to how I can get my Numbers application to update?

When I selected Purchases at App Store the screen showed:
                                                                                                             (Ccmmands shown)
Keynote               May 30,2014               Paused 0 bytes of 434 MB           Resume
Numbers              May 30,2014                                                                    Installed
Pages                    May 30,2014                                                                   Installed
OSX Mavericks     May 29,2014                                                                    Download
When I selected "Check for Unfinished Downloads" on the store pulldown menu it produced message "All purchases have been downloaded", the "paused" on Keynote line disappeared, and the "Resume" changed to "Installed."
I installed Mavericks update 10.9.3 on May 30, 2014, and 10.9.4 on July 8, 2014, with no error messages, just "Installation completed." The last previous updates of the 3 apps was May 13,2014, also with no error notice. Everything seems to be working as far as I know, so do you think I need to do anything?

I cannot get any of the zoom functions to work, period. When Firefox starts up it begins to display the page then it stops and redisplays it. So its like it flashes on for a second then completely regoes to the site, any site. The text zooms dont work eve

I cannot get any of the zoom functions to work, period. When Firefox starts up it begins to display the page then it stops and redisplays it. So its like it flashes on for a second then completely regoes to the site, any site. The text zooms dont work even when i try to change the font on the content tab, nothing. I have reinstalled firefox still no luck help,!!!!!
== This happened ==
Every time Firefox opened
== this month ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; InfoPath.2)

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Help: Satellite M45 laptop w/Win7, cannot get any audio...

Similar Messages

Maybe you are looking for